Since their debut, Before the Sun Goes Down, in 2014, Rob Ickes and Trey Hensley have made a name for themselves as some of the hottest country and bluegrass players in the business. As individuals, their credits range from Willie Nelson to Earl Scruggs to Merle Haggard—and as a duo, they’ve toured and recorded with artists including Tommy Emmanuel, Taj Mahal, Jorma Kaukonen & Hot Tuna, Luther Dickinson, and Molly Tuttle. It’s likely their forthcoming full-length release, Living in a Song, will only bolster their already impressive reputation.
Out on February 10th, Living in a Song is a new collection of two covers and 10 originals that were inspired by Ickes and Hensley’s life on the road. They collaborated with long-time producer Brent Maher (Merle Haggard, Willie Nelson) along with some award-winning songwriters to compose a total of 40 songs, which were then trimmed down to the resulting selection. That final cut of material leans into a classic country sound, with some Americana and bluegrass thrown in.
Along with the aforementioned credits, Ickes and Hensley have long been established, separately, as formidable musicians. Ickes has been International Bluegrass Music Association Dobro Player of the Year an incredible 15 times, and Hensley made his debut performance at the Grand Ole Opry at just 11 years old. In other words, the two have been around the block, and especially know their way around dobros and flattop acoustics.
Earlier this month, PG’s John Bohlinger met up with the duo at 3Sirens Studio in Nashville, where they played some mind-blowing music, and gave a rundown of some of their favorite guitars and gear.
Click here to pre-save Living in a Song which releases on Friday, Feb. 10.
Brought to you by D’Addario Humidipak.
Mind-Bending Bender
This dreadnought was built for Trey by the Oregon-based Preston Thompson Guitars in 2018. It’s the company’s D-MA model, with sinker mahogany back and sides and an Adirondack spruce top. But what truly makes the guitar special is its StringBender B-bender, which was built into the model by former Byrd and StringBender founder, Gene Parsons, himself. It’s also equipped with an LR Baggs Lyric. As for accessories, Trey uses D’Addario Nickel Bronze .013-.056 strings on all of his guitars, Blue Chip TAD60 picks, a Dunlop Blues Bottle slide, and a D’Addario Rich Robinson slide.
The Guts
Here's a tight shot of the inner mechanisms that engage the B-Bender.
Fighting Spirit
Trey’s favorite guitar is his 1954 Martin D-28. “I’ve had this one for about 20 years now,” he says, “I think I’m the third owner of it.” The first owner wore the neck down so that “it’s real skinny and gets super fat right at the fifth fret.” He brings his D-28 to most of his recording sessions, and while it also has an LR Baggs Lyric, “This guitar does not want to be plugged in at all,” he says, “It just fights back.” It has Brazilian rosewood back and sides; as for the top wood, “Anybody’s guess is as good as mine.”
Ugly Duckling
Found at Fanny’s House of Music in Nashville, this 1965 Harmony Sovereign Deluxe H1265 makes a bit of a statement with its prominent pickguard and mustache bridge. Or, as Trey puts it, “It’s possibly the ugliest guitar I’ve ever seen.” He calls the jumbo-bodied model his “Taj Mahal guitar,” as the bluesman requested it when Trey and Rob joined him for a few performances late last year. “I really like it,” Trey says, smiling, “It’s the guitar that shouldn’t be.”
No. 610
“This is probably one of my other favorites,” Trey says of his 2015 Wayne Henderson dreadnought—the guitar maker’s 610th build. Its specced to a Martin D-18, with mahogany back and sides. The Virginia builder famously built a few models for Eric Clapton, and notoriously has a very, very long wait list—which is why Trey was so afraid to put a pickup in it and take it out on the road after he got it. And then…. “The first night I took it out, it wasn’t on the strap button good, and it fell and hit the concrete floor. This piece here was split,” he says, gesturing to an area on the top plate. Thankfully, he was able to get it repaired. “It sounded really good before I dropped it, but it sounded about a million times better after I dropped it,” he says, “So, the moral of the story is: Drop your guitar.”
