Xotic Effects newest version of the Vox-flavored AC Booster, the AC Booster V2, adds a second, footswitchable boost circuit (tweakable via a small, clear knob tucked among the four main-channel controls), plus a set of four dip switches on the box’s righthand side which engage compression, modern or classic voicing, low-mid boost, and high-mid boost.
This new suite of features packs significant extra functionality into V2’s still-diminutive enclosure. The Vox sounds are all there, and with the high-mids juiced and treble nudged, you’re squarely in clanging Top Boost territory. The modern voicing trades some furry mid-range chunk for a bit more aggression and clarity, while the compression is useful for leveling leads and smoothing out unruly playing.
The boost knob is a little difficult to access, situated as it is in the center of the primary four-knob array. I don’t have particularly big fingers, but even I had trouble twiddling it. That’ll annoy some. But it’s a small price to pay for such a pedalboard-friendly footprint. The boost doses you with a healthy bump in level and gain that’s great for stand-out leads and solos. And speaking of standing out, the upper-mid boost switch is a treat. I found that creating a greater disparity between the high mids from the low mids made for a more precise and satisfying tone-shaping experience than I would experience using a standard mids knob.
There are no shortage of pedals that ape Vox AC30 mojo, but I haven’t seen many that will give you the range of utility that the AC Booster V2 will, for less for $200. Xotic nailed a smart and versatile redesign here.
Previously, John Bohlinger was curious about what active pickups could do for his anemic 1994 Stratocaster and EMG offered their drop-and-go Steve Lukather SL20 Pickguard set. JB was floored with the guitar's fresh voice and responsive dynamics he wanted to expand the active experiment to his beloved 2003 GibsonLes Paul. So we got a set of EMG Fat 55 Retro Active Humbuckers that required a full install and our luthier friend Dave Johnson walks us through the whole process before John got to test out his old friend's tonal makeover.
Learn more about EMG Fat 55 Retro Active Humbuckers here.
The Irish post-punk band’s three guitarists go for Fairlane, Fenders, and a fake on their spring American tour.
We caught up with guitarists Carlos O’Connell and Conor Curley from red-hot Dublin indie rock outfit Fontaines D.C. for a Rig Rundown in 2023, but we felt bad missing bassist Conor “Deego” Deegan III, so we’ve been waiting for the lads to make their way back.
This time, riding the success of their fourth LP, 2024’s Romance, we caught up with all three of them at Nashville’s Marathon Music Works ahead of their April 30 gig to see what they brought across the pond.
Curley’s go-to is this Fairlane Zephyr, loaded with Monty’s P-90s and a Mastery bridge. It mostly stays in standard tuning and, like his other axes, has Ernie Ball Burly Slinky strings.
Blue Boy
Fender sent Curley this Jazzmaster a couple of years ago, and since then, he’s turned to it for heavier, more driven sounds. It’s tuned to E flat, but Curley also tunes it to a unique shoegaze-y tuning for their tune “Sundowner.”
You can also catch Curley playing a Fender Johnny Marr Jaguar.
Twin Win
Fender Twin Reverbs are where Conor Curley feels most comfortable, so they’re his go-to backline. The amps are EQ’d fairly flat to operate as pedal platforms.
Conor Curley’s Pedalboard
Curley’s pedalboard for this tour includes a TC Electronic PolyTune3 Noir, Strymon Timeline, Boss RV-6, Boss PN-2, Boss BF-3, Keeley Loomer, Death by Audio Echo Dream, Fairfield Circuitry Hors d'Ouevre?, Strymon Sunset, Strymon Deco, DigiTech Hardwire RV-7, Electro-Harmonix Nano POG, and Lehle Little Dual.
Fake Out
Connor Deegan didn’t own a bass when Fontaines D.C. began, and his first purchase was the black Fender Jazz bass (right)—or so he thought. He later discovered it was a total knock-off, with a China-made body, Mexico-made neck, and a serial number that belongs to a Jaguar. But he fell in love with it, and its sound—nasal on the high strings, with cheap high-output pickups—is all over the band’s first record, Dogrel. Deego plays with orange Dunlop .60 mm picks, and uses Rotosound Swing Bass 66 strings.
