The Meris MercuryX is the first pedal I’ve ever played that has its own glossary, found near the back of its 32-page user manual. Advertised as “a Modular Reverb System with pro audio and studio rack heritage,” the USA-made MercuryX builds on the foundation of Meris’ Mercury7 reverb unit, which was inspired, in part, by the Lexicon 224 Greek musician Vangelis used to score for Blade Runner. The Mercury7 is a richly featured and widely celebrated effect. But by comparison, the MercuryX makes it look like an abacus.
The MercuryX’s price bracket is about as high as it gets for a non-vintage effects pedal, but spend an hour with it, and you’ll realize the staggering amount of work the Meris team must have poured into it. It’s a feat of audio engineering and imagination that can take you anywhere you want to go.
Guide to the Galaxy
Though it features an almost comical amount of adjustability, the MercuryX is hardly a bother to operate in Meris’ default graphic view on the digital display. (The text view, comparatively, felt labyrinthine, if not flat-out impossible to navigate.) Three of the pedal’s seven knobs help you navigate the edit pages, where you can adjust a suite of parameters that, like the haunting reverb algorithms, feel like they never end. The 99 preset slots are divided into banks of three, which are selected and cycled via different combinations of the four footswitches. A favorites bank lets you keep your top three presets in immediate grasp. Plus, simultaneously pressing the two switches on the right will call up a tuner on the display. The MercuryX is powered by an ARM processor which helps enable its breadth of modulation options, including tremolo, chorus, vibrato, pitch shift, tape emulation, and more. Then there’s discrete filtering, compression, and preamp gain. Each of these functions is, of course, deeply tweakable, down to independent high- and low-frequency controls. The glossy deep-blue box is equipped with mono and stereo outs, expression pedal in, MIDI jacks, and USB-C for firmware updates. It’s sleek, but more importantly, it feels like resilient armor for the complex guts contained within.
Reverb of the Nerds
It’s clear that the builders at Meris are ginormous reverb nerds. The MercuryX contains eight distinct reverb algorithms. A few are ported from the Mercury7, while others are brand new. There’s every sort of reverb sound imaginable, and they’re all magnificent. You can dial in a tight, humble spring reverb, then jump to a pitch-shifting, interdimensional wormhole or a steely, dystopian fog.
And though they invite customization, the 87 Meris-made presets are each instantly cinematic and usable. The depth of these reverbs can be difficult to convey: Somehow, every single one is imaginative and stirring, suggesting different tones, voicings, picking styles, and progressions. (I could only imagine how they’d sound with a synth, bass, or vocal.) Plus, every setting in the presets can be individually tinkered with and saved, so there’s really a mind-numbing amount of flexibility here.
But that flexibility triggers some option paralysis, too. I found myself sticking to the MercuryX’s pre-programmed settings rather than trying to build my own for two reasons. There were simply too many variables to modify, and the reverb aficionados at Meris know what they’re doing. Why overcomplicate things?
The MercuryX’s only flaw might be that it occupies an awkward in-between spot in the market. Its capabilities (and price tag) eclipse many of the higher-end reverb units available, and in practice, it often feels closer to a compact floor modeler than an effect pedal. But it is just an effect pedal. Though, maybe this is a sign of things to come: The MercuryX really does lend the feeling that, at least as far as reverb is concerned, it can do everything.
The Verdict
For the right user, the MercuryX’s complexity will be a major asset. Learn how to manipulate all the processing power included here and this pedal might be a game-changer.
“Gear is meant to be destroyed in the line of duty,” laughs Ruban Nielson. “I realize I prefer to see my equipment all dinged up rather than sitting perfect in my basement—that’s a dorky thing to do.”
That doesn’t mean Nielson doesn’t care about his sound. He noted in a 2015 interview with PG that he spends countless hours in his basement tinkering on breadboard circuits and swapping out components, trying to maximize a pedal for his needs. “I like the idea that instead of buying your sound, you’re building your sound,” he said.
Over the course of 14 years, five albums, and thousands of touring miles, Nielsen has been custom-fabricating his guitar voice. But as we all know, the quest is never-ending, like trying to catch the horizon. After all, isn’t it the journey, not the destination, that matters?
“I used to be too much of a savage to care about a clean boost or headroom,” says Nielson. “‘Just give me a distortion pedal already!’ But now I’m exploring the intricacies, subtleties, and nuances of guitar.”
