NAMM '12 - Tech 21 Boost Overdrive, Boost Distortion, Boost Fuzz, Bass Boost Fuzz Demos
PG's Rebecca Dirks is On Location in Anaheim, CA, for the 2012 NAMM Show where she visits the Tech 21 booth. In this segment, we get to see and hear demos of their new line of Boost Series stompboxes, incluind the Boost Overdrive, Boost Distortion, Boost Fuzz, Bass Boost Fuzz, and the VT Bass 1000 amplifier.
PG's Rebecca Dirks is On Location in Anaheim, CA, for the 2012 NAMM Show
where she visits the Tech 21 booth. In this segment, we get to see and
hear demos of their new line of Boost Series stompboxes, incluind the
Boost Overdrive, Boost Distortion, Boost Fuzz, Bass Boost Fuzz, and the
VT Bass 1000 amplifier.
Hereās how 21 killer players from the past year of Rig Rundownsāincluding Justin Chancellor, Zakk Wylde, MonoNeon, Carmen Vandenberg, Sturgill Simpson, Jason Isbell, and Grace Bowersāuse stomps to take their sounds outside the box.
TOOL'S JUSTIN CHANCELLOR
Justin Chancellorās Pedalboard
If you ever catch yourself playing air guitar to Tool, youāre probably mimicking Justin Chancellorās parts. āSchism,ā āThe Pot,ā āForty Six & 2,ā āH.,ā āFear Inoculum,ā āDescending,ā āThe Grudge,ā and plenty of others feature his buoyant bass riffs.
What stomps does he run his Wal, StingRay, and Fender basses through? Glad you asked. His setup is either a bass playerās dream or nightmare, but for someone as adventurous as Chancellor, this is where the party starts.
Youāll notice many of his pedals are available at your favorite guitar store, including six Boss boxes, an Ernie Ball Volume Pedal, and MXR Micro Amp. Crucial foot-operated pedals are in blue: the Dunlop JCT95 Justin Chancellor Cry Baby Wah with a Tone Bender-style fuzz circuit (far left) and DigiTech Bass Whammy (middle). He really likes using the Tech 21 SansAmp GT2 for distortion and feedback when the Whammy is engaged or heās playing up the neck. Covering delays are three pedalsāhe has the pink Providence DLY-4 Chrono Delay programmed to match drummer Danny Careyās BPMs in āPneuma,ā which slightly increase during the song from 113 ms to 115 ms. The Boss DD-3s are set for different speeds with the one labeled āFasterā handling āThe Grudgeā and the other one doing more steady repeats. Thereās a pair of vintage Guyatone pedalsāthe Guyatone VT-X Vintage Tremolo Pedal (Flip Series) and Guyatone BR2 Bottom Wah Rocker (a gift from guitarist Adam Jones). The Gamechanger Audio Plus pedal is used to freeze moments and allow Justin to grab onto feedback or play over something. The Boss GEB-7 Bass Equalizer and Pro Co Turbo RAT help reinforce his resounding, beefy backbone of bass tone, while the MXR Micro Amp helps goose his grimy rumbles. The Boss LS-2 Line Selector is a one-kick escape hatch out of the complicated signal chain for parts of āSchism.ā The Wal and Music Man stay in check with the TU-3S tuner, a pair of Voodoo Lab Pedal Power 2 Pluses help bring things to life, and everything is wired up with EBS patch cables.
STURGILL SIMPSON AND LAUR JOAMETS
Sturgill Simpsonās Pedalboard
Alt-country veteran Sturgill Simpson packed light for his latest run. His board bears just a Peterson Stomp Classic tuner running into a Fulltone True-Path ABY-ST, which splits his signal to his two Magnatone Panoramic Stereo amps. āI wouldnāt use a tuner if I didnāt have to,ā he chuckles. The LILY P4D beside the splitter lets him control his mic signal to cut interference from onstage noise.