Deegan picked up the Squier Bass VI (left) for its “surfy vibes,” and upgraded the pickups and bridge.
Also in his arsenal is this 1972 Fender P-bass (middle). (He’s a bit nervous to check the serial number.)
V-4 You Go
Deego plays through an Ampeg V-4B head into a Fender 6x10 cabinet.
Conor Deegan’s Pedalboard
Deegan’s board includes a Boss TU-3, Electro-Harmonix Hum Debugger, Boss TR-2, modded Ibanez Analog Delay, Death by Audio Reverberation Machine, Boss CE-2w, Tech 21 SansAmp Bass Driver DI, Darkglass Electronics Alpha Omega Ultra, and Dunlop Volume (X) Mini pedal. A GigRig QuarterMaster helps him switch sounds.
Mustang Muscle
Carlos O’Connell favors this 1964 Fender Mustang, which has been upgraded with a Seymour Duncan Hot Rails pickup since Romance. It’s set up so that the single-coil pickup is always on, and he’ll add in the Hot Rails signal for particular moments.
Ghost of Gallagher
Mustang Muscle
After getting to play a number of Rory Gallagher’s guitars thanks to a private invitation from the guitarist’s estate, O’Connell picked up this Fender Custom Shop Rory Gallagher Signature Stratocaster. The jangly, direct tone of this one is all over tunes like “Boys in the Better Land.”
More Fender Friends
O’Connell runs his guitars, including a vintage Martin acoustic which he picked up in Nashville, through a Fender Twin Reverb and Deluxe Reverb.
Carlos O’Connell’s Pedalboard
The gem of O’Connell’s board is this Soundgas 636p, an imitation of the infamous Grampian 636 mic preamp’s breakup. Alongside it are a TC Electronic PolyTune, Ceriatone Centura, Strymon Volante, Eventide H9, Orchid Electronics Audio 1:1 Isolator, Vein-Tap Murder One, MXR Micro Amp, Moog MF Flange, MXR Smart Gate, and Freqscene Koldwave Analog Chorus. A Radial BigShot ABY navigates between the Twin and Deluxe Reverb.
Guitar players wanting to catch the Grateful Dead’s particular lightning in a bottle exist along a spectrum. Some are content to take inspiration from Jerry Garcia’s playing but make their own way regarding guitar choice and signal path. Others strive to emulate Garcia’s sonic decisions down to the most minor details and create signal paths as close to Jerry’s as possible. In recent years, an ecosystem of gear has developed around fostering Jerry Garcia’s electric tone, including everything from guitars, amps, and stompboxes to on-board preamps and speakers.
Entire books about the Grateful Dead’s gear have been written, so we can’t cover it all here. Garcia tinkered with all facets of his sound from about 1971 until 1978, when his signal path reached stability. By then, his On-Board Effects Loop—an innovation he developed to control how much signal reached his effects—was dialed in, his backline firm, and his choice of effects pedals solidified. Even then, adjustments were made, especially when MIDI arrived or when technology like in-ear monitoring was used. Here are some basics.
Scarlet Fire’s recreation of Garcia’s Wolf, originally built by Doug Irwin.
It starts with guitars. For players wanting to get their Jerry on, there’s a wide range of Garcia-esque instruments—with just as wide a range of prices—out there. Recreations of the Doug Irwin guitars and the Fender Alligator Strat abound. China-built models from companies likePhred Instruments can go for as little as $700 or so. Luthier Thomas Lieber apprenticed with Irwin long ago, and his Lieber Guitars will deliver a copy of a variety of Garcia models. Leo Elliott’s Scarlet Fire Guitars out of Dallas, Texas, takes things in another direction. Elliott builds Doug Irwin replicas that start at $20,000 and go up from there, with a current wait time of about 18 months for an instrument. He’s outfitted many of the top Garcia guitarists today, including Zach Nugent and Jeff Mattson. Elliott says, “I’m a self-taught luthier; I didn’t really build my first guitar until 2010. I understood a little bit about woodworking before I got started, but I learned by reading books and through trial and error. I started building replicas of Doug Irwin’s Wolf guitar right away, which is sort of like building a car and starting with a Ferrari. I didn’t know any better. Then, eventually I got to know Doug Irwin and collaborated with him. So, I got to hold Garcia’s Tiger guitar and get to know it really well. There’s one guy who helps me around the shop, but otherwise, I am building these guitars on my own. I’m collaborating with Doug Irwin on a new series of Tiger guitars, which will retail for 50 grand each.” That’s one way to get your Jerry going.
