Don’t let the Sitar pedal handle mislead you—this thing is a deep bag of tricks and treats.
Less-than-hip cats and kitties might dismiss the mystic drones and mysterious melodic power of the sitar as synonymous with flower power and Bollywood kitsch. But those in the know—the enlightened so to speak—know this foundation of Indian classical music is an instrument of magnificent emotive power.
Electro Harmonix’s Ravish Sitar pedal may not transform your guitar into a totally authentic-sounding sitar. But it can do many magical and unexpected things that can add an Eastern flavor to your jams as well as lend cool sympathetic-tone ambiance and tone tweaking options in any musical context. Don’t let the Sitar pedal handle mislead you—this thing is a deep bag of tricks and treats.
Bombay the hard Way
The Ravish Sitar (which probably less-than-coincidentally bears a name a little
like Ravi Shankar’s) is compact and cool
looking in a mint-green 5 7/16" x 4 7/16"
box that’s resplendent in subtle paisley and
Taj Mahal graphics. And by some sleight of
graphic-design hand, the pedal doesn’t look
too busy, even though it features six knobs,
two footswitches, nine LEDs, and an LCD
readout—quite a feat by the EHX design
department.
The Ravish is as festooned with knobs and lights as it is because it does a lot. And charging into use of this pedal without consulting the manual is ill-advised for all but the most fearless. But it doesn’t take long to grasp the essence of what this pedal does and move into some more unusual applications of its capabilities.
The first three knobs on the left control levels for the Dry (unaffected signal), the Lead (plucked sitar-string signal, which is a mirror image of the dry signal) and Sympathetic signal, which emulates the sounds of ringing, sympathetic strings on a sitar or tamboura. The two black knobs directly to the right of the level knobs adjust the timbre of the Lead and Sympathetic signals—adding what EHX calls buzz—which most often seems like a bump in the high-mid range. The white knob at the far right of the pedal doubles as a push-switch enabling one to select Key mode, Decay settings for the lead voice, and Modulation rate for the sympathetic strings. From the Modulation mode you can also select the voice of the Lead and Sympathetic tones in a range from sharp and synthetic, to more natural. Apart from the Bypass footswitch, there’s also a footswitch that enables you to select presets or hold the sympathetic strings in a drone, over which you can solo or play melodies.
The Key mode itself enables you to tailor the tone for a given tone by selecting the scale that makes up the sympathetic tone. And the four LEDs, just below the LCD readout (which displays the root note), show if you’ve dialed up a sharp of the raised root, or a major, minor, or exotic scale, which is based on the Hindustani Bhairava scale—essentially a major scale with a flat second and flat sixth.
Raga in a Box…and Beyond
The Ravish’s manual provides a quick-start
guide with settings that, presumably, were
selected for being most naturally sitar-like—Dry at 2 o’ clock, Lead at noon,
Sympathetic at noon, Lead timbre at 3
o’clock, and Sympathetic timbre at 11
o’clock. Though with these settings, and
a Rickenbacker 330 and a Fender Twin
Reverb in the signal chain, the Ravish
sounded much more like an electric sitar
accompanied by a keyboard synth in the
Sympathetic section. If this has negative
connotations, it shouldn’t. It’s a cool sound,
especially with a little delay and reverb
on the receiving end, and it sounds pretty
sweet in a loose and swinging, jazzy context
(provided you’re not too puritanical about
such things).
Those seeking a more organic, sitar emulation will likely be more satisfied by kicking up the Dry level a touch, backing off the levels of the Lead and Sympathetic, and tailoring the timbre controls to best suit a given guitar’s voice. At these settings, the digital coloration of the sympathetic strings is much less evident. And the more natural sound, with the additional dry signal, lends a gentler contour to the Lead signal.
The Ravish is much more than just sitar emulations. Dialing back the Lead level and timbre, and boosting the levels for Sympathetic tones and Dry signals can provide chords with a lush, undulating, organlike sympathetic wash that can be dialed into a slow, Leslie-like swell depending on how you set the modulation. Here again, a touch a reverb and a little delay can make your guitar sound larger than life. The converse approach—where the Sympathetic signal is pulled back and the Lead signal is boosted—yields a funky, synth-like attack that Funkadelic might have killed for.