Before the War
Another D-18 copy, this 2017 Pre-War Guitars Co. model has mahogany back and sides, and is outfitted with an LR Baggs Anthem SL. It bears Taj Mahal’s signature on the front, and Trey’s on the back. The latter choice was Trey’s way of imitating Earl Scruggs, since he saw Scruggs had done the same to a couple of his instruments when he performed with him as a kid.
Black Dove
Next, a 2022 Gibson Elvis Dove, is “probably the only oddball acoustic I have,” says Trey. “I wasn’t planning on flatpicking on this thing, but I’ve already used it for some sessions.” Its maple back and sides make it the perfect choice to emulate the J-200 he borrowed from his producer for a country record he and Rob just finished recording.
Tried and True
Last in the acoustic queue is Trey’s 2021 Martin D-41. “This one’s been my main guitar for about a year now,” he says. It’s equipped with an LR Baggs Anthem SL, and has a bit of a lower setup compared to his other guitars—but with medium gauge strings, he says, it doesn’t buzz.
Loud and Clear
When Trey isn’t going DI through his LR Baggs Voiceprint, he runs his acoustics through his Fishman Loudbox Artist.
Go-To Gibson
Trey’s go-to electric is his Gibson Custom Shop 1958 Les Paul Reissue VOS, which he got in 2008. He keeps this guitar and his other electrics strung with D’Addario NYXL .010-.046 strings, which can be a bit jarring to his fretting hand when switching over from the .013s on his acoustics. “It takes a minute to not rip the neck off,” he says.
Byrd Build
This 2017 Parsons StringBender T-style was one of Gene Parsons’ early prototypes when he started building guitars.
Headshot For the Headstock
Here's Gene Parsons riding proudly on his 2017 T-style build for Trey Hensley.
To the T
The newest addition to Trey’s electric arsenal is this Berly Guitars Telecaster, built with Rocketfire ’60s-style pickups and “frets basically as big as my Les Paul.”
Trey Hensley’s Pedalboards (Acoustic)
Trey’s acoustic pedalboard is set up with a D’Addario tuner, an EHX Nano Q-Tron Envelope Filter, a Boss CE-2W Waza Craft Chorus, a Boss HM-2W Waza Craft Heavy Metal, a DigiTech Whammy Ricochet, an EarthQuaker Devices Ghost Echo Reverb, a Grace Design Alix preamp, and an LR Baggs Voiceprint. Power comes from a Voodoo Labs Pedal Power 2. It might be a bit unconventional for him to have two DIs, but he says he uses the Alix “for some EQ and mainly a boost; I’m bypassing it as a DI.” And, referring to the Voiceprint, he says, “If I can only take one pedal, it’s going to be that.”
Trey Hensley’s Pedalboards (Electric)
“I’ll preface it by saying, I don’t know what I’m doing,” admits Trey. On his electric pedalboard, he goes into his Dunlop Zakk Wylde Wah, then his D’Addario tuner—“You want that, after the wah,”—then into an EHX Micro Q-Tron, a Keeley Super Phat Mod, a Keeley Sweet Spot Johnny Hiland Super Drive, a JHS PackRat, an EHX J Mascis Ram’s Head Big Muff Pi, a Keeley Dark Side, and an MXR EVH Phase 90.
Ol’ Reliable
Trey has several amps for acoustic and electric. Today he was using a Fender ’68 Custom Princeton Reverb Reissue for his electric.
Bold and Byrly
“When you play a really good dobro, it’s in your face super fast,” says Rob Ickes, describing his main axe, a Byrl Guitars Rob Ickes Signature Series resonator—an instrument distinguished by its half-and-half ebony and curly maple fretboard. It’s equipped with a Fishman Nashville Reso Series pickup, which Ickes says is probably the first pickup that he’s used that’s nearly 100 percent faithful to the dobro sound. He uses D’Addario Nickel Bronze strings, Blue Chip thumb picks, and Bob Perry gold-plated fingerpicks, as well as a Scheerhorn bar slide.