The JBL-inspired Milkman K-120.
Garcia’s choice of amplifiers is another matter. He preferred Fender Twin Reverbs loaded with JBL Alnico speakers, which were popular amongst many rock bands in the 1970s. The details get complicated; Garcia’s amps were heavily modified, and the Fender Twin served as a preamp that ran to a McIntosh MC-3500 power amp.
It’s hard to find vintage JBL speakers today—at least ones in good shape. San Francisco’s Milkman Sound, founded by Tim Marcus, has created a faithful reproduction of those classic JBLsthey call the K-120. They’re coupling those speakers with a Garcia-style recreation of his Fender Twin that Marcus named the JG-40. “I think 75 percent of Jerry’s tone is in the JBL speakers,” Milkman’s founder says. “But when you start to analyze the other 25 percent, you kind of have to start withDon Rich. [Editor’s Note: Rich was the guitar player in Buck Owens’ band, pioneers of the Bakersfield Sound.] That’s Jerry’s tone, too, but the difference is Garcia’s midrange was a bit throatier. It sounds clean, but really, it’s not clean at the same time. Especially his tone in the late ’70s. There is something about running that Fender Twin Reverb through the McIntosh that would just completely blow out the tone in a really interesting way.”
Garcia colored his tone with off-the-shelf effects. This was, after all, long before the days of boutique pedals. By 1978 and beyond, you’d hear him playing through an MXR Distortion+, an MXR Analog Delay, and an MXR Phase 100. He often used auto wahs, preferring the Musitronics Mu-Tron envelope filter as well as a Mu-Tron Octave Divider and a Mu-Tron combination volume and wah pedal.
When I asked Jeff Mattson, Bella Rayne, and Tom Hamilton Jr. exactly how orthodox they are about using the kind of gear that Garcia did, I got three different answers.
Mattson tells me that because Dark Star Orchestra is doing something very specific, he really has to tailor his sound as carefully to Garcia’s as he can. “Some folks get too hung up on small things, like what kind of cable to use and things like that, and I don’t go that far. But it’s important for Dark Star Orchestra to get Jerry’s sound right because we are covering different eras and different shows. In 2022, for example, we went to Europe and recreated shows from the Dead’s famous Europe ’72 tour, so you have to pay close attention to what kind of gear they were using to do that right.”
Hamilton works differently. He’s always preferred a higher-gain signal than Garcia ever did, landing in more of a British or heavy metal tone. (Randy Rhoads was a big influence.) “I’ve always approached it like, ‘What’s the new information we can put into this thing?’” he says. “Not just recreate but pushing in a forward direction. And anytime I’ve played with the guys who played with Garcia back in the day, they always said to me, ‘You’re here because you’re here. Don’t try and do what we did back in 1978 or do it because Garcia did it that way.’ They’ve always encouraged me to be myself.”
Bella Rayne is just wrapping her head around what it really means to try to sound like Garcia. “Besides Jerry, I’m influenced by guitarists like Dickey Betts and Derek Trucks, so my tone tends to be a bit heavier and bluesy,” she explains. “I’m generally running a Stratocaster through a Fender Twin Reverb. But recently, I was doing a show, and a buddy of mine set up a Jerry rig for me, and that was so cool: JBL speakers, McIntosh head, the whole setup. I had never played through one. I didn’t know what the hype was all about. I plugged in, and it was just amazing; there was such a snap, and I was really commanding the band. I can see myself keeping my current rig but adding a Dead-rig to experiment. But honestly, anything is fine; I am not picky. I just want to play the best that I can.”
