Options are virtually limitless when it comes to effects. PG readers show us their way to wire up and fire up a pedalboard.
Year after year, we hear from our eclectic audience of stompers with diverse tonal ideas and different things to say. For many of you, true joy comes from putting together your personalized toolbox. For example, one of our readers has an entire Moog pedalboard. A player from Wales uses seven loops and sets them up to conjure the intricate techniques of Paul Gilbert, John Petrucci, and Devin Townsend. One guitarist only uses three pedals but has double that on his board, and yet another decided to take his dirt boxes from the stage into the studio to work on film scores. Read on to get inspired. Perhaps you'll discover something you've never seen done, or get an idea for your ultimate board.
Andrew Phillips: Wailing in Wales
I live in Wales, U.K. This pedalboard has been an ongoing project for the last few years, but I think it’s finally finished … for now! All the pedals are routed into a QuarterMaster QMX 10, made by TheGigRig. This receives the output from the guitar. The rest goes something like this:
Loop 1: TC Electronic PolyTune that acts as a mute.
Loop 2: MXR EVH90 Phase 90 and Petrucci Cry Baby Wah.
Loop 3: TC Electronic HyperGravity Compressor and TC Electronic Petrucci The Dreamscape for clean Dream Theater tones.
Loop 4: Boss SD-1 into KHDK Ghoul Screamer.
Loop 5: Boss SD-1 into Friedman BE-OD (sometimes substituted for Mesa/Boogie Grid Slammer and soon to be Horizon Devices Precision Drive). Loop 4 is used with high-gain amp settings while Loop 5 is used to boost lower-gain amp settings.
Loop 6: DigiTech Whammy and Eventide PitchFactor (with Ernie Ball expression pedal) for Steve Stevens’ ray gun sounds.
Loop 7: MXR EVH117 Flanger.
I have three loops left for future purchases. The QuarterMaster goes out into a Decimator Pro Rack G, which goes to a Mesa/Boogie TriAxis preamp, controlled by a Behringer FCB1010 MIDI Foot Controller.
The effects loop of the TriAxis goes to a Mesa/Boogie Five-Band Graphic EQ, then to the MXR Stereo Chorus. My signal then goes to three TC Electronic pedals: a Flashback set for single repeats for the Paul Gilbert “Echo Song” effect, another Flashback set on a Petrucci “Mountain Top” lead setting, and a Hall of Fame Reverb pedal, which goes into the final Flashback set on a ping-pong. This way I can stack delays and even introduce the reverb for Devin Townsend effects. Then it goes back into the TriAxis and is amplified by either a Matrix GT1000FX or Marshall EL84 20/20 through two Mesa/Boogie Rectifier 2x12 cabs. It’s all on a Pedaltrain PRO pedalboard, juiced up by two Voodoo Lab Pedal Power 2 Plus power supplies.
Bill Raven: Bright Switchin’, Whiskey Burnin’
I’m a guitarist for a country-rock group from La Crosse, Wisconsin, called Burnin’ Whiskey Band. I have a versatile setup that allows me to cover a lot of bases and sounds. I use two blue paisley Blackbird pedalboards. The beginning of my chain is a Line 6 Relay G10, Boss TU-3W Waza Craft, and MXR Reverb on the small board. Then I jump to a Cry Baby Wah, MXR Dyna Comp, MXR Phase 90, MXR Uni-Vibe, Xotic EP Booster, Maxon Envelope Filter, Malekko Sloika, MXR Distortion III, Malekko Helium, Xotic EP Booster with bright switch, Analog Man Prince of Tone, MXR GT-OD, Way Huge Echo-Puss, Strymon DIG, Line 6 M9 (for different tremolo), and a Fender A/B switch (A goes to normal channel on a Fender Deluxe Reverb, B to vibrato channel). This way I can use the amp reverb/tremolo and get a brighter sound on B, and pedal distortion on A, because the “normal” channel on a Deluxe Reverb doesn’t have the bright cap like the vibrato channel. Also, the reason I use two EP Boosters is one is set for my Telecaster and the other, with a bright switch, is set for a Stratocaster.
BJ Beyers: Cosmic Oddities
This setup provides an amazing amount of flexibility, because it can easily nail any tone, from pristine cleans to cosmic oddities to crushing distortions. I’ve made an effort to buy or build what I consider top-class pedals for each effect category, and ended up with an oversized board full of inspiring tones.
My signal chain is as follows: Dunlop Cry Baby Classic Fasel Inductor Wah, handbuilt BYOC 5-knob compressor, Boss DS-1 Distortion (Keeley mod), Analog Man King of Tone overdrive, handbuilt BYOC Ram’s Head Big Muff fuzz clone, an all-white Moogerfooger MIDI MuRF, EarthQuaker Devices Sea Machine chorus, Way Huge Supa-Puss delay, Neunaber Slate reverb with EXP expression pedal, TC Electronic Ditto Looper, a handbuilt BYOC A/B/Y splitter than runs into independent channels of my Vox amp, and a Vox controller that toggles spring reverb and a tremolo.
Chris Roman: Downsized Dirt
I moved from playing live to being a studio player focused on film scores, so I downsized my dirt boxes and started collecting ones that produced different sounds that could be manipulated. I run a compressor and noise gate first, and then I split my signal into two amps: one clean, one dirty. I have a healthy selection of amps in my studio, but my go-to amps are a Matchless Avalon 30 for the clean and a Matchless Excalibur 30 for dirt. Here’s my chain:
• Front end: TC Electronic PolyTune Mini, Keeley 4 Knob Compressor (limited gold top finish), ISP Decimator, Radial Bones Twin City AB/Y Box.
• Clean amp: Electro-Harmonix POG2, Coppersound Effects Telegraph Stutter, Electro-Harmonix Mel9 Tape Replay Machine, JHS Colour Box, MXR Script Phase 90 reissue, Empress Effects Vintage Modified Superdelay, Empress Effects Reverb.
• Dirty amp: Matchless Hot Box III, MJM Effects Brit Bender, Devi Ever FX Bit: Legend of Fuzz, Ibanez TS9B Bass Tube Screamer.
The pedalboards are custom-made by Blackbird Pedalboards, and I use a Voodoo Lab Pedal Power 2 for power.
Fernando Greene: Mean Mooging
This board comes out of many years of being picky and exact in my wants and needs with effects. I handbuilt the Moog board myself. The switching is on a Pedaltrain Grande frame and it’s all powered by TheGigRig. After typing this out, it was more than I expected. Ha-ha—I have a gear problem!
Main board: Strymon Deco, Strymon El Capistan, Pete Cornish ST-2, Cali76, Roger Mayer Voodoo Vibe, Mission Engineering Expressionator, TheGigRig Bank Up Switch, Analog Man Surface, Peterson Strobe Stomp, TheGigRig WetBox, JHS Colour Box, Rockett Treble Boost, Rockett Afterburner, Sustain Punch Creamy Dreamer, GTC Bloody Finger, Mission Engineering Expression Pedal, RMC10 wah, Mission Engineering VM-1, Chicago Iron Octavia, TheGigRig G2, and an Eventide Space.
All-Moog board: CP-251 (connected and used with Phaser), MF-104SD, MF-105 MIDI MuRF, MF-105B Bass MuRF, MF-108M, MF-101 Lowpass Filter, MF-102 Ring Modulator, MF-103 12-Stage Phaser, MF-107 FreqBox, three Expression Pedals (to control a MF-104SD), and a MP-201 Multi-Pedal (controls Lowpass Filter, Ring Modulator, 12-Stage Phaser, FreqBox).