Ahead of Unknown Mortal Orchestra’s headlining performance at Nashville’s Brooklyn Bowl, Ruban Nielson welcomed PG’s Chris Kies onstage to explore his current sonic lab. Nielson covers his two space-age guitars (and what inspired them), explains how he convinced Benson to put a Monarch inside a vintage solid-state Yamaha, and details the pedals—including a few of his own designs—that extract a kaleidoscope of moods.Brought to you by D'Addario.
Challenge Accepted: The B3-R
Since forming Unknown Mortal Orchestra in 2009, the instrument that Ruban Nielson has been linked to and inspired by is the Fender Jag-Stang. This short-scale offset was codesigned by Kurt Cobain in the early ’90s by simply taking photos of Fender’s Mustang and Jaguar, splitting them in half and pasting them together. The Jag-Stang was treated to separate production runs in the late ’90s and early 2000s before a wider release in 2021. Nielson’s friend gifted him a cherry-red model, shaping Unknown Mortal Orchestra’s first decade of music.
In 2015, Nielson told PG about its impact on his playing style and creative outlook: “When I started on the UMO stuff I pulled it out. It would never stay in tune and sounded really strange, but when I plugged it into a Blues Junior, I started to come up with completely different ideas. I tuned it a half-step down and started playing with my fingers. It was just a whole new style that emerged in the space of about two weeks after messing with this guitar. It’s a kind of imperfect creature and that’s what I like about it.”
Fast forward to a few years ago when Ruban met luthier Mike Baranik. Baranik was a longtime fan of UMO and knew of Nielson’s allegiance to the Jag-Stang, so he approached Nielson with a proposition: “I can make a guitar that will do everything that the Jag-Stang does better and more.” Nielson was intrigued, so the build began. They conversed and collaborated over several phone calls and text chains that culminated in Nielson realizing Baranik was “some kind of genius through his simple innovations that suited the way I think about music and guitar.”
The flaws of the Jag-Stang that informed Nielson’s playing style became features on the above Baranik B3-R. The biggest thing that Ruban wanted translated from the Jag-Stang to the Baranik was the slinky neck pocket that allowed for him to push the neck for emotive bends à la Bill Frisell.
Nielson explains: “When I tuned the Jag-Stang a half-step down—which I just did because Jimi Hendrix did it, and I thought if I was going to start writing some new music that this was my chance to start messing with that—that loosened the strings up. The neck was a smaller scale so it gave me the ability to do completely different things. I was able to get around the neck a lot easier.”
To make that body-neck connection even more expressive and manipulatable, Baranik constructed the trademarked Baraneck floating neck that fastens two springs to the neck joint allowing Nielson to tighten or loosen the neck as wanted. Nielson also routed out wood behind the pickups on his Jag-Stang to reduce the weight and keep it light as possible—just five pounds, nine ounces. The B3-R has a basswood body, koa neck, and ebony fretboard.
Another thing Nielson requested was an approximation of the sound of pickups found in vintage Japanese lawsuit-era instruments, which were often unique, unpotted, and unpredictable. Baranik worked his magic and, via his own alchemy, produced these potted single-coils. Other tag-team easter eggs include a custom Hawaiian print pickguard, an upcycled circuit board control panel, and custom inlays—a row of shark teeth, filled with crushed bone dust—that are a tribute to the family symbol.
All of UMO’s material is based on half-step-down tuning both of his electrics take Ernie Ball Super Slinkys (.009-.042). Nielson goes with a Shure Axient wireless pack at both his Sitar and Baranik guitars and to keep things quiet and tidy, his tech Ben Gram inserted an Electro-Harmonix Hum Eliminator and a Radial Dragster Load Correction box.
Psy-tar
Two of the songs on UMO’s fall setlist required a sitar. Nielson previously toured and recorded with a Rogue Sitar, but found it to be a nuisance to maintain on the road. He searched for a sturdier stand in and found this electric sitar star: a Jerry Jones model whose voice wholly celebrates Nielson’s love for early psych-rock, and matches its chime with rugged dependability.