See and hear Taylor’s Legacy Collection guitars played by his successor, Andy Powers.
Last year, Taylor Guitars capped its 50th Anniversary by introducing a new guitar collection celebrating the contributions of co-founders Bob Taylor and Kurt Listug to the guitar world. The Legacy Collection revives five of Bob Taylor’s classic acoustic models, curated by the legendary luthier and innovator himself. “To imagine that we’re doing guitars that harken to our past, our present and our future all at the same time,” Bob says, “I really like that.”
In developing the collection, Bob preserved the essence of his originals while integrating performance and playability upgrades introduced during his tenure as designer-in-chief. “It’s an up-to-date version of what those guitars would be,” Bob explains, “but with the same sound.”
Visually, these guitars feel classic—clean, understated and unmistakably Taylor. While Bob’s original aesthetic preferences are showcased in his Legacy models, the nod to the past runs deeper than trade dress.
From his earliest builds, Bob favored slim-profile necks because he found them easier to play. That preference set a design precedent that established Taylor’s reputation for smooth-playing, comfortable necks. Legacy models feature slim mahogany necks built with Taylor's patented New Technology (NT) design. “My first neck was a bolted-on neck but not an NT neck,” Bob says. “These are NT necks because it’s a better neck.” Introduced in 1999, the NT neck allowed for unprecedented micro-adjustability while offering a consistent, hand-friendly Taylor playing experience.
What makes this collection unique within the Taylor line is Bob’s use of his X-bracing architecture, favoring his time-tested internal voicing framework over more recent Taylor bracing innovations to evoke a distinctive tone profile. Since Andy Powers—Taylor’s current Chief Guitar Designer, President and CEO—debuted his patented V-Class bracing in 2018, V-Class has become a staple in Taylor’s premium-performance guitars. Still, Bob’s X-bracing pattern produces a richly textured sound with pleasing volume, balance and clarity that long defined the Taylor voice. All Legacy models feature LR Baggs VTC Element electronics, which Bob says “harkens back to those days.”
The team at Taylor thought the best way to demonstrate the sound of the Legacy guitars was to ask Andy Powers, Bob’s successor, to play them. A world-class luthier and musician, Andy has spent the past 14 years leading Taylor’s guitar innovation. In addition to V-Class bracing, his contributions include the Grand Pacific body style, the ultra-refined Builder’s Edition Collection, and most recently, the stunning Gold Label Collection.
Below you’ll find a series of videos that feature Powers playing each Legacy model along with information about the guitars.
Legacy 800 Series Models
First launched in 1975, the 800 Series was Taylor’s first official guitar series. Today, it remains home to some of the brand’s most acclaimed instruments, including the flagship 814ce, Builder’s Edition 814ce and new Gold Label 814e.
The Legacy 800 Series features the 810e Dreadnought and two Jumbos: the 6-string 815e and 12-string 855e. Each model serves up a refined version of the Dreadnought and Jumbo body shapes Bob inherited from Sam Radding—the original owner of the American Dream music shop where Bob and Kurt first met. “I was making my guitars in the molds that Sam had made at American Dream,” Bob recalls. “There was a Jumbo and a Dreadnought. That’s all we had.”
All three Legacy 800 Series guitars feature one of Bob’s favorite tonewood combos. Solid Indian rosewood back and sides are paired with a Sitka spruce top, yielding warm lows, clear trebles and a scooped midrange.
Aesthetic appointments include a three-ring abalone rosette, mother-of-pearl Large Diamond inlays, white binding around the body and fretboard, and Bob’s “straight-ear” peghead design. Both Jumbo models also showcase a mustache-style ebony bridge—a nod to Bob’s early Jumbo builds.
Legacy 810e
The 810 Dreadnought holds a special place in Bob Taylor’s heart. “My first 810, the one I made for myself, was a thrilling guitar for me to make,” he says. “It’s the one and only guitar I played. It didn’t matter how many guitars we made at Taylor, that’s the one I took out and played.” The Legacy 810e brings back that bold, room-filling Dreadnought voice along with the easy playability expected from a Taylor.