Joe Giordano: Illinoise
I live just outside of Chicago, Illinois, where I play with a band called Dig Engine. I love Premier Guitar! Here’s my pedalboard: Sarno Steel Guitar Black Box (not pictured), Neo Ventilator II (Leslie speaker simulator), Dunlop GCB95 Cry Baby Wah, two Ibanez TS9 Tube Screamers (silver modification done by Analog Man), Analog Man Comprossor, Electro-Harmonix Micro POG, BBE Tremor Tremolo, DigiTech Whammy II, Line 6 DL4 Delay Modeler (mod by Alchemy Audio), Keeley Katana Clean Boost, Boomerang III Phrase Sampler. All pedals are powered by a Voodoo Lab Pedal Power Mondo (isolated power).
Martin Cheney: Old Faithful
Here’s my main board. Some of the pedals are more than 20 years old, including an original Pedal Power. The top level is on hinges, which allows me to access the NS-2 and power cords. The outlet on the Pedal Power allows me to plug in the adaptors for the DigiTech Whammy and TC Electronic RPT-1 Nova Repeater.
The Boss TU-2 and NS-2 have the “power out” option. The NS-2 powers the Boss GE-7 EQ and the TU-2 powers the Xotic SP Compressor and wah. At the moment, I’m using a Moen Jimi Zero Vibe as my modulation, but I have another board almost identical to this (without the volume pedal and whammy), which has a Boss flanger and phaser so I can swap those in and out.
A few years back I was trying to figure out how to make my tone better without buying new pedals, so I bought mod kits from Monte Allums and they turned our great—with thanks to some help from my dad, who is great with electronics. We also did the true-bypass mod on both of my wah pedals.
I just measured it out and bought the wood from a hardware store and spray-painted it flat black.
This is my chain: Ernie Ball Volume, Boss TU-2 Tuner, DigiTech Whammy, Dunlop Cry Baby Wah (true-bypass + vocal mod; a small knob on the side can adjust one of the internal resistors), and Boss Noise Suppressor.
• Loop Send: Xotic SP Compressor, Moen UL-VB Jimi Zero Vibe, Boss Metal Zone (Monte Allums mod), Boss Blues Driver (Monte Allums mod), and Boss Distortion (Keeley mod).
• Loop Return: Boss Tremolo (Monte Allums mod), TC Electronic RPT-1 Nova Repeater, DOD DFX9 Digital Delay, and Boss GE-7 EQ (Monte Allums mod).
Matt Beatty: Mini to Main
There’s nothing really special about my board, but what I pride myself in is that I welded it myself with scrap metal from work, so it cost me nothing. The expanded metal allows for cables to be run above or below the board and makes for one sturdy, rugged board.
My mini-board started when my girlfriend began buying the Ibanez mini series pedals for me, just for her love of “all things mini.” I then welded a “mini” board to house these awesome tiny creations, which so far include an Ibanez Tube Screamer Mini, Ibanez Super Metal Mini, MXR Phase 95, and Ibanez Analog Delay mini. Soon enough, my mini board may become my main board. Cheers from Canada!
Mike Simpson: Overdrive Champion
I play in an ’80s and ’90s dance band and a ’70s hard-rock band, so I needed a board that would handle everything for both types of music. The real champ of the board is the Friedman BE-OD. It’s the best distortion pedal I’ve ever used.
My pedalboard consists of the following: Chemistry Design Werks Holyboard (painted by my kids), Morley Bad Horsie 2, Electro-Harmonix POG2, Line 6 M9 Stompbox Modeler, MXR EVH90 Phase 90, DigiTech Bad Monkey, DigiTech Whammy 5, Friedman BE-OD, two Dunlop Volume X Mini pedals (one for volume, one for expression for the Line 6 M9), and a Big Joe Power Box.
Mike Svensson: Three Pedals and the Truth
Hi from Sweden! My board is straightforward and houses very few things. I’ve had basically the same pedal setup for the last 15 years. All pedals go through the effects loop of my amp in this order: Boss TU-3 tuner (only used as a mute when swapping between guitars), Dunlop Cry Baby Wah, original DigiTech Whammy WH-1 (I have five of these), two Boss DD-3 delays (I could get by with one, but live it’s easier not changing settings too much), a DOD FX40B Equalizer (set flat and only used as a boost for solos), and finally the MXR Phase 90 (which I don’t really use).
