A twisted look at how to up the twang factor on your next solo.
Intermediate
Beginner
- Develop a more intervallic approach to double-stops
- Create ear-twisting, tension-filled solos.
- Understand how to imply chords with only a few notes.
In this lesson, we are going to cover a super important and very common technique. Double-stops are one of the pillars for defining a country guitar sound. I'll break down ways to approach this technique from an intervallic standpoint. If you feel it will require too much theory, don't worryā¦ we won't go down that rabbit hole very far.
Double-stops are simply two notes played simultaneously. The difference between those notes is defined as the intervallic relationship. The larger the difference between notes, the higher the number or interval. In the following examples I specifically started with the most common and smaller intervals: major thirds and minor thirds. Then we will work our way to fourths, fifths, and sixths.
Any interval is fair game, but I decided to go with more common voicings for these examples. When picturing the sound of intervals just think of the emotion they reflect. Major is a "happier" sound and minor is "sadder," while augmented or diminished create tension. Make sure to use your ear as much as theory to gain your desired emotion when using intervals, especially in double-stop licks. In addition to focusing on double-stops for this lesson, there will also be articulations like slides, hammer-ons, pull-offs, and of course, bends. Let's get to the examples.
Ex. 1 is an ascending lick using primarily major thirds. There's a little chromaticism on the front end of the lick but it's pretty much a stock bluegrass lick that ends nicely with a slide and "safe" resolution. You could easily play just the lower note and it'd be a cool lick but the double-stop fattens things up considerably. I'd use pick and middle finger on the picking hand until you get to the 3rd and 2nd strings then use ring and middle. Make it snappy and a little muted to really get that "spanky" sound.
Ex. 1
Ex. 2 is a descending lick over a D chord that uses major thirds as a focus but we shift gears and add a tritone or b5 interval at the end for some tension. Note the articulationsāI'd roll the ring finger on the fretting hand when you're on the 12th fret of the G and B double note moving to the D string.
Ex. 2
This "thematic" lick (Ex. 3) uses the same idea and then moves up the neck to do it again. It works best over a Bm chord and uses primarily fourths throughout the lick with major thirds kicking in on the G and B strings.
Ex. 3
Fifths have a real open sound to them, and you'll hear that in Ex. 4. As you move up to the 12th fret on the 1st string switch from your index to pinky finger while keeping the middle finger on the 2nd string. I threw in some blue notes or b5 intervals and added a bend towards the end to spice it up. Use your ring finger to make that full-step bend and then use your index for the last slide.
Ex. 4
Ex. 5 uses both major and minor sixths. This descending lick also sneaks in an open-string idea to add some rhythm and note displacement. You end the lick on adjacent strings and play a stretched-out fingering using pinky on 7th fret of the 4th string and slide your index from the b3 to the 3 (C#).
Ex. 5
Ex. 6 is a bluesy sounding lick over Gāand this one has a double-stop bend. I'd use my ring finger to bend both notes and push them down, not up. The end of the lick has a bluesy pull-off that completes the lick quite nicely.
Ex. 6
Here's a lick (Ex. 7) that uses an E pedal tone against an ascending double-stop line that works great as a turnaround. Make sure to time the muted note on the 4th string and you'll end this one on the B7 approached from a half-step above. This lick works great over a blues, rockabilly, or swing feel.
Ex. 7
This lick (Ex. 8) is a cool walkdown in F. It's a rhythmic sequence that works nicely moving from a major chord to a diminished sound to a dominant chord before resolving. Here, we're going from a I chord to a Idim before hitting a V7 and then a resolution to the tonic. Any way you cut it, this functions nicely going into F.
Ex. 8
Double-stops can fatten your sound and add tons of possibilities by creating tension and release from using different intervallic patterns. Obviously, I've only scratched the surface on the possibilities. I encourage you to find some intervals you like and experiment to find your favorite licks. It's a staple of any country player and I highly advise you to follow your ear hear and equate what you're doing to an emotion. The best players tell a story with their solos. So what's gonna be the story you tell the next chance you get a chance to rip a solo?
Selenium, an alternative to silicon and germanium, helps make an overdrive of great nuance and delectable boost and low-gain overdrive tones.
Clever application of alternative materials that results in a simple, make-everything-sound-better boost and low-gain overdrive.
Might not have enough overdrive for some tastes (although thatās kind of the idea).
