Everyone knows the feeling of playing the same old blues licks time and time again. You don’t have to get stuck in this rut, and in fact there is an awesome way out of it.
Intermediate
Advanced
- Convert your simple pentatonic boxes into chromatic powerhouses.
- Learn how chromatic enclosures and passing tones can be used when playing the blues.
- Understand how to use diminished scales over dominant 7 chords.
The greatest modern blues players all have a fantastic understanding of how to inject “outside” notes into their phrases to create new and wild sounds. Those crazy-sounding notes are chromatic tones, but placing them in the right spot is what takes a phrase from dull to amazing. I’m going to show you how to take a boring blues scale and make it hip and exciting.
Chromatic Enclosures
If you’re used to playing pentatonic blues scales, then making a few small adjustments to how you visualize these scales will allow you to start adding chromatic notes to your phrases. Playing over a major blues, the commonly used notes would be the 1–2–3–4–5–6–b7. Ex. 1 introduces several chromatic notes using a technique called “enclosure.” This is when a target note is approached from above and below before being played. Chromatic enclosures are when you employ non-diatonic (chromatic) notes.
Ex. 1
The b5, b3, b6 and b9 are all used as a way of targeting the scale note nearest to them. Beginning on the b5 (Eb), the lick moves to the 5 as it climbs up the A major pentatonic scale (A–B–C#–E–F#). A chromatic enclosure is then used beginning on beat 3. The 4 (D) is played followed by the 2 (B) before the chromatic target note b3 (C). The exact same concept and fingering is used beginning on the “and” of beat 1 in measure three. The b6 (F) is targeted using enclosure in between the b7 (G) and 5 (E). As part of the final few notes, the root (A) is targeted using enclosure between the b9 (Bb) and b7 (G), which outlines a diminished 7 idea.
Passing Tones
One of the easiest ways to use chromatics in your playing is to simply connect scale tones using the notes in between them (i.e. passing tones). Ex. 2 utilizes this concept, which is often found in jazz playing. We can use the same blues scale from the last lick. However this time we are connecting scale tones rather than simply using chromatic enclosures. In measure one on beat 3, the B descends to the A using the Bb as a passing note. In measure two there is another three-note passage where the middle note is a passing tone, going from F# to E using the F in between. Later in that measure there is a four-note passing tone idea in which the D is connected to the B simply by descending chromatically across all four notes.
Ex. 2
Changing Directions
A great tool when using chromatics is changing the direction of the chromatic notes. This helps break up the repetitive feel of using passing tones. In Ex. 3 the beginning of this C7 lick starts with a chromatic slide into the root note and then descends from Eb to C before climbing back up to E on the 12th fret. However, instead of just climbing down and back up, using the b7 on the 2nd string creates an immediate direction change as the note drops down before the scale continues back upward. To help stop this from sounding simply like a descending and ascending scale, the changes in rhythm and direction occur simultaneously to create a more musical phrase. Just for fun, the last part of the lick uses a minor blues idea with a b5 passing tone.
Ex. 3
Start Using Grace Notes
Stevie Ray Vaughan fans may recognize a specific sound in this slow Bb7 blues lick. Ex. 4 starts with a standard blues bend opening, but just as SRV liked to do, the b9 is used as a grace note to and from the root. By slurring from the root note to the b9 and back you can create a grace note that sounds like a flurry when done quickly. In measure 2, the quick slide from the E to the Eb and then the quick hammer-on from the Db to D are great ways to use fast, slurred grace notes to hint at chromatic tones without
Ex. 4
Connecting The Blues Box
When playing in your standard minor blues box, it’s incredibly easy to use chromatics, because you have multiple passing notes right there under your fingers. In Ex. 5, the first measure of this E9 lick simply climbs up the minor box via a triplet lick that crosses the middle four strings. Then it jumps from the C# up to the G# on the 1st string and descends chromatically all the way to the root note on the 12th fret. This passing tone idea is then repeated by connecting the 15th fret on the 2nd string to the 12th fret. In the middle of measure three there is a common blues idea of playing the b3 into the 3 using a slide, but notice, this is also part of a chromatic enclosure. This is then repeated in measure four, but this time as a grace note hammer-on. The coolest part of the lick is the end where it slides from the C (b6) to the C# (6) and then plays two chromatic tritones back to back (C# to G and D to G#).