Laur Joametsā Pedalboard
For his main board, Laur Joamets packs a little heavier than his boss. The platform, made by West Coast Pedal Board, carries a Peterson StroboStomp, Greer Amps Arbuckle Trem, sRossFX fuzz/overdrive, MXR Booster, T-Rex Replica, sRossFX germanium octave pedal, TC Electronic Viscous Vibe, Dunlop EP103 Echoplex, and Source Audio True Spring Reverb. An MXR Tap lets him tap in delay tempos. He has a second pedalboard, as well, for his Stage One steel guitar. It goes into a Peterson StroboStomp HD, then on to a Greer Black Tiger and Goodrich Sound Company volume pedal, before hitting his Magnatone Varsity Reverb and a custom-built Fender brown-panel Deluxe clone he calls āthe Charmer.ā
PANTERAāS ZAKK WYLDE AND REX BROWN
Zakk Wyldeās Pedalboard
When Panteraās bassist Rex Brown and singer Phil Anselmo decided to fire the band up again, the choice of fellow road dog Zakk Wylde on guitar seemed perfect. Hereās what Wylde had on the floor and in the racks for the bandās February date at Nashvilleās Bridgestone Arena.
His signature arsenal of effects seen here includes a MXR Wylde Audio Overdrive, MXR Wylde Audio Phase, Wylde Audio Cry Baby wah, and a Dunlop ZW357 Zakk Wylde Signature Rotovibe. The lone box that isnāt branded Wylde is a standard fare MXR Carbon Copy. Offstage, his rack is home to a MXR Smart Gate and MXR Wylde Audio Chorus thatās always on. Both are powered by a Voodoo Lab Pedal Power 3 Plus. Another drawer holds a Radial BigShot I/O True-bypass Instrument Selector, Lehle Little Dual II Amp Switcher, and a Radial BigShot EFX Effects Loop Switcher.
Rex Brownās Pedalboard
This tour was the first time Rex Brown used a switching system. His stage board sported a Dunlop JCT95 Justin Chancellor Cry Baby Wah, a 2000s Morley Pro Series II Bass Wah, Origin Effects DCX Bass Tone Shaper & Drive, a MXR M287 Sub Octave Bass Fuzz, and a Peterson StroboStomp HD. The brain of everything in the rack and onstage is the RJM Mastermind GT. And to help āmove mountains,ā Rex has a Moog Taurus III.
MSSVāS MIKE BAGGETTA AND MIKE WATT
Mike Baggettaās Pedalboard
Mike Baggetta has some core pedals in MSSV, his indie supergroup with legendary bassist Mike Watt and drummer Stephen Hodges. His arsenal includes a Creepy Fingers Hold Tight fuzz, an Electro-Harmonix Ring Thing, a Wilson Effects Freaker Wah V2, an EHX Deluxe Memory Man, and a Red Panda Tensor. The signal flows from his Benson amp into the Tensor, which he uses for glitch sounds, harmonizing, and overdub mode, among other feats. His Memory Man adds spaceāthe final frontier.
Mike Wattās Pedalboard
Mike Watt puts his signature Reverend Wattplower bass into a Broughton Audio high-pass filter, an EarthQuaker Devices The Warden optical compressor, and a Sushi Box Effects Finally tube DI that functions as a preamp. Thereās also a TC Electronic PolyTune.
MONONEON
MonoNeonās Pedalboard
The Memphis-born avant-funk bassist keeps it simple on the road with a signature 5-string, a tried-and-true Ampeg stack, and just four stomps. Almost all of his stomps have been zhuzhed up in his eye-popping palette. Heād used a pitch shifting DigiTech Whammy for a while, but after working with Paisley Park royalty, the pedal became a bigger part of his playing. āWhen I started playing with Prince, he put the Whammy on my pedalboard,ā Thomas explains. āAfter he passed, I realized how special that moment was.ā MonoNeon also uses a Fairfield Circuitry Randyās Revenge, a Fart Pedal (in case the Fairfield ring mod isnāt weird enough, we guess), and a JAM Pedals Red Muck covers fuzz and dirt needs. A CIOKS SOL powers the whole affair.