I only use three pedals frequently: wah, Whammy, one DD-3. The EQ isn’t really an “effect.” I recently tried to use a Keeley Mini Katana Clean Boost in place of the EQ, but I changed back. I’m a creature of habit, and while the Katana served well, it wasn’t the same. I’ve tried every Whammy model except for the newest DT and WH-5 models. Nothing comes close to the original, both in terms of sound and ease of use. My current wah is a new unit, but my favorite is an ’80s model which sounds much better than any other Cry Baby I’ve tried. I keep that on my backup board (identical to this one, except it houses only one delay). The sweep is much cleaner, smoother, and never gets too high. Unfortunately, it isn’t very reliable to use live, but I always record with it.
Nathan Hall: Tidy Tone
Hi Premier Guitar! My board and I come from Maine. This fairly compact (for me) setup gives me everything I need for playing blues and classic rock at jams and home practice. The Temple Audio board is new to me. I’m loving the departure from Velcro and the tidy system, which enables using mounting plates or zip ties. I use Monster and George L cables, and my signal path is as follows: Real McCoy Custom Picture Wah, TC Electronic PolyTune, Fulltone Supa-Trem, MXR EVH Phase 90, Xotic EP Booster, Xotic AC Booster Comp, Fulltone OCD, Xotic RC Booster V2, TC Electronic Ditto Looper. My wah is powered by a 9V battery; everything else is powered by a Voodoo Lab Pedal Power 2, mounted underneath. I usually play a Gibson Les Paul Traditional goldtop into a Marshall DSL50 and 1936 2x12 cab with Celestion Greenbacks.
Roshan Vasudev: The Brain
Here's my baby! I've been playing for years and just couldn't find “my sound" or get organized with all the various combinations of pedals and tones. I was searching for good quality pedals that would make my tone as sweet as Steve Rothery's or Steven Wilson's. I remembered the amazing Rig Rundown video of Steven Wilson's board, and that got me going. I started with a Strymon TimeLine and quickly added the BigSky, then snuck in the Providence when I saw that on one of Guthrie Govan's boards. I also came across That Pedal Show, which sucked me in entirely (hours of videos and reviews to sink my ears into)!
I also started to search for a “brain" to help calm the “pedalboard tap dance," and thanks to PG reviews and an amazing video by Pete Thorn on the RJM Mastermind, I was immediately hooked! So, I decided to abandon all those old cheap pedals and embark on a much more rewarding (and wallet-emptying) endeavor.
Here are the pieces that make this board sing: Electro-Harmonix Nano POG, Xotic SP Compressor, Xotic EP Booster, Boss BD-2 Blues Driver, Thorpy FX Muffroom Cloud (Fallout Cloud), TC-Helicon VoiceTone Harmony-G XT, Providence Anadime Chorus, Pigtronix Rototron, Strymon TimeLine, Strymon BigSky, Lehle Mono Volume Pedal, and Roland EV-5 Expression Pedal.
They're all controlled by “the brain"—RJM Music's Mastermind PBC.
Wesley Farmer: Pedal Dancer
At first glance, this pedalboard might look complicated, but it’s not too complex compared to other boards I’ve seen. I wanted a board that could get me pretty much any tone for the different styles of music I play the most (alternative, classic rock, blues, Americana, prog, and ambient), and the pedals had to be easy to use while still being quality. I made sure no pedal had more than four to five knobs, to keep things as simple as possible.
Here’s the signal path: Boss FV-500H Volume Pedal, DigiTech Whammy (4th gen), Dunlop Cry Baby Wah, Electro-Harmonix Micro POG, Electro-Harmonix Soul Preacher Compressor/Sustainer, MXR Phase 90, Ibanez TS808 Tube Screamer, JHS Angry Charlie V3, Vox Satchurator, Electro-Harmonix Big Muff Pi, TC Electronic PolyTune 2, Boss CH-1 Super Chorus, MXR Micro Flanger, Boss TR-2 Tremolo, Boss DD-7 Digital Delay (with Quik Lok PS-10 pedal for tap tempo), TC Electronic Shaker Vibrato, Strymon Lex Rotary, TC Electronic Flashback Delay, Boss RV-6 Reverb, TC Electronic Hall of Fame Reverb, and a JHS Little Black Buffer (under the board). Also pictured is the footswitch to a Fender ’65 Princeton Reverb Reissue.
