I was hired to lead the house band for a benefit to raise funds for veterans battling PTSD. Jared James Nichols, Kirk Fletcher, Dave Mustaine, and others joined the cause, and here’s how it went.
Often with multi-act shows, limited budget, space, and inputs on the mix necessitate that some acts share a house band. Because I’ve been slugging it out for 30-plus years in Nashville, I occasionally get hired to lead it. A few weeks ago, I was lucky enough to get the call to lead for “Rock to Remember,” a concert/live auction collab between Guitars for Vets (an organization that provides guitars to veterans struggling with PTSD) and Gibson Gives.
We had a killer lineup, including Jared James Nichols, Dave Mustaine of Megadeth, Kirk Fletcher, and Tonic frontman Emerson Hart. In addition to supporting those acts, I was asked to do one of my songs. There was only room for a three-piece band, and I needed a rhythm section who were intuitive enough to nail a pressure gig with limited or no rehearsal, diverse enough to cover pop, blues, rock, and metal, and could sing harmony. I called drummer Duran Crone and bassist Logan Hatcher, with whom I’ve played enough jam-type gigs that I knew they could hit the curve. As an added bonus, Hatcher served six years in the Marines, which might inspire some vets to see one of their own making it in the music industry.
It’s a bit unnerving playing with talented celebrity musicians you don’t know. But when you’re performing in front of a live audience, it's filmed for broadcast, and it's a no-rehearsal-plug-and-pray, that takes it up a notch. I wasn’t worried about Jared James Nichols and Kirk Fletcher. I knew they would both do something blues-based. Put four good to great players who haven’t played together onstage and tell them to play blues: it’s going to be interesting.
"The idea of trying to cover Marty Friedman’s solo on “Symphony of Destruction” in front of a very intimidating Dave Mustaine was terrifying. Although the internet is full of children who can nail that solo, I cannot."
Nichols walked into the crowded greenroom at the Gibson Garage with just his ’52 Les Paul. I introduced him to Crone and Hatcher, who hadn’t heard Nichols’ song yet. We walked to the only quiet place we could find—a large, tiled bathroom. Nichols played “Baby Can You Feel It”on his phone while I wrote a chart and the guys tried to discern their parts. Then we went onstage, Nichols told us about the form, and we ran it once during soundcheck. Nichols gave us a little more direction, then we went back about an hour later and nailed it live. Nichols is such a driving force that you really can’t get lost playing with him.
Kirk Fletcher was even easier. It was a hectic day, so the details are fuzzy, but I don’t think Fletcher made it to soundcheck. He just texted me saying something like, “Let’s do a blues shuffle in A.” Fletcher met Crone and Hatcher as we walked onstage to perform. Fletcher plugged in, turned up, counted it off, and played his ass off. It couldn’t have been less stressful nor more fun.
Tonic’s Emerson Hart was like dessert. He was playing “If You Could Only See” and “You Wanted More,” two songs I genuinely loved back when there was music on MTV. In gigs like this, I rarely learn a solo note for note. Not that I don’t want to, it’s just that I’m not a particularly good mimic. Even if I get the notes right, it usually feels stiff and inauthentic. I usually start where the recording started but let it go where it goes. Some artists don’t like that, some do. Hart seemed cool with my improv and the performance went well. He has an iconic voice that has grown richer with time. He played and sang great, was fun, funny, and all about helping the cause.
The idea of trying to cover Marty Friedman’s solo on “Symphony of Destruction” in front of a very intimidating Dave Mustaine was terrifying. Although the internet is full of children who can nail that solo, I cannot. Maybe if I dedicated the next 10,000 hours of my life to it, I could get close, but it would still be like bad karaoke. So, I was hugely relieved when Gibson’s brand president Cesar Gueikian volunteered to cover it. He only had a weekend to prep but covered it with ease. Thanks Cesar.
The best part of this gig is that it raised funds for veterans battling PTSD. Studies prove what guitarists already know: playing music is a powerful therapy tool.
Two of my beloved nephews, Joe and John Bohlinger, were teenagers when they joined the Marines and went from hunting and fishing in Wyoming and Montana to heavy combat in Afghanistan. They voluntarily put themselves through years of a truly hellish, life-changing war because they wanted to keep us safe. That kind of trauma leaves an indelible mark. I’m grateful to be part of an organization that does something to try and help them.
We’re giving away more gear! Enter Stompboxtober Day 24 for your chance to win today’s pedal from Maxon!
Maxon OD-9 Overdrive Pedal
The Maxon OD-9 Overdrive Effects Pedal may look like your old favorite but that's where the similarity ends. Improved circuitry with a new chip yields the ultra-smooth dynamic overdrive guitarists crave. Drive and Level controls tweak the intensity and volume while the Hi-Boost/Hi-Cut tone controls adjust brightness. Features true bypass switching, a die-cast zinc case, and 3-year warranty. From subtle cries to shattering screams, the Maxon OD-9 delivers a huge range of tones.
