
This crash course in country guitar will inject your rock and blues playing with a brand-spankin’ new spark.
The key that unlocks the door to country guitar is hybrid picking—simultaneously or alternately playing notes with both pick and fingers. If you have any experience playing fingerstyle guitar, it’s sure to come in handy here. If not, no worries! Here’s your chance to start. Now, some of the musical examples below can surely be played with a pick only, but the magic is in the snap you get when you pluck the strings with your fingers.
SRV & EVH Bridge the Gap
Let’s ease into hybrid picking with a couple of related examples from the blues and rock world to demonstrate how country techniques can spice up your playing. Inspired by blues legend Albert King, who exclusively played fingerstyle, Stevie Ray Vaughn would unleash stinging notes from his high E string by plucking with his middle finger. First, try playing Ex. 1 with a pick. Then, while holding your pick normally, use the tip of your middle finger to reach under the first string, pulling it away from you, then quickly releasing. This will cause the string to slap against the fret, resulting in a satisfying, biting attack. The final note is picked, but you can try plucking here as well.
Let’s see how it’s done by the man himself, as he sits in with his idol in the following video. Notice how he plucks the first two notes country-style, lending them a sharpness that contrasts so well with the picked notes which follow.
In the music video for Van Halen’s “Finish What Ya Started,” a quasi-country song from 1988’s OU812, Eddie Van Halen dons his cowboy hat (quite literally, as you’ll see in a moment) and masterfully cranks out a classic country-style lick often heard in R&B, blues and rock. It’s one which is dominated by major and minor sixths played on non-adjacent strings. Ex. 2 is along the same lines, and you’ll need to alternately play picked notes on the 3rd string and SRV-style plucked notes on the 1st.
Sure, that sounds okay, but now let’s really countrify it. In Ex. 3, we present the same basic lick, but notice how all of the notes on the 3rd string (except the very first) are now deadened. To achieve this, lightly rest your fret-hand finger on the string at roughly the same locations as in Ex. 2, creating a pitchless, percussive sound, a technique integral to country playing. And be sure to play the 1st-string notes staccato (short) as indicated by the dots above the noteheads. Now you’re beginning to sound like a bona fide country player!
Truck Stops and Double-Stops
Let’s take a gander at country and jazz guitar legend Danny Gatton (once known as “the world’s greatest unknown guitarist”) playing a catchy, hybrid-picked chordal riff.
Ex. 4 takes a similar tack and will have you alternating picked notes and dyads (two-note chords), plucked with your middle and ring fingers. In bars 2 and 4, check out how hybrid picking allows you to continue the groove while simultaneously adding some snappy fills on top.
Let’s continue with that same technique, but with a twist. First, check out British country master Albert Lee playing the main riff to “Bullish Boogie” from his 1986 album Speechless.
Ex. 5 will have you playing a similar type of phrase. After plucking each of the dyads, pull off to the open 3rd string for an added rhythmic bounce—which leads us smack dab into what just might be the most fun you’ll have all day.
Open-String Magic
We’ve just had a small taste of what open strings have to offer. But they’re even more powerful, allowing you to zip up and down the fretboard in dramatic fashion. Brad Paisley is a guru of open strings, as you’ll see here:
Ex. 6 would fit right into Paisley’s wheelhouse. Here, it’s imperative to play the accented notes a little louder. For country pickers, this means to pluck harder with your middle finger, so as to get an even sharper snap. It’s a bit shocking how simply using the open 3rd string as a pivot allows you to shift positions at the speed of light.
Ex. 7 is a similar idea, but this time we’re moving down the fretboard, palm-muting the 5th string to create even more of a contrast between the picked and plucked notes, which are again accented.
Whew! Let’s take a quick break to catch Jerry Donahue of the Hellecasters tearing up the Jerry Reed classic “The Claw.”
Stealing from the Steel-ers
Country pickers love to, shall we say “borrow,” some of pedal steel players’ favorite moves. You likely have already played a host of rock-centric oblique bends—a two-string affair where one note is allowed to ring while the other is bent—allowing you to come close to approximating the sound of a pedal steel. But if you’re new to country guitar, chances are you haven’t encountered anything quite like Ex. 8.
