"Creed and Alter Bridge guitarist Mark Tremonti took the stage with his solo project, playing a brand new PRS given to him by Paul. Onstage with Tremonti was his newest touring band member: Wolfgang Van Halen, who is touring with Tremonti while the Van Halen tour is on hold."
The TikTok star goes legit on his latest tour with some plum Strats, a Two-Rock, and a masterbuilt pedalboard.
When Ty Myers got injured a few years back and couldn’t play sports, he took to posting videos of himself on TikTok. Before long, his song “Tie That Binds” went viral on the platform, blasting him to overnight-star status. Now, with his debut album, The Select, under his belt, the 18-year-old is taking his songs on the road to packed-out rooms.
PG’s John Bohlinger linked with country’s newest wunderkind at the Egyptian Room in Indianapolis to see how he brings his old-time-meets-new-world country to life onstage.
This FenderStratocaster, the first nice guitar Myers bought himself, was purchased from a guy in a Home Depot parking lot in San Antonio, Texas. Myers swapped in Fender Custom Shop Fat ’50s pickups, and he strings it with Stringjoy .010s.
Eye-Catching Custom
If Myers played slide, it’d be with this Custom Shop Master Built Strat, built by Dale Wilson. He went to Carter’s Vintage in Nashville with another instrument in mind, but this one caught his eye, and he had to have it. He kept the pickups it came with, and pretty soon he intends to have the action lowered.
Barry’s Bond
Myers got his first Gibson SJ-200 around the age of 10, and this one, a gift from label executive Barry Weiss, is his current go-to. It’s got an LR Baggs pickup system and goes direct to front-of-house.
Package Deal
Myers’ biggest hero is John Mayer, so it tracks that he went after this Two-Rock Silver Sterling Signature. He saw this one at Carter the same day he bought his Custom Shop Strat, and didn’t even plug it in—he just bought it along with the Master Built.
Ty Myers’ Pedalboard
Myers’ stomp station was built by the pedal professors at XAct Tone Solutions in Nashville. After the Dunlop Volume (X) Mini and the Peterson StroboStomp LE, Myers’ signal hits an Origin Effects Cali76, JHS Pedals Berkeley, Keeley Katana, Analog Man/Boss GE-7, Greer Lightspeed, MXR Duke of Tone, Browne Amplification Protein, Keeley Noble Screamer, Boss VB-2w, Boss TR-2, JHS Flight Delay, and EarthQuaker Devices Dispatch Master. A Strymon Zuma and Strymon Ojai keep the lights on.
Gibson commemorates 50 years in Nashville with an unexpected, limited edition evolution of their understated Marauder.
For 50 years, Gibson has been proud to call Nashville home, shaping sound, supporting the artists who make our community special, and crafting the guitars that have defined generations of music. Now, we’re honoring that legacy with something new. Introducing the Les Paul Music City Special – 50th Anniversary, a tribute to where we’ve been and a celebration of where the music will lead next.
The Music City Special – 50th Anniversary is an updated, modern twist on two historical Gibson models, taking much of its inspiration from the 70s-era Marauder, with a touch of the Music City Junior in its DNA. Over the years, the Marauder has been used by artists from Adam Jones to Paul Stanley. This unique commemorative model pays tribute to the early days of Gibson’s Nashville production and celebrates Gibson’s 50 years of producing world-class guitars in Music City while delivering outstanding value to modern players.
The high-powered Southern rockers return for a full-on Rig Rundown.
From couchsurfing to playing the Ryman, rockers Whiskey Myers of Palestine, Texas, have had one hell of a Cinderella story. We caught up with guitarist John Jeffers back in 2021 for a virtual Rig Rundown, but this time around, ahead of the September release of their seventh LP, Whomp Whack Thunder, PG’s Chris Kies met up with Jeffers and rhythm guitarist Cody Tate before their July 19 gig at Nashville’s Ascend Amphitheater to get a tour of their latest and loudest noisemakers.
