
Back to the Water Below is out September 8. Watch the video for "Mountains at Midnight" now.
Royal Blood announce the September 8 release of their fourth album Back To The Water Below and share its lead single “Mountains At Midnight”. Listen HERE.
Throughout, their story has been one of independence. Relying on their friendship and intuitive musicianship to guide them through as they were catapulted into theaters and arenas around the world, favoring working independently away from prying eyes rather than enlisting the help of the latest big-name co-writer. Their victories have come from hard work, prodigious songwriting, fierce performances, and a smidgeon of good fortune. That spirit of independence continues into Back To The Water Below, which saw them self-produce an entire album for the very first time. It was a process which cancelled out the noise of any external influences, while also allowing them the convenience to write at their own studio in Brighton whenever inspiration struck.
They discovered that the best ideas were the result of following their instincts — their unspoken, subconscious connection honed over the course of 15 years playing music together. Just as importantly, they cast aside any preconceptions of what Royal Blood should be. They allowed themselves the freedom to embrace other ideas, at times being guided by melodies rather than riffs and rhythms, and in others deploying whatever instrumentation they felt best complemented the songs. If in doubt, they remembered a nugget of advice offered by Rick Rubin – that the sound of Royal Blood isn’t defined by genre or the instruments that they play, but by the unique chemistry forged by the two friends.
Royal Blood - Mountains at Midnight (Official Video)
But as the single “Mountains At Midnight” proves, sometimes the result was a fresh take on the old school Royal Blood prototype – albeit with a supercharged rush. As we’ve come to expect, Mike Kerr inventively layers a heavyweight wall-of-sound solely with his bass, while Ben Thatcher’s rhythms simultaneously swing with a spacious groove while pummelling us into submission. Meanwhile, Mike’s lyrics complement the song’s ominous, foreboding ambiance with vehement menace: “I’m a ticking timebomb hooligan come to light your fuse / 24-carat thug in a velvet glove.”
Elsewhere, Royal Blood present plenty of surprises without ever compromising the essence of their identity. “Shiner In The Dark” sets a rock ‘n roll swagger to the tight, danceable rhythms that defined the 2021 album Typhoons. Devoid of distortion, “The Firing Line” represents a bigger departure, its ‘90s alt-rock tone and an underbelly of psychedelia later elevated by a chiming piano melody. “Pull Me Through” goes further still, uniting the plaintive piano that fans loved in the live favourite “All We Have Is Now” with a full-blooded denouement. They’re also songs which will not only provide a broader spectrum of moods for live shows, but that will offer the dynamic contrast to amplify the power of their most fiery moments.
'Back to the Water Below' Tracklist
1. Mountains At Midnight
2. Shiner In The Dark
3. Pull Me Through
4. The Firing Line
5. Tell Me When It’s Too Late
6. Triggers
7. How Many More Times
8. High Waters
9. There Goes My Cool
10. Waves Deluxe Edition 7” single bonus tracks:
11. Supermodel Avalanches
12. Everything’s Fine
Back To The Water Below is now available to pre-order HERE. In addition to its digital release, physical formats include deluxe vinyl (packaged with a bonus 7” featuring two additional tracks) and two cassettes, all of which are available exclusively from Royal Blood’s official store. Amazon will stock an exclusive gold vinyl, while HMV (UK only) and select indie stores offer an exclusive clear vinyl. The range is completed by a CD and a regular black vinyl.
Featuring a newly-voiced circuit with more compression and versatility, these pedals are hand-crafted in Los Angeles for durability.
Messiah Guitars custom shop has launched a pair of new pedals: The Eddie Boostdrive Session Edition and Lil’ Ed Session Drive.
The two pedals are full-size and mini-sized versions of a newly-voiced circuit based on Messiah’s successful Eddie Boostdrive. The two new “Session” pedals feature more compression and versatility in the overall tone, and showcase Messiah’s ongoing collaboration with Nashville session guitarist Eddie Haddad.
The new Session Boostdrive schematic includes a fine-tuned EQ section (eliminating the need for the Tight switch on the earlier Boostdrive) and two independently operated circuits: a single-knob booster, and a dual-mode drive featuring a 3-band EQ. The booster consists of a single-stage MOSFET transistor providing boost ranging from -3dB to 28dB. At low settings, the boost adds sparkle to the tone, while a fully cranked setting will send your amp to a fuzzy territory. Thebooster engagement is indicated by a purple illuminated foot switch.
The overdrive contains a soft-clipped op-amp stage, inspired by a screamer-style circuit. The pedal includes a classic Silicon clipping mode (when activated, the pedal’s indicator light is blue)and an LED mode for a more open, amp-like break up (indicator light is red).
The active 3-band EQ is highly interactive and capable of emulating many popular drive sounds. Although both effects can be used separately, engaging them simultaneously produces juicy tones that will easily cut through the mix. Both new pedals accept a standard 9V pedal power supply with negative center pin.