Nate the Great
Nielson has plugged into all sorts of amps since 2009 when playing under UMO. The longest sidekicks include Fender combos and Orange heads. (When Ruban spoke with PG in 2015, he had a Fender Hot Rod DeVille and an Orange AD 30 head.) He notes in the Rundown that a few years back, he was “getting frustrated with his amp setup and thought he should be like one of those real guitar guys and find a boutique amp company.” After auditioning some combos, he landed on a Benson. One half of Ruban’s stereo setup is the Benson Nathan Junior that maxes out at 5W, has a single JJ 6V6 power tube, and barks with a 10" Celestion Greenback.
Benson in Yamaha's Clothing
Nielson has his feet firmly planted in both amp camps. He appreciates the beef, brawn, and chime only produced by power tubes, but he’s also attracted to the old solid-state amps that offer quirky, charmingly weird tones. Chris Benson’s shop happened to be within walking distance of Nielson’s home, so after becoming acquainted and friendly, Nielson pitched a project for Benson: Could he turn a ’70s solid-state Yamaha TA-20 into a roadworthy tube amp? Benson initially balked at the idea, and Nielson thought his plan was foiled. Three years later, Benson reached out and asked if Nielson still had the Yamaha—he did—so Benson told him to bring it by the shop, and they’d retrofit a Benson circuit into the TA-20. “My weird dream to bring this on tour was finally happening!” says Nielson.
The TA-20 is packed with Benson’s Vinny Reverb guts that includes a JJ EL84 power tube, a 12AX7 preamp tube, a 12DW7, and a JJ 6V6 power tube as a voltage regulator that goes from .25W up to a snarky six watts. The overhauled TA-20 does still have the original polystyrene parallelogram speaker. Both amps are always on, and miked up with Shure SM7Bs.
Ruban Nielson's Pedalboard
Nielson is a tonal tactician. He’s never been satisfied with stock sounds and a pedal’s inherent limitations. “If I find a pedal I like, I use it for a long time and then I try to build a clone to see if I can improve on it,” he explains. “I sit around in my basement tweaking it plugged in—on the breadboard—and changing out different components and adjusting the trim until I get everything just exactly how I want it.” So, looking down at his stomp selection you’ll notice a few nondescript devices on the beautiful Twin Peaks Woodworks pedalboard custom-built by both Nielson’s tech Ben Gram and Caspian guitarist Jonny Ashburn.
His signal hits an Effectrode PC-2A Tube Compressor (you’ll notice two on the board—one is a backup). That’s a change from our 2015 interview, when he he was using an Analog Man Bi-CompROSSor and had it at the end of his chain. (“It’s nice to have a compressor at the end of everything—especially with a phaser pedal, which has frequency spikes,” he said at the time. “It’s nice to control them.”) He enjoys how the PC-2A up front fattens his entire sound, and how it smooths and shaves off the transient tinges. The Strymon Deco has a stereo out that hits a pair of Jam RetroVibes. Both are set to have slightly different speeds and depths so that they really take that stereo signal for a journey in real time, and Dave at FOH has them panned in the PA to really amplify this effect.
One of Nielson’s creations shows up inside the gray box titled “Octave Magic,” which is based on the Foxx Tone Machine. The suede purple devil next to it is the Jam Pedals Fuzz Phrase LTD, about which Nielson says, “It’s the wooliest, most-musical Fuzz Face I’ve ever played.” Sometimes the answer to Nielson’s problems is the Benson Germanium Boost. “If something’s wrong,” he explains, “I’ll kick on that pedal and it makes everything louder and resets the gain structure.” The Gamechanger Audio Plus pedal sees a lot of action throughout the set: it helps Nielson seam the tail end of a solo and discreetly rejoin the band in rhythm mode.
The remaining pedals include a Boss DD-3 Digital Delay (a gift from Mike Baranik), a Danelectro Back Talk reverse delay, an Electro-Harmonix Holy Grail reverb, and in the top-left corner, an unnamed pedal that Nielson built that is currently not in the signal. (He can’t remember if it’s a Rat or Tube Screamer clone.) Utility boxes include a Boss TU-3 Chromatic Tuner, an Electro-Harmonix Switchblade Plus channel selector, and a Lehle Little Dual II switcher.
