You can reduce your fears about shipping your instrument by taking the right steps to protect it in transit.
Even if you own only one instrument, if you’re an active guitar player, chances are good that sooner or later you’ll have to pack your guitar for shipment. Although it’s hard for some packers to realize, the dangers of shipping your guitar by UPS or FedEx are essentially the same as putting your guitar on an airline’s luggage conveyor belt when you fly.
Of course, thousands of guitars are safely shipped and flown in airline baggage holds every day with no protection besides a hardshell case. But a significant percentage are damaged, too, so the tips you’ll read here will improve your odds. And even when a guitar is in its case and the case is in a sturdy cardboard box, shipping a guitar is risky business. Is shipping a guitar or flying with it riskier than it used to be? You bet. Is there anything you can do to improve your guitar’s odds of survival that doesn’t cost a fortune? Absolutely.
Although caved-in guitar tops and splintered sides do occur sometimes when an acoustic guitar is shipped, the chances of that type of damage when the instrument is in a sturdy hardshell case, especially when the case is boxed, are actually quite slim. And by far, the most common shipping damage to guitars is shared equally by solidbody electrics, which probably tells you that I’m referring to the dreaded cracks that appear around the base of the headstock. This is so common that it’s sometimes called the “airline break.”
What confuses many people is that, despite the fact that their guitar arrived at its destination with a cracked neck, the shipping box shows no damage whatsoever. Along with the mystery of how the crack could have occurred is the added misery of realizing that filing a damage claim with the carrier is usually fruitless, because there’s no sign of mishandling. And repairing the cracks are only part of the pain, for even with the best possible repair yielding a good-as-new result, the guitar’s value has been diminished.
“No matter what the speed your guitar’s case is traveling, the best insurance you can give your instrument for safe arrival is to limit the distance its headstock can travel when the case comes to an abrupt halt.”
If you think of it as a whiplash injury, the cause of the cracks to your guitar’s headstock is easy to understand. Your guitar’s case, or the shipping box containing the case, was traveling at significant speed, but then its movement was stopped abruptly. Maybe it was dropped, or maybe it was on a conveyor system and a jam halted everything instantaneously. The damage occurred because the headstock had room to move within the case, and so it did—resulting in a crack where the headstock curves down at the nut. This is much the same injury as when your guitar is knocked off its stand and falls face-first on the floor. Even nice carpeting won’t save your guitar from headstock cracks for the same reason.
Especially when fitted with cast, enclosed tuners with metal buttons, a guitar’s headstock is a heavy object, and its momentum is simply more than a typical narrow mahogany guitar neck can withstand. A set of metal button Gotoh 510 tuners, for instance, weigh approximately half a pound. That’s about a third of the total weight of a typical mahogany neck on an acoustic flattop. And, of course, the cracks almost always appear around the nut, where the neck is narrowest and where there’s a significant angle. This can also happen when a guitar, in its hardshell case, is left standing vertically on end. If the case is knocked over and the guitar lands face-first, that short drop is sometimes enough to crack a headstock because the barrel of the neck has far less room to move within the case compared to the headstock.
I could natter on for pages about how the dramatic increase in shipping traffic in recent years has resulted in far larger, longer, and faster conveyance systems for both airlines and shipping companies. But no matter what the speed your guitar’s case is traveling, the best insurance you can give your instrument for safe arrival is to limit the distance its headstock can travel when the case comes to an abrupt halt. You can add stiff padding behind the headstock, which functions similar to the headrest in a car, and supplement that with additional padding over the face of the headstock that is slightly compressed when the case is closed. The objective is to make sure that all of your guitar stops moving at the same time when the case is dropped or tossed.
Loosening the string tension is also helpful, but there’s no need to make the strings totally slack. Just tune it down a couple of steps. Packing your guitar in its case in a shipping box doesn’t relieve you of the need to pack the headstock as outlined above, because the same whiplash dangers still apply.
Perhaps the greatest advantage to carefully packing your guitar before flying with it or shipping it is that you’ll sleep easier when it’s in transit.
The majestic Roland Space Echo is having a bit of a resurgence. Here’s a breakdown on what makes it tick, and whether or not it’s right for you.
In this article, we delve into one of the most cherished gadgets in my guitar collection, the Roland Space Echo RE-201. This iconic piece of equipment has been used by legendary musicians like Jonny Greenwood, Brian Setzer, and Wata from Boris, which only heightened my desire to own one. A few years ago, I was fortunate to acquire a vintage RE-201 in good condition and at a reasonable price.
Using the RE-201 today has its advantages and disadvantages, particularly due to its size, which is comparable to an amplifier head. When compared to modern equivalents like delay pedals or software plugins that closely emulate the original, the vintage RE-201 can seem inefficient. Here, I share my personal and subjective experience with it.
