A maze of modulation and reverberations leads down many colorful tone vortices.
Deep clanging reverb tones. Unexpected reverb/modulation combinations.
Steep learning curve for a superficially simple pedal.
$209
SolidGoldFX Ether
solidgoldfx.com
A lot of cruel fates can befall a gig. But unless you’re a complete pedal addict or live in high-gain-only realms, doing a gig with just a reverb- and tremolo-equipped amp is not one of them. Usually a nice splash of reverb makes the lamest tone pretty okay. Add a little tremolo on top and you have to work to not be at least a little funky, surfy, or spacy. You see, reverb and modulation go together like beans and rice. That truth, it seems, extends even to maximalist expressions of that formula—like the SolidGold FX Ether.
The Ether is tricky enough to bewilder if you’re not careful. The three modulation modes—tremolo, harmonic tremolo, and vibrato—all feel, sound, and interact with the reverb differently. An economical but mildly complex control set definitely demands that you put in a little study. And few settings fit neatly into tidy categories like “vintage spring emulation” or “light hall.” But what the Ether lacks in super-intuitive operation it makes up for in surprises and a fluid user experience that can drag a player in new directions.
Deep Thought
For guitarists accustomed to simple pedal reverbs, the Ether will take some work to master. There are just five knobs for tone (color), modulation depth and speed, reverb decay, and a wet/dry mix that functions as the level for both the reverb and modulation. A 2-way toggle switches between the three modulation modes or introduces a shimmer effect. What looks simple on the surface, however, belies great complexity among the available sounds. The modulation depth control alone, for instance, is full of tricks. It controls modulation waveform intensity but can also significantly re-cast the voice and response of the three modulation voices. In addition to intensity, depth also changes the shape of the modulation. On one side of noon the pedal generates sawtooth waves; on the other side, softer sine waves. Somewhat counterintuitively, waveform depth is most intense at clockwise and counterclockwise extremes and least intense closest to noon. Additionally, the noon position is a quasi-random waveform in vibrato mode, a square wave in tremolo mode, and a flutter triangle wave in harmonic triangle mode. So, while it’s fun to twist knobs at random to see what you can conjure, getting some semblance of control over the sonic outcome takes paying close attention to how these variables relate to each other.
There are cool, subtle sounds in Ether, even if subtle isn’t exactly a specialty.
The knobs are sensitive, too. This is great for fine-tuning settings when you have an intuitive, muscle-memory-based handle on how the controls work. But they can feel twitchy at first. Nowhere is this more apparent than in reverb decay and level. They each have considerable range. But the lowest level and decay settings primarily yield big reverb sounds. There are cool subtle sounds in the Ether, even if subtle isn’t exactly a specialty. On the mellower side of the Ether’s envelope, I dialed in a reasonable-enough facsimile of an old Fender black-panel spring reverb set to noon, as well as some really cool tile-like, fast-reflection sounds. But the differences between them on the level and decay controls were small and it can be hard to nail in-between sounds reliably. If you largely live your reverb life on the subdued side of splashy, you might want to look elsewhere.
The Ether’s controls are expansive on the modulation side as well. But each modulation mode also moves through very different ranges of intensity. Vibrato modulation, for instance, sounds very intense at high depth settings in relatively dry mixes. Harmonic tremolo voices, however, need a much wetter signal to stand out prominently. Regular tremolo settings tend to require high effect levels (which means you need to mind your reverb decay settings as well). Again, these differences make practice key. But relinquishing control can be just as satisfying. The harmonic tremolo reverbs can span phasey washes and noirish throb. Standard tremolo, while not the most radical effect, provides fast-twitching or hypnotic icing to metallic hyper-springy surf-ish settings. Vibrato’s reverb settings, meanwhile, can range from surreal, robotic modulations to sweet near-rotary sounds. Finding the points where these sounds intersect and mingle is a joy if you have the time to spare.
The Verdict
Apart from the Ether’s lack of low-key, conventional reverb sounds and interactive, trickier-than-it-looks controls, it’s hard to not fall under the device’s spell. If you have time to kill, getting lost in the mega-expansive controls, many combinations of modulation textures, and fields of reverb-based overtones can create pure joy. If you’re inclined toward option fatigue or dread getting lost in quirky controls onstage, there are simpler ways to get your reverb fix. But if it’s big-to-bigger spaces you’re after and the ability to render them distinct, mutant, and wild with washes of tremolo, vibrato, and phasey textures, the Ether is an almost endless amusement park of clanging, bouncing, ringing, and resplendent modulations.
Looking for doom in all the wrong places? This meticulous recreation of the preamp from a rare ’80s amp is explosively effective.
Destructive amounts of volume, gain, and low end. Wall-of-amps doom in a box.
Somewhat confusing control labels and layout. EQ boosts can be subtle. You’ll probably want a noise gate.