Shop Ruban Nielson's Rig
Benson Monarch
Shure SM7B
Strymon Deco
Benson Germanium Boost
Boss DD-3 Digital Delay
Danelectro Back Talk Reverse Delay
Electro-Harmonix Holy Grail Reverb
Boss TU-3 Chromatic Tuner
Electro-Harmonix Switchblade Plus Channel Selector
Lehle Little Dual II ABY Switcher
Ernie Ball Super Slinky Strings
Alec Palmer: Brand Loyalist
I use my board to practice and record from home, and I love jamming with a couple of my musician buddies every so often. I’d say my favorite pedals are the EarthQuaker Devices Plumes and the Big Ear Albie. I can get a ton of different effects out of the Albie, and the Plumes is the best overdrive I’ve ever played. I’m a bit of a brand loyalist. When I find a pedal I love, I tend to go back and buy more pedals from that specific company. Lately, that company has been Mythos Pedals!
Signal chain: Mythos Pedals Golden Fleece (Au79 Mass Street Music exclusive), Ibanez BigMini Tuner, Boss OC-5 Octave, EarthQuaker Devices Spatial Delivery, Mythos Pedals Positron Collider Fuzz, Mythos Pedals Wildwood Vipera, Onkel Amplification Stratoblaster, Ryra Klone, EarthQuaker Devices Plumes, Big Ear Pedals Albie (2), Mythos Pedals Oracle Analog Echo, and a TC Electronic Ditto Looper.
Brad Konick: Is It Humble, Though?
Here’s my humble pedalboard submission for your consideration. Each pedal is listed in order of the signal chain. I’m also including a photo of the electric guitar I use, which I made a few years ago. It’s a handbuilt custom solidbody, black walnut T-style electric guitar, with handcarved bas-relief and handmade steel inlay. Pickups are a Seymour Duncan Hot Rodded humbucker set: Jazz (neck) and JB (bridge). The guitar plugs first into the Boss volume pedal listed below.
Pedals - Signal Chain:
- Boss FV-30H Volume Pedal >
- Korg Pitchblack Mini Tuner >
- Kokko Mini Compressor >
- Electro-Harmonix Synth9>
- EarthQuaker Devices Arpanoid V2 Polyphonic Pitch Arpeggiator >
- DOD Carcosa Fuzz >
- Boss BD-2 Blues Driver>
- Death by Audio Echo Dream 2 Advanced Echo Modulation >
- TC Electronic T2 Reverb >
- Pedal Projects Undertow Tremolo >
- EarthQuaker Devices Organizer Polyphonic Organ Emulator >
- MXR Phase 95 >
- MXR Six Band EQ >
- EarthQuaker Devices Aqueduct >
- Electro-Harmonix Canyon Delay/Looper >
- Walrus Audio Slö Multi Texture Reverb >
- Roland JC-22 Jazz Chorus (amp)
Power and Cables:
- MXR M239 Mini Iso-Brick Power Supply
- Donner DP-2 Power Supply
- Snark 9-volt power adapters
- 1/4” Audioblast pancake patch cables (6", 8", 3')
- Fender tweed 1/4” TS 15' instrument cable
I’m also including a photo of the electric guitar I use, which I made a few years ago. It’s a handbuilt custom solidbody, black walnut T-style electric guitar, with handcarved bas-relief and handmade steel inlay. Pickups are a Seymour Duncan Hot Rodded humbucker set: Jazz (neck) and JB (bridge).
Chris Gibbs: Load In, Load Out
This is the pedalboard I use for gigs with my band, Triple Engine, in York, Western Australia. The board is actually the lid of a Craftright tool/accessory case.
When the gig is finished, I can pack leads, extra pedals, power supplies, and more into the case, flip the board so that it becomes a lid again, re-insert the removable hinge pins, and load out!
Here’s how it flows: DigiTech HardWire HT-6 Polyphonic Tuner > Outlaw Effects Hangman Overdrive > MXR Phase 90 >Vox Satchurator Distortion > Outlaw Effects Vigilante Chorus > Tech 21 Fly Rig 5 > Outlaw Effects Boilermaker Boost.Clint Roth: Vision Board
Hey PG,
Here’s my current small board I’m using for writing with my band, Big Jaw. I plug into a TC PolyTune 2 Noir that feeds a Loop-Master A/B Box. The “A” loop is my JHS Charlie Brown overdrive, and the “B” loop is my fuzz, which is an old EarthQuaker Devices Hoof fed by a TC Electronic Sub ’N’ Up Octaver. I usually use the octave and fuzz together so it’s helpful to have them on a loop like that so I can switch to both with one click. The output of the Loop-Master feeds my TC Electronic Flashback Delay, which is usually just giving me a little slapback. Thanks!