GRACE BOWERS
Grace Bowersā Pedalboard
Grace Bowers is one of the freshest new guitar stars to emerge in the past year. She has the essential fixinās for her classic rock tones: a Dunlop Crybaby Wah, Grindstone Audio Solutions Night Shade Drive, EarthQuaker Devices Tone Job, MXR Phase 90, MXR Phase 95, and Boss DD-2. Bowers powers them with a Voodoo Labs Pedal Power ISO-5.
GREEN DAYāS JASON WHITE
Photo by Raph Pour-Hashemi
Jason Whiteās Pedalboard
Long-time touring member Jason Whiteās stable is dominated by his Gibson Les Pauls and ES-335s. A Shure wireless system sends his signal to a rack set-up with an ISP noise gate, just in case Whiteās P-90s are picking up a lot of noise. From there, it hits a Dunlop Cry Baby and DVP1XL, then a MIDI-controllable RJM Effect Gizmo, which handles Whiteās effects: an MXR Reverb and Poly Blue Octave, Strymon TimeLine and Mobius, API Select TranZformer GTR, and a Custom Audio Electronics 3+SE Guitar Preamp, which gets engaged for clean tones and small combo sounds. A Lehle Dual SGoS Switcher and Fishman Aura DI Preamp handle changes with the piezo-equipped guitars. A Strymon Zuma provides the juice.
BONES UKāS CARMEN VANDENBERG
Carmen Vandenbergās Pedalboard
Carmen Vandenberg covers a lot of ground with her Bones UK guitar sounds, and sheās got a carefully curated collection of stomps to span the territory. Her guitar first hits an Ernie Ball Cry Baby before running through the rest of the pedals: a Boss TU-3, Fulltone OCD, Supro Drive, Pigtronix Octava, EHX Micro POG, Supro Chorus, Blackstar Dept. 10 Boost, EarthQuaker Devices Dispatch Master, MXR Carbon Copy Deluxe, Catalinbread Belle Epoch, and Boss NS-2. A Live Wire Solutions ABY manages the signals on their way to her signature Blackstar CV30s.
BLACK PUMASā ADRIAN QUESADA, BRENDAN BOND, AND ERIC BURTON
Adrian Quesadaās Pedalboards
Adrian Quesada loves tremolo and reverb, and uses a Strymon Flint for both. His other main stomp is the Electro-Harmonix Holy Grail that provides a healthy dose of spring reverb. Also along for the tour: a Line 6 Echo Park, a Catalinbread Echorec, a Boss GE-7 Equalizer, a Catalinbread Belle Epoch, and an EarthQuaker Devices. The Fulltone Clyde Wah Deluxe has stepped in for a different filter sweeper. Thereās also a JAM Pedals Ripple two-stage phaser, and a TC Electronic PolyTune2 Noir keeps his guitars in check. Thatās all on board one.
His second board includes a JHS 3 Series Delay, a JHS Crayon, and an Electro-Harmonix Nano POG. Utility boxes on hereāStrymon Ojai, JHS Mini A/B, and TC Electronic PolyTuneāhandle switching, tuning, and power.Brendan Bondās Pedalboard
Three pedals get the job done for Mr. Bond: an Acme Audio Motown D.I. WB-3 passive D.I., a JHS Colour Box, and a Boss TU-3 Chromatic Tuner.
Eric Burtonās Pedalboard
Frontman and guitarist Eric Burton is the bandās lone wireless member. To accommodate his onstage prowling, tech Bryan Wilkinson uses a Radial JDI passive direct box that takes in the XLR from the audio subsnake wireless rackmount and routes it into the first pedal: a Boss TU-3 Chromatic Tuner. From there, Burton only has a couple pedalsāa DigiTech Mosaic to mimic a 12-string for āOCT 33ā and a JHS Colour Box for any required heat. A Strymon Ojai turns everything on.