Scheer Invention
This resonator guitar, made by Tim Scheerhorn, has Indian rosewood back and sides and a spruce top. According to Ickes, Scheerhorn “was kind of the Stradivarius of the dobro.” He was the first to start using solid woods—as opposed to the earlier use of plywood—and put sound posts inside the body, like those in a violin. “He also does a little baffle that helps force the sound out of the sound holes,” explains Ickes.
Maple Flames
The second Byrl resonator Ickes shared with us is made from flame maple, giving it that distinctive look, and is actually the first guitar he got from Byrl. He tunes it to an open G chord, which he recently discovered is the original Hawaiian tuning. It has a Beard Legend spun cone made of an aluminum alloy and named after Mike Auldridge.
One Man’s Trash
Ickes found this 1930s dobro at a music store owned by a friend outside of Franklin, Tennessee. It’s made with a stamped cone. “It’s a little bit garbage can, in a good way,” he says, “I’ll use it on sessions if I want a trashier sound.” He normally keeps it in a lower tuning, such as open D.
Family Heirloom
This 1927 Montgomery Ward guitar has a story as intriguing as its sound. It belonged to Ickes’ grandfather, who was a fiddle player: He discovered it one day in the attic of his family home. “This one spoke to me right out of the box,” he shares,” It had that funk—times 10.” It sports signatures from Taj Mahal and Merle Haggard, the latter of whom Ickes recorded a bluegrass album with back in 2006. “I take this to a lot of sessions, in case they need that funky kind of dirt-road sound,” he explains.
Let Slide
“This next one is a more modern version of that,” Ickes says of another model, a Wayne Henderson guitar which he says is the first slide guitar Henderson built. “I just said, ‘Do what you do, but raise the action a bit here at the nut.’” It has a Fishman Nashville Series Reso pickup which Ickes has go into a Fishman Aura Spectrum DI.
A Flash in the Pan
One of the most interesting guitars in Ickes’ collection is his 1932 Rickenbacker Frying Pan, an electric lap steel that was one of the first ever of its kind to be created. “It just cracks me up how they nailed it right out of the box,” he comments. Its single knob is a combination of tone and volume—“As you move to the right, it gets brighter and louder. As you move to the left it gets quieter.”
Silver Surfer
As you can tell, several of the guitars that Ickes brought on this Rig Rundown are from the 1930s, including this Rickenbacker lap steel, nicknamed the “Silver Surfer.” Its mirror-like fretboard made it difficult for Ickes to see the frets when playing live, so he had them covered in red tape, which make them stand out much better.
Black and White
The last of Ickes’ guitars is another 1930s Rickenbacker lap steel, which he fondly refers to as the “Panda,” due to its black-and-white decor. He loves how it sounds, but admits, “This is great if you don’t leave the house [with it],” as it’s very heavy and doesn’t really stay in tune.
Dulcet Dairy Tones
Despite how Ickes typically favors vintage amps, he’s fond of this newer 20-watt Milkman Creamer, which he bought with a lap steel from a friend in California after hearing the two in combination. It has all the vintage vibe without the hassle of old amps.
Li’l Champ
Another amp in Ickes’ collection is his ’50s Fender Champ.
Small Yet Mighty
A third amp that Ickes shared with us is a vintage 1930s Rickenbacker.
Rob Ickes’ Pedalboards (Dobro)
Ickes has two separate pedal boards for his dobro and for his lap steel. Both boards are powered with separate Truetone 1 Spots. He keeps things simple on his dobro board, which includes a Fishman Aura Spectrum DI, an MXR Eddie Van Halen Phase 90, a Walrus Audio Mako Series R1 Reverb, and a ’80s era Boss DM-2 Delay.