To pull this one off, you’ll need to execute tricky 3rd-string bends with your index finger by pulling the string down towards the floor. Plus you’ll need to do it while fretting the 4th and 5th strings with your pinky and ring finger, respectively. Take a deep breath and go for it.
This last one’s just for extra credit, and it involves countrifying oblique bends with another signature pedal steel move: harp harmonics. First, let’s check out Ex. 9.
To execute these harp harmonics, fret the indicated note as usual. Then you’ll see another number in parentheses located 12 frets above. Next, lightly touch the string with your pick-hand index finger directly over the fret, while holding your pick between your thumb and middle finger. (You can also set down the pick and pluck with your thumb instead.) Finally, strike the string with your pick on the bridge side of your index finger. The result is a shimmering harmonic one octave above the fretted note.
Well, that’s a wrap. If you give yourself some time to experiment with hybrid picking and the fun ideas we covered in this lesson, you’ll invariably hit on some new ones of your own, sure to perk up your rock and blues playing. Finally, Greg Koch, grand master of chicken pickin’ (and pretty much everything else guitar) will fittingly play us out with his unique brand of gristled, country-fried rock.
Here’s how 21 killer players from the past year of Rig Rundowns—including Justin Chancellor, Zakk Wylde, MonoNeon, Carmen Vandenberg, Sturgill Simpson, Jason Isbell, and Grace Bowers—use stomps to take their sounds outside the box.
TOOL'S JUSTIN CHANCELLOR
Justin Chancellor’s Pedalboard
If you ever catch yourself playing air guitar to Tool, you’re probably mimicking Justin Chancellor’s parts. “Schism,” “The Pot,” “Forty Six & 2,” “H.,” “Fear Inoculum,” “Descending,” “The Grudge,” and plenty of others feature his buoyant bass riffs.
What stomps does he run his Wal, StingRay, and Fender basses through? Glad you asked. His setup is either a bass player’s dream or nightmare, but for someone as adventurous as Chancellor, this is where the party starts.
You’ll notice many of his pedals are available at your favorite guitar store, including six Boss boxes, an Ernie Ball Volume Pedal, and MXR Micro Amp. Crucial foot-operated pedals are in blue: the Dunlop JCT95 Justin Chancellor Cry Baby Wah with a Tone Bender-style fuzz circuit (far left) and DigiTech Bass Whammy (middle). He really likes using the Tech 21 SansAmp GT2 for distortion and feedback when the Whammy is engaged or he’s playing up the neck. Covering delays are three pedals—he has the pink Providence DLY-4 Chrono Delay programmed to match drummer Danny Carey’s BPMs in “Pneuma,” which slightly increase during the song from 113 ms to 115 ms. The Boss DD-3s are set for different speeds with the one labeled “Faster” handling “The Grudge” and the other one doing more steady repeats. There’s a pair of vintage Guyatone pedals—the Guyatone VT-X Vintage Tremolo Pedal (Flip Series) and Guyatone BR2 Bottom Wah Rocker (a gift from guitarist Adam Jones). The Gamechanger Audio Plus pedal is used to freeze moments and allow Justin to grab onto feedback or play over something. The Boss GEB-7 Bass Equalizer and Pro Co Turbo RAT help reinforce his resounding, beefy backbone of bass tone, while the MXR Micro Amp helps goose his grimy rumbles. The Boss LS-2 Line Selector is a one-kick escape hatch out of the complicated signal chain for parts of “Schism.” The Wal and Music Man stay in check with the TU-3S tuner, a pair of Voodoo Lab Pedal Power 2 Pluses help bring things to life, and everything is wired up with EBS patch cables.
STURGILL SIMPSON AND LAUR JOAMETS
Sturgill Simpson’s Pedalboard
Alt-country veteran Sturgill Simpson packed light for his latest run. His board bears just a Peterson Stomp Classic tuner running into a Fulltone True-Path ABY-ST, which splits his signal to his two Magnatone Panoramic Stereo amps. “I wouldn’t use a tuner if I didn’t have to,” he chuckles. The LILY P4D beside the splitter lets him control his mic signal to cut interference from onstage noise.