$240 street
Cusack Project 34 Selenium Rectifier Pre/Drive Pedal
cusackmusic.com
The term āselenium rectifierā might be Greek to most guitarists, but if it rings a bell with any vintage-amp enthusiasts thatās likely because you pulled one of these green, sugar-cube-sized components out of your ampās tube-biasing network to replace it with a silicon diode.
Thatās a long-winded way of saying that, just like silicon or germanium diodesāaka ārectifiersāāthe lesser-seen selenium can also be used for gain stages in a preamp or drive pedal. Enter the new Project 34 Selenium Rectifier Pre/Drive from Michigan-based boutique maker Cusack, named after the elementās atomic number, of course.
An Ounce of Pre-Vention
As quirky as the Project 34 might seem, itās not the first time that company founder Jon Cusack indulged his long-standing interest in the element. In 2021, he tested the waters with a small 20-unit run of the Screamer Fuzz Selenium pedal and has now tamed the stuff further to tap levels of gain running from pre-boost to light overdrive. Having used up his supply of selenium rectifiers on the fuzz run, however, Cusack had to search far and wide to find more before the Project 34 could launch.
āToday they are usually relegated to just a few larger industrial and military applications,ā Cusack reports, ābut after over a year of searching we finally located what we needed to make another pedal. While they are a very expensive component, they certainly do have a sound of their own.ā
The control interface comprises gain, level, and a traditional bright-to-bassy tone knob, the range of which is increased exponentially by the 3-position contour switch: Up summons medium bass response, middle is flat response with no bass boost, and down is maximum bass boost. The soft-touch, non-latching footswitch taps a true-bypass on/off state, and power requires a standard center-negative 9V supply rated at for least 5 mA of current draw, but you can run the Project 34 on up to 18V DC.
Going Nuclear
Tested with a Telecaster and an ES-355 into a tweed Deluxe-style 1x12 combo and a 65 Amps London head and 2x12 cab, the Project 34 is a very natural-sounding low-gain overdrive with a dynamic response and just enough compression that it doesnāt flatten the touchy-feely pick attack. The key adjectives here are juicy, sweet, rich, and full. Itās never harsh or grating.
āThe gain knob is pretty subtle from 10 oāclock up, which actually helps keep the Project 34 in character.ā
Thereās plenty of output available via the level control, but the gain knob is pretty subtle from 10 oāclock up, which actually helps keep the Project 34 in character. Settings below there remain relatively cleanāamp-setting dependent, of courseāand from that point on up the overdrive ramps up very gradually, which, in amp-like fashion, is heard as a slight increase in saturation and compression. The pedal was especially fantastic with the Telecaster and the tweed-style combo, but also interacted really well with humbuckers into EL84s, which certainly canāt be said for all overdrives.
The Verdict
Although I almost hate to use the term, the Project 34 is a very organic gain stage that just makes everything sound better, and does so with a selenium-driven voice thatās an interesting twist on the standard preamp/drive. For all the variations on boost and low/medium-gain overdrive out there itās still a very welcome addition to the market, and definitely worth checking outāparticularly if youāre looking for subtler shades of overdrive.
You may know the Gibson EB-6, but what you may not know is that its first iteration looked nothing like its latest.
When many guitarists first encounter Gibsonās EB-6, a rare, vintage 6-string bass, they assume it must be a response to the Fender Bass VI. And manyEB-6 basses sport an SG-style body shape, so they do look exceedingly modern. (Itās easy to imagine a stoner-rock or doom-metal band keeping one amid an arsenal of Dunables and EGCs.) But the earliest EB-6 basses didnāt look anything like SGs, and they arrived a full year before the more famous Fender.
The Gibson EB-6 was announced in 1959 and came into the world in 1960, not with a dual-horn body but with that of an elegant ES-335. They looked stately, with a thin, semi-hollow body, f-holes, and a sunburst finish. Our pick for this Vintage Vault column is one such first-year model, in about as original condition as youāre able to find today. āWhy?ā you may be asking. Well, read on....
When the EB-6 was introduced, the Bass VI was still a glimmer in Leo Fenderās eye. The real competition were the Danelectro 6-string basses that seemed to have popped up out of nowhere and were suddenly being used on lots of hit records by the likes of Elvis, Patsy Cline, and other household names. Danos like the UB-2 (introduced in ā56), the Longhorn 4623 (ā58), and the Shorthorn 3612 (ā58) were the earliest attempts any company made at a 6-string bass in this style: not quite a standard electric bass, not quite a guitar, nor, for that matter, quite like a baritone guitar.