Pedals are on the Pedaltrain Classic Pro, patch cables are all from Hosa, and the board is powered by the Truetone 1 Spot Pro CS12. My board was built by Jordan McCown at Mountain Music Exchange in Pikeville, Kentucky. He does great work! Time to do the pedal dance…
“Practice Loud”! How Duane Denison Preps for a New Jesus Lizard Record
After 26 years, the seminal noisy rockers return to the studio to create Rack, a master class of pummeling, machine-like grooves, raving vocals, and knotty, dissonant, and incisive guitar mayhem.
The last time the Jesus Lizard released an album, the world was different. The year was 1998: Most people counted themselves lucky to have a cell phone, Seinfeld finished its final season, Total Request Live was just hitting MTV, and among the year’s No. 1 albums were Dave Matthews Band’s Before These Crowded Streets, Beastie Boys’ Hello Nasty, The Miseducation of Lauryn Hill, Korn’s Follow the Leader, and the Armageddonsoundtrack. These were the early days of mp3 culture—Napster didn’t come along until 1999—so if you wanted to hear those albums, you’d have to go to the store and buy a copy.
The Jesus Lizard’s sixth album, Blue, served as the band’s final statement from the frontlines of noisy rock for the next 26 years. By the time of their dissolution in 1999, they’d earned a reputation for extreme performances chock full of hard-hitting, machine-like grooves delivered by bassist David Wm. Sims and, at their conclusion, drummer Mac McNeilly, at times aided and at other times punctured by the frontline of guitarist Duane Denison’s incisive, dissonant riffing, and presided over by the cantankerous howl of vocalist David Yow. In the years since, performative, thrilling bands such as Pissed Jeans, METZ, and Idles have built upon the Lizard’s musical foundation.
Denison has kept himself plenty busy over the last couple decades, forming the avant-rock supergroup Tomahawk—with vocalist Mike Patton, bassist Trevor Dunn (both from Mr. Bungle), and drummer John Stanier of Helmet—and alongside various other projects including Th’ Legendary Shack Shakers and Hank Williams III. The Jesus Lizard eventually reunited, but until now have only celebrated their catalog, never releasing new jams.
The Jesus Lizard, from left: bassist David Wm. Sims, singer David Yow, drummer Mac McNeilly, and guitarist Duane Denison.
Photo by Joshua Black Wilkins
Back in 2018, Denison, hanging in a hotel room with Yow, played a riff on his unplugged electric guitar that caught the singer’s ear. That song, called “West Side,” will remain unreleased for now, but Denison explains: “He said, ‘Wow, that’s really good. What is that?’ And I said, ‘It’s just some new thing. Why don’t we do an album?’” From those unassuming beginnings, the Jesus Lizard’s creative juices started flowing.
So, how does a band—especially one who so indelibly captured the ineffable energy of live rock performance—prepare to get a new record together 26 years after their last? Back in their earlier days, the members all lived together in a band house, collectively tending to the creative fire when inspiration struck. All these years later, they reside in different cities, so their process requires sending files back and forth and only meeting up for occasional demo sessions over the course of “three or four years.”
“When the time comes to get more in performance mode, I have a practice space. I go there by myself and crank it up. I turn that amp up and turn the metronome up and play loud.” —Duane Denison
the Jesus Lizard "Alexis Feels Sick"
Distance creates an obstacle to striking while the proverbial iron is hot, but Denison has a method to keep things energized: “Practice loud.” The guitarist professes the importance of practice, in general, and especially with a metronome. “We keep very detailed records of what the beats per minute of these songs are,” he explains. “To me, the way to do it is to run it to a Bluetooth speaker and crank it, and then crank your amp. I play a little at home, but when the time comes to get more in performance mode, I have a practice space. I go there by myself and crank it up. I turn that amp up and turn the metronome up and play loud.”
