
Tired of playing the same old dominant 7 chords during a blues? Let’s fix that.
Intermediate
Intermediate
- Learn what chord substitutions are and how they work so that you can get more color out of your rhythm guitar playing.
- Use extensions on dominant 7 chords as a way of creating new substitutions.
- Play practical examples of substitutions within various blues grooves while maintaining the standard blues harmony.
Staying creative and phrasing musically while playing chords, especially over a blues progression, seems like an impossibility to many players. After all, most blues songs contain only three chords, the I, IV, and V. So how can you make those simple chords more interesting? The answer is by using chord substitution.
Substitution is when two chords share enough notes in common that by exchanging one for the other, the overall harmonic function remains unchanged, but the color and very often the melodic nature of the chords is enhanced. By adding extensions to standard dominant 7 chords found in a blues, you can see a whole new world of substitutions become available. No longer will you be stuck playing two or three shapes for an A7 chord, but rather you’ll be equipped with a massive palette of colorful chords that will catapult your blues playing to another dimension!
Dominate the Minor Subs
Most players are familiar with playing dominant 9 chords; they are, after all, very commonly used in many genres of music, especially the blues. The most common form of this chord can be found in the first measure of Ex. 1. This A9 chord contains the five notes of a dominant 9: 1– 3–5–b7–9 … or in terms of note names: A–C#–E–G–B.
The 9 in the A9 chord is considered an extension because it takes the foundation of the dominant 7 chord (1–3–5–b7) and “extends” it by an extra third, creating the 9. In measure 2 you can see that removing the root note (A) will leave you with a four-note chord: C#–E–G–B. This coincidentally is the exact spelling of a C#m7b5 chord. Yes, this means that within an A9 is a C#m7b5.
By removing the root note of an extended dominant chord you are left with a new chord that can easily be substituted in place of the original dominant 7. This means that in nearly every circumstance you can substitute a m7b5 chord for a dominant 7 because within the dominant 9 version of that chord lies the corresponding m7b5. In order to transpose this to any key, you simply build a m7b5 chord upon the 3 of the dominant 7, as seen in measures 3 and 4. C# is the third of A7 and so you can substitute a C#m7b5 for any A7 and it will retain the function of the A7.
Ex. 2 highlights this in the context of the first four measures of a blues in A. The first two measures are a standard A7 riff, however measures 3 and 4 utilize the m7b5 substitution. In this case the C#m7b5 is used to create harmonic and even melodic variety by sliding in and out of the chord from a half-step below. This is a common technique in jazz-blues playing.
Summary: Extending a dominant 7 to a dominant 9 creates a m7b5 chord built on the 3 of the dominant chord. Playing this m7b5 chord in place of the original dominant 7 is harmonically acceptable because it is implying the dominant 9 tonality, even without the root note being present.
Dominant 13 Chords
Following this concept of extending chords, a dominant 13 chord is another common variation of a dominant 7. Unlike piano players, guitarists don’t have the luxury of playing with all 10 fingers, so we must make exceptions. A fully extended dominant 13 chord would contain all seven notes of a key: 1–3–5–b7–9–11–13. Since we are limited in the number of notes we can realistically play, it’s important that we cut out unnecessary notes. It’s very common to cut out the 5, 11, and even the 9, leaving the chord spelled as: 1–3–b7–13.
In the beginning of Ex. 3 you can see a standard A7 chord voicing. There is only one note difference between this voicing and the A13 chord found in measure 2. Namely the E (5) located on the 2nd string. By removing this note and replacing it with an F# (13) we have essentially created an A13 chord.
If desired, playing the 9 as part of this A13 is always an option (A–C#–G–B–F#). In measure 3 you can see this A13 chord, but it is often cumbersome to play while including the bass note. Removing that root note will leave you with a b7–3–13–9 shape. Just as removing the root in an A9 chord left us with a C#m7b5, removing the root note of this A13 leaves us with a new four-note chord: Gmaj7#11. This may seem like a complicated way of saying “A13 with no root note,” but it goes to show you that the substitutions for a dominant 7 chord can be profound.
