The East Coast punk rocker was first drawn in by the "pure malevolence coming out of the speaker" and Eddie's ability to make "pure evil with a guitar."
A new P-/J-style offering that delivers tones fit for the former Van Halen veteran.
Clip 1 - Bridge pickup, tone dial at 75 percent, volume dimed
Clip 2 - Neck pickup, tone dial at 75 percent, volume dimed
Schecter’s Michael Anthony signature bass has plenty in common with the prolific bassist’s playing style. Both have a reliable and rock-solid foundation for delivering the needed goods, but with a little panache here and there to keep things interesting. For Anthony fanatics who have found themselves priced out of owning one of his signature Custom Shop models, the more affordable South Korean-made Diamond Series bass harbors the sleek look and much of the underlying features of its U.S.-bred big brother, but without the eye-popping price tag.
Bottoms Up!
The subdued carbon-grey finish, matching headstock, creme binding, and black hardware on Anthony’s signature instrument give it a sleek and dangerous aura. The fretwork and finish looked impeccable when I scanned the neck and body up close, and its 9.3-pound weight made it a comfortable bass to play standing up while still feeling substantial strapped across my shoulder.
The bass takes several cues from Schecter’s Model-T line of basses and uses them as a foundation to build on. Anthony’s model has an alder body that sports a large single-ply black pickguard. The large-bodied THD4 bridge allows for stringing through the bridge or through the body.
For pickups, Anthony’s bass forgoes the active EMG electronics of the Model-T in favor of a USA MonsterTone P/J set controlled by the master volume, tone, and 3-way selector mounted to a Tele-style control plate. The bass’ multi-ply maple and walnut neck is capped with a bound 21-fret rosewood fretboard, the strings are anchored with a Graph Tech XL Tusq nut, and the neck is attached to the body via a contoured 4-bolt neck joint.
Four on the Floor
The smooth, unfinished neck has a comfortable taper and soft-C profile, making for effortlessly quick transitions up and down the fretboard. There was some noticeable fret buzz when I first pulled the bass out of its shipping box, but I was able to remedy that with a quick adjustment to the truss-rod nut located at the body end of the neck. Thanks to Schecter’s forethought in carving a long channel to access the adjustment nut, I was able to easily perform the task without the irritation of pulling the neck off.
Once I plugged the bass into a Gallien-Krueger 400RB/Ampeg 8x10 pairing and selected the P-style pickup, I went to town playing the verse section of “Mean Street”—my favorite Anthony bass line. After striking the first note, I knew right away that this was a pickup built for power. It delivered a lot more volume than the vintage-voiced Lollar pickup in my P, and even slightly more than the Seymour Duncan Quarter Pounder in another Precision I have on loan.
Ratings
Pros:
Sleek look and solid build. Single-coil pickup is exceptionally full and lively.
Cons:
Would benefit from a blend knob. Bridge pickup sounds can be thin at times.
Tones:
Playability:
Build/Design:
Value:
Street:
$899
Schecter Diamond Series Michael Anthony Signature Bass
schecterguitars.com
The spilt-coil pickup conjured tremendously deep lows, and those lows supported a beefy midrange that brought a healthy dose of articulate punch with a sumptuous low-mid snarl. When I wanted to switch to more subdued lines and a less aggressive tone, the pickup was sensitive enough for me to control dynamics through technique. I wasn’t forced to reach for the volume or tone knobs—or the amp—most of the time. High marks aside, the lows lack some of the classic P-bass warmth. And while it doles out P-bass aggression in spades—which is great for rock and metal—the edginess of its highs doesn’t sit quite as well for mellower jazz, folk, and contemporary blues tones.
The tone made a 180-degree turn when I flipped to the J-style bridge pickup, however, which had a taut and lively low-end thump with a wonderful, rubbery response. Coupled with its scooped midrange and speedy picking response, pulling off involved slap-and-pop riffs was a piece of cake. The nuances of my fingerpicking were more easily heard and the pickup’s focus on accentuating the mids and highs helped flatpicked melodic riffs—à la Geddy Lee and Justin Chancellor—leap out with an extraordinary amount of vigor and precision. The sound wasn’t as full as what I got from the split-coil pickup, but I was able to coax out a little more girth using a vintage Ibanez CP9 compressor and some careful tweaking.
