True to their past, the Custom Series amps rely on 3 x 12AX7 dual triode vacuum tubes in the pre-amp stage, and 4 x EL84 pentode tubes in the power stage of the 30-Watt AC30C2 and AC30C2X. The 15-Watt AC15C1 uses 2 x EL84 tubes.
All Custom Series models offer two channels: Normal and Top Boost. Each channel is equipped with its own Volume control, and the Top Boost channel offers highly interactive Treble and Bass tone controls as well. This powerful channel pairing provides an abundance of tone-crafting control. Both channels utilize the Tone Cut and Volume controls in the Master section. The Tone Cut control operates in the power stage rather than the preamp stage, allowing an additional degree of tone-shaping. The Master Volume control works in conjunction with the individual volumes of each channel to create just the right degree of gain-staging. By balancing the individual and Master volumes, the Custom Series can deliver the coveted clean VOX “chimey” sound, a powerful overdriven tone, and everything in between.
VOX Amp Designers Dave Clarke and Tony Bruno combined the coveted sounds of a vintage AC amplifier with modern changes, giving these amps the extra reliability and tonal palette necessary for modern players. The Custom Series utilizes a solid state rectifier that makes the amp louder, tighter, and more responsive to pick attack while retaining the B-plus voltage, chime, tone and output stage compression of a vintage VOX AC30.
All Custom Series amplifiers provide the VOX Classic Tremolo effect, with adjustable controls for both the speed and depth. A warm Spring Reverb is also included, adding spaciousness to the sound. The AC30C2 and AC30C2X offer an additional tone control in the Reverb section, plus an effects loop that allows users to incorporate their favorite effects into the Custom Series sound. True Bypass switching takes the entire effect loop out of the circuit.
Standard models are equipped with Celestion Greenback speakers; the AC30C2X is equipped with Celestion Alnico Blues. The optional footswitch provides a hands-free method for turning the Reverb and Tremolo effects on and off while performing.
AC30C2X: 30 Watts; 2 x 12" AlNiCo Blue Celestion speakers, $TBD, Available April 2010
AC30C2: 30 Watts; 2 x 12" G12M Greenback Celestion speakers, $1500.00, Available March 2010
AC15C1: 15 Watts; 1 x 12" G12M Greenback Celestion speaker, $900.00, Available March 2010
For more information: