Premier Guitar features affiliate links to help support our content. We may earn a commission on any affiliated purchases.
Gallery: Experience PRS Performances
Photos from performances by Dweezil Zappa, David Grissom, Buddy Guy, Carlos Santana, Electric Mary, Bugs Henderson, Johnny Hiland, Howard Leese, Jim McCarty and more.
Some pieces of gear become legendary because everyone used them. Others become legendary because one person used them, relentlessly, until the sound became inseparable from the player. The original MXR Flanger/Doubler—the M-126 rack unit, a fixture of studios and touring rigs throughout the ’70s and ’80s—belongs mostly to the second category. Yes, it swept through countless studio sessions in its heyday, doing the jet-engine swoosh work flangers are built for.
Adding to the company’s broad range of guitar accessories, D’Addario has introduced a pair of new capo models: the new Artist+ Carbon Capo, featuring the company’s first-ever carbon fiber design, and an updated black Artist Capo.
Both capos feature D’Addario’s patented FlexFit Technology, which automatically adapts to different fretboard radii and string gauges, distributing pressure evenly across every string and fret. The net result? Improved tuning stability.
Together, the two capos are designed to give guitar players more control and fast, one-handed operation. Both capos feature an adjustable spring tension micrometer, which allows players to achieve the exact pressure they need for clean, buzz-free fretting without pulling the strings out of tune. And both capos include a built-in pick holder that keeps a spare pick conveniently within reach.
Assembled in the USA, the new Artist+ Carbon Capo pairs these features with ultra-lightweight carbon fiber construction, delivering pro-grade strength without adding unnecessary weight and bulk to the neck of the guitar. The updated Artist Capo brings the same FlexFit performance to its original design, so players have two distinct options built around the same proprietary tech.
Key features include:
Adjustable Spring Tension Micrometer: Allows players to achieve the ideal, specific pressure they need for clean fretting and better tuning stability.
Patented FlexFit Technology: Automatically adapts to fretboard radii and string gauges, distributing even pressure across every string.
One-Handed Operation: Makes capo placement and position changes fast and easy.
Built-In Pick Holder: Keeps a spare pick conveniently within reach.
Ultra-Lightweight Carbon Fiber Construction (Artist+): Combines durability with minimal weight.
USA Assembly (Artist+): Assembled in the U.S. for long-lasting quality.
D’Addario’s Artist+ Carbon Capo is available at a street price of $29.99. The updated Artist Capo carries a street price of $25.99. For more information visit Daddario.com.
D'Addario
Artist+ Carbon Capo
Adding to the company’s broad range of guitar accessories, D’Addario has introduced a pair of new capo models: the new Artist+ Carbon Capo, featuring the company’s first-ever carbon fiber design, and an updated black Artist Capo.
PG’s Chris Kies caught up with Chelsea Wolfe and her longtime collaborator Ben Chisholm at Marathon Music Works in Nashville, where they were playing in support of Wolfe’s new record, The Dark. Have a look at some quick highlights below, and tune into the new Rig Rundown for all the details.
Wolfe was given this Gretsch Broadkaster years back and keeps coming back to it—she’s drifted further into hollowbodies over time, which she says is a shame given how much she likes her solidbodies. She likes the resonant feedback and the low end, and feels a bigger guitar suits her frame. Managing that feedback is a nightly adjustment depending on the room.
Cold Comfort
The ES-335 has long been seen as Wolfe’s signature electric, and it’s still on the road, though at the moment it comes out for one song—“Cold.” She figures every tour ends up with one guitar you play the most, and this time it isn’t this one.
Dolly’s Pickguard
Her Taylor 416ce sports a custom pickguard inspired by a photo of Dolly Parton with a similar one. Taylor gave her this one and sent it to a maker in Nashville to have the pickguard made. People point out she rarely uses a pick on the acoustic. She thinks it looks beautiful anyway.
Grayscale
Wolfe’s amp is a Fender Bassbreaker combo, which she believes is discontinued. She likes how it takes pedals, and she likes the look: slightly vintage but in grayscale rather than the usual tan. She has the head and cab as well, but it’s the combo on this tour.
Chelsea Wolfe’s Pedalboard
The top row of Chelsea’s board stays on all night: a JHS NOTAKLÖN for general gain, an EarthQuaker ZEQD-Pre she landed on after a long search for the right preamp, a UAFX 1176 compressor, and an EQD Dispatch Master. The heavier end runs a JHS Hard Drive for most of the newer material, an EQD Acapulco Gold that’s been on her board since the Hiss Spun era, and a Death by Audio Apocalypse. A Korg tuner and a Dunlop volume pedal round it out.