Laur Joamets’ Pedalboard
For his main board, Laur Joamets packs a little heavier than his boss. The platform, made by West Coast Pedal Board, carries a Peterson StroboStomp, Greer Amps Arbuckle Trem, sRossFX fuzz/overdrive, MXR Booster, T-Rex Replica, sRossFX germanium octave pedal, TC Electronic Viscous Vibe, Dunlop EP103 Echoplex, and Source Audio True Spring Reverb. An MXR Tap lets him tap in delay tempos. He has a second pedalboard, as well, for his Stage One steel guitar. It goes into a Peterson StroboStomp HD, then on to a Greer Black Tiger and Goodrich Sound Company volume pedal, before hitting his Magnatone Varsity Reverb and a custom-built Fender brown-panel Deluxe clone he calls “the Charmer.”
PANTERA’S ZAKK WYLDE AND REX BROWN
Zakk Wylde’s Pedalboard
When Pantera’s bassist Rex Brown and singer Phil Anselmo decided to fire the band up again, the choice of fellow road dog Zakk Wylde on guitar seemed perfect. Here’s what Wylde had on the floor and in the racks for the band’s February date at Nashville’s Bridgestone Arena.
His signature arsenal of effects seen here includes a MXR Wylde Audio Overdrive, MXR Wylde Audio Phase, Wylde Audio Cry Baby wah, and a Dunlop ZW357 Zakk Wylde Signature Rotovibe. The lone box that isn’t branded Wylde is a standard fare MXR Carbon Copy. Offstage, his rack is home to a MXR Smart Gate and MXR Wylde Audio Chorus that’s always on. Both are powered by a Voodoo Lab Pedal Power 3 Plus. Another drawer holds a Radial BigShot I/O True-bypass Instrument Selector, Lehle Little Dual II Amp Switcher, and a Radial BigShot EFX Effects Loop Switcher.
Rex Brown’s Pedalboard
This tour was the first time Rex Brown used a switching system. His stage board sported a Dunlop JCT95 Justin Chancellor Cry Baby Wah, a 2000s Morley Pro Series II Bass Wah, Origin Effects DCX Bass Tone Shaper & Drive, a MXR M287 Sub Octave Bass Fuzz, and a Peterson StroboStomp HD. The brain of everything in the rack and onstage is the RJM Mastermind GT. And to help “move mountains,” Rex has a Moog Taurus III.
MSSV’S MIKE BAGGETTA AND MIKE WATT
Mike Baggetta’s Pedalboard
Mike Baggetta has some core pedals in MSSV, his indie supergroup with legendary bassist Mike Watt and drummer Stephen Hodges. His arsenal includes a Creepy Fingers Hold Tight fuzz, an Electro-Harmonix Ring Thing, a Wilson Effects Freaker Wah V2, an EHX Deluxe Memory Man, and a Red Panda Tensor. The signal flows from his Benson amp into the Tensor, which he uses for glitch sounds, harmonizing, and overdub mode, among other feats. His Memory Man adds space—the final frontier.
Mike Watt’s Pedalboard
Mike Watt puts his signature Reverend Wattplower bass into a Broughton Audio high-pass filter, an EarthQuaker Devices The Warden optical compressor, and a Sushi Box Effects Finally tube DI that functions as a preamp. There’s also a TC Electronic PolyTune.
MONONEON
MonoNeon’s Pedalboard
The Memphis-born avant-funk bassist keeps it simple on the road with a signature 5-string, a tried-and-true Ampeg stack, and just four stomps. Almost all of his stomps have been zhuzhed up in his eye-popping palette. He’d used a pitch shifting DigiTech Whammy for a while, but after working with Paisley Park royalty, the pedal became a bigger part of his playing. “When I started playing with Prince, he put the Whammy on my pedalboard,” Thomas explains. “After he passed, I realized how special that moment was.” MonoNeon also uses a Fairfield Circuitry Randy’s Revenge, a Fart Pedal (in case the Fairfield ring mod isn’t weird enough, we guess), and a JAM Pedals Red Muck covers fuzz and dirt needs. A CIOKS SOL powers the whole affair.
