
CopperSound unveils a compact fuzz pedal and a boost stompbox that features a toggle switch for selecting three different mid-range types.
Renegade Multi-Bias Fuzz | CopperSound Pedals
Introducing our latest potent sonic disruptor, in a pint-sized package! Renegade is a simple, no-frills fuzz device with a compact and straightforward interface; a complement to our growing line of Mini Pedals. Derived originally from the classic Tone Bender MK1.5, Renegade strays off the standard path, in part due to its integrated bias control. This toggle switch allows the player to easily select between two different bias voltages; resulting in a classic, full-bodied-fuzz tone in the “up” position, and a more modern and gated fuzz in the “down” position. A hallmark feature of this micro-sized pedal is its long sustain, and an “electric sizzle” as your signal fades (especially prominent in the “down” position). The single Master Volume knob has PLENTY of gain on tap, and powering Renegade at up to 18 volts can deliver even more headroom and clarity.
- Full-bodied, INTENSE fuzz
- Multiple bias modes
- Miniature Form Factor
- 9-18V operation
- Mechanical true-bypass switching
Gravity Bomb V2 Clean Boost & Mids Enhancer | CopperSound Pedals
This one goes to Eleven! Gravity Bomb V2 picks up where the original left off; delivering up to 20dB of clean boost over the sweep of its volume pot, similarly powered by an audiophile-grade Burr Brown Op Amp. With the addition of our Mid-enhance toggle, V2 allows the player to further dial in their boosted tone, by selecting from three different mid-range types. The center position - just like Gravity Bomb V1 - maintains a flat and neutral EQ curve. In the down position, V2 boosts Mids at 750Hz, while the up position boosts at 1kHz, making Gravity Bomb V2 a great tool to pair with other pedals to give them a fresh tone and feel. Powering Gravity Bomb at up to 18 volts can deliver even more headroom and clarity.
- 20dB of clean volume boost
- Audiophile-grade Op-amp
- Toggle switch for selecting three different mid-range types
- 9-18V operation
- Miniature form factor
- Mechanical true-bypass switching
- CopperSound Launches the Strategy V2 - Premier Guitar ›
- Quick Hit: Coppersound Telegraph Stutter Review - Premier Guitar ›
- Coppersound Loma Prieta Review - Premier Guitar ›
Trey Anastasio unveils plans for a special solo acoustic run starting in March, 2025.
The tour gets underway March 8, 2025 at Springfield, MA’s Symphony Hall and then visits US theatres and concert halls through early April. Real-time presales begin Wednesday, December 4 exclusively via treytickets.shop.ticketstoday.com. All remaining tickets will go on sale to the general public on Friday, December 6 – please check venues for on-sale times. For complete details, please see trey.com/tour.
TREY ANASTASIO - SOLO ACOUSTIC TOUR 2025
MARCH
8 – Springfield, MA – Symphony Hall
9 – Boston, MA – Wang Theatre at Boch Center
11 – Wilkes-Barre, PA – The F.M. Kirby Center
12 - Rochester, NY - Kodak Hall at Eastman Theatre
14 – Columbus, OH – Mershon Auditorium
15 – Milwaukee, WI – Riverside Theater
16 – Nashville, IN – Brown County Music Center
18 – Chicago, IL – Orchestra Hall
19 – Kansas City, MO – Uptown Theatre
21 – New Orleans, LA – Saenger Theatre
22 – Birmingham, AL – Alabama Theatre
23 – Nashville, TN – Ryman Auditorium
26 – Orlando, FL – Walt Disney Theater at Dr. Phillips Center for the Performing Arts
28 – Clearwater, FL – Ruth Eckerd Hall
29 – Savannah, GA – Johnny Mercer Theatre
30 – Charleston, SC – Gaillard Auditorium
APRIL
1 – Knoxville, TN – Tennessee Theatre
2 – Greenville, SC - Peace Concert Hall
4 – Washington, DC – Warner Theatre
5 - Red Bank, NJ - Count Basie Center for the Arts
More info: TREY.COM.
Watch John Bohlinger and Fender’s mad scientists dissect and rip away at Jack White’s new trio of visionary, eclectic, and multi-dimensionally magical electric, amp, and acoustic-electric.
Fender Jack White Triplecaster Telecaster Electric Guitar - Black
Jack White Triplecaster, BlkFender Limited-edition Jack White Triplesonic Acoustasonic Telecaster - Blacktop Arctic White
Jack White Am Acous Tele LTD, Satin ArMade in close collaboration and with significant input from Jimmy Page, the Jimmy Page EDS-1275 uses new 3D scanning technology to aid in handcrafting an effective clone of his original EDS-1275.