This ’90s GibsonLes Paul is Jeffers’ most treasured guitar, gifted to him by Tate’s uncle—an avid collector—before he passed away. It’s loaded with a DiMarzio Super Distortion and a “Jeff Beck” pickup, which is how it came to Jeffers. He strings it with .0105s.
Murphy Magic
This 1960 Les Paul reissue was hand-painted by Gibson’s custom-shop whiz, Tom Murphy.
Flavor of the Night
Jeffers has long been a Vox AC30 Hand-Wired player, but recently he’s been throwing Oranges into the mix, including a Custom Shop 50. He’ll decide night-to-night which amp he wants to go with. The Voxes have Weber Silver Bell and Blue Dog speakers, and the Orange has Celestion Vintage 30s.
John Jeffers’ Pedalboard
After a Lehle volume pedal, Jeffers stomp station has a Boss TU-3w, a Dunlop wah, PCE-FX Aluminum Falcon, Union Tube and Transistor More, Empress Compress Mk II, Interstellar Octonaut Hyperdrive, Boss BF-2, EarthQuaker Devices The Depths, two Skreddy Echos, and a Hermida Audio reverb. Jeffers jumps around them all with a Voodoo Lab PX-8 PLUS True Bypass Programmable Pedal Switcher.
Guitar Center Special
Tate calls this FenderStratocaster a “Guitar Center special,” which he’s had for 15 years now. It’s mostly stock, save for some custom wiring. He plays it with Ernie Ball Slinkies, mostly in the middle position for rhythm playing.
Brown Beauty
Tate fell in love with this heavily modded Strat when he saw it on Reverb, and he had to pull the trigger. He’s not sure what the pickups are—especially the Gretsch Filter’Tron-style bridge unit—but it’s got the signature Strat bounce with a bit of extra grease.
Marshall Law
Tate runs two Marshall JCM800s, one 50-watt and one 100-watt, through four custom cabs loaded with Weber 12" speakers.
Cody Tate’s Pedalboard
Cody’s board is slightly more restrained than Jeffers’. It includes some of the same units, including a Boss TU-3w, Dunlop wah, and Empress Compressor Mk II, plus a JHS Unicorn, Prestige, and Morning Glory. A Boss ES-5 handles the switching.
Frontwoman Jessica Dobson plunges into the depths of her Benson-powered road rig.
Seattle indie rockers Deep Sea Diver released their fourth full-length record, BillboardHeart, earlier this year via Sub Pop, and their supporting cross-country tour took them to downtown Nashville’s Blue Room at Jack White’s Third Man Records.
PG’s Chris Kies connected with singer and guitarist Jessica Dobson in 2020 for a virtual Rig Rundown, but this time we get a close-up, in-person look at Dobson’s tour kit, including her signature Benson stomp box and a custom guitar.
Dobson picked up this slick Bilt S.S. Zaftig to replace her beloved but terribly heavy Fender Starcaster. This one has Lollar Regal Wide-Range humbuckers in it.
Regrets, I’ve Had a Few
Dobson purchased this used Fender Elvis Costello Jazzmaster in 2010, and has since met the person who sold it—and totally regrets it. It’s strung with D’Addario .011–.052s, and tuned to E standard.
Blue Benz
U.K.-based builder Elliott Trent modeled this custom Trent guitar for Dobson on her mother’s old blue Mercedes, and loaded it with P-90s.
Benson Boom Box
Dobson’s amp of choice, taped to perfection, is this 30-watt Benson Chimera 2x12 combo.
Jessica Dobson’s Pedalboard
Dobson runs a busy board powered by a Voodoo Labs Pedal Power 2 Plus and operated via a Boss ES-8. There’s also her signature Benson Deep Sea Diver, plus a Benson Germanium Preamp, JHS Pulp N Peel, Sarno Music Solutions Earth Drive, Benson Germanium Boost, EHX Deluxe Memory Man, Strymon blueSky, EHX POG2, Chase Bliss Brothers Analog Gainstage, and Menatone Pleasure Trem 5000, plus a TC Electronic PolyTune 2 Noir.