In Ex. 4 you can see the first six measures of an blues in A with the addition of a Gmaj7#11 in measures 3 and 4. Measure 5 introduces a D9 which is then substituted with an F#m7b5, recapping the first substitution we discussed (building a m7b5 upon the third of any dominant 7 chord).
Summary: Dominant 13 chords are most often played on guitar without the 5, 11 and occasionally the 9. However, swapping the 9 for the root creates: 3–b7–9–13. By making the b7 the new “root note” of this substitution chord you create a major7#11. An easy way to implement this into your everyday playing is by building a maj7#11 chord on the b7 of any dominant chord. In the case of an E7 you would substitute a Dmaj7#11 which would create the same harmonic function as an E13.
“Hendrix” Chord Subs
Just as the name implies, a dominant #9 chord is a dominant 7 chord, with a #9 extension. Commonly known as the “Hendrix” chord, this is a very useful extension for any dominant 7. The interesting thing about this chord is that the #9 is also the same tone as a b3. The reason for it being called a #9 is that in a dominant chord, there is already a 3, and it’s major! Since you can’t theoretically have both a 3 and a b3 in a chord, that b3 must be called a #9 instead (this is called enharmonic spelling).
Looking at Ex. 5 you can see an E9 which is spelled as E–G#–D–F#. Notice the conspicuous lack of a 5. This is very common in many chords because the 5 adds nothing harmonically to the chord. In measure 2 the F# is moved up a half-step to create an E7#9 chord. In measure 3 you can see another extension added to the E7#9; it would be the #5 added by barring the fourth finger across the top two strings at the 8th fret. This is another very common extension and one that creates a new substitution when the root note is removed.
The spelling of the E7#9#5 is: E–G#–D–F##–B#. Why B#? Well because it is a #5 it must be called B#. B is the fifth of E and a #5, according to enharmonic spelling, means that it must be called a B#.
Compare the chord shape in measure 4 to the chord shape of the Gmaj7#11 from the previous example. That’s right, it’s the exact same chord shape! This means that by playing an E7#9#5 and removing the root note, you are left with a G#maj7#11…I told you extensions can lead to profound new substitutions!
Ex. 6 outlines a typical blues turnaround. The standard turnaround being E7–D7–A7–E7, this version begins by using an E7#9 in place of an E7. This upper note then descends chromatically to form an E9 on beat four and then to a D7#9. Next is a standard blues walk-up which takes you to the E bass note at the beginning of measure four. However, the ending of measure 4 introduces the G#maj7#11 which is the substitution for an E7#9#5.
Summary: Adding a #9 to a dominant 7 chord creates the common “Hendrix” tonality that allows players more freedom to solo. However, barring the fourth finger across the top two strings creates another extension, the #5. This chord, E7#9#5, when played without a root note is spelled as G#–D–F##–B#. This spelling creates a G#maj7#11.
Dominant 7b9 Chords
One of the most versatile dominant chords imaginable is the dominant 7b9 chord. Just as the name suggests, it is nearly identical to a dominant 9 chord except in this case, the 9 is flatted by one half-step, hence the name “dominant 7b9”.
Looking at Ex. 7 you can see a D9 chord in measure 1 spelled out from 5th string to 1st as: D–F#–C–E–A. In measure 2 is a D7b9 chord spelled out as: D–F#–C–Eb–A. There is only one note difference between these two, but that b9 makes a huge difference in the function of this chord.
Moving on to measure 3, we remove the root note and end up with a F#dim7. Here is where things get really interesting. Diminished 7 chords are symmetrical, meaning they are comprised entirely of minor thirds. The notes of this F#dim7 chord are: F#–C–Eb–A. Now if you move this same chord shape up a minor third on the fretboard (three frets) you’ll get an Adim7 chord. The spelling for this chord is: A–Eb–F#–C. That’s right, it’s the exact same set of notes in another inversion. Move it up another minor third and you get Cdim7 and one more minor third will get you Ebdim7.