David Reaume: Bass and Bow
Here’s my bass board! I use it mostly for ambient music to create textures, but it covers a lot of territory as you can see. I use a cello bow frequently. Paired with the octave and additional reverb, it really makes for a convincing string section.
Signal Chain:
- TC Electronic PolyTune 3 >
- Boss OC-5 >
- Chase Bliss Audio Automatone Preamp MKII >
- Gamechanger Audio Plasma Pedal >
- Dunlop DVP4 Volume (X) Mini >
- Boss DC-2W Dimension C (split in stereo for the rest of the chain) >
- Strymon El Capistan dTape Echo >
- Strymon Flint Tremolo & Reverb >
- Neunaber Audio Immerse Reverberator MKII
All powered by a Strymon Zuma power supply on a custom board (made by yours truly) with custom-length Mogami patch cables. The Analog Endeavors Dual Favorite switch is for the Strymon pedals.
DeMatt Harkins: The Dishwasher
My name is DeMatt Harkins and I live in Jackson, Mississippi. I made my pedalboard out of a wooden dish rack from Target.
Signal Path:
- Guitar ->
- Boss TU-2 Chromatic Tuner ->
- Catalinbread SFT Overdrive ->
- TC Electronic Vortex Mini Flanger ->
- JHS 3 Series Chorus ->
- MXR Phase 95 ->
- Danelectro BLT Slap Echo ->
- Strymon Flint Tremolo & Reverb ->
- EarthQuaker Devices Dispatch Master
Thanks very much!
Jack Thompson: The Alan Parsons Project
I’m a musician based out of the Twin Cities, Minnesota, and I saw that you were taking pedalboard submissions! So, here’s mine. I’ve been refining and building this in a variety of ways the last seven years. I hope you enjoy and get a laugh.
High Level Overview:
The board consists of two loops (two different boards) controlled via EarthQuaker Devices Swiss Things. This sends the signal to a Mesa/Boogie Mini Rectifier 25 and Fender Hot Rod Deluxe III. The left board is pre-loop, and loop 1 (distortion based) with Dr. Evil in a moonsuit holding Austin Powers’ mojo. The right board is loop 2 (modulation based) with Dr. Evil holding Mr. Bigglesworth. My guitar cable is an orange Divine Noise Curly Cable, purchased from Chicago Music Exchange.
Pedalboard 1 (left):
- Pre-loop section:
- Guitar goes straight into an Emma Electronic Okto Nøjs.
- Then to a Pigtronix Philosopher’s Tone Germanium Gold Micro (this is an “always on” pedal).
- Next is the Dunlop Dimebag Cry Baby from Hell Wah.
- And then finally a MXR Uni-Vibe set at minimal settings (this is typically an “always on” pedal).
Loop 1 (via EarthQuaker Swiss Things):
- Behringer SF300 Super Fuzz
- Horizon Devices Apex Preamp
- Electronic Audio Experiments Model feT
- Boss DD-7 Digital Delay
- EarthQuaker Devices Afterneath V2
Pedalboard 2 (right):
Loop 2 (via EQD Swiss Things):
- JHS Bonsai (minimal drive settings, “always on”)
- Subdecay Quasar Phaser
- EarthQuaker Devices Rainbow Machine
- Moog MF Flange
- Dwarfcraft Devices Witch Shifter
- Black Cat Pedals Black Cat Vibe (Proline expression pedal on the far right is hooked up to it)
- EarthQuaker Devices Avalanche Run
- EarthQuaker Devices Astral Destiny
And that’s it! I’m fortunate to play with some of my best friends in a band called the Electric Honeycomb. Blessings to all of you.
Joe Grant Jr: Satisfying Symmetry
My pedalboard is a Temple Audio TRIO 43 Templeboard. All cables—patch, power, and MIDI—are hand-soldered. I have USB ports on the side to update firmware and program MIDI.