Unlike a traditional sitar/tamboura relationship, you aren’t locked into a single key with the Ravish. Key transpositions can be handled with the Preset switch when a root note is programmed via the presets. And the presets themselves, which can be customized (and stored), enable you to move to the extreme-end of the pedal’s capabilities in a single song by transforming a simple one-chord jam from bland to mindbending. By adding a second amp and routing your Sympathetic output through a phaser, things can still get weirder and more interstellar.
The Verdict
Players that are dying to incorporate the
sound of the sitar into their tone palate may
not ever outnumber fuzz fans. But those
that pass over the Ravish for fear that it’s a
one-trick pony will miss out on a pedal that
adds much more than just classical, East
Indian textures. Like all the best Electro-Harmonix pedals over the years, this one
awards adventurous tweaking. But even in
its most basic and obvious applications, it
can turn a run-of-the-mill verse, chorus,
bridge, lead, or guitar harmony into something
hooky and extraordinary. And while
it’s not going to fool anyone familiar with
the sound of a real sitar—like an electric
sitar, it has a cool voice all its own. It’s good
to know that Electro-Harmonix hasn’t lost
the thirst to build effects that break from
the pack, and with the Ravish Sitar they did
not go halfway either. Guitar-sound twisters
and exotically minded sonic explorers everywhere
have cause to celebrate.
Buy if...
your quest to escape electric guitar convention points to Mumbai and beyond…
Skip if...
your tastes don’t move much beyond blues-rock.
Rating...
Street $239 - Electro-Harmonix - ehx.com |
Stompboxtober continues! Enter below for your chance to WIN today's featured pedal from LR Baggs: The Align Series Reverb! Come back each day during the month of October for more chances to win!
LR Baggs Align Reverb Acoustic Reverb Pedal
The Align Series Reverb was built from the ground up to complement the natural body dynamics and warmth of acoustic instruments that we love so much. The circuit seamlessly integrates the wet and dry signals with the effect in side chain so that it never overwhelms the original signal. We shaped the reverb with analog EQ to reflect the natural voice inherent in acoustic instruments. Additionally, the tone control adds versatility by sweeping from warm and muted to open and present. The result is an organic reverb that maintains the audiophile purity of the original signal with the controls set in any position.
Fuchs Audio introduces the ODH Hybrid amp, featuring a True High Voltage all-tube preamp and Ice Power module for high-powered tones in a compact size. With D-Style overdrive, Spin reverb, and versatile controls, the ODH offers exceptional tone shaping and flexibility at an affordable price point.
Fuchs Audio has introduced their latest amp the ODH © Hybrid. Assembled in USA.
Featuring an ODS-style all-tube preamp, operating at True High Voltage into a fan-cooled Ice power module, the ODH brings high-powered clean and overdrive tones to an extremely compact size and a truly affordable price point.
Like the Fuchs ODS amps, the ODH clean preamp features 3-position brite switch, amid-boost switch, an EQ switch, high, mid and low controls. The clean preamp drives theoverdrive section in D-Style fashion. The OD channel has an input gain and outputmaster with an overdrive tone control. This ensures perfect tuning of both the clean andoverdrive channels. A unique tube limiter circuit controls the Ice Power module input.Any signal clipping is (intentionally) non-linear so it responds just like a real tube amp.
The ODH includes a two-way footswitch for channels and gain boost. A 30-second mute timer ensures the tubes are warmed up before the power amp goes live. The ODH features our lush and warm Spin reverb. A subsonic filter eliminates out-of-band low frequencies which would normally waste amplifier power, which assures tons of clean headroom. The amp also features Accent and Depth controls, allowing contouring of the high and low response of the power amp section, to match speakers, cabinets andenvironments. The ODH features a front panel fully buffered series effects loop and aline out jack, allowing for home recording or feeding a slave amp. A three-position muteswitch mutes the amp, the line out or mute neither.
Built on the same solid steel chassis platform as the Fuchs FB series bass amps, the amps feature a steel chassis and aluminum front and rear panels, Alpha potentiometers, ceramic tube sockets, high-grade circuit boards and Neutrik jacks. The ICE power amp is 150 watts into 8 ohms and 300 watts into 4 ohms, and nearly 500 watts into 2.65 ohms (4 and8 ohms in parallel) and operates on universal AC voltage, so it’s fully globallycompatible. The chassis is fan-cooled to ensure hours of cool operation under any circumstances. The all-tube preamp uses dual-selected 12AX7 tubes and a 6AL5 limiter tube.