“I love my original Boostdrive,” says Haddad, “but I wanted to explore the circuit and see if we could give it more focused features. This would make it more straightforward for guitarists who prefer simplicity in their drive pedals. The boost is super clean and loud in all the right ways…it can instantly sweeten up an amp and add more heft and sparkle to the drive section.”
Like their custom guitars and amplifiers, Messiah’s pedals are hand-crafted in Los Angeles for durability and guaranteed quality.
The Lil’ Ed Session Drive pedal includes:
- 5-knob controls, a 2-way mode side switch
- Durable, space-saving cast aluminum alloy 1590A enclosure with fun artwork
- True bypass foot switch
- Standard 9V/100mA pedal power input
The Eddie Session Edition pedal features:
- 6-knob controls, a 2-way mode switch; space-saving top-side jacks
- Durable, cast aluminum alloy 125B enclosure with fun artwork
- Easy to see, illuminated optical true bypass foot switches
- Standard 9V/100mA pedal power input
The Eddie Boostdrive Session Edition retails for $249.00, and the Lil’ Ed Session Drive for$179.
For more information, please visit messiahguitars.com.
Eddie BoostDrive and Lil' Ed pedal review with Eddie & Jax - YouTube
Enjoy the videos and music you love, upload original content, and share it all with friends, family, and the world on YouTube.Joe Glaser has been a pillar of Nashville's guitar community for decades. He's a man that dreams in mechanical terms often coming up ideas while deep in a REM cycle. Through his various companies he's designed, developed, and released a handful of "blue water" solutions to age-old instrument problems making the tolerable terrific. In this comprehensive visit to Glaser's home base, we get up close and personal with several of the products that enhance intonation and playability without disrupting the guitar's integrity.
In addition, Music City Bridge CEO Joshua Rawlings introduces us to a couple software ventures. Shop Flow helps increase productivity and efficiency for guitar builders and repair shops, while Gear Check aims to help guitarist's keep track of their collection and its history. Join John Bohlinger as he goes inside this inconspicuous six-string sanctuary.
With 700 watts of power, built-in overdrive, versatile EQ options, and multiple output choices, this bass head is designed to deliver unparalleled clarity and performance in a lightweight, rugged package.
PowerStage 700 Bass is compact and durable for easy transport yet powerful enough to fill any venue. This world-class bass head can also serve as the ideal clean power platform to amplify your preamp or modeler. Streamline your rig without compromising your sound and focus on what truly matters—your music.
Designed by Seymour Duncan’s legendary engineer Kevin Beller, a lifelong bass player, this 700-watt bass head delivers unparalleled clarity and performance in a lightweight, rugged package. Whether plugging in on stage or in the studio, PowerStage 700Bass provides tight low-end and rich harmonics, with a footswitchable built-in overdrive for an extra layer of sonic versatility.
A robust, bass-optimized EQ (treble, low mid, high mid, bass and presence) tailors your sound to any room. Need to switch between active and passive basses? You’re covered - PowerStage700 Bass includes a convenient -10db pad control. Multiple output options (¼”, Speakon, XLRDI, and headphone) work for any setup, whether powering cabinets, going direct to a PA, or recording straight into your audio interface.
- 700 Watts of Power at 4 ohms• Preamp voiced for a wide range of vintage & amp; modern bass sounds
- Built-in Overdrive that can go from a light vintage saturation to full-throttle bone-grinding distortion (with optional foot-switchable control)
- Effects loop allows for post-preamp processing and easy integration with modelers and preamp pedals
- 4 band EQ, Sweepable mid controls, and presence button offer dynamic tone shaping possibilities
- Aux input
- Super lightweight and durable chassis for easy transport with our optional gig bag or rack ears.
For more information, please visit seymourduncan.com.
Tone, Power, Portability: PowerStage 700 Bass | Seymour Duncan's New Bass Amp Head - YouTube
With separate Doom and Shimmer controls, low-pass and high-pass filter settings, and built-in Grit dynamic distortion, this pedal is a must-have for creating atmospheric sounds.
“Batverb was inspired by our Eurorack module, Desmodus Versio, but when we tried to bring thatexperience to guitar, we realized quickly that we would need to rethink the approach. The module andBatverb share zero code: the entire thing was redesigned from the ground up, with the dynamics and tonality of guitar at the forefront,” said Stephen McCaul, Chief Noisemaker at Noise Engineering.
Batverb was designed and built in sunny Southern California. It is currently available for preorder at $499 and will start shipping March 13, 2025.
Key Features
- Predelay/delay Time and Regen controls
- Separate Doom and Shimmer controls add in suboctaves and haunting overtones
- Low-pass and high-pass filter settings for the reverb tank allow you to add filtering and harmonics to reverb tails
- Built-in Grit dynamic distortion can apply to only the wet signal or the whole output
- Includes onboard dry/wet Blend control and input- and output-gain parameters
- Duck switch controls the reverb’s behavior using your playing to shape the output
- Three bypass modes allow control of tails when pedal is disengaged
- Create instant atmospheres with reverb-freezing Hold footswitch
- Route the expression input can to any parameter on the pedal
- Store and recall 16 presets in response to MIDI program-change messages
For more information, please visit noiseengineering.us.