GRACE BOWERS
Grace Bowers’ Pedalboard
Grace Bowers is one of the freshest new guitar stars to emerge in the past year. She has the essential fixin’s for her classic rock tones: a Dunlop Crybaby Wah, Grindstone Audio Solutions Night Shade Drive, EarthQuaker Devices Tone Job, MXR Phase 90, MXR Phase 95, and Boss DD-2. Bowers powers them with a Voodoo Labs Pedal Power ISO-5.
GREEN DAY’S JASON WHITE
Photo by Raph Pour-Hashemi
Jason White’s Pedalboard
Long-time touring member Jason White’s stable is dominated by his Gibson Les Pauls and ES-335s. A Shure wireless system sends his signal to a rack set-up with an ISP noise gate, just in case White’s P-90s are picking up a lot of noise. From there, it hits a Dunlop Cry Baby and DVP1XL, then a MIDI-controllable RJM Effect Gizmo, which handles White’s effects: an MXR Reverb and Poly Blue Octave, Strymon TimeLine and Mobius, API Select TranZformer GTR, and a Custom Audio Electronics 3+SE Guitar Preamp, which gets engaged for clean tones and small combo sounds. A Lehle Dual SGoS Switcher and Fishman Aura DI Preamp handle changes with the piezo-equipped guitars. A Strymon Zuma provides the juice.
BONES UK’S CARMEN VANDENBERG
Carmen Vandenberg’s Pedalboard
Carmen Vandenberg covers a lot of ground with her Bones UK guitar sounds, and she’s got a carefully curated collection of stomps to span the territory. Her guitar first hits an Ernie Ball Cry Baby before running through the rest of the pedals: a Boss TU-3, Fulltone OCD, Supro Drive, Pigtronix Octava, EHX Micro POG, Supro Chorus, Blackstar Dept. 10 Boost, EarthQuaker Devices Dispatch Master, MXR Carbon Copy Deluxe, Catalinbread Belle Epoch, and Boss NS-2. A Live Wire Solutions ABY manages the signals on their way to her signature Blackstar CV30s.
BLACK PUMAS’ ADRIAN QUESADA, BRENDAN BOND, AND ERIC BURTON
Adrian Quesada’s Pedalboards
Adrian Quesada loves tremolo and reverb, and uses a Strymon Flint for both. His other main stomp is the Electro-Harmonix Holy Grail that provides a healthy dose of spring reverb. Also along for the tour: a Line 6 Echo Park, a Catalinbread Echorec, a Boss GE-7 Equalizer, a Catalinbread Belle Epoch, and an EarthQuaker Devices. The Fulltone Clyde Wah Deluxe has stepped in for a different filter sweeper. There’s also a JAM Pedals Ripple two-stage phaser, and a TC Electronic PolyTune2 Noir keeps his guitars in check. That’s all on board one.
His second board includes a JHS 3 Series Delay, a JHS Crayon, and an Electro-Harmonix Nano POG. Utility boxes on here—Strymon Ojai, JHS Mini A/B, and TC Electronic PolyTune—handle switching, tuning, and power.Brendan Bond’s Pedalboard
Three pedals get the job done for Mr. Bond: an Acme Audio Motown D.I. WB-3 passive D.I., a JHS Colour Box, and a Boss TU-3 Chromatic Tuner.
Eric Burton’s Pedalboard
Frontman and guitarist Eric Burton is the band’s lone wireless member. To accommodate his onstage prowling, tech Bryan Wilkinson uses a Radial JDI passive direct box that takes in the XLR from the audio subsnake wireless rackmount and routes it into the first pedal: a Boss TU-3 Chromatic Tuner. From there, Burton only has a couple pedals—a DigiTech Mosaic to mimic a 12-string for “OCT 33” and a JHS Colour Box for any required heat. A Strymon Ojai turns everything on.