It’s a proven solution. On Rack—recorded at Patrick Carney’s Audio Eagle studio with producer Paul Allen—the band sound as vigorous as ever, proving they’ve not only remained in step with their younger selves, but they may have surpassed it with faders cranked. “Duane’s approach, both as a guitarist and writer, has an angular and menacing fingerprint that is his own unique style,” explains Allen. “The conviction in his playing that he is known for from his recordings in the ’80s and ’90s is still 100-percent intact and still driving full throttle today.”
“I try to be really, really precise,” he says. “I think we all do when it comes to the basic tracks, especially the rhythm parts. The band has always been this machine-like thing.” Together, they build a tension with Yow’s careening voice. “The vocals tend to be all over the place—in and out of tune, in and out of time,” he points out. “You’ve got this very free thing moving around in the foreground, and then you’ve got this very precise, detailed band playing behind it. That’s why it works.”
Before Rack, the Jesus Lizard hadn’t released a new record since 1998’s Blue.
Denison’s guitar also serves as the foreground foil to Yow’s unhinged raving, as on “Alexis Feels Sick,” where they form a demented harmony, or on the midnight creep of “What If,” where his vibrato-laden melodies bolster the singer’s unsettled, maniacal display. As precise as his riffs might be, his playing doesn’t stay strictly on the grid. On the slow, skulking “Armistice Day,” his percussive chording goes off the rails, giving way to a solo that slices that groove like a chef’s knife through warm butter as he reorganizes rock ’n’ roll histrionics into his own cut-up vocabulary.
“During recording sessions, his first solo takes are usually what we decide to keep,” explains Allen. “Listen to Duane’s guitar solos on Jack White’s ‘Morning, Noon, and Night,’ Tomahawk’s ‘Fatback,’ and ‘Grind’ off Rack. There’s a common ‘contained chaos’ thread among them that sounds like a harmonic Rubik’s cube that could only be solved by Duane.”
“Duane’s approach, both as a guitarist and writer, has an angular and menacing fingerprint that is his own unique style.” —Rack producer Paul Allen
To encapsulate just the right amount of intensity, “I don’t over practice everything,” the guitarist says. Instead, once he’s created a part, “I set it aside and don’t wear it out.” On Rack, it’s obvious not a single kilowatt of musical energy was lost in the rehearsal process.
Denison issues his noisy masterclass with assertive, overdriven tones supporting his dissonant voicings like barbed wire on top of an electric fence. The occasional application of slapback delay adds a threatening aura to his exacting riffage. His tones were just as carefully crafted as the parts he plays, and he relied mostly on his signature Electrical Guitar Company Chessie for the sessions, though a Fender Uptown Strat also appears, as well as a Taylor T5Z, which he chose for its “cleaner, hyper-articulated sound” on “Swan the Dog.” Though he’s been spotted at recent Jesus Lizard shows with a brand-new Powers Electric—he points out he played a demo model and says, “I just couldn’t let go of it,” so he ordered his own—that wasn’t until tracking was complete.
Duane Denison's Gear
Denison wields his Powers Electric at the Blue Room in Nashville last June.