Features
Improved circuitry with a new chip yields ultra-smooth dynamic overdrive
Drive and Level controls tweak the intensity and volume
Hi Boost/Hi Cut tone controls adjust brightness
True bypass switching
Die-cast zinc case
AC/DC operation (order optional Maxon AC210N adapter)
Product Specs
Input: 1/4" mono jack
Output: 1/4" mono jack
Power: 9V DC, 6 mA, center pin minus (not included)
Dimensions: (WxDxH) 74 mm x 124 mm x 54 mm
Weight: 580g
Founding Grateful Dead bassist Phil Lesh has died at 84.
Official statement from Phil Lesh's Facebook page:
He was surrounded by his family and full of love. Phil brought immense joy to everyone around him and leaves behind a legacy of music and love. We request that you respect the Lesh family’s privacy at this time.
This is a developing story.
Vintage-style reverb, tremolo, and vibrato sounds abound in a 3-in-1 stomp that might be the only box you need.
Here’s part two of our look under the hood of the funky rhythm guitar master’s signature 6-string.
Hello and welcome back to Mod Garage. In this edition, we’re continuing our journey through the Fender Cory Wong Stratocaster wiring, bringing it all together.In the previous installment, the last feature on the funky 6-stringer’s signature axe that we discussed was the master volume pot and the corresponding treble-bleed circuit. Now, let’s continue with this guitar’s very special configuration of the tone pots.
Tone pot with Fender Greasebucket tone system:
This 250k tone pot is a standard CTS pot with a 90/10 audio taper found in all U.S.-built Fender guitars. The Cory Wong guitar uses the Fender Greasebucket system, which is added to the pot as a ready-to-solder PCB. The Greasebucket PCB is also available individually from Fender (part #7713546000), though you can use conventional electronic parts for this.
Fender introduced this feature in 2005 on some of the Highway One models and some assorted Custom Shop Strats. The Greasebucket name (which is a registered Fender trademark, by the way) is my favorite of Fender’s marketing names, but don’t let it fool you: Your tone will get cleaner with this modification, not greasy and dirty.
According to Fender, the Greasebucket tone circuit reduces high frequencies without adding bass as the tone knob is turned down. Don’t let that description confuse you. A standard Strat tone control does not add any bass frequencies! As you already know, with a passive system you can’t add anything that isn’t already there. You can reshape the tone by deemphasizing certain frequencies and making others more prominent. Removing highs makes lows more apparent and vice versa. In addition, the use of inductors (which is how a passive pickup behaves in a guitar circuit) and capacitors can create resonant peaks and valleys (band-passes and notches), further coloring the overall tone.
Cory Wong bringing the funk onstage.
This type of band-pass filter only allows certain frequencies to pass through, while others are blocked. The standard tone circuit in a Strat is called a variable low-pass filter (or a treble-cut filter), which only allows the low frequencies to pass through while the high frequencies get sent to ground via the tone cap.
The Greasebucket’s band-pass filter is a combination of a high-pass and a low-pass filter. This is supposed to cut high frequencies without “adding” bass, which has mostly to do with the resistor in series with the pot. That resistor means the control will never get to zero. You can get a similar effect by simply not turning the Strat’s standard tone control all the way down. (The additional cap on the wiper of the Greasebucket circuit complicates things a bit, though; together with the pickups it forms an RLC circuit, but I really don’t want to get into that here.)
The standard Fender Greasebucket tone system is used in the Cory Wong Strat, which includes a 0.1 μF cap and a 0.022 uF cap, along with a 4.7k-ohm resistor in series. These are the values used on the PCB, and without the PCB it looks like the illustration at the top of this column.
Push-push tone pot with preset overwriting function:
The lower tone pot assigned to the bridge pickup is a 250k audio push-push pot with a DPDT switch. The switch is used to engage a preset sound by overwriting the 5-way pickup-selector switch, no matter what switching position it is in. The preset functionality has a very long tradition in the house of Fender, dating back to the early ’50s, when Leo Fender designed a preset bass sound on position 3 (where the typical neck position is on a modern guitar) of the Broadcaster (and later the Telecaster) circuit. Wong loves the middle-and-neck-in-parallel pickup combination, so that’s the preset sound his push-push tone pot is wired for.
The neck pickup has a dedicated tone control while the middle pickup doesn’t, which is also another interesting feature. This means that when you hit the push-push switch, you will engage the neck and middle pickup together in parallel, no matter what you have dialed in on the 5-way switch. Hit the push-push switch again, and the 5-way switch is back to its normal functionality. Instead of a push-push pot, you can naturally use a push-pull pot or a DPDT toggle switch in combination with a normal 250k audio pot.
Here we go for the wiring. For a much clearer visualization, I used the international symbol for ground wherever possible instead of drawing another black wire, because we already have a ton of crossing wires in this drawing. I also simplified the treble-bleed circuit to keep things clearer; you’ll find the architecture of it with the correct values in the previous column.
Cory Wong Strat wiring
Courtesy of singlecoil.com
Wow, this really is a personalized signature guitar down to the bone, and Wong used his opportunity to create a unique instrument. Often, signature instruments deliver custom colors or very small aesthetic or functional details, so the Cory Wong Stratocaster really stands out.
That’s it! In our next column, we will continue our Stratocaster journey in the 70th year of this guitar by having a look at the famous Rory Gallagher Stratocaster, so stay tuned!
Until then ... keep on modding!