JASON ISBELL AND SADLER VADEN
Jason Isbell’s Pedalboards
Jason Isbell could open a huge gear shop just by clearing off his boards and racks. First off, he has a complex wet/dry/wet setup that is parsed out via a RJM Mastermind, with two Magnatone Twilight Stereo combos carrying the all-wet effects. There’s also a Radial JX44v2, which serves as the core signal manager. Above it, on the rack, is an Echo Fix Chorus Echo EF-X3R. Moving up the rack, one drawer includes an Ibanez DML10 Modulation Delay II, EarthQuaker Devices Tentacle, and a trio of stereo-field-only effects: a Boss MD-500, Strymon Volante, and Hologram Electronics Microcosm. Another level up, you’ll find a Chase Bliss Preamp Mk II, Chase Bliss Tonal Recall Delay, Chase Bliss Dark World Reverb, Chase Bliss Condor EQ/Filter, Chase Bliss Gravitas Tremolo, Chase Bliss CXM-1978 Reverb (stereo-field only), Keeley 30ms Automatic Double Tracker, gold Klon Centaur, Analog Man Sun Lion Fuzz/Treble Booster, Analog Man King of Tone with 4-jack mod, Keeley 4-knob CompROSSor, Pete Cornish OC-1 Optical Compressor, EHX Micro POG, Analog Man ARDX20 Delay, and a trio of Fishman Aura Spectrum DIs.
Sadler Vaden’s Pedalboard
Isbell’s 6-string sparring partner Sadler Vaden’s pedalboard chain starts with a Dunlop Clyde McCoy Wah, then a Lehle volume pedal, which feeds the Gig Rig. He uses a Line 6 M5 with a Dunlop expression pedal for a lot of modulation effects. Other pedals include a Crowther Prunes & Custard, Nordvang No.1, an Analog Man Dual Analog Delay, Comp, and King of Tone, a Strymon BlueSky, and a Greer Lightspeed. Every effect is isolated into the Gig Rig. The board has four outputs, two for each side of his 3rd Power British Dream, one for a Marshall plexi, and one that goes to an aux line and splits to a Vox Pacemaker. The auxiliary line is as a backup in case Sadler’s amps go down. It consists of a Strymon Iridium into a Seymour Duncan Power Stage that goes to FOH. And finally, his acoustic pedalboard sports a Shure wireless running into an ART Tube MP/C preamp into a L.R. Baggs Venue DI, with a Radial Engineering Bigshot selector.
MICHAEL LEMMO
Michael Lemmo’s Pedalboard
Rising star player Michael Lemmo relies on his stomps for tone sculpting, but he doesn’t need much to get the job done. His signal hits a Korg tuner, followed by an Xotic EP Booster, Bearfoot FX Honey Bee OD, Red Panda Context, Boss DD-7, and TC Electronic Ditto. They’re all juiced by a Truetone 1 Spot Pro CS7.
HELMET’S PAGE HAMILTON
Page Hamilton’s Pedalboard
Page Hamilton used to travel with a full Bradshaw rig with rack gear, but he’s reduced things to a pair of Eventide H9 units and a handful of Boss boxes—a PS-5 Super Shifter, a MT-2W Metal Zone Waza Craft, a TS-2 Turbo Distortion, a NS-2 Noise Suppressor, and a FB-2 Feedbacker/Booster. A couple of Peterson Stomp Classic tuners keep his ESP Horizons ready, and a Boss ES-5 Effects Switching System organizes all his sounds and settings.
BARONESS’ JOHN BAIZLEY, GINA GLEASON, AND NICK JOST
John Baizley’s Pedalboard
The Baroness frontman’s board is packed with staged dirt boxes and tasteful mod stomps, all held in check with a GigRig G2, Peterson StroboStomp, and Ernie Ball Volume Pedal. The crown drive jewels are a heavily modded EHX Big Muff and Crowther Double Hot Cake, but a Beetronics FX Overhive and Pro Co RAT add sizzle, too. A Boss DD-3, DM-2W, and TR-2, EarthQuaker Devices Dispatch Master and Tentacle, MXR Phase 90 and Dyna Comp, and EHX Deluxe Memory Man handle the rest, while a DigiTech Whammy lurks for its moment to blast off.