Photo by Doug Coombe
Guitars
- Electrical Guitar Company Chessie
- Fender Uptown Strat
- Taylor T5Z
- Gibson ES-135
- Powers Electric
Amps
- Hiwatt Little J
- Hiwatt 2x12 cab with Fane F75 speakers
- Fender Super-Sonic combo
- Early ’60s Fender Bassman
- Marshall 1987X Plexi Reissue
- Victory Super Sheriff head
- Blackstar HT Stage 60—2 combos in stereo with Celestion Neo Creamback speakers and Mullard tubes
Effects
- Line 6 Helix
- Mantic Flex Pro
- TC Electronic G-Force
- Menatone Red Snapper
Strings and Picks
- Stringjoy Orbiters .0105 and .011 sets
- Dunlop celluloid white medium
- Sun Studios yellow picks
He ran through various amps—Marshalls, a Fender Bassman, two Fender Super-Sonic combos, and a Hiwatt Little J—at Audio Eagle. Live, if he’s not on backline gear, you’ll catch him mostly using 60-watt Blackstar HT Stage 60s loaded with Celestion Neo Creambacks. And while some boxes were stomped, he got most of his effects from a Line 6 Helix. “All of those sounds [in the Helix] are modeled on analog sounds, and you can tweak them endlessly,” he explains. “It’s just so practical and easy.”
The tools have only changed slightly since the band’s earlier days, when he favored Travis Beans and Hiwatts. Though he’s started to prefer higher gain sounds, Allen points out that “his guitar sound has always had teeth with a slightly bright sheen, and still does.”
“Honestly, I don’t think my tone has changed much over the past 30-something years,” Denison says. “I tend to favor a brighter, sharper sound with articulation. Someone sent me a video I had never seen of myself playing in the ’80s. I had a band called Cargo Cult in Austin, Texas. What struck me about it is it didn’t sound terribly different than what I sound like right now as far as the guitar sound and the approach. I don’t know what that tells you—I’m consistent?”
YouTube It
The Jesus Lizard take off at Nashville’s Blue Room this past June with “Hide & Seek” from Rack.
Nashville's historic Gruhn Guitars give PG an exclusive look at a very early amp that is a piece of rock history that preceded the heralded JTM45. Amp builder and reverb aficionado Eric Borash of Ebo Sounds shares his expertise on this rare amp's lineage, while John Bohlinger plugs in Dan Auerbach's old '60s ES-335 to test it out.
Metallica's M72 World Tour will be extended into a third year with 21 North American shows spanning April, May, and June 2025.
The M72 World Tour’s 2025 itinerary will continue the hallowed No Repeat Weekend tradition, with each night of the two-show stands featuring entirely different setlists and support lineups. These will include the band’s first Nashville shows in five years on May 1 and 3 at Nissan Stadium, as well as Metallica’s return to Tampa after 15 years on June 6 and 8 at Raymond James Stadium. M72 has also confirmed its much anticipated Bay Area hometown play, to take place June 20 and 22 with the band’s debut performances at Levi's Stadium in Santa Clara.
In a new twist, M72 2025 will feature several single shows bringing the tour’s full production, with its massive in-the-round stage, to venues including two college football stadiums: JMA Wireless Dome in Syracuse, New York on April 19, and Metallica's first ever visit to Blacksburg, Virginia, home of the Virginia Tech Hokies. The May 7 show at Lane Stadium will mark the culmination of 20+ years of “Enter Sandman” playing as the Hokies take the field.
In addition to playing football stadiums across the nation, the M72 World Tour’s 2025 itinerary will also include two festival headlines—the first being the opening night of the run April 12 at Sick New World at the Las Vegas Festival Grounds. May 9 and 11 will then mark a festival/No Repeat Weekend combo as Metallica plays two headline sets at Sonic Temple at Historic Crew Stadium in Columbus, Ohio.
Support on M72’s 2025 North American run will come from Pantera, Limp Bizkit, Suicidal Tendencies and Ice Nine Kills. See below for specifics.
Additionally, M72 2025 will see Metallica’s long-awaited return to Australia and New Zealand.
M72’s 2025 North American leg is produced by Live Nation and presented by new sponsor inKind. inKind rewards diners with special offers and credit back when they use the app to pay at 2,000+ top-rated restaurants nationwide. The company provides innovative financing to participating restaurants in a way that enables new levels of sustainability and success. Metallica fans can learn more at inkind.com.
Citi is the official card of the M72 tour. Citi cardmembers will have access to presale tickets beginning Tuesday, September 24 at 10am local time until Thursday, September 26 at 10pm local time through the Citi Entertainment program.
