Another eye-popping gallery of pedalboards, submitted by PG readers.
When playing with is band De-illumination in Dhaka, Bangladesh, Sazzad Arefeen plugs into a TC Electronic PolyTune, which goes to a Boss NS-2 Noise Suppressor and then into his 2-channel Carl Martin Octa-Switch. The Octa-Switch’s first channel is programmed as follows:
1 - MXR Zakk Wylde Phase
2 - MXR Super Comp Compressor
3 - Ibanez TS9DX Turbo Tube Screamer
4 - Wampler Triple Wreck Distortion
5 - Fulltone Catalyst boost/OD
6 - Boss NS-2 send on Octa-Switch input, Octa-Switch send on Boss NS-2 return, Boss NS-2 send on Octa-Switch return.
7 - MXR Zakk Wylde Black Label Chorus
8 - T-Rex Reptile 2 Delay
The Octa-Switch’s second output runs through an MXR 6-Band Graphic EQ and TC Electronic Hall of Fame Reverb before hitting the amp. Everything is mounted on a Pedaltrain Pro and powered by a Decibel Eleven Hot Stone. “It was pretty hard to make this board from Bangladesh,” writes Arefeen. “It took me almost two years.”
Checking out the pedalboards of our fellow players never gets old—and there’s so much creativity on display in this latest batch.You’ll encounter classic effects deployed in imaginative ways … ambitious switching/effect loop schemes … and a vast menagerie of hip boutique boxes. Thanks for the ongoing inspiration, readers!
Looking for more great gear for the guitar player in your life (yourself included!)? Check out this year's Holiday Gear Finds!
Gibson Les Paul Standard 50s Faded
SE Standard 24-08
Kaepo
MONO FlyBy Ultra Backpack
JBL 3 Series Studio Monitors
Guitar Tech Screwdriver Set
Xvive U2, U3 and U4 Wireless Systems
Elixir® Strings Acoustic Phosphor Bronze with NANOWEB® Coating
Elephant Foot Risers and Frames
D'Addario XPND Pedalboard
Cloudlifter CL-1
Caparison Horus-WB-FX MF
The Woman Tone
Templo Devices Holiday Specials
Taylors Guitars GS Mini
DR-05X Stereo Handheld Recorder
Sennheiser MD 421
Jaclyn Slimm
EARTHBOARD Pedalboard
Nobels ODR-1(bc)
Orangewood Guitars Oliver Jr.
Marshall CODE 50 Digital Combo Amp
Line 6 Catalyst 100
LR Baggs Venue DI
Kali Audio LP-6 V2
Eventide H90 Harmonizer®
Wilkinson R Series Trev Wilkinson Signature Pickups
Hercules Stands Five-Piece Guitar Rack with Two Free Expansion Packs
ISP Hum Extractor Pedal
LAVA ME 3
Wampler Metaverse
Gator Cases Transit Guitar Gig Bags
Fralin'Tron
DeLoach Guitars DL-225
Wampler Pedals Ratsbane
Created in collaboration with legendary guitarist George Lynch of Dokken and Lynch Mob fame, the Mr.Scary Mod adds an adjustable tube gain stage and an onboard Deep control, which together are designed to enable an amp to have increased sustain while still retaining note definition and dynamics.
LegendaryTones, LLC today announced production availability of its new Mr. Scary Mod, a 100% pure tube module designed to instantly and easily expand the capabilities of many classic amplifiers with additional gain and tone shaping. Created in collaboration with legendary guitarist George Lynch of Dokken and Lynch Mob fame, the Mr.Scary Mod adds an adjustable tube gain stage and an onboard Deep control, which together are designed to enable an amp to have increased sustain while still retaining note definition and dynamics.
Originally released as the Lynch Mod in February 2021, the updated Mr. Scary Mod features the same core circuit as the Lynch Mod but is now equipped with a revised tube mix combo per George’s preference as well as a facelift in a newly redesigned electro-galvanized steel enclosure. As with the Lynch Mod, each run will be limited and the first run in Pumpkin Orange with Black hardware is limited to just 150 pieces worldwide.
The Mr. Scary Mod adds an adjustable tube gain stage on top of the cathode follower position, keeping note definition and articulation while further increasing sustain. Each Mr. Scary mod is meticulously built by hand in the USA, one at a time, and tuned using high-grade components. Equipped with a single ECC81 (12AT7) in the first position and ECC83 (12AX7) in the second, the Mr. Scary Mod can clean up beautifully when rolling down your guitar’s volume, and still adds scorching gain when you roll it back up. This is a gain stage that’s been tuned and approved by the ears of the maestro George Lynch himself.
“The Mr. Scary Mod excels with dynamics and is incredibly touch-responsive, allowing me to shift from playing clear, lightly compressed cleans to full-out aggressive sustain and distortion –and control it all simply by varying my guitar’s volume control and picking,” said GeorgeLynch. “In many ways, it’s an old-school approach, but it’s also so much more natural and expressive in addition to being musically fulfilling when you can play both the guitar and amp dynamically together this way.”
The Mr. Scary Mod installs in minutes, is safe and effective to use, and requires no special tools or re-biasing of the amplifier. Simply insert the module into the cathode follower preamp position of compatible amplifiers (includes Marshall 2203/2204/1959/1987 circuits) and
immediately get the benefit of enjoying a hot-rodded amp that delivers all the pure harmonic character that comes with an added pure tube gain stage. The handmade in the USA Mr. Scary Mod is now available to order for $319.
For more information, please visit legendarytones.com.
October Audio has miniaturized their NVMBR Gain pedal to create two mini versions of this beautifully organic-sounding circuit – including an always-on gain device.
The NVMBR Gain is a nonlinear amp that transitions gracefully from clean boost to overdriven tones. Volume increases from just over unity to about 10db before soft-clipping drive appears for another 5db of boost. Its extraordinary ease of use is matched by outstanding versatility: you can use it as a clean boost, push a stubborn amp into overdrive or create a just-breaking-up sound at any amp volume.
October Audio’s new family of mini NVMBR Gain pedals includes a switchable version that allows you to bypass the effect: one option features brand logo pedal graphics, while the other sports a fun “Witch Finger” graphic with a Davies knob as the“fingernail”.
The second version in the new lineup is an always-on device featuring the Witch Finger graphic and Davies knob, with the same NVMBR Gain circuit that lies at the core of the switchable version.
Features:
- Knob controls gain and clipping simultaneously
- Stunning silver hammertone finish
- Switchable versions are true-bypass, available with classic or witch finger graphics
- Authentic Davies knobs, including the “fingernail”
- 9V center negative power supply required
- Dimensions: 3.63 x 1.50 x 1.88 in
Witch Finger (always on NVMBR Gain) demo
All October Audio pedals are assembled in Richmond, VA, and available for purchase directly through the online shop. Street price is $109 for NVMBR Gain footswitch versions and $89 for the always-on device.
For more information, please visit octoberaudio.com.