Underneath the pedalboard:
- Strymon Zuma
- Strymon Ojais (2)
- Voodoo Lab Control Switchers (2)
- Goodwood Audio Audition
On top:
- Goodwood Audio The TX Interfacer
- Kingtone Battery Box (2)
- Xotic RC Booster
- Dunlop Volume
- Origin Effects Cali76
- TC Electronic Ditto Stereo Looper
- Mythos Argo Octave Fuzz
- Peterson StroboStomp Tuner
- Mythos High Road Fuzz
- Wampler Ratsbane
- J. Rockett The Dude
- Analog Man King of Tone
- Walrus Audio Julianna
- Chase Bliss Automatone Preamp MKII
- Strymon TimeLine
- Chase Bliss Gravitas
- Chase Bliss Thermae
- King Tone The Duellist
- Walrus Audio Slö
- Chase Bliss CXM 1978
- Electro-Harmonix POG2
- Eventide H9 Max
- Universal Audio Golden Reverberator
- Universal Audio Astra
- Universal Audio Starlight
- DigiTech FreqOut
- Catalinbread Echorec
- Morningstar MC8 Midi Controller
Malcolm Carmichael: Like Angels Singing
So many pedals, so little time. I don’t think there’s one pedal I haven’t tried out at some point in time but now I just keep it as simple as possible to have everything I need for the setlist my band plays. Also, I’m terrible with patches and programming. All of these are powered just by a simple Power-All 9V/2A wall wart. I’ve tried lots of power supplies and this is light and reliable.
First, the Mooer Baby Tuner is very simple, works every time. Next, is the Dunlop Cry Baby Mini Wah. I’m the rhythm player in my band, but there are a couple tunes where I solo, and I use this when I’m just winging it. It helps and makes me sound better than I am! I think all distortion pedals are a trade-off, but the MXR Distortion III is as good as any and it’s tried and trusted.
Then we have the Electro-Harmonix Holy Grail Nano. Everybody needs a Holy Grail! I’m always surprised how many pro pedalboards I see it on. Very versatile pedal and easy to use. Next is the Hotone Eko delay: I go through all sorts of these little pedals. I find them in bargain bins. This delay is perfectly fine with all the adjustment you need. The Donner Echo Square is a little gem. It’s got everything, including a reverse, which is what I use it for on an original song we play, but it’s got a lot of other great options as well. I like the TC Electronic Stereo Ditto Looper because it’s so simple.
Lastly, I have one of the best ABY switchers in the game, the Radial BigShot. With this, I send out into a Fender Blues Deluxe Reissue and a Vox AC15. Together they are like angels singing. All we have to do now is get this craziness behind us so we can get gigging again. Cheers!
Matt Straw: The Blackboard
I saw the all-white pedalboard from last year’s reader pedalboards, and it reminded me of my black one. My pedalboard(s) are constantly in a state of evolution: I’ve since ditched most of these and gone back to basics. I was using this board from 2014-2016 back when I lived in Nashville and was in the band Things That Crawl. I’ve always hated branding of any type, and I found the varied colors and designs kinda messy and a distraction.
I’m also a professional guitar tech (Robert Plant, Bonnie Raitt, Jack White, Shania Twain, etc.) and am used to fans trying to sneak a peek at the pedals onstage, so I liked the idea of keeping a bit of mystery there (not that anyone could care less about what I was using).
Here’s the list of pedals:
- Boss Tuner
- Boss NS-2 Noise Suppressor
- Ernie Ball Volume Pedal
- ZVEX Super Hard On
- Electro-Harmonix POG
- Tech 21 NYC SansAmp
- Electro-Harmonix Bassballs
- Electro-Harmonix LPB-1
- Boss DD-7 Digital Delay
- Red Witch Medusa Chorus Tremolo
- Electro-Harmonix POG2
- MXR Classic 108 Fuzz
- Marshall The Guv’nor
I eventually added two EarthQuaker Devices pedals (Organizer and Talons), plus a TC Electronic Alter Ego and an MXR Ten Band EQ.
In 2016, I formed a short-lived band called Buffalo (before moving to Joshua Tree) and built a totally new pedalboard with the El Rey Mystic Fuzz, El Rey Fuzz De La Muerte, Electro-Harmonix POG, TC Electronic PolyTune, and a Lehle Dual. Both the El Rey pedals remain unpainted as I think they look super cool! Enjoy.
Nedim Kirlic: Streamlining in Sweden
I’m a guitarist in Sweden. As a 40-year-old, I decided to build my first pedalboard because I wanted to simplify my rig and give myself fewer options than there are in my Line 6 modeler products. Having said that, I quickly realized that it’s not as simple as just putting a few pedals on there. I wanted a pedalboard with a simple pitch shifter-overdrive-distortion-chorus-delay-reverb setup. But it turns out I needed four utility pedals, and more than one overdrive. I was never into fuzz, but I decided to go for it.