$250
Frost Giant Architect of Reality
fuzzworship.com
If doom metal and its variants are big blips on your radar, you’ve probably noticed there’s a dearth of all-in-one stompboxes capable of unleashing genre-worthy filth and mayhem. A Big Muff (or any number of other fuzzes) and a distortion or two will take you a long way, but for dedicated doomers the aural onslaught usually isn’t just about cascading gain—it’s watts and decibels wreaking havoc on speaker cones. Which is why powerful heads (often 120- or 200-watt bass or PA models) from the likes of Sunn, Ampeg, Peavey, Orange, Hiwatt, Sound City, and Marshall largely rule the realm.
Another highly acclaimed amp for the task is Laney’s Advanced Overdrive Response series from the early ’80s, particularly the 50- and 100-watt Pro-Tube Lead heads, which had a handwired architecture much like a Marshall JMP circuit, only with an extra gain stage and a slightly darker sound. Influential doom/stoner/sludge bands who embraced AORs include Sleep, High on Fire, the Sword, and Electric Wizard. Of course, Laney’s doom cred goes much further back than that: Their most famous endorsee, Tony Iommi, is the veritable well from whence doom’s many tributaries spring—particularly his early Sabbath work, which was powered by Laney LA100 BL heads.
Frost Giant Architect Of Reality Review by premierguitar
- 0:00-0:16: Neck pickup with Architect bypassed.
- 0:16-0:39: Architect activated (red side only) with presence and bass at 3 o’clock, mids at 9 o’clock, treble at noon, bass and treble boosts engaged, master volume at 9:30, and preamp gain at 7:30
- 0:39-1:16: AOR (green side) engaged with AOR volume at just over 9 o’clock and AOR gain at max.
- 1:16-1:38: Bridge pickup into red side with presence at minimum, bass at max (and boosted), mids at noon (unboosted), treble at minimum (unboosted), master volume at 9:30, and preamp gain at noon.
- 1:38-2:08: AOR engaged with AOR volume at 10 o’clock and AOR gain at max.
But for Eric Calvert, head of Texas-based Frost Giant Electronics, AORs are where it’s at. In fact, his goal since founding Frost Giant has been to recreate the preamp in his own beloved AOR head from 1985. Now, with the help of Nick Williams (of Dunwich Amplification fame), Calvert’s dream has finally been realized with the Architect of Reality—a powerful homage to both Laney and, presumably, Sabbath’s 1971 sonic milestone, Master of Reality.
The Persistence of Realities
The Architect puts essentially every control from the front panel of an 8-knob AOR atop a medium-sized stompbox that’s billed as a “2-channel” design. But it’s more accurate to describe it as a massively powerful, wide-ranging distortion (right-side footswitch) with a cascading-gain feature (“AOR channel” footswitch) that can be layered over the base tone.
To help achieve its bludgeoning ends, the JFET-driven Architect converts 9V of AC power to a whopping 36V (battery power is not an option). The EQ—bass, mids, and treble knobs, corresponding boost toggles, and a presence (“pre”) knob—runs along the top row, but I found it peculiar that the master volume and preamp gain for the base tone (the “red channel”) are sandwiched between AOR (“green channel”) volume and gain knobs. The layout would feel more logical and intuitive—and therefore faster and easier to use—if AOR volume and gain were side-by-side above the AOR footswitch.
It’s capable of myriad metal flavors, but its real calling card is sheer might.
Speaker Bloody Speaker
To put the Architect’s intriguing ambitions to the test, I used a Les Paul, an Eastwood Sidejack baritone, and a Schecter Ultra III through a few different setups: a Revv G20 powering a Bogner closed-back 2x12, a Jaguar HC50 1x12, a silver-panel Fender Vibrolux Reverb paired with a Fender Rumble 200 1x15 bass amp, and a Sound City SC30 also paired with the Rumble. From the outset, the Architect’s massive volume and gain capabilities were apparent. The red side’s hot-rodded-Marshall-like preamp yields everything from toothsome gain excellent for old-school metal to blistering thrash at max. Meanwhile, the red side’s master volume is astonishingly loud—when I wasn’t using a bass amp (which allowed me to turn the guitar amp’s bass down), I began fearing for my speakers’ wellbeing when volume merely approached the noon mark.
But wide-ranging gain wouldn’t mean much if the EQ weren’t wisely focused. No matter where I dialed the treble, mids, and presence, tones never crossed over into abominable thinness. The bass control feels tight and muscular throughout its range, though it doesn’t seem particularly corpulent when maxed in red mode alone. But kick on the green side and it sounds absolutely explosive at all but the most conservative AOR settings. As with red mode, the AOR volume will likely sound like it’s clobbering your amp halfway through its range, even if the base channel’s volume is set pretty low. One couldn’t be blamed for using the green side to simulate pushing or literally push speaker cabs to their limits without looking back, but AOR mode is also capable of practical precision and subtle restraint—say, thickening things a smidge or adding razor sharpness to the core sound.
The Verdict
If you’re after droning, foundation-rattling gain and are sick of using multiple stompboxes and/or backbreaking stacks, you’ll find a lot to love in Frost Giant’s Architect of Reality. It’s capable of myriad metal flavors, but its real calling card is sheer might that occupies the mythical space between distortion and fuzz, where feral howls smudge together and destruction and chaos feel like real propositions. For extreme sounds—especially if you’re not miking your amp—it’s probably advisable to pair the Architect with a robust, high-wattage/high-headroom amp, if not also one of the many light, dependable bass amps on the market. But that’s a much more doable proposition than scouring the internet for rare, heavy-ass old stacks that keep going up in price.