Gina Gleason’s Pedalboard
Gleason’s favorite drive these days is the EQD Zoar. Piling on top of that are a MXR Super Badass Distortion, MXR Timmy, modded EHX Big Muff, and a touchy Philly Fuzz Infidel prototype; an Xotic SP Compressor and UAFX 1176 Studio Compressor tighten things up when needed. Three time machines—the Strymon TimeLine, EQD Space Spiral, and Boss DD-3—handle delay, and a Walrus Slo dishes out reverb. The MXR EVH Phase 90 adds some color along with another DigiTech Whammy. The Ernie Ball Volume Pedal, Peterson StroboStomp, and GigRig G2 finish the line-up.
Nick Jost’s Pedalboard
The bassist’s board is powered by an MXR Iso-Brick, with an Ernie Ball Volume Pedal and Boss TU-3 pulling utility duties before an Xotic Bass BB Preamp, Boss ODB-3, DOD FX69B Grunge, MXR Stereo Chorus, and Tech 21 SansAmp Bass Driver DI.
WOLFMOTHER’S ANDREW STOCKDALE
Andrew Stockdale’s Pedalboard
When we walked into Nashville’s Eastside Bowl for this Rig Rundown with Wolfmother’s alpha canine, Andrew Stockdale, it sounded like he was playing his SG through a Marshall stack at head-ripping volume. Nope! Stockdale was blasting skulls apart with a Line 6 HX Stomp doing the heavy tonal lifting. The rest of his board’s layout is a Snark floor tuner, an EHX Micro Synth (a Wolfmother staple), an Xotic AC Booster, an EHX Micro POG, a Dunlop Cry Baby 535Q Multi-Wah, a Boss TR-2 tremolo, a CIOKS DC5 power supply, and Shure GLXDC+ wireless.
FEARLESS FLYERS' CORY WONG AND MARK LETTIERI
Cory Wong’s Pedalboard
Through a Shure GLXD16 wireless system, Cory Wong flows his guitar into his Neural DSP Quad Cortex, which runs a beta version of his Archetype: Cory Wong plugin, based off of a melding of a Dumble and a Fender Twin. The signal hits an onboard envelope filter and rarely used pitch shifter, then exits out the effects loop into a Wampler Cory Wong Compressor, Jackson Audio The Optimist, and a Hotone Wong Press. The signal goes back into the Quad Cortex, where there’s a preset phaser, stereo tape delay, and modulated reverb, plus a freeze effect. Two XLR outs run to front of house, while two run to Wong’s Mission Engineering Gemini 2 stereo cabinet.
Mark Lettieri’s Pedalboard
Mark Lettieri’s signal first hits a Keeley Monterey Custom Shop Edition, followed by an MXR Deep Phase, J. Rockett HRM, J. Rockett Melody OD (Lettieri’s signature), Pigtronix Octava, and a Dunlop DVP4, all powered by a Strymon Ojai. A TC Electronic TonePrint Plethora X5 pedalboard handles coordination and switching between the devices.
SLASH’S BLUES BALL BAND
Slash’s Pedalboard
“I haven’t had a pedalboard in front of my feet since the ’80s,” Slash told us. But with the Blues Ball tour, he kept it simple, stomping his own boxes. His chain includes a Peterson StroboStomp, Dunlop Cry Baby, MXR CAE Boost/Line Driver, Ibanez TS9 Tube Screamer, MXR EVH90, BBE Soul Vibe Rotary Simulator, Boss DD-3 Digital Delay, and MXR Uni-Vibe, with everything powered by a Voodoo Lab Pedal Power 2 Plus. All pedals are taped down with their settings dialed in. When his signal leaves the board, it hits a Whirlwind Selector A/B box, where it splits off between his amps and his Talk Box rig.
Tash Neal’s Pedalboard
Tash Neal keeps a modest pedalboard at his feet: a D’Addario Chromatic Pedal Tuner, Dunlop Cry Baby, XTS Custom Pedals Precision Multi-Drive, EHX Green Russian Big Muff, and a Fender Waylon Jennings Phaser, powered by a T-Rex Fuel Tank.
RANCID’S MATT FREEMAN
Matt Freeman’s Pedalboard
Bassist Matt Freeman’s signal goes wireless into one of his Avalon U5 Class A Active Instrument DI and Preamps, and then through a Way Huge Pork Loin Overdrive, set to give his Bassman a good push.
