Premier Guitar features affiliate links to help support our content. We may earn a commission on any affiliated purchases.

Subdecay Blackstar Distortion Pedal

Subdecay Blackstar Distortion Pedal

Two Drive Knobs = More Tone Control

Here’s a high gain distortion pedal for anyone who’s ever driven their drive knob to the limit and wanted more. Subdecay''s Blackstar Distortion is a modest-looking little box with four knobs: volume, tone and two drive knobs. According to Subdecay, the bottom drive knob controls low frequency response (pre-gain) while the top one “increases the overall gain of these two stages through a feedback network.” In other words, you’re controlling your drive by first shaping your guitar’s sound and then applying the thickness. With this kind of variable control the effect is something like alchemy. The range of tone colors I was able to squeeze out of this little box was truly impressive. To have named this pedal “Kaleidoscope Distortion” might have been more fitting.

At the lowest settings it kicks up some dirt but doesn’t change the guitar’s tone. Moving the drives up together, the sound went from gritty to crunchy and thick. From there it took on a big, meaty rock tone before it topped out in a dense, saturated metal tone with a smooth, compressed sustain. Setting the drive and the tone controls independently produced as many different hues as there were combinations: smooth, crunchy, big and fat, lean and mean, thick warm fuzz, jagged razor-sharp squeal – it’s all here.

There are some drawbacks; the box is pretty small, with the knobs close together. I’m an incurable tweaker who likes to be able to nudge knobs with my foot, so that’s an issue for me. Also, you have to take the back off to change the battery, which frankly is a pain in the ass. There is the potential of losing four tiny screws while you’re setting up your gear. This may not be a significant problem if you’re using AC, but it could turn into one if you’re not, although battery life wasn’t an issue. The pedal is sturdy, and the bright blue LED indicator is a nice touch – it’s easy to see even in direct sunlight.

The Blackstar has great sustain and rich harmonics on top of the expansive tone shaping. It’s just as precise at full blast as it is at room volume, and the gain rolls off nicely with the guitar’s volume knob at all but the highest drive settings. It’s probably best-suited to hard rock and metal players, but anybody looking for a workhorse distortion with real versatility and attitude will really like this one.


Subdecay Studios, Inc.
Blackstar Distortion $159

Our expert has stated his case, now we want to hear yours. Log on to premierguitar. com, click on “Forum” and share your comments and ratings.

With a team of experts on hand, we look at six workhorse vintage amps you can still find for around $1,000 or less.

If you survey the gear that shows up on stages and studios for long enough, you’ll spot some patterns in the kinds of guitar amplification players are using. There’s the rotating cast of backline badasses that do the bulk of the work cranking it out every day and night—we’re all looking at you, ’65 Deluxe Reverb reissue.

Read MoreShow less

Amazon Prime Day is here (July 16-17). Whether you're a veteran player or just picking up your first guitar, these are some bargains you don't want to miss. Check out more deals here!

Read MoreShow less

A technicolor swirl of distortion, drive, boost, and ferocious fuzz.

Summons a wealth of engaging, and often unique, boost, drive, distortion, and fuzz tones that deviate from common templates. Interactive controls.

Finding just-right tones, while rewarding, might demand patience from less assured and experienced drive-pedal users. Tone control could be more nuanced.


Danelectro Nichols 1966


The Danelectro Nichols 1966, in spite of its simplicity, feels and sounds like a stompbox people will use in about a million different ways. Its creator, Steve Ridinger, who built the first version as an industrious Angeleno teen in 1966, modestly calls the China-made Nichols 1966 a cross between a fuzz and a distortion. And, at many settings, it is most certainly that.

Read MoreShow less

The author standing next to a Richardson gunstock lathe purchased from Gibson’s Kalamazoo factory. It was used to make six necks at a time at Gibson in the 1950s and 1960s.

Keep your head down and put in the work if you want to succeed in the gear-building business.

The accelerated commodification of musical instruments during the late 20th century conjures up visions of massive factories churning out violins, pianos, and, of course, fretted instruments. Even the venerable builders of the so-called “golden age” were not exactly the boutique luthier shops of our imagination.

Read MoreShow less