An American icon: a 1959 narrow-panel tweed Fender Deluxe—a model that’s been used on recordings by John Lennon, Mike Campbell, Don Felder, John Fogerty, and many others.
Photo courtesy of Richard’s Gear Bazaar/Reverb
The longtime author of PG’s popular Ask Amp Man column—and one of the godfathers of the low-power-amp revolution with Budda and then EAST—returns to outline everything you need to know about tracking down the valve-propelled sound machine of your dreams.
In the immortal words of the Byrds:
“So you want to be a rock and roll star? / Then listen now to what I say. Just get an electric guitar / then take some time and learn how to play.”
But you’re also going to need an amplifier! And if you’re following the Byrds’ protocol, you want a tube amp. These are the amps that voiced all the classic music that made history and still stands the test of time. Finding your ideal tube amp can be a never-ending search, but here are a few tips that may help you get started in your search for tube-amp nirvana.
What do you expect from your amp? Do you want the amp to have a good clean sound as well as the gain you need for solos? If so, then you may want an amp with channel switching, enabling you to footswitch between beautiful clean rhythms and a powerful overdriven solo assault. Some control options to look for here: Does the amp have the ability to alter the tone of the clean and overdrive channels? Sometimes the two channels sound noticeably different, depending on the amp design. Some form of tone control—typically 2- or 3-band EQ—for each channel can help. Also, an added bonus might be a separate master volume control for the clean channel. This would allow you to crank up the gain to give you some nice crunch for your rhythm playing, while setting your overall crunch volume to match the overdrive channel.
This 1981 Mesa/Boogie Mark II B is a good example of a fixed-bias amp. Just install the right replacement tubes and you’re ready to flip the on switch.
Photo courtesy of L.A. Vintage Gear/Reverb
If you get most of your tones from pedals or maybe a multi-effects unit, then you probably won’t need channel switching and you may be best served with an amplifier that has a single channel and a simple control set. In this case, less is more, and the cleanest signal path will give your effects the opportunity to shine. A volume control and some form of tone shaping are all you’ll probably need. A good thing to remember is that many amps that have a lot of front-end gain don’t leave a lot of headroom for pedals. You might want to ask: “Does this amp take pedals well?”
“A tube amp is like a car; occasionally, it will need service.”
Know the difference between gain and volume. A gain control typically controls the amount of gain developed in the front end or preamp section of the amp. This is where most of the overdrive in the amp is developed. The volume control sets the overall loudness of the amp. A low-gain, high-volume setting equals a cleaner tone. A high-gain, low-volume setting equals a more overdriven tone. This is not the only way, however, to get an overdriven sound from an amplifier. Pushing the output tubes into distortion is also an option and has often been done both onstage as well as in the studio. So next….
Photo 1. The four basic types of output tubes: 6L6, 6V6, EL34, and EL84. The first two were typically used in American amps of the ’60s and ’70s; the latter two, in their European counterparts.
Consider the output power of the amplifier based on where you might be playing it. Most of us, nowadays, don’t need a 100-watt amp, or even a 50-watt amp, to play most venues. I currently play an EAST Duality 30—a 30-watt amp with a half-power mode, and 90 percent of my gigs are done at half power—with a six-piece band with two guitar players. It really doesn’t make sense to pay the increased cost of a 100- or 50-watt amp if you’re never going to need all that power. Tube amplifiers sound the best when the output tubes are being pushed a bit ... or a lot! In fact, many classic solos were done in the studio with a low-powered amp pushed to its limits. Fender tweed Champs and tweed Deluxes seem to shine at this, although there are definitely a few Gibson amps from the ’50s and ’60s that will give them a run for the money! If you happen to encounter a ’50s or ’60s tweed Fender or a Gibson, I would suggest plugging in. Are you gonna get Metallica? No. Are you gonna get Neil Young? All day long! The Fenders of this era have been pretty costly for a while now, but the Gibsons seem to be just catching up. Would these be good as a first amp and give you everything you want? In most instances, no, but as you get some time under your belt as a guitar player, you may appreciate these for what they are. They actually do become another instrument under your control.