The only change this vintage EB-6 features is a replacement set of Kluson tuners.
Photo by Ken Lapworth
Gibson, Fender, and others during this era would in fact call these basses ābaritone guitars,ā to add to our confusion today. But these vintage ābaritonesā were all tuned one octave below a standard guitar, with scale lengths around 30", while most modern baritones are tuned B-to-B or A-to-A and have scale lengths between 26" and 30".)
At the time, those Danelectros were instrumental to what was called the ātic-tacā bass sound of Nashville records produced by Chet Atkins, or the āclick-bassā tones made out west by producer Lee Hazlewood. Gibson wanted something for this market, and the EB-6 was born.
āWhen the EB-6 was introduced, the Bass VI was still a glimmer in Leo Fenderās eye.ā
The 30.5" scale 1960 EB-6 has a single humbucking pickup, a volume knob, a tone knob, and a small, push-button āTone Selector Switchā that engages a treble circuit for an instant tic-tac sound. (Without engaging that switch, you get a bass-heavy tone so deep that cowboy chords will sound like a muddy mess.)
The EB-6, for better or for worse, did not unseat the Danelectros, and a November 1959 price list from Gibson hints at why: The EB-6 retailed for $340, compared to Dano price tags that ranged from $85 to $150. Only a few dozen EB-6 basses were shipped in 1960, and only 67 total are known to have been built before Gibson changed the shape to the SG style in 1962.
Most players who come across an EB-6 today think it was a response to the Fender Bass VI, but the former actually beat the latter to the market by a full year.
Photo by Ken Lapworth
Itās sad that so few were built. Sure, it was a high-end model made to achieve the novelty tic-tac sound of cheaper instruments, but in its full-voiced glory, the EB-6 has a huge potential of tones. It would sound great in our contemporary guitar era where more players are exploring baritone ranges, and where so many people got back into the Bass VI after seeing the Beatles play one in the 2021 documentary, Get Back.
Itās sadder, still, how many original-era EB-6s have been parted out in the decades since. Remember earlier when I wrote that our Vintage Vaultpick was about as original as you could find? Thatās because the modelās single humbucker is a PAF, its Kluson tuners are double-line, and its knobs are identical to those on Les Paul āBursts. So as people repaired broken āBursts, converted other LPs to āBursts, or otherwise sought to give other Gibsons a āGolden Eraā sound and look ... they often stripped these forgotten EB-6 basses for parts.
This original EB-6 is up for sale now from Reverb seller Emerald City Guitars for a $16,950 asking price at the time of writing. The only thing that isnāt original about it is a replacement set of Kluson tuners, not because its originals were stolen but just to help preserve them. (They will be included in the case.)
With so few surviving 335-style EB-6 basses, Reverb doesnāt have a ton of sales data to compare prices to. Ten years ago, a lucky buyer found a nearly original 1960 EB-6 for about $7,000. But Emerald Cityās $16,950 asking price is closer to more recent examples and asking prices.
Sources: Prices on Gibson Instruments, November 1, 1959, Tony Baconās āDanelectroās UB-2 and the Early Days of 6-String Bassesā Reverb News article, Gruhnās Guide to Vintage Guitars, Tom Wheelerās American Guitars: An Illustrated History, Reverb listings and Price Guide sales data.
Some of us love drum machines and synths, and others donāt, but we all love Billy.
Billy Gibbons is an undisputable guitar force whose feel, tone, and all-around vibe make him the highest level of hero. But thatās not to say he hasnāt made some odd choices in his career, like when ZZ Top re-recorded parts of their classic albums for CD release. And fans will argue which era of the bandās career is best. Some of us love drum machines and synths and others donāt, but we all love Billy.
This episode is sponsored by Magnatone
An '80s-era cult favorite is back.
Originally released in the 1980s, the Victory has long been a cult favorite among guitarists for its distinctive double cutaway design and excellent upper-fret access. These new models feature flexible electronics, enhanced body contours, improved weight and balance, and an Explorer headstock shape.
A Cult Classic Made Modern
The new Victory features refined body contours, improved weight and balance, and an updated headstock shape based on the popular Gibson Explorer.
Effortless Playing
With a fast-playing SlimTaper neck profile and ebony fretboard with a compound radius, the Victory delivers low action without fret buzz everywhere on the fretboard.
Flexible Electronics
The two 80s Tribute humbucker pickups are wired to push/pull master volume and tone controls for coil splitting and inner/outer coil selection when the coils are split.
For more information, please visit gibson.com.