Rob Ickes' Lap Steel Pedalboard
The simple setup trend continues with his lap steel pedalboard, which is made up of another four pedals: an EXH Micro Q-Tron, a Keeley Super Phat Mod, an MXR Phase 90, and a Keeley Omni Reverb.
The Aristocrats’ Bryan Beller
Photo by Manuela HäuBler
Starting at top right, Bryan Beller’s board has a pair of Xotic EP Boosters to bring up the output of his two passive instruments to match his Lull bass. Next comes a Demeter COMP-1 Opto Compulator that’s always on, followed by a TC Electronic Hall of Fame Reverb, Boss CE-2B Bass Chorus, Boss DD-3 Digital Delay, and a TC Electronic Flashback Delay/Looper. Moving to the bottom left, there’s a Boss OC-2 Octave and an Xotic Bass BB Preamp (Beller’s main overdrive). The Darkglass Electronics Vintage Microtubes and MXR M109S Six Band EQ are used for a beefier, RAT-like sound. Then there’s an EHX Micro POG set to an octave up and an old DigiTech X-Series Bass Driver that pushes the BB Preamp and runs into the Dunlop 105Q Cry Baby Bass Wah pedal (white), giving vocal-like sweeps more definition. Beller also has a Dunlop DVP3 Volume (X) Volume and Expression pedal and a Boss TU-2 Chromatic Tuner. Beller has incorporated the Behringer FCB1010 MIDI controller into his rig so he can provide some “low-rent Geddy Lee” moments in the set via a Roland JV-1010 64-Voice Synth Module.
Beller has incorporated the Behringer FCB1010 MIDI controller into his rig so he can provide some “low-rent Geddy Lee” moments in the set via a Roland JV-1010 64-Voice Synth Module.
Using the Raven Labs MDB-1 Mixer/Direct Box/Buffer for his pedals and running the Roland JV-1010 into his amps allows Beller to employ both his bass and the synth module at the same time.
Rig Rundown: The Aristocrats' Guthrie Govan & Bryan Beller [2022]
Nitty Gritty Dirt Band’s Jeff and Jaime Hanna
Jeff Hanna
Jeff Hanna, who co-founded the Nitty Gritty Dirt Band in 1966, runs his acoustic guitars through a Fishman Aura Spectrum DI and a Boss TU-3 Chromatic Tuner. The electric side of his board includes another Boss TU-3, a Paul Cochrane Tim V3 Overdrive, a Keeley Katana Clean Boost, a J. Rockett GTO, a Keeley-modded Boss TR-2 Tremolo, and a Keeley Mag Echo.
Jaime Hanna
His son Jaime combines acoustic and electric pedals on one board. The acoustic side features a Fishman Aura Spectrum DI, Boss TU-3 Chromatic Tuner, and a Radial JDI direct box as a back-up. For electric, there’s an Ernie Ball volume pedal that feeds a TC Electronic tuner. The main out hits a Mesa/Boogie Stowaway Class-A Input Buffer, a Keeley Compressor, a Paul Cochrane Tim Overdrive, a J. Rockett Archer, an MXR Super Badass Distortion, a Boss GE-7 Equalizer modded by Nashville’s XTS, and a Line 6 M9 Stompbox Modeler Multi-Effects pedal. A Truetone 1 SPOT PRO CS12 provides the juice.
Rig Rundown: The Nitty Gritty Dirt Band’s Jeff and Jaime Hanna
Tetrarch’s Diamond Rowe
Photo by Amy Harris
Shredder Diamond Rowe keeps things succinct. Her stage setup features an always-on Ibanez TS9 Tube Screamer and a DigiTech Whammy for pure fun and note obliterating. A pair of utilitarian Boss stomps—an NS-2 Noise Suppressor and TU-3 Chromatic Tuner—keep her strings clean and accurate. There’s also a Voodoo Lab Pedal Power ISO-5 and Ground Control Pro MIDI Foot Controller.
