Premier Guitar features affiliate links to help support our content. We may earn a commission on any affiliated purchases.

Port City Amps Releases the Anzu

Port City Amps Releases the Anzu

The Anzu is designed to serve as a clean, all-tube, hand-wired circuit that can bring new life to the drive pedals in your rig.


For years we have been asked to make a dual channel amp. After years of requests we are pleased to offer the Anzu. (The Anzu is a mythical animal that can breathe both water and fire.)

The two independent channels are essentially two separate amps in one. Many dual channel amps treat the clean channel as an afterthought. Ours lays the foundation. The clean channel is our Pearl circuit, the second channel is our take on a British style, heavily modded gain circuit.

The Port City Anzu features:

  • Two independent channels with interactive Treble, Middle, and Bass controls (footswitchable)
  • Bright Switch for High-end Frequency Tone Shaping on the Clean channel
  • TAD matched 6L6’s
  • JJ ECC83 x 3 – Preamp tubes
  • JJ ECC83 x 1 – Phase Inverter
  • 6112 x 1 - Effects Loop
  • GZ34 Rectifier
  • USA-made Hammond Transformers
  • Tube Buffered Effects Loop
  • External speaker jack
  • 50 Watts Output
  • 4 / 8 / 16 Ohm Impedance Switch
  • Weight: 39 lbs (50W) –
  • 20″W // 10.5″H // 8.25″D
MSRP : $2850

For more information, please visit portcityamps.com.​

Port City Amps - Anzu Amplifier

The typical controls on a compressor can be confusing and often misunderstood. At the heart of the MXR Studio Compressor is the ratio control, which offers up four levels of squish.

Compression might be the most misunderstood effect on your board—until now.

I was recently listening to three accomplished guitar players discuss the how, when, and where to use compressors in their guitar rigs. All three players had wildly different views on all aspects of compressordom, from where they should be used in a signal chain to whether they are even worth the hardware that holds them together.

Read MoreShow less

By refining an already amazing homage to low-wattage 1960s Fenders, Carr flirts with perfection—and adds a Hiwatt-flavored twist.

Killer low end for a low-wattage amp. Mid and presence controls extend range beyond Princeton or tweed tone templates. Hiwatt-styled voice expands vocabulary. Built like heirloom furniture.

Two-hundred-eighty-two bucks per watt.

$3,390

Carr Skylark Special
carramps.com

5
5
5
4.5

Steve Carr could probably build fantastic Fender amp clones while cooking up a crème brulee. But the beauty of Carr Amps is that they are never simply a copy of something else. Carr has a knack for taking Fender tone and circuit design elements—and, to a lesser extent, highlights from the Vox and Marshall playbook—and reimagining them as something new.

Read MoreShow less

The author dials in one of his 20-watt Sonzera amps, with an extension cabinet.

Photo courtesy of PRS

Knowing how guitar amplifiers were developed and have evolved is important to understanding why they sound the way they do when you’re plugged in.

Read MoreShow less

Tobias bass guitars, beloved by bass players for nearly half a century, are back with the all-new Tobias Original Collection.

Read MoreShow less