Ex. 5
Double-Stops
Double-stops are a great way to use chromatic ideas because they connect nearly identical shapes down the neck. In this country-sounding lick in B, this concept is laid out on the 3rd and 2nd strings descending down the scale. Ex. 6 has us starting on a B major double-stop moving down through the scale. If you mapped out the double-stops without all the passing tones they would outline these chords: B–A–G#m–F#m–E–D#m–C#m–B. However, because of the similarity in shape between these double-stops, it is very easy to simply play passing tones between them. Once again, the rhythmic variety helps to stop this from sounding like an exercise and makes it much more musical. The end of the lick uses single-note passing tones to finish up the phrase.
Ex. 6
Diminished Sounds Are Awesome
Fusion players love the use of chromatics. The reason for this is that introducing the b9 to a dominant 7 chord creates a diminished 7 chord. Ex. 7 showcases this diminished sound over a D7#9 chord. The lick starts with a diminished arpeggio sweep on the three high strings near the D blues box at the 10th fret. The next four notes outline the half-whole diminished scale (3–#9–b9–1). There are also a series of half-step bends that hint at these diminished notes, helping to create a variety of articulations instead of simply plucking everything. To further create a diminished sound, the use of a tritone is found in the middle of the last measure when the C to F# is played.
Ex. 7
7 to 5 Always Works
By now you probably have a decent understanding of how to include chromatic notes in your playing. However, one common rule will pretty much always work when playing over a dominant 7 chord. Ex. 8 showcases the rule of descending from the b7 to the 5 of any dominant chord. This passing tone idea is a great way to create a subtle yet sophisticated phrase. This E7#9 lick plays through this 7 to 5 concept twice, but the rhythm is what makes it sound different each time. Notice how each time the 7 to 5 concept is used it is merely on the way to a separate target note. This is key to the phrasing. Instead of making any of the chromatic notes or the 7 or 5 the target of the phrase, this idea simply is used to introduce a new note, which is the accented target note. The first time it is used at the beginning of measure one, the target note is E. Then later in measure four the target note is G.
Ex. 8
Mix and match these cool ideas and you’ll definitely add some spice to a recipe that can occasionally get a little stale for us all. Have at it!
- Chromatic CAGED - Premier Guitar ›
- Beyond Blues: John Scofield - Premier Guitar ›
- Beyond Blues: Chromatic Colors - How to Add Outside Notes to ... ›
- Chromatic CAGED - Premier Guitar ›
- Chromatic CAGED - Premier Guitar ›
Joe Bonamassa and Brent Mason make guest appearances on Andy Wood’s new instrumental album, out August 9.
The 11-track collection of instrumental compositions is slated for release on August 9th . Andy Wood is backed by a collection of some of Music City’s finest musicians on drums, bass, organ, keys, strings and even traditional Asian instruments. Guitar legends Joe Bonamassa and Brent Mason also lend their talents to album. The album is available in numerous physical configurations as well as available via all digital service providers here.
Free Range Chicken feat. Brent Mason (Official Music Video) - Andy Wood
From the opening track “Shoot The Sun Down” to the outro of “Believe,” Andy Wood expresses his emotions through his fingers and playing. Andy Wood tackles the Alice In Chains classic “Rooster” in a solo guitar arrangement that demonstrates Wood’s versatility on the instrument. Joe Bonamassa lends his talents to the track “Moaning Lisa” and thefirst single “Free Range Chicken” features another Nashville legend, Brent Mason.
Andy Wood, Charisma.
The tracklist for Charisma is:
1) Shoot The Sun Down
2) Free Range Chicken feat. Brent Mason
3) Rooster
4) Storms and Sparrows
5) Charisma
6) Cherry Blossoms
7) Master Gracey’s Manor
8) Hylia
9) Moaning Lisa feat. Joe Bonamassa
10) Copperhead
11) Believe
Andy Wood will be touring throughout 2024 and beyond in support of Charisma with a handful of recently announced dates and more dates to be announced in the future. Andy also hosts a sleepaway guitar camp - The Woodshed Guitar Experience – that will be returning this September and registration is currently open at https://www.woodshedguitarexperience.com. Aside from that, he also spends time as the band leader for the famed band The Stowaways onannual sold-out cruise, Shiprocked The announced tour dates are below and tickets for all upcoming events can be found at https://www.andywoodmusic.com/events/.
Cardinal Black's guitar slinger explains the bond he's formed with the overlooked goldtop.
The T-style Big Mamie has a teak body, roasted-flame-maple neck, and ebony fretboard.
Built with wood from a World War II battleship, this reader’s guitar holds a lot of history.
I love it when guitars and history come together.
