The Dickey Betts-Style Spank of John Osborne’s “Stay a Little Longer” Solo
John Osborne goes deep on scales, finding his guitar voice, and the spanky solo for “Stay A Little Longer.”
“I think it’s safe to say John Osborne is a fuckin’ beast!”
That’s how Chris Shiflett kicks off this episode of Shred With Shifty, featuring bearded Brothers Osborne shredder-in-chief John Osborne. Osborne joins Shifty to dissect his blistering country-rock ripping on the band’s breakout single, “Stay A Little Longer.”
Osborne tells Shifty about failing miserably at guitar in college, where he learned to read and play bass clef but never got the hang of the treble clef. It’s no surprise when Osborne admits he’s taken notes from players like Stevie Ray Vaughan, Dickey Betts, Eric Johnson, and Skynyrd shredders Allan Collins and Gary Rossington, but his very first guitar influence? Kurt Cobain, and the Nirvana frontman’s anxious energy. “I’m a little bit awkward, and I have social anxiety, but I can talk to people through music,” says Osborne. As far as technicality, though, he and Shifty agree that bluegrass guitar playing is “the Usain Bolt of musicianship.”
To recap the “Stay A Little Longer” leads, Osborne plays a stock blackguard 1953 Fender Telecaster that he scooped from Carter Vintage Guitars. (Listen in to learn why it and some other Fenders from that era have an abnormally thick “Friday neck.”) He explains that he wanted the solo to have the same philosophy as legendary solos like those in “Free Bird” and “Hotel California”: hooky, repetitive, accented, and not too shreddy. Plus, he reveals the “un-Photoshopped” blips in the solo that stayed on the record.
Credits
Producer: Jason Shadrick
Executive Producers: Brady Sadler and Jake Brennan for Double Elvis
Engineering Support by Matt Tahaney and Matt Beaudion
Video Editors: Dan Destefano and Addison Sauvan
Special thanks to Chris Peterson, Greg Nacron, and the entire Volume.com crew.
A forward-thinking, inventive, high-quality electro-acoustic design yields balance, playability, and performance flexibility.
High-quality construction. Flexible, responsive, and detailed-sounding pickup/mic system. Lots of bass resonance without feedback or mud.
Handsome, understated design may still estrange traditionalists.
$1,599
L.R. Baggs AEG-1
lrbaggs.com
Though acoustic amplification has improved by leaps, bounds, and light years, the challenges of making a flattop loud remain … challenging. L.R. Baggs has played no small part in improving the state of acoustic amplification, primarily via ultra-reliable pickups like the Anthem, Lyric, andHiFi Duet microphone and microphone/under-saddle systems, the overachieving, inexpensive Element Active System, and theM1 andM80 magnetic soundhole pickups—all of which have become industry standards to one degree or another.
Lloyd Baggs got his start building guitars for the likes of Jackson Brown, Ry Cooder, Janis Ian, and Graham Nash. So he can tell you that building a good guitar from the ground up is no mean feat. Enter the AEG-1, L.R. Baggs’ first flattop—a unique thin-hollowbody design that leverages the company’s copious experience with transducers of every kind to create a successful, holistically functional instrument. In some ways, it feels like an instrument built to match a great pickup system—a cool way to consider guitar design if you think about it.
Gentle Deconstruction
Admittedly, I’m a flattop design traditionalist—that jerk that thinks any acoustic sketched out after 1962 looks a bit yucky. So, the AEG-1’s looks were a bit jarring out of the case. That didn’t last. Though it’s very shallow and soft curves sometimes evoked a swimming pool outline, that of a nice Scandinavian coffee table, and Gibson’s L6-S (these are highly positive associations in my opinion), the lovely body contours and shallow cutaway have a slimming effect and give the guitar a sense of forward lean at the aft end—almost like a sprinkle of Fender Jaguar. The more you stare at it, the more it looks like a very artful deconstruction of a dreadnought shape, and a very natural one at that.
The construction itself is unique, too. The sides are CDC-machined poplar ply, oriented so you see the laminate in cross-section. The top is a very pretty torrefied Sitka spruce, which is braced in a traditional scalloped X pattern. The sides are also braced with arms that radiate toward the waist and heel at 120 degrees from each other, reinforcing the soundhole and the substantial neck heel. The back is critical to the AEG-1’s tone makeup, too. Rather than a merely ornamental bit of plywood, it’s a lovely Indian rosewood that vibrates freely, enhancing resonance and the many organic facets of the AEG-1’s tone spectrum.
The 25.625"-scale mahogany neck is mated to the body by way of four substantial bolts and an equally substantial contoured heel and heel block. Sturdy, perhaps, undersells the secure feel of the neck/body union. In hand, the slim-C neck is lovely, too. The bound rosewood fretboard is beautiful, and the playability is fantastic as well. The action is snappy and fast, the 1.7" nut width is comfy and spacious. And, in general, the build quality of the Korea-made AEG-1 is excellent.