In a separate rack, Rowe hides her “freak tone” patch. There lurks a Boss RV-6 Reverb, Boss DD-7 Digital Delay, Boss CE-5 Chorus Ensemble, and a MXR Uni-Vibe Chorus/Vibrato, plus a pair of tucked-away MXR Carbon Copy Analog Delays. The rack toys are fired by a Voodoo Lab Pedal Power 2 Plus.
Rig Rundown: Tetrarch's Diamond Rowe & Josh Fore
Marcus King
Roots powerhouse MarcusKing runs his guitar’s cable into a Dunlop Volume (X) 8. Then his signal hits a Dunlop Cry Baby Wah, an MXR Booster, an Ibanez TS9 Tube Screamer, a Tru-Fi Two Face Fuzz, MXR Micro Chorus, Dunlop Rotovibe Chorus/Vibrato, MXR Phase 100, Tru-Fi Ultra Tremolo, Dunlop Echoplex Delay, MXR Reverb, and a Radial Shotgun signal splitter and buffer. Juice? That’s via a Voodoo Lab Pedal Power 3 Plus.
Marcus King's Pedalboard
Foo Fighters’ Chris Shiflett
The mega-rockers’ Chris Shiflett starts his pedalboard with an EHX Micro POG, followed by a JHS Muffuletta, an MXR Flanger and EVH Phase 90, an EHX Holy Grail reverb, a Strymon Deco, and a Klon KTR. The next row sports a Boss CE-2W Waza Craft Chorus, a couple of Strymon TimeLines (one for each amp), and down below is a trio of Xotics—an EP Booster, SP Compressor, and an XW-1 Wah. Utilitarian boxes include a Lehle Little Dual II Amp Switcher, a Palmer PLI-05 Line Isolation Box, a Boss FS-5L Foot Switch (to toggle between clean and dirty on his Friedman Brown Eye), and a TC Electronic PolyTune.
Chris Shiflett's Pedalboard
Mammoth WVH's Wolf Van Halen
Wolf Van Halen brought every EVH pedal (aside from the 5150 Overdrive) for his band’s 2022 tour. The Dunlop EVH95 Cry Baby Wah gets a workout for the solo of “You’ll Be the One.” The MXR EVH 5150 Chorus and the MXR EVH Phase 90 have become interchangeable for him. The MXR EVH117 Flanger gets sprinkled in, and for the solo on “Distance,” he always uses the Boss DD-3 Digital Delay and the EarthQuaker Devices Afterneath. An acoustic DI and tuner consume the rest of the real estate.
Wolf Van Halen's Pedalboard
Full Rig Rundown: https://bit.ly/MammothWVHRRSubscribe to PG's Channel: https://bit.ly/SubscribePGYouTubeMammoth WVH's leader details and demos the series of ...Mammoth WVH’s Ronnie Ficarro
Ronnie Ficarro
Ronnie Ficarro’s bass stomp station hosts a trio of EVH-inspired pedals: an MXR EVH 5150 Chorus, a MXR EVH 5150 Overdrive, and the MXR EVH Phase 90—plus an EHX Pitch Fork for approximating the low B roar that Wolf recorded on the song “Epiphany.” The nondescript silver box is a channel switcher for his Fender Super Bassman, and a Peterson StroboStomp HD does the tuning.
Rig Rundown: Mammoth WVH
El Ten Eleven’s Kristian Dunn
As half of this bass and drums duo, Kristian Dunn used to use three pedalboards, crouching down and manipulating settings all night. Today, he depends primarily on a Line 6 M9 Stompbox Modeler, although it’s two Boomerang III Phrase Samplers that make an El Ten Eleven show happen. In line, they’re separated by the DigiTech Bass Whammy. Dunn routes his signal this way so he can use the Whammy to shift octaves or keys on entire loops in Phrase Sampler one. The second Phrase Sampler, after the Whammy, allows him to pitch-shift specific loops without impacting the whole song or other loops. The Strymon TimeLine conjures precise repeats and specific delay settings not in the M9. The EHX Superego Synth Engine is a secret weapon, for reverse-sound passages. When he holds down the freeze function and plays the next note, it’s not audible until he releases the switch, and then the ongoing audible note blends into the second note. Cool, right? The remaining two pedals are a Nu-X NFB-2 Lacerate FET Boost and a Marshall GV-2 Guv’nor Plus. His tuner: a Boss TU-3 Chromatic. A Custom Audio Electronics RS-T MIDI Foot Controller makes Dunn’s scene changes easier, talking with the M9 and Strymon to alleviate some tap dancing.