JASON ISBELL AND SADLER VADEN
Jason Isbellās Pedalboards
Jason Isbell could open a huge gear shop just by clearing off his boards and racks. First off, he has a complex wet/dry/wet setup that is parsed out via a RJM Mastermind, with two Magnatone Twilight Stereo combos carrying the all-wet effects. Thereās also a Radial JX44v2, which serves as the core signal manager. Above it, on the rack, is an Echo Fix Chorus Echo EF-X3R. Moving up the rack, one drawer includes an Ibanez DML10 Modulation Delay II, EarthQuaker Devices Tentacle, and a trio of stereo-field-only effects: a Boss MD-500, Strymon Volante, and Hologram Electronics Microcosm. Another level up, youāll find a Chase Bliss Preamp Mk II, Chase Bliss Tonal Recall Delay, Chase Bliss Dark World Reverb, Chase Bliss Condor EQ/Filter, Chase Bliss Gravitas Tremolo, Chase Bliss CXM-1978 Reverb (stereo-field only), Keeley 30ms Automatic Double Tracker, gold Klon Centaur, Analog Man Sun Lion Fuzz/Treble Booster, Analog Man King of Tone with 4-jack mod, Keeley 4-knob CompROSSor, Pete Cornish OC-1 Optical Compressor, EHX Micro POG, Analog Man ARDX20 Delay, and a trio of Fishman Aura Spectrum DIs.
Sadler Vadenās Pedalboard
Isbellās 6-string sparring partner Sadler Vadenās pedalboard chain starts with a Dunlop Clyde McCoy Wah, then a Lehle volume pedal, which feeds the Gig Rig. He uses a Line 6 M5 with a Dunlop expression pedal for a lot of modulation effects. Other pedals include a Crowther Prunes & Custard, Nordvang No.1, an Analog Man Dual Analog Delay, Comp, and King of Tone, a Strymon BlueSky, and a Greer Lightspeed. Every effect is isolated into the Gig Rig. The board has four outputs, two for each side of his 3rd Power British Dream, one for a Marshall plexi, and one that goes to an aux line and splits to a Vox Pacemaker. The auxiliary line is as a backup in case Sadlerās amps go down. It consists of a Strymon Iridium into a Seymour Duncan Power Stage that goes to FOH. And finally, his acoustic pedalboard sports a Shure wireless running into an ART Tube MP/C preamp into a L.R. Baggs Venue DI, with a Radial Engineering Bigshot selector.
MICHAEL LEMMO
Michael Lemmoās Pedalboard
Rising star player Michael Lemmo relies on his stomps for tone sculpting, but he doesnāt need much to get the job done. His signal hits a Korg tuner, followed by an Xotic EP Booster, Bearfoot FX Honey Bee OD, Red Panda Context, Boss DD-7, and TC Electronic Ditto. Theyāre all juiced by a Truetone 1 Spot Pro CS7.
HELMETāS PAGE HAMILTON
Page Hamiltonās Pedalboard
Page Hamilton used to travel with a full Bradshaw rig with rack gear, but heās reduced things to a pair of Eventide H9 units and a handful of Boss boxesāa PS-5 Super Shifter, a MT-2W Metal Zone Waza Craft, a TS-2 Turbo Distortion, a NS-2 Noise Suppressor, and a FB-2 Feedbacker/Booster. A couple of Peterson Stomp Classic tuners keep his ESP Horizons ready, and a Boss ES-5 Effects Switching System organizes all his sounds and settings.
BARONESSā JOHN BAIZLEY, GINA GLEASON, AND NICK JOST
John Baizleyās Pedalboard
The Baroness frontmanās board is packed with staged dirt boxes and tasteful mod stomps, all held in check with a GigRig G2, Peterson StroboStomp, and Ernie Ball Volume Pedal. The crown drive jewels are a heavily modded EHX Big Muff and Crowther Double Hot Cake, but a Beetronics FX Overhive and Pro Co RAT add sizzle, too. A Boss DD-3, DM-2W, and TR-2, EarthQuaker Devices Dispatch Master and Tentacle, MXR Phase 90 and Dyna Comp, and EHX Deluxe Memory Man handle the rest, while a DigiTech Whammy lurks for its moment to blast off.