The RE-201 is a tape echo/delay effect that gained popularity in the 1970s and ’80s. Unlike the more complex analog BBD delays or digital delays, tape delays use magnetic tape to simultaneously record and play back sound via a magnetic tape head (similar to a guitar or bass pickup). Because the recording head and playback head are in different physical locations, there is a time gap during the recording and playback process, creating the “delay” effect. This concept was first discovered by Les Paul in the 1950s using two tape machines simultaneously.
However, this method has a drawback: The magnetic tape used as a storage medium has a limited lifespan. Over time, the quality of the tape degrades, especially with continuous use. This degradation is marked by muddy, wavy sounds and unavoidable noise. Yet, this is precisely where the magic of real tape echo lies! New tapes produce clearer, hi-fi sounds, while older tapes tend to produce wavy sounds known as “modulated delay.” Additionally, increasing the number of tape-head readers extends the gap time/delay time of the output, and activating multiple tape-head readers simultaneously creates unique echo/delay patterns.
“This degradation is marked by muddy, wavy sounds and unavoidable noise. Yet, this is precisely where the magic of real tape echo/delay lies!”
Just as how fuzz and distortion effects were discovered, the “imperfections” of tape also represent a historical fact about how the creative process in music follows an absurd, non-linear, and unique pattern. In everyday practical life, signal delay is something typically avoided; however, in a musical context, delay adds a deeper dimension. Today, it’s hard to imagine a pedalboard without a delay effect at the end of the chain.
This uniqueness inspired me to create Masjidil Echo, embracing the “imperfection” of a vintage tape echo/delay with magnetic tape that hasn’t been replaced for years. Many newer pedals, such as the Boss RE-20, Strymon El Capistan, and the Catalinbread Echorec and Belle Epoch, draw inspiration from vintage tape repeat machines. Each has its unique interpretation of emulating tape echo, all in a more compact and maintenance-free format. Real tape delay requires periodic maintenance and has mostly been discontinued since the mid 1980s, with Roland ceasing production of the Space Echo entirely in 1985.
However, in recent years, interest in real tape echo has surged, perhaps due to nostalgia for past technology. As a result, many vintage delay units have appeared on marketplaces at increasingly gargantuan prices! If you’re considering acquiring one, I recommend thinking it over carefully. Are you prepared for the maintenance? Will you use it for regular performances? Are you ready for the fact that magnetic tape will become increasingly difficult to find, potentially turning your machine into a mere display piece? I don’t mean to instill fear, but the real deal, in my opinion, still can’t be fully emulated into a more practical and future-proof digital format.
So, I’ll leave you with one final question for consideration: What if the genealogy of technology were reversed chronologically, with multihead/multitap delay discovered digitally in the 1950s, and in the 2000s, a technological disruption led to the invention of mechanical tape echo to replace digital technology? Which would you choose?
In collaboration with Cory Wong, the Wong Press is a 4-in-1 Press pedal features Cory’s personal specs: blue & white color combination, customized volume control curve, fine-tuned wah Q range, and a dual-color STATUS LED strip indicating current mode/pedal position simultaneously.
In collaboration with Cory Wong, this Wong Press is a 4-in-1 Press pedal features Cory’s personal specs: Iconic blue & white color combination, customized volume control curve, fine-tuned wah Q range, and a dual-color STATUS LED strip indicating current mode/pedal position simultaneously.
Renowned international funk guitar maestro and 63rd Grammy nominee Cory Wong is celebrated for his unique playing style and unmistakable crisp tone. Known for his expressive technique, he’s been acclaimed across the globe by all audiences for his unique blend of energy and soul. In 2022, Cory discovered the multi-functional Soul Press II pedal from Hotone and instantly fell in love. Since then, it has become his go-to pedal for live performances.Now, two years later, the Hotone team has meticulously crafted the Wong Press, a pedal tailored specifically for Cory Wong. Building on the multi-functional design philosophy of the Soul Press series, this new pedal includes Cory’s custom requests: a signature blue and white color scheme, a customized volume pedal curve, an adjustable wah Q value range, and travel lights that indicate both pedal position and working mode.
Cory’s near-perfect pursuit of tone and pedal feel presented a significant challenge for our development team. After countless adjustments to the Q value range, Hotone engineers achieved the precise WAH tone Cory desired while minimizing the risk of accidental Q value changes affecting the sound. Additionally, based on Cory’s feedback, the volume control was fine-tuned for a smoother, more musical transition, enhancing the overall feel of volume swells. The team also upgraded the iconic travel lights of the Soul Press II to dual-color travel lights—blue for Wah mode and green for Volume mode—making live performances more intuitive and visually striking.