Rig Rundown: El Ten Eleven's Kristian Dunn
Shinedown’s Zach Myers
For the Shinedown guitarist, everything starts at the Fractal Audio Axe-Fx IIIs—a main and a backup. There are four channels of Shure UR4D+ wireless units (three for electric and one for acoustic). An AES digital out runs to an Antelope Audio Trinity Master Clock and Antelope Audio 10MX Rubidium Atomic Clock. This helps fatten the fully stereo, digital rig by converting it to analog. After that, IRs off the Axe-Fx (left and right) channel into a pair of Neve DIs that then feed a Fryette G-2502-S Two/Fifty/Two Stereo Power Amplifier. (There’s another for backup.) And finally, parallel signals go to two ISO cabs and two Universal Audio OX Amp Top Box reactive load boxes. Altogether, there are eight channels of guitar.
While tech Drew Foppe handles the racks, Zach still has some control at his toes via a Dunlop MC404 CAE Wah, DigiTech Whammy 5, Ernie Ball 40th Anniversary Volume Pedal, and the Fractal Audio FC-6 Foot Controller. A Voodoo Lab Pedal Power 2 Plus gives life to these pedals.
Rig Rundown: Shinedown's Zach Myers & Eric Bass [2022]
Shinedown's Eric Bass
Eric Bass’ Prestige basses hit the Shure UR4D+ wireless units (similar to Myers, he has three channels for electric and a channel for acoustic), then a Neve DI, and then a Radial JX44 signal manager that feeds into an Ampeg SVT-7 Pro for clean tone (with an extra for backup).
His onstage pedalboard includes a Dunlop 105Q Cry Baby Bass Wah, a DigiTech Bass Whammy, and an MXR M299 Carbon Copy Mini Analog Delay. The ‘Gas’ switch engages a Mojotone Deacon, and a Radial SGI-44 1-channel Studio Guitar Interface connects with his rackmount JX44, while a Boss TU-3W Waza Craft Chromatic Tuner and Voodoo Lab Pedal Power 2 Plus complete the lineup.
Hannah Wicklund
Photo by John VandeMergel
Blueser Hannah Wicklund’s pedalboard is stacked for bruising. Once the signal gets past her MXR Talk Box and Dunlop JC95 Jerry Cantrell Signature Cry Baby, it hits the channel switch for her Orange head. That stays in overdrive mode for about 75 percent of her set, which she says gives her sound its grizzly-bear lows. Next up is a classic—a Boss BD-2 Blues Driver. But this one has a Keeley mod that opens up the low end and keeps mids and highs better defined. The BD-2 gets some atmospheric help via a Dunlop EP103 Echoplex Delay, and the J. Rockett Archer also pairs with the BD-2. There’s an MXR Micro Flanger and an EHX Nano POG, a T. Rex Room-Mate Tube Reverb (on a hall setting), and a Peterson StroboStomp HD, plus an MXR Carbon Copy and a Keeley Rotten Apple OpAmp Fuzz.
Rig Rundown: Hannah Wicklund
Code Orange’s Reba Meyers
Reba Meyers’ tone starts with her signature ESP LTD RM-600 guitar and her 5150 head, but from there her sound is processed via a Fractal Audio Axe-Fx III run through the effects loop of her amp and used to coordinate channel switching. Meyers notes that for some songs she uses it only as a gate, while for others she adds in precise modulation, delay, reverbs, and “noise.” The rest of the rack features a Two-Notes Torpedo Captor X that she uses for cab sims and sending a pure, direct signal to FOH so they can mix that with the SM57 mic on the 4x12s. A Shure GLXD4 Wireless unit keeps her untethered and a RJM Mini Amp Gizmo uses MIDI to switch the amp via the Axe-Fx III.