Gina Gleasonās Pedalboard
Gleasonās favorite drive these days is the EQD Zoar. Piling on top of that are a MXR Super Badass Distortion, MXR Timmy, modded EHX Big Muff, and a touchy Philly Fuzz Infidel prototype; an Xotic SP Compressor and UAFX 1176 Studio Compressor tighten things up when needed. Three time machinesāthe Strymon TimeLine, EQD Space Spiral, and Boss DD-3āhandle delay, and a Walrus Slo dishes out reverb. The MXR EVH Phase 90 adds some color along with another DigiTech Whammy. The Ernie Ball Volume Pedal, Peterson StroboStomp, and GigRig G2 finish the line-up.
Nick Jostās Pedalboard
The bassistās board is powered by an MXR Iso-Brick, with an Ernie Ball Volume Pedal and Boss TU-3 pulling utility duties before an Xotic Bass BB Preamp, Boss ODB-3, DOD FX69B Grunge, MXR Stereo Chorus, and Tech 21 SansAmp Bass Driver DI.
WOLFMOTHERāS ANDREW STOCKDALE
Andrew Stockdaleās Pedalboard
When we walked into Nashvilleās Eastside Bowl for this Rig Rundown with Wolfmotherās alpha canine, Andrew Stockdale, it sounded like he was playing his SG through a Marshall stack at head-ripping volume. Nope! Stockdale was blasting skulls apart with a Line 6 HX Stomp doing the heavy tonal lifting. The rest of his boardās layout is a Snark floor tuner, an EHX Micro Synth (a Wolfmother staple), an Xotic AC Booster, an EHX Micro POG, a Dunlop Cry Baby 535Q Multi-Wah, a Boss TR-2 tremolo, a CIOKS DC5 power supply, and Shure GLXDC+ wireless.
FEARLESS FLYERS' CORY WONG AND MARK LETTIERI
Cory Wongās Pedalboard
Through a Shure GLXD16 wireless system, Cory Wong flows his guitar into his Neural DSP Quad Cortex, which runs a beta version of his Archetype: Cory Wong plugin, based off of a melding of a Dumble and a Fender Twin. The signal hits an onboard envelope filter and rarely used pitch shifter, then exits out the effects loop into a Wampler Cory Wong Compressor, Jackson Audio The Optimist, and a Hotone Wong Press. The signal goes back into the Quad Cortex, where thereās a preset phaser, stereo tape delay, and modulated reverb, plus a freeze effect. Two XLR outs run to front of house, while two run to Wongās Mission Engineering Gemini 2 stereo cabinet.
Mark Lettieriās Pedalboard
Mark Lettieriās signal first hits a Keeley Monterey Custom Shop Edition, followed by an MXR Deep Phase, J. Rockett HRM, J. Rockett Melody OD (Lettieriās signature), Pigtronix Octava, and a Dunlop DVP4, all powered by a Strymon Ojai. A TC Electronic TonePrint Plethora X5 pedalboard handles coordination and switching between the devices.
SLASHāS BLUES BALL BAND
Slashās Pedalboard
āI havenāt had a pedalboard in front of my feet since the ā80s,ā Slash told us. But with the Blues Ball tour, he kept it simple, stomping his own boxes. His chain includes a Peterson StroboStomp, Dunlop Cry Baby, MXR CAE Boost/Line Driver, Ibanez TS9 Tube Screamer, MXR EVH90, BBE Soul Vibe Rotary Simulator, Boss DD-3 Digital Delay, and MXR Uni-Vibe, with everything powered by a Voodoo Lab Pedal Power 2 Plus. All pedals are taped down with their settings dialed in. When his signal leaves the board, it hits a Whirlwind Selector A/B box, where it splits off between his amps and his Talk Box rig.
Tash Nealās Pedalboard
Tash Neal keeps a modest pedalboard at his feet: a DāAddario Chromatic Pedal Tuner, Dunlop Cry Baby, XTS Custom Pedals Precision Multi-Drive, EHX Green Russian Big Muff, and a Fender Waylon Jennings Phaser, powered by a T-Rex Fuel Tank.