Essentially, all these diminished 7 chords can be considered a substitute for a D7b9 because they all share the same exact set of notes—minus the D root note. The implications of this are enormous because now the option to play diminished scales and chords can be easily superimposed on top of any dominant 7 chord.
A great way to conceptualize this while playing is to first become familiar with the chord shapes for diminished 7 chords so you can easily finger them in the midst of a song. Then simply look for any of the following four notes within a dominant 7 chord: 3–5–b7–b9 and build your diminished 7 chord on one of those tones. From there you are free to move that chord shape up and down in minor third intervals and you’ll retain that dominant 7b9 harmony the entire time.
Look at Ex. 8 and you’ll see a full 12-bar blues progression in A that uses the sub techniques we’ve covered so far. I’ll point out a few things to take note of. In measure 6 the F#dim7 is moved up a minor third to Adim7 and then to Cdim7. These two measures are utilizing the harmonic function of a D7b9 without the root note.
Going into measure 8, the diminished 7 substitution is once again present, but this time it’s used in place of the A7 chord normally found in this measure. In place of an A7 we are substituting a C#dim7 followed by a Bbdim7 and a Gdim7. Remember this diminished 7 chord substitution works on the 3–5–b7–b9 of any dominant chord. In this case, these three diminished 7 chord substitutions are built on the 3, b9, and b7 of A7b9.
The final measure introduces another of the substitutions we’ve discussed, the maj7#11. In this case the Dmaj7#11 is substituted for the E7 that normally occurs in this bar. This Dmaj7#11 functions as the upper structure of an E13 chord, without the root note.
Summary: Dominant 7b9 chords are essentially equivalent to a diminished 7 chord. By removing the root note of a dominant 7b9 (1–3–5–b7–b9) chord you are left with a diminished 7 chord which is symmetrical and can be moved up or down in minor thirds. This diminished 7 chord can be built on the 3–5–b7–b9 of any dominant chord and will retain that dominant 7 function, albeit with much more tension and color.
Admittedly, there’s a lot of info here, so don’t feel like you need to hop on all of these ideas at once. Pick one, try it out, explore it, and maybe even write a tune with it. Only then will it become a part of your vocabulary. Good luck!
Adding thoughtful features not seen on a Klon-style circuit before, the Voyager MKII gets five variations of overdrive texture selectable by rotary, and a foot-switchable parametric midfrequency EQ.
"The year 2011 was a big one with memorable events like Prince William and Kate’s wedding, “Party Rock Anthem” was everywhere, but maybe the most relevant to you since you’re reading this, was the birth of effect pedal creators, Walrus Audio. With only a couple of employees and a tiny shop, Walrus burst into the guitar effects world with their first pedal, the Voyager Overdrive, turning heads of guitarists like Joe Bonamassa, Ed O’Brien, and Nels Cline."
The five-way rotary switch includes the following modes:
1: Classic 1N34A Germanium Diodes (most compressed). This is the original Voyager sound.
2: Classic 1N34A Germanium Diodes with bass boost (trust us).
3: Symmetric Silicon Diodes (more open and dynamic).
4: Asymmetric Silicon Diodes (least compressed, open & driven).
5: Asymmetric Silicon Diodes with bass boost (least compressed, open & driven with a bass boost.)
External updates include top-mounted jacks, and true bypass, soft-touch relay switches. The Voyager MKII is available in two different versions:
1. Seafoam with black ink and the Voyager satellite illustrated by original Voyager artist, Nathan Price.
2. Matte black with cream ink and space helmet illustrated by Christi Du Toit. The die-cast enclosure’s exact size is 4.77” x 2.6” x 1.39” including knobs. Power requirements are 9VDC, center negative (100mA minimum).