“The option of different speaker cabinets with different speakers and configurations can go a long way to tailoring your sound to the gig and venue.”
There is no “best” amp, just the best amp for you! So what output tubes should you consider? Let’s get familiar with the basic types of output tubes first; then we can explore how they’re different. In Photo 1, we see the four basic types of output tubes: 6L6, 6V6, EL34, and EL84. The first two were typically used in the American-produced amps of the ’60s and ’70s. The latter two were their counterparts (more or less) and used in European amps built during this period. After a while, they started to cross pollinate and, especially in the U.S., you could find amps being built with all of these types of tubes. Because of that, you need to take into consideration what type of material you play, as they each have their own tonal characteristics.
If you’re into a classic rock or blues tone, that tone typically has more pronounced midrange content. This, in a broad-stroke kind of way, typically comes from an EL84- or an EL34-based amplifier. These output tubes typically have a more prominent and smooth midrange. If you’re more into hard rock/metal tones, a 6V6- or a 6L6-based amp may serve you better, as these output tubes typically have less midrange content with a more present top and bottom end, making it easier to establish the mid-scoop sound necessary for this music.
Hybrid amplification started with the Music Man line of amplifiers in the ’60s, which had a solid-state preamp and a tube output stage. This example is a 212 65 model from 1977.
Photo courtesy of DBM Gear Outlet/Reverb
What about hybrid amps? There are some amps out there that only have a tube or tubes in some part of their design. As far as I know, this started with the Music Man line of amplifiers in the ’60s, which had a solid-state front end and a tube output stage. Later, Fender and Marshall started offering amps with one preamp tube in the preamp stage with all other stages of the front end and output stage being solid-state. These amps certainly have less maintenance involved regarding tube replacement and can sound fine if they give you the sound you’re looking for, but personally I don’t categorize these as tube amps.
“An open-back speaker cabinet or combo will tend to fill the area around it with a more ambient type of sound, almost 3-D.”
And speaking of maintenance. A tube amp is like a car; occasionally, it will need service. Output tubes are the tubes that wear out sooner and will need to be replaced more often than preamp tubes. These are the tubes that run the hottest and provide the power to the speaker through an output transformer. Depending on the time of use as well as amount of volume, a typical rule of thumb for replacement of output tubes is six months to two years. That’s not to say that I haven’t seen tubes last 30 years, but if you’re gigging a good bit, you want your amp to be reliable. Another point to be aware of here is that most tube amps will require new output tubes to be biased when installed in the amp. There are exceptions, however. Many amps that use EL84-style output tubes are designed with what’s called cathode bias or self-biasing, where the circuit allows the tubes to find their own bias point. Other amps, such as most Mesa/Boogies, are designed with what’s known as a fixed-bias circuit, so no bias adjustment is possible. This is why they recommend purchasing only their branded output tubes, because they are selected to run within their chosen bias range. Personally, I have seen and serviced many amps with a variable bias control added so that any brand of tube can be properly biased. Either way, your amp may occasionally need a trip to your local experienced tube amp tech for a tube replacement, bias, and overall checkup. It’s worth it to keep it at the top of its game.
The author’s current favorite is one of his own EAST 30s, which he plays with a six-piece band that includes two guitarists.