RANCIDāS MATT FREEMAN
Matt Freemanās Pedalboard
Bassist Matt Freemanās signal goes wireless into one of his Avalon U5 Class A Active Instrument DI and Preamps, and then through a Way Huge Pork Loin Overdrive, set to give his Bassman a good push.
CHRISTONE āKINGFISHā INGRAM
Kingfishās Pedalboard
Kingfishās signal starts with a Shure Wireless BLX4, which hits a Boss TU-3w Chromatic Tuner. From there, the route is a Dunlop Cry Baby Mini Wah, a Marshall ShredMaster, and a Boss DD-3 Delay. The pedals live on a Pedaltrain Nano board and were assembled by Barry OāNeal at XAct Tone Solutions.
DIXIE DREGSā STEVE MORSE
Steve Morseās Pedalboard
Steve plays through a pair of 3-channel Engl Steve Morse signature 100-watt ampsāone wet, one dryābut his pedal chain is relatively simple: a Keeley Compressor, two Ernie Ball volume pedals, two TC Flashbacks, a TC Electronic Polytune, and a foot controller for his Engls.
This Japan-made Guyatone brings back memories of hitchinā rides around the U.S.
This oddball vintage Guyatone has a streak of Jack Kerouacās adventurous, thumbing spirit.
The other day, I saw something I hadnāt noticed in quite some time. Driving home from work, I saw an interesting-looking fellow hitchhiking. When I was a kid, āhitchersā seemed much more common, but, then again, the world didnāt seem as dangerous as today. Heck, I can remember hitching to my uncleās cabin in Bradford, Pennsylvaniaāhome of Zippo lightersāand riding almost 200 miles while I sat in a spare tire in the open bed of a pickup truck! Yes, safety wasnāt a big concern for kids back in the day.
So, as Iām prone to do, I started digging around hitchhiking culture and stories. Surprisingly, there are organized groups that embrace the hitching life, but the practice remains on the fringe in the U.S. Back in the 1950s, writer Jack Kerouac wrote the novel On the Road, which celebrated hitchhiking and exposed readers to the thrill of maverick travel. Heck, even Mike Dugan (the guitarist in all my videos) hitched his way to California in the 1960s. But seeing that fellow on the side of the road also sparked another image in my brain: Yep, it always comes back to guitars.
Let me present to you a guitar thatās ready to go hitching: the Guyatone LG-180T, hailing from 1966. The āthumbs-upā headstock and the big āthumbā on the upper bout always made me think of thumbing a ride, and I bought and sold this guitar so long ago that I had forgotten about it, until I saw that hitchhiking dude. Guyatone was an interesting Japanese company because they were primarily an electronics company, and most of their guitars had their wooden parts produced by other factories. In the case of the LG-180T, the bodies were made by Yamaha in Hamamatsu, Japan. At that time, Yamaha was arguably making the finest Japanese guitars, and the wood on this Guyatone model is outstanding. We donāt often see Guyatone-branded guitars here in the U.S., but a lot of players recognize the early ā60s label Kentāa brand name used by an American importer for Guyatone guitars.
With a bit of imagination, the LG-180Tās āthumbs upā headstock seems to be looking for a roadside ride.
Kent guitars were extremely popular from the early ā60s until around 1966. The U.S. importer B&J fed the American need for electric guitars with several nice Kent models, but when the Guyatone contract ended, so did most of the Kent guitars. After that, Guyatone primarily sold guitars in Japan, so this example is a rare model in the U.S.
āUnless you are a master at guitar setups, this would be a difficult player.ā
This headstock is either the ugliest or the coolest of the Guyatone designs. I canāt decide which. I will say, no other Japanese guitar company ever put out anything like this. You have to give the Guyatone designers a thumbs up for trying to stand out in the crowd! Guyatone decided to forgo an adjustable truss rod in this model, opting instead for a light alloy non-adjustable core to reinforce the neck. Speaking of the neck, this instrument features the most odd-feeling neck. Itās very thin but has a deep shoulder (if that makes any sense). Totally strange!