Features
- True Bypass
- 4 in 1 functionality (volume, expression, wah, volume/wah)
- New dual-color STATUS LED strip indicating pedal mode and position in real time
- Cory’s custom volume curve and wah Q control
- Classic-voiced wah tone with flexible tonal range
- Active volume design for keeping lossless tone
- Separate tuner and expression outputs for more connection possibilities
- 9V DC or 9V battery power supply
Introducing the Hotone Wong Press - Cory Wong's signature Volume/Wah/Expression Pedal - YouTube
Check the product page at hotone.com
“The Player II Series represents our continued evolution in design and functionality,” said Justin Norvell, EVP of Product, FMIC. “We listened to the feedback from musicians around the world and incorporated their insights to refine and innovate our instruments. The re-introduction of rosewood fingerboards is a restoration of the ‘original Fender recipe’ and will no doubt be a fan favorite - but we didn’t want to stop there. We’ve also incorporated our rolled fingerboard edges for a broken-in feel, upgraded hardware, and have some new body options as well- which underscores our commitment to providing players and creators with the tools they need to express their unique sound and style. The Player II Series is not just an upgrade, it's a detailed re-imagining of our core silhouettes, highlighting our dedication to quality and the continuous refinement of our instruments.”
Additionally, Player II offers new options for chambered ash and chambered mahogany bodies for the Player II Stratocaster and Telecaster models, which will be available in October. Designed for musicians ready to elevate their craft, the Player II Series sets a new standard for quality and performance in the mid-price range.
Fender Player II Stratocaster HSS Electric Guitar - Coral Red
Player II Strat HSS RW, Coral RedFender Player II Jaguar Electric Guitar - Aquatone Blue
Player II Jaguar RF, Aquatone BlueThis reader solicited the help of his friend, luthier Dale Nielsen, to design the perfect guitar as a 40th-birthday gift to himself.
This is really about a guy in northern Minnesota named Dale Nielsen, who I met when I moved up there in 2008 and needed somebody to reglue the bridge on my beloved first guitar (a 1992 Charvel 625c, plywood special). Dale is a luthier in his spare time—a Fender certified, maker of jazz boxes.
Anyway, we became friends and I started working on him pretty early—my 40th birthday was approaching, and that meant it was time for us to start designing his first solidbody build. If you stopped on this page, it’s because the photo of the finished product caught your eye. Beautiful, right? The 2018 CCL Deco Custom: Never shall there be another.
Old National Glenwood guitars were my design inspiration, but I wanted a slim waist like a PRS and the like. We used a solid block of korina to start, routed like MacGyver to get the knobs and switches where I wanted them. Dale builds all his own lathes and machines (usually out of lumber, y’all), as the task requires. This beast took some creativity—it’s tight wiring under that custom-steel pickguard. Many were the preliminary sketches. Four coats of Pelham blue, 11 coats of nitro. Honduran mahogany neck, Madagascar ebony fretboard with Dale’s signature not-quite-Super-400 inlays. He designed the logo; I just said, “Make it art deco.”
We sourced all the bits and bobs from StewMac and Allparts and Reverb and the like, mostly to get that chrome look I so adore. Graph Tech Ratio tuners, Duesenberg Radiator trem (had to order that one from Germany), TonePros TP6R-C roller bridge. The pickups were a genius suggestion from the builder, Guitarfetish plug ’n’ play 1/8" solderless swappable, which means I have about 10 pickups in the case to choose from: rockabilly to metal. And both slots are tapped, with the tone knobs serving as single- to double-coil switches. I put the selector on the lower horn to accommodate my tendency to accidentally flip the thing on Les Pauls—definite lifesaver.
Reader and guitar enthusiast, Cody Lindsey.
Dale offered to chamber this monster, but I said what doesn’t kill you makes you stronger. It weighs in at 11 pounds, if it’s an ounce. We carved the neck to match a ’60s SG, so it’s like the mini bat you get at the ballpark on little kids’ day. Easy peasy. 1 11/16" nut, 25" scale, jumbo frets, just 2 1/8" at the 12th fret.
Delivery in its lovely, hygrometer-equipped Cedar Creek case actually happened a month or two shy of my 41st, but hey, you can’t rush these things. We ended up with a studio Swiss Army knife; it does a bit of everything and does it effortlessly. A looker, too. Dale didn’t spend his career doing this kind of thing—he was in IT or some such—and I imagine he’s winding this “hobby” of his down these days, enjoying retirement with a bottle of Killian’s and a lawn chair at Duluth Blues Fest. But this guitar will live on as a marker of his skill and otherworldly patience. It sits at the head of the class in my practice room, welcoming any visitors and bringing a smile to my face every day. And Dale, my friend, I’ll be 50 before you know it....
Cody requested that Dale design an art deco logo for the guitar’s headstock.