Together the pickups complimented each other beautifully by yielding a nice middle ground between the split-coil’s fat and proud delivery and the bridge’s drum-tight lows and quick response. While I liked the simplicity of the 3-way switching, I would have really liked the ability to experiment with blending the pickups to different degrees. Working the P-style pickup and bringing in the bridge pickup’s signal just enough for its snappy high end to be heard with harder picking is a sound I would have been interested in checking out.
The Verdict
Schecter’s Michael Anthony signature bass hits high marks for playability, tone, and simplicity. It’s not trying to reinvent the wheel, thankfully, because a bass geared for plugging in and rocking really shouldn’t have to. Heavier players will likely find that its stock pickups dish out more than enough volume and girth for the thickest of riffs. Vintage rockers, however, might find the output to be a little overwhelming at times. All said, if you’re looking for a solid bass without a ton of bling getting in your way, Anthony’s new tool of the trade is worth checking out.
Watch the Review Demo:
Similar to Peavey’s popular VB-3 bass amplifier, the dual-channeled VB-MA is styled with a striking red backlit panel that features Michael Anthony’s chili pepper logo.
Anaheim, CA (January 24, 2013) – Peavey Electronics, known for its commitment to tonal quality and innovation, today announces the new Michael Anthony VB-MA signature tube-powered bass amplifier. This 300-Watt all-tube head packs a low-end punch, while weighing in at an extremely portable 38 lbs.
As a member of legendary bands, Michael Anthony has toured the globe, performing before millions of people. Currently with the supergroup Chickenfoot, Anthony has relied on the Peavey VB-3 exclusively and is now proud to share a uniquely voiced model that suits his exacting demands perfectly.
Similar to Peavey’s popular VB-3 bass amplifier, the dual-channeled VB-MA is styled with a striking red backlit panel that features Michael Anthony’s chili pepper logo. The VB-MA combines four 12AX7 and two 12AT7 preamp tubes with a matched octet of EL34 tubes that give players tons of characteristic pentode tube tone with uncharacteristically tight response for an all-tube amplifier. An innovative, and tour necessary world-compatible switch-mode power supply and advanced design provide stadium levels of explosive tonality.
When it comes to live performance, Anthony insists on rock solid tonal control. That’s why the VB-MA is loaded with a true independent second overdrive channel with separate EQ and Master Volume controls. But Anthony and Peavey didn’t stop there. The addition of a unique Blend control enables players to blend between overdrive and clean channels for even more tonal flexibility.
Backing up the amplifier’s organic tube tone is a vintage three-band active/mid-cut EQ that combines traditional high and low tone controls with a mid control featuring a four-position midrange selector switch that allows players to set the mid-frequency at 200, 450, 600 or 800 Hz. Combined with the nine-band, constant-Q graphic equalizer—spaced at optimized frequencies, with each slider providing 15 dB of cut and boost—the VB-MA allows for virtually any EQ curve imaginable.
Peavey’s patented Resonance and Presence controls, which adjust the damping factor at the low and high ends, respectively. The VB-MA features a three-way speaker impedance selector, to enable players to match the VB-MA to virtually any bass speaker enclosure. Resonance and Presence are also useful in dialing in power and response for particular styles, including “tight” sounds that are not normally associated with tube amplifiers.
Voiced and styled to match the VB-MA tube bass amplifier, the new VM-810 bass enclosure features the exclusive Michael Anthony logo, and eight custom-designed 10” ceramic-magnet loudspeakers paired into four tone chambers. It can be operated in stereo or mono modes with 800 Watts power handling.
Michael Anthony VB-MA Signature Bass Amp Features:
• Eight EL-34, Four 12AX7 and two 12AT7 tubes
• Universal power supply for worldwide compatibility
• Overdrive with blend control for blending in the overdrive with the clean channel with EQ control
• Striking red backlit panel with Michael Anthony’s chili pepper logo
• Volume/Overdrive
• Low/Mid/Shift/High
• Bright switch
• Low cut switch
• Tube compressor with Level control
• Master 9-band graphic EQ with defeat switch and LED
• Master volume
• Master Resonance and Presence controls
• Single input
• 15 dB Pad switch
• Mute switch with flashing blue LED
• Power and Standby switches
• Back-lit faceplate for Pilot
• Buffered tuner send
• Master effects loop
• 300 Watts
For more information:
www.peavey.com