There are very few guitars that can claim to be as instantly recognizable and iconic as Jimmy Page’s 1969 EDS-1275 Doubleneck. The photos of him playing it on stage with Led Zeppelin are indelible to rock ’n’ roll history. While Gibson has been making doubleneck electric guitars since 1958, Jimmy was the player who defined the EDS-1275 from the day it was delivered to him. Introducing the Jimmy Page EDS-1275 Doubleneck VOS, now part of the Gibson Custom core lineup and built to the exact specifications of Jimmy’s iconic EDS-1275 Doubleneck.
The Jimmy Page EDS-1275 features a double-cutaway one-piece mahogany body that provides exceptional access to the full length of both the12-string and six-string mahogany necks. Both necks have long tenons and are hide glue fit, and the neck profiles are recreated from 3D scans of the necks on the original guitar. The necks are both capped with bound Indian rosewood fretboards. Each fretboard is equipped with 20 authentic medium jumbo frets and adorned with aged cellulose nitrate parallelogram inlays. The fretboards of both necks have a 12” radius, which is perfect for both playing chords as well as for string bending while soloing. The 18 tuners are Kluson double line, double ring style, just like those found on the original guitar, and even the headstocks feature the correct 17-degree angle and specific logo stylization found on Jimmy’s EDS-1275. The electronics are just as authentic and deliver all of the sonic character of Jimmy’s legendary EDS-1275. Two uncovered Jimmy Page EDS-1275 Custombuckers with double black bobbins and Alnico 5 magnets are used for the two six-string pickups, while a covered pair is installed on the 12-string neck. Of course, the two volume and two tone controls use CTS potentiometers and period-correct ceramic disc capacitors, and the pickup select switch, neck select switch, and output jack are all from Switchcraft.
Here is your opportunity to own a clone of Jimmy Page’s famous EDS-1275, identical to how it appeared on the day that Jimmy first received the guitar. A Gibson Custom hardshell case is included, along with a vintage leather strap, and a certificate of authenticity with a photo from famed photographer Barrie Wentzell.
Jimmy Page EDS-1275 Doubleneck VOS '69 Cherry
Recreation of the EDS-1275 used by Jimmy Page made using 3D scans of the original guitar, one piece mahogany body, mahogany six and 12-string necks with custom Jimmy Page profiles, Indian rosewood fretboards, Jimmy Page Custombucker pickups with Alnico 5 magnets and double black bobbins, Gibson Custom hardshell case
Reader: Daniel Switkin
Hometown: Oakland, California
Guitar: Doublecaster
Here’s the doubleneck dream realized, even if it weighs 9 pounds, 5 ounces.
Taking a Squier Affinity Stratocaster and Mini Precision Bass, one reader created a super-versatile instrument for looping that he can pick, pluck, tap, and slap.
I've been using a multitrack looper with a guitar and an octave pedal, which was okay for simple bass parts, but didn’t give me thick strings and I couldn’t slap with it. So I decided to build a double-neck prototype specifically for looping, with a 6-string guitar and a 4-string bass.
Since building the necks would be the hardest part, I looked around for instruments with bolt-on necks I could reuse. Squier makes an Affinity Stratocaster and a Mini Precision Bass which were affordable and had matching fretboards, so I bought those. It was also cheaper to reuse the electronics and hardware that came with them, rather than buying everything separately.
Using two precut instrument bodies saved the burden of having to route cavities for the electronics.
My plan was to design my own body from scratch. As I debated which neck should go on top, how far apart they should be, and whether to line up the nuts or the saddles, I realized there was actually enough wood there to make a double neck body, which saved me the work of recreating the neck pockets, etc. Putting the guitar on top made barre chords much more comfortable, and the 28.6" bass scale meant I could still reach the first fret easily.
After stripping the paint with a heat gun, I ran both bodies through a table saw, glued them together, and thinned them to 1 3/8". Then I created an offset body shape, a new arm bevel, and reshaped the three cutaways. The pickguards are both original, with the guitar side cut down to make a yin and yang shape. The controls are volume and tone for each neck, using the original knobs. I moved the jack to the back and upgraded it to stereo so the guitar and bass signals can run through separate effects chains.
Note the location of the jack on the back of the extended-shape body. It’s unconventional but practical.
My top concerns were weight and ergonomics. Many doublenecks are around 12 to 13 pounds and 18" wide. I knew I would never play something that big, no matter how good it sounded. To that end, I saved weight everywhere and tracked everything to the gram in a spreadsheet. (That’s also the reason I chose a fixed bridge instead of a vibrato.) I ultimately used a wipe-on gel stain to keep the weight down further. Stripping the paint from the factory saved 5 ounces! The final playable weight is 9 pounds, 5 ounces, and 15 1/4" wide at the lower bout. This has been pretty manageable, however, there is some neck dive because of the tuners. I’m taking everything I’ve learned from this prototype and designing a new doubleneck, which will be headless. I believe I can shed another pound and eliminate the neck dive that way. You can watch my entire build on YouTube.