Her actual board has two always-on pedals: the ISP Decimator II Noise Reduction and the Ibanez TS9 Tube Screamer. They’re joined by a Moog MF Ring Mod, a Boss PS-6 Harmonist, an AMT Electronics WH-1 Japanese Girl Optical Wah, and an Universal Audio Astra Modulation Machine. Everything is controlled by the RJM Mastermind PBC/10.
Reba Meyers' Pedalboard [Code Orange]
Joe Bonamassa
For his 2022 tour, Joe Bonamassa kept his pedalboard stocked with a Way Huge Smalls Overrated Special Overdrive, a Tone Mechanics/Racksystems Loop Box, a Tone Mechanics/Racksystems Splitter, a Fulltone Supa-Trem, a Hughes & Kettner Rotosphere, a Boss DD-2 Digital Delay, an MXR Micro Flanger, an Ibanez TS808 Tube Screamer, an EHX Micro POG, a Dunlop Joe Bonamassa Fuzz Face, a Lehle A/B/C Switcher, a Dunlop Joe Bonamassa Signature Cry Baby Wah in Pelham blue, and an on/off/fast/slow dual switch for his Mesa/Boogie Revolver rotating speaker cabinet. Juice came from a Voodoo Lab Pedal Power 2 Plus.
Joe Bonamassa's "Boomer" Pedalboard
Exodus’ Gary Holt
Thrash-metallurgist Gary Holt trusts most of his switching to his tech, Steve Brogdon, who triggers everything with a rack-mounted Voodoo Lab GCX Guitar Audio Switcher that coordinates with a Voodoo Lab Ground Control Pro MIDI Foot Controller. The pedals in Brogdon’s care include a Boss SD-1 Super Overdrive, Pro Tone Pedals Gary Holt Signature Mid Boost, Maxon OD-9, MXR Bass Octave Deluxe, Maxon FL-9 Flanger, TC Electronic Corona Chorus, Boss NS-2 Noise Suppressor, and a Darta Effects Bonded by Delay. A BBE Supa-Charger provides juice.
Holt still stomps these boxes himself: a Does It Doom Doomsaw, Mooer Tender Octaver, Mooer Green Mile, and a Dunlop JC95SE Jerry Cantrell Special Edition Crybaby Wah. A Shure GLXD16 Digital Wireless Guitar Pedal System lets him rock untethered.
Rig Rundown: Exodus' Gary Holt [2022]
Dinosaur Jr.’s J Mascis
For at least 10-plus years, J Mascis has used a Bob Bradshaw-built Custom Audio Electronics switcher as his mission control. His longtime stomps include a Tone Bender MkI/Rangemaster-clone combo pedal made by Built to Spill’s Jim Roth (bottom right corner), Mascis’ first EHX Ram’s Head Big Muff Pi (top right), a vintage EHX Deluxe Electric Mistress, an MC-FX clone of a Univox Super Fuzz (lower right, blue box), a pair of ZVEX pedals—a Double Rock (two Box of Rock stomps in one) and a Lo-Fi Loop Junky (both bottom left), a Tube Works Real Tube Overdrive, a Moog Minifooger MF Delay, and a Boss TU-3S Tuner. His recently added pedals are a Homebrew Electronics Germania 44 Treble Booster (lower right), a JAM Pedals RetroVibe MkII, an Xotic SL Drive, a Suhr Jack Rabbit Tremolo, a Dr. Scientist Frazz Dazzler fuzz, an EHX Oceans 11, and a Dunlop Jimi Hendrix ’69 Psych Series Uni-Vibe Chorus/Vibrato. Everything receives juice from an MXR MC403 Power System or an MXR M237 DC Brick.