CHRISTONE “KINGFISH” INGRAM
Kingfish’s Pedalboard
Kingfish’s signal starts with a Shure Wireless BLX4, which hits a Boss TU-3w Chromatic Tuner. From there, the route is a Dunlop Cry Baby Mini Wah, a Marshall ShredMaster, and a Boss DD-3 Delay. The pedals live on a Pedaltrain Nano board and were assembled by Barry O’Neal at XAct Tone Solutions.
DIXIE DREGS’ STEVE MORSE
Steve Morse’s Pedalboard
Steve plays through a pair of 3-channel Engl Steve Morse signature 100-watt amps—one wet, one dry—but his pedal chain is relatively simple: a Keeley Compressor, two Ernie Ball volume pedals, two TC Flashbacks, a TC Electronic Polytune, and a foot controller for his Engls.
Tighten up your rhythm playing by focusing on how to get a great sound, balancing your wrist and elbow, and understanding how to subdivide rhythms.
Nile Rodgers brings the rhythm at Bonnaroo 2018.
How the rhythm-playing hitmaker behind Chic—and our columnist—learned to love pop music, and why maybe you should, too.
When Nile Rodgers speaks, we should listen. His seminal work with his own band, Chic, as well as Sister Sledge, Michael Jackson, Mick Jagger, Eric Clapton, Peter Gabriel, Madonna, David Bowie, and Daft Punk, has made him a legend. He also filmed an entertaining Rig Rundown with PG just last year.
I recently listened to his 2017 South by Southwest address, where he told a story about a formative moment in his life. Nile was complaining to his guitar teacher, Ted Dunbar, about having to sing the Archies’ “Sugar, Sugar”at an upcoming cover band gig. Dunbar replied, “Let me tell you something. Any song that sells and gets to the Top 40 ... is a great composition.” Rodgers was skeptical. Then Dunbar added, “Especially ‘Sugar, Sugar.’ That has been No. 1 for four or five weeks.” Next, Dunbar said something that changed Rodger’s life. “‘Sugar, Sugar’ was successful,” he said, “because it speaks to the souls of a million strangers.” Rodgers noted: “Two weeks later, I wrote a song called ‘Everybody Dance.’” Released in 1977, it was a Top 40 single on Chic's first album.
In a BBC This Cultural Life interview, Rodgers said that Dunbar “described an artist to me. I wasn’t an artist until he defined that. I wanted to speak to the souls of a million strangers, but I thought what I wanted to do was speak to some real cool people hanging out in jazz clubs.”
“Everybody Dance” and “Sugar, Sugar”both have hypnotizingly simple lyrics you inevitably replay in your head. Humans like chants, cheers, slogans, and catchy choruses. Rodgers' success came, at least in part, from opening himself up to simplicity that appeals to the masses instead of the complexity that appeals to jazzers. That’s the irony. Jazz, which ostensibly is all about freedom, is often restrictive. Like the old joke goes, jazzers play millions of chords for four people. Pop, rock, and country artists play four chords for millions of people.
Rodgers said, “That's what my teacher taught me, that anti-snobbery. Be open. Love all the music you are around, or at least try and appreciate what that artist is trying to say. Try and have, what we call in the music business, big ears.”
My friends and I have all, at times, been music snobs. I went through a blues binge in my youth where I was prejudiced against shredders. This was not uncommon at the time. After Nirvana hit with Nevermind in 1991, suddenly musicians were openly mocked for playing complex, difficult parts. It was almost like if you cared enough to really learn to play guitar, you were uncool. That was a big relief for me, as I could play neither complex nor difficult parts at the time.
“Taylor Swift is the Beatles of my daughter’s generation.”
Later, when I moved to Nashville, I was all about clean Telecasters and thought ill of music with lots of dirt or effects. Younger me would have plenty of condescending quips about my current love of overdriven humbuckers and delay. Most of my snobbery was driven by my deep insecurities, but part of it was tribalism. The heart wants what it wants; when you find your musical tribe, most of the young zealots trade all others for their one true religion. It might be the only way to get good at something.