Verizon will offer an exclusive presale for the M72 tour in the U.S through Verizon Access, just for being a customer. Verizon Access Presale tickets for select shows will begin Tuesday, September 24 at 10am local time until Thursday, September 26 at 10pm local time.
* Citi and Verizon presales will not be available for Sick New World, Sonic Temple or the Toronto dates. Verizon presale will not be available for the Nashville, Blacksburg or Landover shows.
As always, a portion of proceeds from every ticket sold will go to local charities via the band’s All Within My Hands foundation. Established in 2017 as a way to give back to communities that have supported Metallica over the years, All Within My Hands has raised over $15 million – providing $8.2 million in grants to career and technical education programs including the ground-breaking Metallica Scholars Initiative, now in its sixth year, over $3.6 million to combat food insecurity, more than $3.5 million to disaster relief efforts.
For more information, please visit metallica.com.
Metallica M72 North America 2025 Tour Dates
April 12 Las Vegas, NV Sick New World @ Las Vegas Festival Grounds
April 19 Syracuse, NY JMA Wireless Dome *
April 24 Toronto, ON Rogers Centre *
April 26 Toronto, ON Rogers Centre +
May 1 Nashville, TN Nissan Stadium *
May 3 Nashville, TN Nissan Stadium +
May 7 Blacksburg, VA Lane Stadium *
May 9 Columbus, OH Sonic Temple @ Historic Crew Stadium
May 11 Columbus, OH Sonic Temple @ Historic Crew Stadium
May 23 Philadelphia, PA Lincoln Financial Field +
May 25 Philadelphia, PA Lincoln Financial Field *
May 28 Landover, MD Northwest Stadium *
May 31 Charlotte, NC Bank of America Stadium *
June 3 Atlanta, GA Mercedes-Benz Stadium *
June 6 Tampa, FL Raymond James Stadium +
June 8 Tampa, FL Raymond James Stadium *
June 14 Houston, TX NRG Stadium *
June 20 Santa Clara, CA Levi's Stadium +
June 22 Santa Clara, CA Levi's Stadium *
June 27 Denver, CO Empower Field at Mile High +
June 29 Denver, CO Empower Field at Mile High *
* Pantera and Suicidal Tendencies support
+ Limp Bizkit and Ice Nine Kills supp
Beetronics FX Tuna Fuzz pedal offers vintage-style fuzz in a quirky tuna can enclosure.
With a single "Stinker" knob for volume control and adjustable fuzz gain from your guitar's volume knob, this pedal is both unique and versatile.
"The unique tuna can format embodies the creative spirit that has always been the heart of Beetronics, but don’t let the unusual package fool you: the Tuna Fuzz is a serious pedal with great tone. It offers a preset level of vintage-style fuzz in a super simple single-knob format. Its “Stinker” knob controls the amount of volume boost. You can control the amount of fuzz with your guitar’s volume knob, and the Tuna Fuzz cleans up amazingly well when you roll back the volume on your guitar. To top it off, Beetronics has added a cool Tunabee design on the PCB, visible through the plastic back cover."
The Tuna Fuzz draws inspiration from Beetronics founder Filipe's early days of tinkering, when limitedfunds led him to repurpose tuna cans as pedal enclosures. Filipe even shared his ingenuity by teachingclasses in Brazil, showing kids how to build pedals using these unconventional housings. Although Filipe eventually stopped making pedals with tuna cans, the early units were a hit on social media whenever photos were posted.
Tuna Fuzz features include:
- Single knob control – “Stinker” – for controlling output volume
- Preset fuzz gain, adjustable from your guitar’s volume knob
- 9-volt DC operation using standard external power supply – no battery compartment
- True bypass switching
One of the goals of this project was to offer an affordable price so that everyone could own a Beetronicspedal. For that reason, the pedal will be sold exclusively on beetronicsfx.com for a sweet $99.99.
For more information, please visit beetronicsfx.com.