My newest guitar, “Big Mamie,” was built with original teak from the deck of the USS Massachusetts (BB-59). This wood saw action in World War II, during multiple campaigns in the 1940s.
I was checking Facebook one day and I saw a post from Battleship Cove (located in Fall River, Massachusetts) where they were auctioning off this Telecaster-style body crafted by Rhode Island luthier Vincent Goulart. The proceeds of the auction would go to helping restore the battleship.
I knew I had to have it. Not only was this a piece of United States and Massachusetts history, but it held a special place in my memories. When I was a kid, my grandparents would take us to Battleship Cove where we’d explore the ships, the submarine, and the historical displays. Later, when I had my own kids, we’d visit and do overnight sleepovers with Scouts. We slept on “Big Mamie” and walked the decks from where this wood was taken.
Daniel had Big Mamie’s neckplate custom laser-engraved with a silhouette of the USS Massachusetts (BB-59), and the dates that can be seen on the battleship’s plaque.
After winning the auction, I was connected to Vincent and he told me the story of how he came to build this body for the restoration fundraiser. He’s a talented luthier, but each of his guitars has to have a unique history/story. This was right up his alley!
We spoke a few times, discussing what I liked to play, and how I’d like the finished guitar to look and sound. In the end, I decided on some standard Fender chrome components for tuners, neck plate, ferrules, etc. For the pickups, I went with Lindy Fralin Blues Specials. The controls are also from Fralin; I decided on the flipped-control orientation with the push-pull mods for the volume engage/disengage and tone caps (.02 MFD and 0.047 MFD, film and oil, respectively).
The vintage/modern roasted-flame-maple neck, with an ebony fretboard, was custom ordered from Warmoth. The neck had an adventure all of its own after initially being lost in shipment. It finally showed up about a week or two after being written off as lost (and after a new order was placed).
“Now I have a piece of history here in my room that I can pass down to my family.”
For the neck plate, I had it custom laser-engraved with a silhouette of the battleship and dates from an onboard plaque. The strap, from Well-Hung Guitar Straps in Canada, fits the patriotic theme. I’m also using oversized strap buttons from Well-Hung.
Over a couple visits to Vincent’s place, he helped me put together all the components and bring “Big Mamie” to life. Now I have a piece of history here in my room that I can pass down to my family. It also gives me a reason to work on my admittedly novice guitar skills.
These pedals are designed with fast response times, versatile routing options, and durable construction.
ISP Technologies has introduced the latest generation of their pioneering noise reduction products: the Decimator X Pedal Series for guitarists and bassists.
Building upon the legacy of ISP’s earlier Decimator pedals, the new Decimator X models utilize cutting-edge patented circuitry to get rid of unwanted noise and 60-cycle hum, effectively eliminating even the most stubborn background noise.
The pedals offer lightning-fast response times and ultra-smooth decay with enhanced tracking technology. If you’re playing staccato, with or without pauses, or if you desire a nice long decay, this technology allows for a natural sound and feel. You can preserve the integrity of your tone, even during fast-paced passages and intricate playing.
Whether you’re running a complex pedalboard setup or keeping it simple, the Decimator X pedals offer versatile routing options to suit your needs. With flexible input and output configurations, you can easily integrate the pedals into any rig, ensuring maximum compatibility and convenience.
ISP offers two variations of the pedal depending on your routing needs. The standard Decimator Xsimply has an IN and OUT jack. You place this pedal in your rig after your gain or noise-prone pedals. The THRESHOLD control is set based on the noise coming into the IN jack.
The Decimator X G-String provides 4 jacks: GUITAR IN, GUITAR OUT, DECIMATOR IN, and DECIMATOROUT. This provides a direct connection from the GUITAR and the direct GUITAR signal is used to control the block of DECIMATOR noise reduction. This allows you to insert your noisy pedals between GUITAROUT and DECIMATOR IN, but the DECIMATOR noise reduction is controlled by the direct GUITAR signal at the GUITAR IN. This configuration offers an important advantage: you can switch from extreme high gain to crunch or clean and never need to re-adjust the threshold control on the pedal, because the direct guitar signal is used to control the noise reduction block.
Built like a tank, the X pedals are housed in a durable enclosure, designed to withstand the demands of the gigging musician and provide reliable performance night after night. Both pedals have a battery compartment for a 9-volt battery and provide a 5.5mm barrel connector for use with a standard external 9-volt DC power adaptor. The new Decimator X carries a $146.72 street price; the Decimator X G-string carries a $236.42 street price.
For further information visit isptechnologies.com.