Resonant With Room To Roam
With the exception of country blues players—and guitarists like Blake Mills andMadison Cunningham, who dabble in rubber bridges to prioritize focus over breadth—most 6-stringers want a lot of resonance from their instruments. The AEG-1 resonates beautifully, particularly for a thin-bodied guitar. And the HiFi Duet, made up of the HiFi bridge plate pickup and the company’s Silo microphone, is deep and detailed, so the output is easily reshaped by the flexible volume, tone, and mic/pickup blend controls. But the balance of the constituent parts, and the deft way with which the design sacrifices a little body resonance for string detail, is smart and satisfying to interact with.
This is especially true when you use blend settings that favor the microphone. If you get the tone control on the AEG-1, and your amp, dialed in right (I used a mid-scoop and slight bump in the treble and bass from a Taylor Circa74), the extra bass resonance is warm but without being overbearing, adding mass to tones without slathering them in mud. But you don’t have to get too precious and precise about such settings to make the guitar sound great. Working together, the HiFi Duet’s pickup/mic blend and tone controls provide the range and variation to shift bass emphasis or put sparkle to the fore. This range is helped in no small part by the guitar’s basic feedback resistance. I spent a fair bit of this evaluation playing loud, plugged into the Circa74, which was tilted toward my head at a 30-degree angle. Only when I bent down to turn the amp off, situating the guitar about a foot-and-a-half from the speaker, did the AEG-1 start to feed back.
The Verdict
Inventive, attractive in form and function, playable, and above all forgiving, full-sounding, and balanced when amplified, the AEG-1 is an unexpected treat. The HiFi Duet pickup-and-microphone system is a star. But rather than feeling like an afterthought, it feels like an integral part of the whole. And it’s the cohesiveness of this design—and the wholeness of the many sounds it creates—that makes the AEG-1 different from many stage-oriented electro-acoustic guitars
Want the world to know about your pedalboard? Got a great story to tell about it? Fill out the form below for your shot at being in Premier Guitar's March issue! Not everyone will be used, so be sure to say why your pedalboard stands out. And be sure to include good hi-res photos of your board!
Submit your pedalboard below!
Here are a few tips to get you started on your way to becoming an old-school Fender amp tech.
Back in 1995, when my journey with vintage Fender amps started, I knew little about tube amps. Over 30 years, I’ve gradually learned the hard way how to acquire, play, service, and give advice. If tube amps are to become a hobby for you, I recommend learning some basic maintenance. You’ll be better off in terms of time and money, and even more important, the knowledge about how circuits and components affect tone will give you a wider array of sounds to play with. But where should you start?
Here’s my list of relevant topics that you should be able to master with a little patience and curiosity. My goal is to get you started on your journey to becoming a Fender amp handyman. The topics are sorted by gravity, and you’ll need in-depth studies from reliable sources on each topic. On my website, fenderguru.com, I’ve tried to explain things easily for musicians, but there are many other good Fender amp resources out there.
Safety. First and foremost: There are lethal voltages inside tube amps, much higher than in transistor amps—even after powering some of them off. Learn how to discharge DC voltages before opening an amp. In my website’s buyer’s guide to vintage Fender amps, I have laid out a procedure on how to safely power off and power up these amps by inserting tubes in a specific order.
Speakers. I strongly recommend learning impedance and wiring methods and experimenting with various internal speakers and cabinets. The mathematical formula 1/Rt = 1/R1 + 1/R2 calculates the total impedance for two speakers coupled in parallel; Rt is the total impedance, and R1 and R2 are the impedances of the two speakers. Remember that all Fender amps can tolerate an impedance mismatch from -50 percent up to +100 percent.
Pots and jacks. Fixing scratchy pots is a common task for all amp owners and is usually solved by a rotating exercise that freshens up the oxidized metal surfaces inside the pots. If it’s sticky, get yourself a contact cleaner like WD-40 and spray inside the pot.
“When you get more advanced, you can calculate specific bias currents based on measured plate voltages and a specific tube’s dissipation factor.”
Reverb tank. Reverb failure is common and often explained by bad phono cables or plugs. It is easy to learn the mechanics of the reverb tank by simply unplugging everything, changing cables, and opening the reverb tank to look for detached reverb springs and broken soldering joints.
Replacing power tubes and adjusting bias. A power tube requires a correct combination of plate voltage and bias current to operate safely and at full power levels. Since there are different tubes, component drift/variation in caps and resistors, and different voltages in houses and buildings, some tube amps come with an adjustable bias pot.
You need a bias-meter tool to measure bias currents or voltages when replacing power tubes, or diagnosing an amp that lacks clean headroom or has nasty distortion. When you get more advanced, you can calculate specific bias currents based on measured plate voltages and a specific tube’s dissipation factor. Until then, a general rule is to aim for 35 mA for 6L6 amps (except for the Vibrolux, which has a higher bias current at 38 mA) and 22 mA on 6V6 amps. Use your ears, too!