Her Happy Place
The left half of the floor is all vocals. Wolfe’s father gave her pedals as a kid and she ran her voice through them with an adapter she rigged for the mic cable, which is where all this started. A Radial Voco-Loco gets the mic into the chain, feeding a DigiTech DigiDelay and a Boss RV-6 she calls her ride or dies, an EQD Afterneath, a JHS Octave Reverb, and a Boss RC-20XL. Not seen here: the Third Man Troika, a Jack White and JHS design built for singers—the one piece of gear she admits to impulse-buying.
Florida Man Special
Chisholm found this Peavey T-40 on Reverb, sold by Drew Storcks of Shy, Low, already fitted with an Electrical Guitar Company aluminum neck by someone he’s never identified. He’d wanted a T-40 since seeing one at a session with the Armed, and wanted an aluminum neck for the sustain. It’s brighter and meaner than anything else he’s played, enough that he had to calm down his existing tones to accommodate it.
The B Team
The Nash bass was his main for years and he used it a lot on the new album, before the Peavey turned up. It’s the backup now, and picking it up after the T-40 is a shock—mostly because of how light it is.
Quad Squad
Chisholm abandoned a full pedalboard mid-rehearsal once a Neural DSP Quad Cortex arrived. It’s running Ampeg models, fuzz, overdrive, compression, and chorus, plus the modulated-delay patch behind the whale noises he makes between songs. A clean channel runs parallel at 50 percent, so the low end survives the worst of the fuzz. A Dunlop Volume (X) 8, Korg tuner, and Walrus Audio supply round things out.
Two Fifteens
A Quilter Bass Block 802 powers the rig, with its EQ bypassed entirely — he’s using the effects return and letting the Quad Cortex do the amp work. The cab is a Tyrant 2x15 he got from Sean at Tyrant years ago, after deciding an 8x10 wasn’t delivering the sub frequencies he wanted.
Elan Audio Lab has released the SoundBakery, a passive analog reactive attenuator, load box, and DI designed to let players run tube amps at high output while controlling speaker volume. Handmade in the USA, SoundBakery builds on the design legacy of MetalHead Electronics.
SoundBakery uses a reactive load designed to mimic a speaker cabinet’s changing impedance. Its attenuation knob adjusts speaker output from approximately 25 percent of full level down to silence. A dedicated Attenuator Bypass switch connects the amplifier directly to the speaker cabinet for full, unattenuated output. The balanced XLR and 1/4-inch line outputs remain connected even in bypass mode.
With the reactive load engaged, SoundBakery operates without a speaker cabinet for silent recording, direct-to-PA use, and in-ear monitoring. The line outputs can also feed another amplifier. They carry the amp’s signal without cabinet simulation or EQ, allowing players to add impulse responses or cabinet simulation in their recording software. One level control adjusts both line outputs.
SoundBakery requires no batteries or power supply.
Features:
Reactive load for tube amplifiers up to 100 watts
Three dedicated 4-, 8-, and 16-ohm amplifier inputs
Speaker attenuation knob
Dedicated Attenuator Bypass switch
One 1/4-inch speaker output
Balanced XLR and unbalanced 1/4-inch line outputs
Shared line-out level control
Silent load-box operation
Aluminum chassis, approximately 4 lb.
Dimensions: 5.9 x 7.9 x 2.75 inches (150 x 200 x 70 mm)
SoundBakery is available directly from Elan Audio Lab for $479. For more information, visit elanaudiolab.com.
Elan Audio Lab
SoundBakery
Elan Audio Lab has released the SoundBakery, a passive analog reactive attenuator, load box and DI designed to let players run tube amps at high output while controlling speaker volume. Handmade in the USA, SoundBakery builds on the design legacy of MetalHead Electronics.
Boss has introduced the Katana-25, the latest addition to the company’s popular amplifier lineup for guitar and bass. Offering the Katana sound in a compact 25-watt amp for home playing, Katana-25 is designed for new and returning guitarists. It offers six unique amp characters and over 60 onboard Boss effects provide studio-grade sounds, while onboard Bluetooth and the companion Boss Tone Studio app enhance daily sessions with support for song streaming, effects editing, playing with YouTube videos, and downloading new sounds on Boss Tone Exchange.