Taylor Guitars | Legacy 810e | Playthrough Demo
Legacy 855e
Taylor’s first 12-strings found an audience in 1970s Los Angeles. “I was making guitars that would find their way to McCabe’s in Santa Monica and Westwood Music,” Bob says, “and these guitars were easy to play. Twelve-strings were a popular sound in that music. It was a modern country/folk/rock music genre that was accepting our guitars because they were easy to play. They also liked the sound of them because our guitars were easier to record.” The Legacy 855e, with its resonant Jumbo body, slim neck and gorgeous octave sparkle, carries that tradition forward.
Taylor Guitars | Legacy 855e | Playthrough Demo
Legacy 815e
The Legacy 815e revives Taylor’s original Jumbo 6-string, delivering a big, lush sound with beautifully blooming overtones.
Legacy Grand Auditoriums
In the early 1990s, Bob Taylor heard a consistent refrain from dealers: “Not everybody wants a dreadnought guitar anymore.” Players were asking for something with comparable volume but different proportions—something more comfortable, yet still powerful. This feedback inspired Bob to design a new body style with more elegant curves, more accommodating proportions and a balanced tonal response. The result was the Grand Auditorium, which Taylor introduced in 1994 to celebrate its 20th anniversary.
Thanks to its musical versatility and easy playability, Bob’s Grand Auditorium attracted a wide variety of players. “We came into our own with our Grand Auditorium,” he says. “People were describing it as ‘all around.’ It’s a good strummer and good for fingerstyle, but it’s not totally geared toward strumming or totally geared toward fingerstyle.” Also referred to as the “Swiss-Army Knife” of guitars or the “Goldilocks” guitar, the GA quickly became a favorite among guitarists across playing styles, musical genres and different playing applications including recording and live performance. “That guitar made studio work successful,” Bob says. It gained a wider fanbase with the debut of the “ce” version, which introduced a Venetian cutaway and onboard electronics. “That became one of our hallmarks,” says Bob. “If you want to plug in your guitar, buy a Taylor.”
Today, the Grand Auditorium is Taylor’s best-selling body shape.
The Legacy Collection features two cedar-top Grand Auditoriums inspired by past favorites: the mahogany/cedar 514ce and rosewood/cedar 714ce. Both models incorporate Bob’s original X-bracing pattern for a tonal character reminiscent of their 1990s and 2000s counterparts. Shared aesthetic details include a green abalone three-ring rosette, ebony bridge pins with green abalone dots, a faux-tortoiseshell pickguard and Taylor gold tuning machines.
Taylor Guitars | Legacy 815e | Playthrough Demo
Legacy 514ce
The Legacy 514ce features solid mahogany back and sides paired with a Western Red cedar top, yielding a punchy midrange and dry, woody sonic personality that pairs beautifully with cedar’s soft-touch sensitivity and warmth. It’s a standout choice for fingerstyle players and light strummers who crave nuance and depth. Distinct visual details include faux-tortoise body and fretboard binding, black-and-white top trim, and mother-of-pearl small diamond fretboard inlays.
Taylor Guitars | Legacy 514ce | Playthrough Demo
Legacy 714ce
The Legacy 714ce also features a cedar top, this time matched with solid Indian rosewood back and sides. The result is a richly textured sound with deep lows, clear trebles and a warm, mellow response. Inspiring as it is, this specific wood pairing isn’t currently offered in any other standard Taylor model. Additional aesthetic details include green abalone dot fretboard inlays, black body and fretboard binding, and black-and-white “pinstripe” body purfling.
While the Legacy Collection spotlights Taylor’s past, newer models from the Gold Label, Builder’s Edition and Somos Collections show the company’s legacy is always evolving. Explore the Legacy Collection at taylorguitars.com or visit your local authorized Taylor dealer.
![Fontaines D.C. Rig Rundown [2025]](https://www.premierguitar.com/media-library/image.jpg?id=60290466&width=1245&height=700&quality=85&coordinates=0%2C0%2C0%2C0)
Mustang Muscle