Walrus Audio is offering The Voyager MKII for a retail price of $249.99 and is available now at walrusaudio.com.
The effect of ecommerce on CopperSound's shipping room.
Our columnist ponders the business-to-consumer model, and how the design of online stores might be more crucial to the stompbox industry than we’d like to admit.
Let’s open things up with a TV/movie trope. The character on screen has a speech that they’ve been preparing for once they’re called up onstage to address the audience. When they finally get up to the lectern to deliver it, they pause, give the attendees a look over, and rip up their script in a dramatic fashion before pursuing an off-the-cuff, heartfelt message that goes on to invigorate the crowd and inspire a roaring ovation. For right now—I’m at least doing the first part of that. I’m abandoning my planned topic. Consider this me ripping up my finely curated index cards.
Before sitting down at the computer, I was thinking about the title of this column—“State of the Stomp.” Perhaps I’m being a bit too on-the-nose, but I started to ask myself, “What is the state of the stompbox world?” As in, this niche section inside of this niche industry that we find ourselves traversing. But, I can only speak for myself and what I’ve experienced firsthand and heard secondhand. That being said, let’s chat about the current state of the stompbox world.
This year marks my 10-year anniversary in the boutique-effects world. In speaking to the state of affairs in those 10 years, I’ve witnessed trends, domestic growth, international growth, product collaborations, companies closing doors, others opening doors, dealer decline, e-commerce growth, and more. The last, e-commerce, is the current state that we find ourselves in—an ever-growing, bustling digital presence that brings with it the B2C (business-to-consumer) model.
This isn’t completely new terrain for us by any stretch. It is, however, something that was only a minor percentage of our business. I have often referred to our sales as being 80 percent dealer and 20 percent direct. I would say that was the case from 2014 to 2020, but over the last few years the dealer vs. direct numbers have pretty much flipped.
Why has it flipped in favor of direct sales? That’s a simple yet complex question that would rob me of sleep if I let it. I would also frame the question in the inverse: “Why have dealer orders and reorders slowed down?” Market oversaturation? Economy? I would find it difficult to imagine that economic changes haven’t been trolling consumer purchasing. Us manufacturers know that it has directly impacted raw materials. As a niche corner of the MI world, that’s scary. Especially when you’re a manufacturer of nonessentials. When essentials go up in cost, it doesn’t feel great, but more easily gets shrugged off. When nonessentials go up, purchases of them get scaled back or hauled off completely.
“Why has it flipped in favor of direct sales? That’s a simple yet complex question that would rob me of sleep if I let it.”
In conversations I’ve had with industry colleagues, there’s almost a universal trend—sales are slow. This brings us back to the “why?” A place that my company finds itself in right now is close to the opposite. We are swamped with direct orders and dealer orders. However, of all the direct and dealer orders that we have been flooded with since May, 90 percent or more are for our DIY offerings. A big reason for this is due to the fact that the DIY market is smaller than standard pedals, we offer tools that don’t already exist, and the pricing is very attractive.
In May, “Short Circuit” launched. A recurring segment on the ever-popular JHS Show on YouTube, “Short Circuit” features founder Josh Heath Scott explaining effects-circuit basics while breadboarding them—using our DIY products. This, along with giveaways and kit collaborations between CopperSound and JHS, has led to a huge sales influx in what the community has coined “the JHS effect.”
I also find it important to highlight that my affinity for the brick and mortar has not diminished. But I will say that their ability to offer an array of gear from various manufacturers feels like a double-edged sword. If a particular store carries 20 brands, they can more easily give appropriate attention to each brand and subsequent model they stock. This includes website pictures, videos, copy, and SEO for each product. Now, if that same store expands to 200 brands, the bandwidth for each product gets significantly decreased.
So, while that dealer has 200 brands to focus on, we, the manufacturer, only have ourselves, making it easier for us to tend to our website. In a world where 70-plus percent of consumers shop online, it really makes me wonder if this is the make-or-break factor when it comes to where and how people choose to do that shopping.