Another strange feature is the bridge, which offers very little adjustment because of the three large saddles, which sort of rock back and forth with the tremolo. Itās a shame because these pickups sound great! Theyāre very crisp and have plenty of zing, but unless you are a master at guitar set-ups, this would be a difficult player.
This could be why the LG-180T only appeared in the 1966 and 1967 catalogs. After that, it disappeared along with all the other Yamaha-made Guyatone electrics. By 1969, Guyatone had gone bankrupt for the first time, and thus ended guitar production for a few decades. At least we were blessed with some wacky guitar designs we can marvel at while remembering the days when you could play in the back end of an explosive 1973 AMC Gremlin while your mom raced around town. Two thumbs up for surviving our childhoods! PG
There's a lot of musical gold inside the scales.
Intermediate
Intermediate
ā¢ Develop a deeper improvisational vocabulary.
ā¢ Combine pentatonic scales to create new colors.
ā¢ Understand the beauty of diatonic harmony.Improvising over one chord for long stretches of time can be a musician's best friend or worst nightmare. With no harmonic variation, we are left to generate interest through our lines, phrasing, and creativity. When I started learning to improvise, a minor 7 chord and a Dorian mode were the only sounds that I wanted to hear at the time. I found it tremendously helpful to have the harmony stay in one spot while I mined for new ideas to play. Playing over a static chord was crucial in developing my sense of time and phrasing.
The following is the first improvisational device I ever came across. I want to say I got it from a Frank Gambale book. The idea is that there are three minor pentatonic scales "hiding" in any given major scale. If we're in the key of C (CāDāEāFāGāAāB) we can pluck out the D, E, and A minor pentatonic scales. If we frame them over a Dm7 chord, they give us different five-note combinations of the D Dorian mode. In short, we are building minor pentatonic scales off the 2, 3, and 6 of the C major scale.
Viewing this through the lens of D minor (a sibling of C major and the tonal center for this lesson), D minor pentatonic gives us the 1āb3ā4ā5āb7, E minor pentatonic gives us 2ā4ā5ā6ā1, and A minor pentatonic gives us 5āb7ā1ā2ā4. This means you can use your favorite pentatonic licks in three different locations and there are three different sounds we can tap into from the same structure.
If you smashed all of them together, you would get the D Dorian scale (DāEĀĀāFāGāAāBāC) with notes in common between the D, E, and A minor pentatonic scales. Ex. 1 uses all three scales, so you can hear the different colors each one creates over the chord.
Ex. 1
Ex. 2 is how I improvise with them, usually weaving in and out using different positional shapes.
Ex. 2
The next idea is one I stole from a guitarist who often came into a music store I worked at. On the surface, it's very easy: Just take two triads (in our example it will be Dm and C) and ping-pong between them. The D minor triad (DāFāA) gives us 1āb3ā5, which is very much rooted in the chord, and the C major triad (CāEāG) gives us the b7ā9ā4, which is much floatier. Also, if you smash these two triads together, you get 1ā2āb3ā4ā5āb7, which is a minor pentatonic scale with an added 2 (or 9). Eric Johnson uses this sound all the time. Ex. 3 is the lick I stole years ago.
Ex. 3
Ex. 4 is how I would improvise with this concept. Many different fingerings work with these, so experiment until you find a layout that's comfortable for your own playing.
Ex. 4
If two triads work, why not seven? This next approach will take all the triads in the key of C (CāDmāEmāFāGāAmāBdim) and use them over a Dm7 chord (Ex. 5). Each triad highlights different three-note combinations from the Dorian scale, and all of them sound different. Triads are clear structures that sound strong to our ears, and they can generate nice linear interest when played over one chord. Once again, all of this is 100% inside the scale. Ex. 5 is how each triad sounds over the track, and Ex. 6 is my attempt to improvise with them.