MAP: $ 1,299
For more information, please visit fuchsaudiotechnology.com.
Cort Guitars introduces the GB-Fusion Bass Series, featuring innovative design and affordable pricing.
Cort Guitars have long been synonymous with creating instruments that are innovative yet affordably priced. Cort has done it again with the GB-Fusion Bass series. The GB-Fusion builds upon Cort’s illustrious GB-Modern series and infuses it with its own distinctive style and sound.
It starts with the J-style bass design. The GB-Fusion features a solid alder body – the most balanced of all the tonewoods – providing a fantastic balance of low, mid, and high frequencies. The visually stunning Spalted maple top extends the dynamic range of the bass. A see-through pickguard allows for its spalted beauty to show through. The four-string version of the GB-Fusion is lacquered in a supreme Blue Burst stained finish to show off its natural wood grain. The five-string version features a classic Antique Brown Burst stained finish. A bolt-on Hard maple neck allows for a punchier mid-range. An Indian rosewood fretboard with white dot inlays adorns the 4-string Blue Burst version of the GB-Fusion with an overall width of 1 ½” (38mm) at the nut, while the GB-Fusion 5 Antique Brown Burst features a Birdseye Maple fretboard with black dot inlays and an overall width of 1 7/8” (47.6mm) at the nut. Both come with glow in the dark side dot position markers to help musicians see their fretboard in the dark. The headstock features Hipshot® Ultralite Tuners in classic 20:1 ratio. They are cast of zinc with aluminum string posts making them 30% lighter than regular tuners providing better balance and tuning accuracy.
Cort’s brand-new Voiced Tone VTB-ST pickups are the perfect J-style single coil with clear and robust bass sounds and classic warmth. The GB-Fusion comes with a 9-volt battery-powered active preamp to dial in the sound. With push/pull volume, blend knob, and 3-band active electronics, players can access a wide array of tones. The MetalCraft M Bridge is a solid, high-mass bridge. It provides better tone transfer and makes string changes easy. Strings can be loaded through the body or from the top giving players their choice of best string tension. The MetalCraft M4 for 4-string has a string spacing of 19mm (0.748”) while the MetalCraft M5 is 18mm (0.708”). Speaking of strings, D’Addario® EXL 165 strings complete the GB-Fusion 4. D’Addario EXL 170-5SL strings complete the GB-Fusion 5.
Cort Guitars prides itself on creating inventive instruments musicians love to play. The GB-Fusion Bass Series is the latest and greatest for musicians looking for a stellar bass guitar that is not only economical, but has the reliable robust sound needed to hold up the back end in any playing situation.
GB-Fusion 4 Street Price: $699.99
GB-Fusion 5 Street Price: $849.99
For more information, please visit cortguitars.com.
Here’s a look under the hood of the funky rhythm-guitar master’s signature 6-string.
Hello and welcome back to Mod Garage. Since we’re still celebrating the 70th birthday of the Stratocaster, this month we will have a look under the hood of the Fender Cory Wong model to see just what’s so special about it. (I can tell you—it’s special!)
Guitarist, songwriter, and producer Cory Wong is renowned for his solo work, his band Fearless Flyers (with Mark Lettieri, Joe Dart, and Nate Smith), and collaborations with artists such as Vulfpeck, Jon Batiste, and Dave Koz. His playing style is deeply rooted in funk rhythm guitar, with a heavy dose of rock and jazz. Well-known for playing a Stratocaster, his signature model was released in 2021, and it’s a unique offering. If you want to build your personal Cory Wong Strat, here is your shopping list, starting with the primary structure:
• Alder body, scaled down to slightly smaller than a regular Stratocaster, with Fender American Ultra body contours
• Maple neck with a rosewood fretboard with rolled edges, modern Fender American Ultra D neck profile, slightly larger headstock, 25.5" scale, 10" to 14" compound radius, 22 medium jumbo frets
• Locking tuners with all short posts, a bone nut, and two roller string trees
• Vintage-style 6-screw synchronized tremolo
• Hair tie around the tremolo springs (which mutes them to enhance the rhythm tone)
• .010–.046 strings (nickel-plated steel)
“While these are all interesting features, resulting in a very comfortable guitar, you don’t need to copy every detail to transform one of your Stratocasters into a Cory Wong-style Strat.”