And now, I’d like to thank you all for the standing ovation in response to my inspiring, off-the-cuff speech.
Loud, evil, searing hot, and unexpectedly versatile, the Fuzz War’s demented bass cousin has a bold and more-complex personality all its own that sounds radical with guitar, too.
Evil. Just plain evil. Unexpected and vast variation. Responds interestingly to bass volume and tone attenuation. Wet/dry mix control. Sounds amazing (and extra evil) with guitar.
None.
$195
Death By Audio Bass War
deathbyaudio.com
If you like your fuzz measured in megatonnage, the Death By AudioFuzz War is one of life’s great joys. And if you’re a bass player with similar predilections and accustomed to watching guitar players have all the fun, the new DBA Bass War will be sweet revenge.
The original Fuzz War is a creatively twisted derivative of the Colorsound Supa Tone Bender But while you can hear some family resemblance among the Tone Bender, the Fuzz War, and Bass War, the latter is a very different animal indeed. I’m pretty sure it’s louder than the Fuzz War (holy #@*!). The fuzz is also much brighter than a Fuzz War, which sounded positively muddy by comparison.
That means a bass player has lightyears of headroom and range within which to shape their tone. And for such a loud, hectic pedal, it can be really precise and surgical. The experience of reshaping fuzz sounds is made easier, more fun, and much more expressive for the oversized outboard tone and fuzz controls, which can be swept with your toe to achieve wild filter effects. Along with the cutting fuzz tonalities, that lends the Bass War an almost synth-like feel and functionality. The pedal also responds in interesting ways to bass volume and tone attenuation: Lower bass volume generates less compressed, more focused, but still very insane tones that can be boosted to superheated levels with the pedal’s volume knob. Add in the dry/wet mix knob, which lends exponentially more complexity and range to the Bass War’s voice, and you’re talking about an exceedingly varied and evil fuzz device. Oh ... it sounds freaking amazing with guitar, too—yielding psychotically piercing lead tones, vintage biker fuzz, and vicious punk and metal grind. Wow.
Originally introduced in 1975 as part of the Schaffer-Vega Diversity System (SVDS) wireless system, this mini boost pedal originated from a 1/4” headphone jack intended for monitoring purposes.
"The SVDS Boost is a recreation of one of the first full-frequency boosts ever used on stage."
Originally introduced in 1975 as part of the Schaffer-Vega Diversity System (SVDS) wireless system, this mini boost pedal originated from a 1/4” headphone jack intended for monitoring purposes. However, guitarists and bassists soon discovered an unexpected benefit: by connecting their instruments to the headphone output, they could boost their signal by up to 30dB.
Legendary guitarists like Angus Young, David Gilmour, Eddie Van Halen, Carlos Santana, and more utilized this technique. The SVDS Boost is a faithful reproduction of this iconic boost, which may very well be the first full-frequency boost ever heard on stage.
The Sound
Unlike typical clean boosts, the SVDS Boost adds vintage coloration and harmonics that instantly transport you to the golden era of rock. The unique "Goalpost" EQ design enhances the extreme ends of the frequency spectrum, while maintaining the integrity of your mid-range. With up to 30dB of boost, the SVDS unlocks new tonal possibilities, delivering rich harmonics, singing sustain, and even controlled feedback.
Pedal
Placement The SVDS Boost truly shines when placed after other overdrive, distortion, or fuzz pedals, adding dynamic response and restoring low-end fidelity that can often be lost with mid-boost pedals. Its ability to enhance your existing gear is unparalleled, making your guitar, amp, and pedals sound better than ever.
Build
Quality Precision-built using high-quality components, the SVDS Boost is designed to withstand the rigors of professional touring. Its robust construction ensures years of reliable performance, whether in the studio or on the road.
Availability
The SVDS Boost is now available at solodallas.com and authorized SoloDallas dealers worldwide.
Price: $129 USD.