On the other hand, my friends and I listen to a variety of music, but the common factor is it usually involves good guitar playing. We love what we love because it speaks to our souls. But most guitar players are drawn to those who are doing what we wish we could do. My uncle Fred used to say, “There’s nothing wrong with being a snob. It just means that you have good taste.”
Between club dates, sessions, and the occasional TV gig, I play with tons of people. I have no say in the set list, so “Sugar, Sugar” moments are unavoidable. I used to feel deep shame playing those types of songs, like it reflects poorly on my personal taste or abilities. In short, I was prejudiced until I saw all of the true pros who could find something beautiful, challenging in the seemingly mundane. It’s like the old actor’s adage: There are no small parts, just small players.
According to Forbes, Taylor Swift was “The Biggest Artist in the World in 2023.” That being the case, her songs inevitably come up on cover gigs. When this happens, some musicians might groan, like it makes them cool to hate on pop culture. But that’s probably because they don't really know her work. Taylor Swift is my 8-year-old daughter’s Alexa go-to, so I know Taylor’s catalog really well. Turns out, it’s amazing, full of truly catchy, engaging, touching songs. Taylor Swift is the Beatles of my daughter’s generation. Snobs will think that statement is heresy, but snobs often don’t know what they are talking about, and they never have as much fun as the people who are dancing violently to “Shake It Off,” or singing with eyes closed to “All Too Well.”Meet Siccardi Number 28: a 5-ply, double-cut solidbody tribute to Paul Bigsby’s “Hezzy Hall” guitar.
Reader: Mark Huss
Hometown: Coatesville, PA
Guitar: Siccardi Number 28
May we all have friends like Ed Siccardi—along with a rare stash of tonewoods and inspiration to pay tribute to a legendary luthier.
I have too many guitars (like at least some of you I’m sure), but my current No. 1 is a custom guitar made for me by my friend Ed Siccardi. Ed is an interesting and talented fellow, a retired mechanical engineer who has amazing wood and metal shops in his basement. He also has an impressive collection of tonewoods, including rarities like African mahogany and some beautiful book-matched sets. He likes to build acoustic guitars (and has built 26 of them so far), but decided he wanted to make me an electric. The fruit of this collaboration was his Number 27, a Paul Bigsby tribute with a single-cut body—looking very much like what Bigsby made for Merle Travis. Note that Bigsby created this single-cut body and “Fender-style” headstock way before Gibson or Fender had adopted these shapes. This was a really nice guitar, but had some minor playing issues, so he made me another: Number 28.
Number 28 is another Paul Bigsby tribute, but is a double cutaway a la the Bigsby “Hezzy Hall” guitar. This guitar has a 5-ply solid body made of two layers of figured maple, cherry, swamp ash, and another layer of cherry. The wood is too pretty to cover up with a pickguard. The tailpiece is African ebony with abalone inlays and the rock-maple neck has a 2-way truss rod and extends into the body up to the bridge. It has a 14" radius and a zero fret. Therefore, there is no nut per se, just a brass string spacer. I really like zero frets since they seem to help with the lower-position intonation on the 3rd string. The fretboard is African ebony with abalone inlays and StewMac #148 frets. The peghead is overlaid front and back with African ebony and has Graph Tech RATIO tuners. The guitar has a 25" scale length and 1.47" nut spacing. There are two genuine ivory detail inlays: One each on the back of the peghead and at the base of the neck. The ivory was reclaimed from old piano keys.
This is Number 27, 28’s older sibling and a single-cut Bigsby homage. It’s playing issues led to the creation of its predecessor.
I installed the electronics using my old favorite Seymour Duncan pairing of a JB and Jazz humbuckers. The pickup selector is a standard 3-way, and all three 500k rotary controls have push-pull switches. There are two volume controls, and their switches select series or parallel wiring for their respective pickup coils. The switch on the shared tone control connects the bridge pickup directly to the output jack with no controls attached. This configuration allows for a surprisingly wide variety of sounds. As an experiment, I originally put the bridge volume control nearest the bridge for “pinky” adjustment, but in practice I don’t use it much, so I may just switch it back to a more traditional arrangement to match my other guitars.