For the physical build, as you can see, Wong and Fender created a real signature instrument to his specs and wishes. While these are all interesting features, resulting in a very comfortable guitar, you don’t need to copy every detail to transform one of your Stratocasters into a Cory Wong-style Strat. My personal favorite of these is the hair tie for muting the tremolo springs. A lot of my funk-playing customers are doing similar things on their Strats to get a dry sound, and they’re using all kinds of funny things in there, like foam, rubber bands, and pieces of cotton, as well as hair ties.
Now, let’s have a look at the electronics:
• Seymour Duncan Cory Wong Clean Machine SSS pickup set
• Standard 5-way pickup-selector switch with classic Strat switching matrix
• 250k master volume pot with a 90/10 audio taper and Fender treble-bleed circuit PCB
• 250k tone pot with a 90/10 audio taper and Fender Greasebucket tone control PCB for only the neck pickup
• 250k audio push-push tone pot with Fender Greasebucket tone control PCB for only the bridge pickup; the push-push switch overrides the 5-way switch and defaults to middle + neck pickup (in parallel) as a preset
• Middle pickup is without tone control
Let’s break this down piece-by-piece to decode it:
Pickups
The pickup set is a custom SSS set from the Seymour Duncan company with the following specs:
• Overwound hum-canceling stacked bridge pickup with a 3-conductor wire and shield in permanent hum-canceling mode (red wire taped off), bevelled alnico 5 magnets, approximately 14.5k-ohm DCR
• Overwound middle single-coil, RWRP, beveled alnico 4 magnets, approximately 7.1k-ohm DCR
• Overwound neck single-coil, bevelled alnico 4 magnets, approx. 7.0k-ohm DCR
The pickups are voiced for clear highs, which perfectly suits Wong’s funky playing style and tone. While a lot of pickup companies will have pickups in that ballpark, it will be difficult to put together a full set that really works as intended. The Duncans in the Cory Wong Strat are available as a balanced set, so if you want to get as close as possible, I think this is your best bet.
5-Way Pickup Selector Switch
Nothing special here, just the standard 5-way switch with two switching stages that is wired like a classic Stratocaster:
bridge
bridge + middle in parallel
middle
middle + neck in parallel
neck
The upper tone pot is assigned to the neck pickup, while the lower tone pot is connected to the bridge pickup, leaving the middle pickup without tone control.
Master volume pot and treble-bleed circuit.
The 250k master volume pot is a standard CTS pot with a 90/10 audio taper found in all U.S.-made Fender guitars. The volume pot has the treble-bleed circuit from the Fender American Pro series, but uses a ready-to-solder PCB from Fender instead of individual electronic parts. The PCB is available from Fender individually (part #7711092000), but I have some thoughts about it. While using a PCB makes a lot of sense for mass production, it has some downsides for us mortal human beings:
• Soldering on PCBs requires some training and also special soldering tools.
• The PCB is quite expensive, while the individual electronic parts are only a few cents.
• The PCB uses ultra-tiny surface-mount parts, so it’s very difficult to repair or mod it to your personal taste.
I don’t think we need a PCB for adding a treble-bleed circuit, so let’s do this project using conventional electronic parts. The treble-bleed PCB contains a 1200 pF capacitor with a 150k-ohm resistor in parallel, plus another 20k-ohm resistor in series. Using individual parts, it looks like this:
Courtesy of single-coil.com
In general, a treble-bleed circuit will help you to combat the “volume vs. tone problem” when using passive single-coil pickups. When you turn down the volume (even just a bit), the high end or treble loss is not proportionate. In other words, a small cut in volume creates a far greater loss in your guitar’s treble response. Using a treble-bleed circuit is an easy way to get rid of this problem, as long as it is calculated carefully.
ONLINE ONLY: If you want to find out more about treble bleed circuits please have a look here: https://www.premierguitar.com/diy/mod-garage/treble-bleed-mod
Next month, we will continue with part two of the Cory Wong Stratocaster wiring, bringing it all together, so stay tuned!
Until then ... keep on modding!