Ex. 5
Ex. 6
If we could find all these possibilities with triads, it's logical to make the structure a little bigger and take a similar approach with 7 chords, or in this case, arpeggios. Naturally, all the diatonic chords will work, but I'll limit this next idea to just Dm7, Fmaj7, Am7, and Cmaj7. I love this approach because as you move further away from the Dm7 shape, each new structure takes out a chord tone and replaces it with an extension. I notice that I usually come up with different lines when I'm thinking about different chord shapes, and this approach is a decent way to facilitate that. Ex. 7 is a good way to get these under your fingers. Just ascend one shape, shift into the next shape on the highest string, then descend and shift to the next on the lowest string.
Ex. 7
Ex. 8 is my improvisation using all four shapes and sounds, but I lean pretty heavily on the Am7.
Ex. 8
This last concept has kept me busy on the fretboard for the last five years or so. Check it out: You can take any idea that works over Dm7 and move the other diatonic chords. The result is six variations of your original lick. In Ex. 9 I play a line that is 4ā1āb3Āā5 over Dm7 and then walk it through the other chords in the key. These notes are still in the key of C, but it sounds drastically different from playing a scale.
Ex. 9
In Ex. 10, I try to think about the shapes from the previous example, but I break up the note order in a random but fun way. The ending line is random but felt good, so I left it in.
Ex. 10
While all these concepts have been presented over a minor chord, you can just as easily apply them to any chord quality, and they work just as well in harmonic or melodic minor. Rewarding sounds are available right inside the harmony, and I am still discovering new ideas through these concepts after many years.
Though the above ideas won't necessarily be appropriate for every style or situation, they will work in quite a few. Developing any approach to the point that it becomes a natural extension of your playing takes considerable work and patience, so just enjoy the process, experiment, and let your ear guide you to the sounds you like. Even over just one chord, there is always something new to find.
Building upon the foundation of the beloved Core Collection H-535, this versatile instrument is designed to serve as a masterpiece in tone.
The new model features striking aesthetic updates and refined tonal enhancements. Crafted at the iconic 225 Parsons Street factory, home to other world-famous models like the H-150, H-157, and H-575 - the H-555 continues to exemplify the very best of American craftsmanship.
The Core Collection H-555 features a set of Custom Shop 225 Hot Classic Humbuckers, meticulously wound in-house with carefully selected components, and voiced to deliver added punch and richness while preserving exceptional dynamics and touch sensitivity. Seamlessly complementing the H-555ās semi-hollow construction, they blend warmth and woodiness with refined, articulate clarity.
The Core Collection H-555ās aesthetic has been elevated with multi-ply binding on the body, headstock, and pickguard. Its neck, sculpted in a classic ā50s profile, delivers effortless comfort and is adorned with elegant block inlays, seamlessly blending style with playability. Gold hardware complements the aesthetic, exuding elegance while presenting the H-555 as a truly premium and versatile instrument for the discerning player.
Available in Ebony and Trans Cherry, each Core Collection H-555 is beautifully finished with a nitrocellulose vintage gloss that features a subtle shine and gracefully ages over time. An Artisan Aged option is also available for those seeking an authentically well-loved look and feel, achieved through a meticulous, entirely hand-finished aging process. The new Core Collection continues Heritageās tradition of world-class craftsmanship, offering a true masterpiece in tone and design for discerning players. Each guitar is shipped in a premium Heritage Custom Shop hard case.
Key Features
- Finest Tonewoods: Laminated highly figured Curly Maple (Top & Back) with solid Curly Maple sides
- Heritage Custom Shop 225 Hot Classic Humbuckers: Designed and wound in-house
- Headstock: Multi-ply bound headstock, featuring a Kite inlay, 3Ć3 tuners laser-etched with Heritage graphics
- Neck Profile: Comfortable ā50s C-shape for a vintage feel
- Bridge: Tune-O-Matic with aluminum stopbar tailpiece for enhanced sustain
- Made in the USA: Crafted at 225 Parsons Street
For more information, please visit heritageguitars.com.