Premier Guitar features affiliate links to help support our content. We may earn a commission on any affiliated purchases.
Montreal Guitar Show '10 - Thorell Guitars
PG's On Location at the 2010 Montreal Guitar Show where we get to check out Thorell Guitars played by Paul Asbell during one of the Show's mini-concerts.
PG's On Location at the 2010 Montreal Guitar Show where we get to check out Thorell Guitars played by Paul Asbell during one of the Show's mini-concerts.
Experience a sprawling collection of fuzz, delay, and modulation pedals that fuel massive walls of Pscyh-Rock sound. From vintage fuzz faces to boutique builds and custom creations, look back at classic Rig Rundowns from The Flaming Lips, All Them Witches, Elder, King Gizzard & The Lizard Wizard, and more.
The newly launched company BzzzzKill has introduced its debut product: a specially designed coil that drastically reduces hum in Stratocaster-style guitars.
BzzzzKill solves a problem that has plagued Strat players for more than 70 years: single-coil pickup noise. The new BzzzzKill hum reduction device virtually eliminates Stratocaster 60 cycle hum without noticeable tone loss or permanent modifications to your guitar and its pickups.
Unlike other solutions that require pickup replacements, permanent alterations, or external power sources, BzzzzKill employs a meticulously engineered passive dummy coil that installs inside your guitar’s control cavity without drilling.
On most Strat-style guitars, the installation process is straightforward and easily reversible, with no need for batteries, routing, or new pickups. Simply remove your pickguard, place the BzzzzKill coil next to the pickup selector switch, solder its wires to a few existing solder connections, and you'll immediately hear a dramatic Improvement. Single-coil 60 Hz hum is virtually gone and your tone is retained.
BzzzzKill’s design finds the optimum balance between hum reduction and tone preservation. It’s currently available in two models. A Dual Layer model is specifically optimized for Stratocasters with reverse-wound/reverse-polarity (RWRP) middle coils. A Single Layer model is designed for vintage-style SSS (single-single-single) pickup configurations.
The innovative solution operates as a passive device requiring no batteries or maintenance, working in all pickup switch positions and remaining compatible with effects chains. The device maintains the guitar’s original dynamic range and low-end response while virtually eliminating hum at all gain levels except maximum gain settings, where only minimal hum remains.
BzzzzKill is the culmination of decades of research and development by inventor Richard Moreton of RSM Custom Guitar Works. “I created over 200 prototypes in perfecting the BzzzzKill, mostly to solve my own quest for great tone and the ideal combination of hum reduction, and tone preservation,” says Moreton. “What started as a personal mission to get rid of the buzz in my own Strats became an obsession to create something that didn’t exist — one-and-done noise reduction without the compromises other solutions demand.”
Current BzzzzKill models sell for $199 USD for both the Single Layer and Dual Layer configurations. The company plans to expand to Telecaster and other single-coil models in the future. For more information visit www.bzzzzkill.com.
In this video, PG Contributor Tom Butwin breaks down the fundamentals of mic'ing acoustic, electric, and bass guitars. Learn the best microphone placements to capture the perfect tone, whether you're looking for a bright, aggressive sound or a warm, vintage vibe.
The prolific Australian guitarist brought his mastery to east Nashville, where we got a look at the gear he’s trusting overseas.
Adam Miller has been compared to plenty of his most sacred influences—Tommy Emmanuel, Chet Atkins, Charlie Hunter, Bill Frissell—but he’s certainly carved a path of his own. This year alone, he’s released three records and undertook a U.S. tour to bring his delightful mix of jazz, groove, and beyond to eager listeners.
Before his show at the Underdog in east Nashville, Miller took some time to show PG’s Chris Kies around his trusted tools for international touring, including a gorgeous custom Huber electric, a Collings acoustic, and some key items on loan.
Calling a Huber
This custom-built Huber electric, by German luthier Nik Huber, was crafted over the last five years, working in elements of Miller’s previous Huber and several other designs. It has a heavily chambered mahogany back and redwood top, bolt-on maple neck, rosewood fretboard, trapeze tailpiece, and nylon saddles, plus Kloppmann Electrics mini humbuckers and a single 250k volume pot, which rolls off for a jazzy archtop sound. Miller strings it with D’Addario NYXLs (.011–.049s).
Borrowed Bari
Since Miller can’t bring all his favorite instruments on tour, he often borrows guitars from local friends and fans on tour, like this baritone Novo Serus J.
Collings Calling
Miller bought this Collings acoustic at Gladesville Guitar Factory, just outside Sydney, about 10 years ago. He runs it with a Seymour Duncan Wavelength duo pickup system, but swapped out the kit’s undersaddle piece for soundboard transducers and modified “the circuit so they’re at a crossover, so you’re only hearing the bottom end of them and all the top end’s coming from the condenser mic.” He uses D’Addario Nickel Bronze (.012–0.53s) on his acoustic.
Can I Bum a Studio Sig?
Miller has been a Two-Rock devotee since 2007, and on one of his first trips to the U.S., he visited the factory and picked one up. He doesn’t travel with his unit, so he borrowed this one from Nashville legend Cory Congilio. For Miller, an amp is the soundboard for an electric guitar; if he doesn’t have a Two-Rock, he struggles.
Adam Miller’s Pedalboard
Miller’s Collings runs into a Grace Design ALiX preamp, which helps him fine-tune his EQ and level out pickups with varying output when he switches instruments. For reverb, sometimes he’ll tap the Strymon Flint, but often he’ll let the front of house weave it in.
Aside from the ALiX and Flint, Miller relies on a Vemuram Jan Ray, Free the Tone SOV-2 Overdrive, Chase Bliss Mood, and Line 6 DL4 Mk II.
PG contributor Tom Butwin walks us through a rugged, pedal‑board‑friendly delay that lets you shape time, feedback, and blend entirely with your foot. The Roto Echo features warm, gritty analog‑style echoes, intuitive real‑time control, and a design tough enough for full body weight. It sounds great on its own, but this wheel‐driven innovation opens up worlds of expressive possibilities.
Third Man Hardware and Black Mountain are excited to announce the innovative Roto-Echo delay pedal. Instead of tweaking delay parameters with your fingers, the pedal’s Freewheel® Technology allows players to change them with their feet in real-time as they play – a small change that leads to tons of creative possibilities. The Roto-Echo is built tough and players can put their full weight onto the pedal with no problem. It’s the same size as a regular Boss-style guitar pedal, and fits on any pedal board.
Key Features ● Foot-Controlled Adjustments: Change Time, Feedback, or Blend while you play. ● Analog-Style Delay: Warm, gritty echoes up to 600ms. ● Rugged Build: Built to handle full body weight on stage. ● True Bypass: Keeps your tone pure when switched off. ● Play Sitting or Standing: Built for performance. ● 9V, Center Negative Power ● Morph feedback from short to infinite repeats ● Ramp wet/dry mix for dramatic effect ● Sweep delay time to bend and warble pitch, and so much more
Miller’s Collings runs into a Grace Design ALiX preamp, which helps him fine-tune his EQ and level out pickups with varying output when he switches instruments. For reverb, sometimes he’ll tap the 