The board right now consists of the list below, with the signal chain in order. Though the Boss delay will probably be moved early in the chain, along with a second reverb that I haven’t gotten yet.
- T-Rex pedalboard, 70 cm wide
- T-Rex Fuel Tank Chameleon isolated power supply, mounted underneath with a rail (two pieces)
- Boss TU-2 Chromatic Tuner
- TC Electronic Brainwaves Pitch Shifter
- MXR Uni-Vibe
- Boss GE-7 Graphic Equalizer
- Donner Noise Killer Noise Gate
- Donner Ultimate Comp Compressor
- MXR GT-OD Overdrive
- Boss BD-2 Blues Driver
- Mad Professor Fire Red Fuzz
- ProCo RAT
- Boss DD-8 Digital Delay
- Electro-Harmonix Canyon Delay & Looper
- TC Electronic Hall of Fame 2 Reverb
- Ibanez Tremolo Mini
- Boss RC-3 Loop Station
- The empty spot is reserved for a Boss IR-200 Amp & IR Cabinet
The signal chain right now is going straight into the front of the amp, but sometimes I use the FX loop. In that case, I put the delay, reverb, and tremolo pedals into the loop. And lastly, the loop pedal is last in my signal chain for trying out quick ideas: I record a riff, loop it, and see what bass notes and what sort of bass line I’m going to play over it. The bass line makes a huge impact on the idea and on the finished song.
Ronald Caminati: Aesthetically Pleasing
Here’s my list of pedals: Dunlop Cry Baby Mini Wah, TC Electronic PolyTune3 Mini, Sweet Sound MoFaux Vibe, Toms’line Cream Distortion, Stax Phaser, Mooer Hustle Drive, Rowin Chorus, and finished off by a Boss FB-2 Feedbacker Booster. All powered by a Pedaltrain Volto.
Steve Kellett: The Family Tree
I recently decided to take a family portrait of my pedalboards. I had to take two photos to get it all covered! Spoiler Alert: I have 12 pedalboards.
In the first image, there’s a custom-built flight case containing a TC Electronic Nova System plus extension footswitch and a Dunlop Mister Cry Baby Super Volume/Wah.
Pictured above that, is a Gator Pedal Tote board with the following on it:
- Boss TU-2 ->
- Barber Tone Press ->
- Fulltone Ultimate Octave ->
- Fulltone Full-Drive 2 FM ->
- Om Labs Sahasrara Overdrive ->
- Fulltone Mini-Deja’Vibe ->
- ZVEX Box of Rock Vexter
(Just to prove that nothing is permanent in the pedal world, the Sahasrara has since been replaced by a Fulltone GT500.)
The second photo (do I really have to do this?) ... DEEP BREATH.
Top row from top left we have my Leftovers Board:
- A beat-up CNB case containing a cheapo tuner
- XFX Boutique Destroyer (Friedman BE-OD clone)
- DemonFX King of Drive (clone of a guess what)
- Twinote Pi Fuzz
- Reverend Drivetrain II
- Twinote BBD Chorus
- Twinote BBD Delay
- Ibanez TS-9 RI
Moving clockwise to the right is my Workhorse Board 1:
- Cry Baby Wah
- LY-Rock King of Tone clone
- ProCo Vintage RAT
- Korg G4
- Rowin tuner
- Ammoon Nano Delay
- TC Electronic Spark Mini Booster
Next, to the right, Grab and Go Board 1:
- Boss BCB-30 board
- Boss DS-1 40th Anniversary Edition (which I won from PG’s Stomboxtober giveaway in 2018)
- Keeley-modded Boss BD-2
- ’80s Ibanez AD9
- Fender in-line tuner that gets used when required
Moving on to the second row and starting on the very left is my Chopping Board 1:
- Rowin tuner
- Muslady Golden Horse (Klon Klone)
- Mosky Red Fox (Timmy-based overdrive, CE-2-based chorus, and a delay; FX loop between overdrive and chorus)
- Mosky Black Rat in the FX loop
- Mosky Spring Reverb
Moving to the right is Chopping Board 2 (Yes, they really are bamboo chopping boards that fit into laptop slip cases):
- Rowin tuner
- Rowin Frenzy fuzz