Do you want a head or a combo? A combo is the easiest transportation option. If, say, you live in a city and you believe most of your gigs will require a grab-n-go option, a cab or Uber ride to the gig will be best served with your guitar in one hand and your amp in the other. If, on the other hand, you have the option of packing your own vehicle, you may want to consider a head and cabinet. Having this setup leaves you many options with regard to speakers and cabinets. While the amplifier is substantially responsible for your overall tone, the option of different speaker cabinets with different speakers and configurations can go a long way to tailoring your sound to the gig and venue. One thing to consider here is that because of all the internal vibration that occurs in a combo, it may require more frequent replacement of the tubes. Tubes are, after all, an electro-mechanical device, and vibration can affect their structural integrity.
“If you get most of your tones from pedals or maybe a multi-effects unit, then you probably won’t need channel switching and you may be best served with an amplifier that has a single channel and a simple control set.”
An open- or closed-back speaker cabinet? This choice can go a long way to getting the sound you’re looking for. An open-back speaker cabinet or combo will tend to fill the area around it with a more ambient type of sound, almost 3-D. This is especially great in a lower-powered amp, because it will help fill the stage without being overly loud. These typically don’t have much in the way of low-end sound. If you’re looking for that low-end thud, then you definitely need to focus on a closed-back cabinet. A closed-back cabinet is also much more directional, as all of the sound is coming directly from the front of the cabinet.
To loop or not to loop? Although this pertains to solid-state amps as well, it’s worth addressing here as it applies to tube amps. As I mentioned above, if you get most of your sounds from pedals or multi-effects, then you may not need an effects loop because all your overdrive, fuzz, compression, and time-based units such as chorus, delay, flange, phase, etc., are all hitting your amp through the guitar input on the front panel. If you prefer to get both your clean and overdriven sounds primarily from the amp, then you’re more than likely using a channel-switching amp. In this case, you should definitely look for an effects loop option. The reason being that the sound of time-based units changes drastically when the overdrive channel of an amp is engaged. The extra gain almost always overexaggerates the level of these effects to the point where they become overwhelming. With these types of amps, any of your gain-based units (fuzz, overdrive, compression, boost) can be connected to the guitar input of the amp, but all of your time-based units should be connected through the effects loop. The level of the signal is typically much more consistent here, so the effects levels should not vary much.
While early Fender amps have long been pricey entries in the vintage market, Gibson models, like this GA-19RVT Falcon, are just catching up.
Photo courtesy of Hear the Rooster Crow LLC/Reverb
Hand-wired or circuit board? This is a question that you may not have even thought of, and that’s just fine. Some folks may prefer one over the other, so let’s take a minute to explore both. Of course, the first amplifiers ever built were hand-wired because circuit boards did not exist in the ’30s and ’40s. All the resistors and capacitors were soldered directly to a chassis-mounted component or to a chassis-mounted terminal strip. As time went on, eyelet boards and terminal boards were developed so that components could be mounted directly to these boards, and then wire leads would be used to connect these boards to all the chassis-mounted components such as the pots, tube sockets, jacks, etc. This is how all the early Fender and Gibson amps were built. Then came circuit boards, where not only the components were mounted but a good bit of the wiring itself was part of the board in the form of circuit traces, which are actually flat copper wire attached to the board itself. The earliest examples of circuit board amps I can remember were the early ’60s Ampeg amps. Nowadays, most amps are built using circuit-board technology because it can largely be automated, with everything from component placement through soldering being done by machines.
So what’s the difference? Some players feel that a hand-wired amp just sounds better. Some feel they’re more reliable. Some feel that circuit board amps are more consistent from amp to amp because the build is exactly the same each time. All this can be true, but the bottom line is that it’s not all that important. The fact that is important remains if it’s the right amp for you. When you plug into the amp, do you hear what you want to hear? Does it make youwant to play? Are you struggling to find a sound, or does it easily get you where you want to be? These are the most important things to ask yourself. Price point is probably next, but if it’s an amp that you really bond with, and it lets you get the sound you hear in your head, then it’s probably the amp for you!