It’s the ’80s in a box—just add hair spray.
A portable, user-friendly path to tri-stereo chorus sounds. Presets make it easy to find ’80s guitar tones. Good analog BBD-style chorus tones. Sensitive controls allow for refined tweaking.
Dual-control knobs make it difficult to visualize settings.
$299
Eventide TriceraChorus
eventideaudio.com
The 1980s were a decade of big hair, big amps, and big guitar tones. But while those stacks of cabinets certainly made things louder, behind-the-scenes rackmount chorus and in particular, the tri-stereo chorus units available under various names such as Dyno-My-Piano, Dynotronics, and Songbird, did a lot to make ’80s guitar sound bigger still. Once these rackmount units reached the rigs of guitarists such as Michael Landau and Steve Lukather, pop radio didn’t stand a chance.
After a period of relentless ubiquity, heavily chorused guitar tones went the way of Aqua Net. But chorus made a comeback, and even rare rackmount versions of the effect have been distilled into pedal form. Eventide does a swell job cramming complicated effects into compact stomps. This time around, they’ve fit the giant tones and deep functionality of rackmount tri-stereo chorus into the pedalboard-friendly TriceraChorus.
Eventide TriceraChorus Review by premierguitar
- Neck pickup, chorus mode, rate at 10 o’clock, detune at 10 o’clock, chorus levels at noon
- Same settings in swirl mode
- Neck pickup, swirl on, vibrato mode, rate at 3 o’clock/rate envelope cranked, detune at 3 o/clock, pitch at 11 o’clock
- Rhythm on bridge/middle, chorale mode, rate noon, detune noon, all three levels at 2 o’clock. Lead with same setting but with Klon KTR
- Same settings on bridge/middle, delay knob cranked (clean)
- Same settings but with Klon KTR
Is Three Better Than One?
Anyone who’s ever used a stereo chorus effect knows the depth and dimension it can add to a guitar tone. A tri-stereo chorus takes that idea and runs with it—creating three separate chorus signals and placing them across the stereo field—left, center, and right. The result is just as vast as you’d hope, evoking big-stadium vibes even with a pair of small combos.
Like the other pedals in Eventide's dot9 series, the TriceraChorus' dual-function knobs offer a wide range of control. On the TriceraChorus, users can use them to choose between three effect modes (chorus, vibrato, and chorale), tweak rate/rate envelope, detune amount and pitch, left/center/right levels, delay time, and filter settings. The complex nature of the pedal’s capabilities means specific settings are easy to forget, and first-time users face a bit of a learning curve. But the five factory presets are good jumping-off points for exploring possible extremes. And with the option to create 127 presets of your own you can create and recall many simple or radical formulas to suit your musical moment.
By cranking up the rate and detune past noon and playing around with a little micro-pitch shifting to taste, it was easy to evoke the Mike Stern-playing-with-Miles tones of my dreams.
Tracing The History of Chorus
In some ways, the TriceraChorus enables users to be tone archeologists and trace the history of the chorus effect to its early days. At its simplest settings, the TriceraChorus offers bucket brigade-inspired tones that evoke the sound of those ’70s stomps. And in chorus mode, with the rate at slow-to-moderate settings and the detune below noonish, the pedal offers warm gooey delights. Kick on the swirl switch and you unlock even warmer phase- and flange-style modulation. If it’s subtle sounds you seek, dialing back one or two of the three chorus level settings offers more vintage-variety sounds. On the other side of the coin, keeping the swirl engaged and switching into vibrato mode at high rate and detune settings creates worlds of weirdness.
When it’s time to lean into ’80s vibes, you’ll want all three chorus levels to be audible. I found the most hi-fi tones in chorale mode with the swirl function off. Here, tight, single-note riffs and leads sing, especially with a touch of overdrive in front of the pedal. By cranking up the rate and detune past noon and adding a little micro-pitch shifting to taste, it was easy to evoke the Mike Stern-playing-with-Miles tones of my dreams. Cranking the delay knob can deliver the pedal’s most arena-ready tones and I had a blast faking my way through everything from Alex Lifeson-style suspensions to “Purple Rain.” Whatever the settings, with all three chorus voices activated, the TriceraChorus adds a lush sparkle to clean tones and buffs out the rough edges of distorted tones to create ’80s radio-ready majesty.
The Verdict
Though tri-stereo chorus was immensely popular in its heyday, its potential is still underutilized. And while I’ve never played through a vintage Dynotronics unit to know how close Eventide got to the original vibes, I’ve played through enough chorus pedals to know that the TriceraChorus does something very different. If you want quintessentially ’80s sounds, this pedal will get you there instantly. If that’s not your bag, you might not need all the extra fuss. But this Eventide has plenty of sonic rewards to offer anyone who’s even a little curious about chorus exploration and wants to embiggen their tones.