![Rig Rundown: Alter Bridge [2023]](https://www.premierguitar.com/media-library/image.jpg?id=45529166&width=1200&height=800&quality=85&coordinates=106%2C0%2C94%2C0)
Name: John Haigis
Hometown: Tolland, Connecticut
Guitar: Beheaded Deacon
A collaboration at my friend’s well-equipped workshop was nixed immediately, mainly due to my health, but also because his free time became limited, since his schedule was occupied with his full-time job and his project of building a house. As a result, the teamwork/consulting was going to have to take place via email.
My friend started me off with a very nice neck-blank sandwich of walnut and maple (from a tree that fell across one of our mountain-bike trails—bonus!) and a severely warped neck that was the donor for the fretboard and truss rod.
Ready for some headless hammer-ons.
I planned to copy a Traveler Ultra-Light Edge, which has an ingeniously designed tuning configuration and two-layer plywood body. But, by the time I finished carving the neck, I had decided that I would not be happy with a guitar body as small as the Traveler. I needed something more shapely and comfortable. The Ovation Breadwinner/Deacon shape won over a Klein Headless or Abasi Larada, both close runners-up.
The body took much longer to make than I anticipated. The in-body tuner arrangement is ideal for CNC fabrication, but it required a lot of planning and skill to make by hand. The body consists of two ¾″-thick pieces of plywood, so it was very convenient to chamber the insides before gluing them together. I mixed my own wipe-on polyurethane and added artist oil paint for a translucent tint. The finish was delayed by a month of frustration with inferior solvents due to new state VOC (Volatile Organic Compound) laws. My health limits my driving to only a few miles at a time, so I had to wait a couple of weeks until an anonymous helper could do a “moonshiner run” to a neighboring state for the good stuff (cue “Red Barchetta,” or more like “Blue Honda Fit!”).
“The body is lightweight, resonant, well-balanced, and very comfortable in both casual and classical playing positions.”
The circuit consists of a volume pot with a treble-bleed filter and a flush-mounted toggle switch for selecting single-, series-, or parallel-coils. The bare aluminum pieces (string-anchor headpiece, humbucker surround, string-roller mounts, and engine-turned neck plate and cavity covers) were made by hand using aluminum scraps. The volume knob is aluminum and zebra wood.
I am very happy with the result. The body is lightweight, resonant, well-balanced, and very comfortable in both casual and classical playing positions. It sounds great, and I love the translucent red color that accentuates the plywood contours. Although I didn’t get to make sawdust with my friend, he gave me plenty of advice during the process, and the neck is made from materials that he contributed, so I consider that a success.
Submit your guitar story at premierguitar.com/reader-guitar-of-the-month
If your story is chosen, you'll also receive a $100 virtual gift card from Allparts, the industry’s leading supplier of guitar and bass parts! All entrants will receive a 20-percent-off coupon to allparts.com.
Please note that the coupon cannot be combined with other promotions.
Enter here and find out more about the prize below!
Emily Wolfe Signature Sheraton Stealth GiveawayEpiphone Emily Wolfe "White Wolfe" Sheraton Semi-Hollow Electric Guitar - Aged Bone White
The Epiphone Emily Wolfe “White Wolfe” Sheraton is based on the triple-threat rock & roll singer, songwriter, and guitarist’s popular Sheraton Stealth. Once again, Emily has lent her creativity to develop her new artist model. The Emily Wolfe “White Wolfe” Sheraton is equipped with an Indian laurel fretboard with 22 medium jumbo frets and mother of pearl block inlays with abalone lightning bolts. The headstock has a mother of pearl tree of life inlay on the front, Emily’s Wolfe logo and a white gloss Emily Wolfe signature on the rear, and is outfitted with Grover® Rotomatic® tuning machines and a Graph Tech® nut. An Epiphone LockTone™ Tune-O-Matic™ bridge and Stop Bar tailpiece hold down the other end of the strings and contribute to the impressive sustain of the instrument. The electronics include full-sized Epiphone Alnico Classic PRO™ humbucker™ pickups paired with CTS® potentiometers for smooth control over individual pickup volume and overall tone. It’s finished in Aged Bone White paired with lightly aged gold hardware. An EpiLite™ case is included.