Caps. Old, dried-out electrolytic capacitors should be replaced for both tone and safety’s sake. With a soldering iron, it’s very easy to replace each of the 10 to 11 caps in a black- or silver-panel Fender amp, one by one. Be careful with the polarity, and make sure to drain out all DC voltages (see “Safety,” above).
Preamp tubes. Replacing preamp tubes is easy—no bias adjustment is required. Replacing preamp tubes systematically can solve your problem or help you narrow it down. You then need to learn the function of each preamp tube and which channel they serve. If you want to modify your amp, simple tube swaps can easily change the behavior of your amp, like altering the threshold where your preamp or power amp starts breaking up.
Transformers. I rarely come upon damaged transformers, but sometimes I swap them to get a bigger and firmer bass response, or if I want different speaker impedances. By looking at the soldering job, cutting of isolation, wire lengths, and layout, I can easily spot an amateur’s work. To prevent all kinds of safety, hum, and interference problems, a transformer replacement must be done cleanly and robustly. The risks are high.
Understanding the signal chain. If you have more complex problems that tube replacement doesn’t solve, you must learn how to inspect an amp and isolate problems to various circuit functions. This will require you to learn some circuit theory and schematics. The good news is that since Fender amps are all very similar, once you learn to work on one, you can easily learn to work on them all.Guest picker Billy Doyle of Man/Woman/Chainsaw joins reader Eddie Carter and PGstaff in musing on the joys of playing music.
A: I think the most rewarding aspect of music is the rush and chaos of playing live shows with my friends. I really love the tension—not knowing what’ll go wrong each night and what’ll come together nicely.
Billy’s recent fascination has been with The Last Waltz, both film and accompanying album.
Obsession: This summer I discovered the Band’s The Last Waltz concert film and album and fell into a mini obsession with it. Seeing some of the most stellar songwriters of their era share a stage is really special, not to mention how comfortable as a unit the Band is and how high the standard of musicianship is—Levon Helm singing his heart out while playing the drums is particularly wicked. Joni Mitchell’s performance of “Coyote” and Van Morrison’s rendition of “Caravan” are both particularly special, as I grew up listening to those artists. It’s a great insight to be able to learn these songs exactly how they played them.
Eddie Carter - Reader of the Month
A: The most rewarding aspect of playing for me is when I connect with the audience. The main purpose of playing music live, in my opinion, has always been to take the audience away from everyday life for a while. Life smacks a person down a lot, whether it’s a bad day at work or school, bills you can’t keep up with, bad news, etc. When a person goes to hear live music, they want to forget that and have some fun and unwind. When I see the audience smile, sing along, or dance, I know I’ve managed to help with that. That’s why I enjoy doing cover songs and just mix in an original here or there. It’s also why I try to do a variety of music from several decades.
A recent go-to for Eddie has been Duane Betts’ Wild & Precious Life.
Obsession: I guess my current obsession is looping. I don’t plan to get into looping as deep as Phil Keaggy, or use drums and keyboards. I do enjoy stacking parts on guitar and even playing mandolin over a guitar loop, though. It helps with making a song sound more like the recorded version. I also use a looper, a Boss RC-500, to store and make backing tracks for a few songs.
Jon Levy - Publisher
For Jon, Pretenders’ self-titled never gets old.
A: Playing music has enriched my life in so many ways, it’s hard to pick the most important one. Is it the headrush from writing and recording? The thrill of live gigs? The champagne-soaked limousine rides with supermodels and celebrity fans? (Just kidding about that last one.) To be honest, it’s the deep friendship and goofy camaraderie with my bandmates. My entire social life is based on music, and it makes the backaches, hangovers, and tinnitus totally worth it.
Nashville-based singer-songwriter Stephen Wilson Jr. is in Jon’s current rotation.
Obsession: Not looking at my hands when I’m playing. It forces me to concentrate on what I’m hearing and feeling—stuff that’s actually musical, rather than visual. I still ogle the fretboard a bunch, but I’m consciously trying to rely on my other senses as much as possible.
Brett Petrusek - Director of Advertising
Brett’s a big fan of Iron Maiden’s Killers, but also loves Miles Davis’ timeless Kind of Blue.
A: All of it. There are so many seasons and the change of the seasons is what makes it so great. Hitting the perfect riff to inspire a new song. Recording: layering guitars and vocals, hearing the tracks build up and turn into a mix (I really love this part). Creating a body of work. Being on stage with your band and feeling the roar of your guitar through the PA. Connecting with an audience, or better yet, knowing a single person connected with your music in a meaningful way. Watching my team develop and get better at the game. I feel fortunate just to be able to do it and to be able to share the experience with my group, Fuzzrd. The single most important thing? It’s unconditionally always there for me—and it alway starts with a guitar.
Irish hard-rocker Gary Moore’s Victims of the Future is a favorite of Brett’s.
Obsession: Taking a page from the legendary Gary Moore’s playbook: “So try and leave some big moments of silence in your solos—at least twice as long as what comes to you instinctively. After a while, you get in the habit of hearing those spaces, and the waiting comes naturally. And if you’ve got a good tone, you’ll create this anticipation where the audience can’t wait for the next note.”