- Mosky DTC (Suhr Riot-based distortion, TS-9-based overdrive; FX loop, and delay)
- Rowin Nano Phaser in the FX loop
Poor Person’s Pink Flow Board:
- Ghost Fire case
- Tomsline AGF-3 G-Fuzz (Germanium Fuzz Face clone)
- Mosky Mini Muff
- Rowin Tuner
- Mosky Tone Bus (Dyna Comp, TS-9, and OCD clones plus power supply for the board)
- Tom’sline AMS-3 Mod Station
- Mosky Tone Makestation (Plexi distortion, FX loop, EP booster, and delay)
- Mastersound Flanger in the FX loop
- Tom’sline ASR-3 Shaper (cab sim)
- Mosky Mini Clean Buffer
Grab and Go Board 2:
- Ammoon pedalboard (containing all XFX Boutique pedals)
- Nine O Nine (TS-based low-gain overdrive)
- Tikus (RAT clone)
- Classic 741 Distortion (MXR Distortion+ clone)
- Slowpick Analog Delay
Bottom row from left to right:
Workhorse Board 2:
- Boss BCB-60 board
- Korg Pitchblack Mini Tuner
- Boss CS-3 Compression Sustainer
- Keeley DS-1 Ultra Mod
- Keeley SD-1 Overdrive
- Boss JB-2 Angry Driver
- Orange FS-1L
- Boss CH-1 Super Chorus
- Boss DD-8 Digital Delay with Mosky tap tempo
- Mooer Pure Boost
The Cheese Board:
- Pedaltrain Mini
- cheapo tuner
- 6 ModTone Mini-Mod pedals (Fuzz, Distortion, Overdrive, Chorus, Delay, and Boost)
The Hendrix Board:
- Ammoon pedalboard
- Dunlop Hendrix 70th Anniversary Fuzz Face
- Hendrix Octavio
- Hendrix Univibe
Whew! And that concludes my family tree of pedalboards. Strewth!
Taylor Schlupp: Tom Bukovac Inspo
Hey guys! Here’s a pic of my studio board that I use for recording music and YouTube videos. It’s got a bit of Tom Bukovac inspiration here after seeing his Rig Rundown lol.
Signal Chain:
- TC Electronic PolyTune
- J. Rockett Blue Note Overdrive (always on)
- Wampler Belle Overdrive
- Nobels ODR1 Natural Overdrive
- Boss GE-7 EQ
- Joyo Ironman Molo-Trem
- Wampler Faux Tape Echo
- Electro-Harmonix Oceans 11 Reverb
- Truetone 1 Spot Pro CS7 Power Supply
Tom Foreman: Tone Hunters
Hi Folks,
I hope all is well with each of you. I look forward to seeing the issue with these photos because it’s always nice to hunt for ideas. I made the pedalboard out of some hardwood sugar maple wood bits left over from a “music-lesson-for-lumber” trade I did with a local forester. It is roadworthy and weighs a ton (just in case I ever need to stun a drummer with it, I suppose).
This board serves a dual purpose with supporting my acoustics and electrics. For acoustic, I run a 1963 Gibson J-50 and a Crafter D6/N through the Radial Tonebone PZ-Pre Preamp with a SolidGold FX Horizon Compressor in the effects loop.
For the electric side, I run a Gibson ES-339 or my Tele into the following:
- Boss TU-3 Chromatic Tuner
- Midnight 30 Music Upstate Drive (Always on, always awesome! Josh Eiler makes some absolutely killer gear, and this pedal was one of the earlier ones.)
- Late 1980s Pro Co RAT (I got it from Not Just Another Music Shop in Vancouver, BC, while on tour sometime in the early ’90s ... I think)
- Stomp Under Foot Civil War Fuzz (sometimes it sits in for the RAT)
- Barber Electronics Barb E.Q. (boost, grit, chime)
- MXR Six Band EQ (for when I blow a string on my 339 and have to shift over to the Tele mid song)
The effect-loop chain includes: a Line 6 Roto-Machine or TC Electronic Thunderstorm Flanger, a Line 6 DL4, and a Marshall RF-1 Reflector Reverb.
Everything goes into a Dr. Z MAZ 18 NR and a Port City Waves 2x12 cab that I think has one vintage Greenback and one WGS Veteran 30 speaker, but I haven’t looked under the hood in a long time so who knows? Love the magazine and I look forward to it showing up each month!
