
A flexible stomp that spans overdrive and fuzz modes, and sometimes seems to blend them in an inspiring way.
A very juicy, creamy, dynamic fuzz tone that’s well suited to many styles. Bonus slate of drive tones.
Crown-mounted knobs can be tricky to see.
$199
Beetronics Nectar
beetronicsfx.com
If you imagine a gain-pedal spectrum, fuzz is usually situated at one end and boost at the other. The Nectar, from California builder Beetronics, makes it possible to explore both extremes in a single pedal. It also beautifully blurs the lines between those extremes, generating fuzzy overdrive, and thicker, more OD-like fuzz within its wide range.
Beebadoobee Built
Ask Beetronics why they chose to explore the realm of fuzz and overdrive in a single pedal and the likely answer will be “because we could.” Indeed, Beetronics tends to march to its own drum. With just a single footswitch, there are limitations to Beetronics’ take on the concept. Most players that use fuzz and overdrive use two different pedals, or a larger pedal that uses two footswitches to access the two circuits together or independently. Here, you have to use a toggle on the pedal’s crown. But for players that love saving space, having one little pedal that can cover it all is an appealing proposition. Another is how the Nectar’s tones often seem to blend fuzz and overdrive, creating complex dirt sounds.
The Nectar doesn’t mark the first time Beetronics dabbled in fuzz/overdrive fusion. The Royal Jelly runs the two effects side by side, in a much larger three-footswitch, seven-knob pedal. Nectar takes a more economical approach. Apart from the fuzz/drive mode toggle, there are knobs for output volume, “honey,” which controls the gain, and “taste,” which is a dark-to-bright tone knob. All are mounted on the pedal’s crown, which can make it tricky to see your settings on the fly, but it’s easy to navigate the controls by feel after a little practice. The Nectar is a very what-you-see-is-what-you-get kind of pedal, with no secret settings or hidden controls or sub menus.
Beetronics pedals are very nicely built. And they have made it a signature of sorts to creatively stretch the meaning of “printed” in printed circuit board—adorning it with a floral graphic similar to the one on the plastic plate on the pedal’s face. Checking out this nifty internal touch is, however, the only reason to remove the plate. There’s no battery connection inside and the pedal is run by an external 9V DC supply only.
Bouncing the Beebop
The core tone in the Nectar’s fuzz mode, which I’m guessing many players will use the most, is rich, creamy, dynamic, and full of sustain. It strikes me as voiced to appeal to a wide range of guitarists and playing approaches. And at the risk of over-egging the metaphor pudding, it is undeniably honey-like, rather than a reproduction of the harsh, edgy, Velcro-like tones you associate with early fuzz boxes. Such smoothness—some might hear a balanced, contemporary distortion— means the Nectar works across genres without sounding too vintage, which is a good thing, in my opinion.
That said, the Nectar’s fuzz mode can sting when the taste knob is up high. With some guitar/amp combinations, you might even hear traces of harshness. But it is mostly appealingly sweet and luscious at heart, and there is so much range in the gain control that you might be tempted to skip the drive mode. Right up to around 10 o’clock on the honey knob, the fuzz maintains a thick, clear, edge-of-breakup response that’s very dynamic and definitely well south of true fuzz in terms of gain. It’s an appealing overdrive alternative.
As rich as the fuzz mode’s low-gain sounds are, the drive side’s fat-boost and low-gain overdrive sounds offer a practical alternative to fuzz mode. Real breakup, predictably, happens much deeper in the honey control’s range. And when you max it, the drive mode gets aggressive, with a throaty bark reminiscent of, if not precisely like, the MXR Distortion+. It’s a gutsy sound and adds character and muscle to any guitar you put in front of it. In drive mode, the Nectar also stacks well with other overdrives. I love how it meshed with a Marshall-like JHS Angry Charlie and a Tsakalis Six (which approximates the Paul Cochrane Timmy, Marshall Bluesbreaker, and Analog Man King of Tone) without devolving into a muddled mess.
The Verdict
With a tonal range that bridges brawny boost and a particularly delectable fuzz, it’s hard to avoid wishing the compact Nectar’s two modes were footswitchable rather than toggle activated. Still, the sounds alone, which mostly manage to avoid glitchy, spitty fuzz and tend more toward the smooth, creamy side of drive, will appeal to a lot of players that like their gain devices more predictable than unruly.
- DIY Pedalboard Build ›
- Stomp School: What's Inside Your Pedals? ›
- Confessions of a Pedal Nerd ›
- Introducing Beetronics' Tuna Fuzz: A Unique Stompbox - Premier Guitar ›
Do you overuse vibrato? Could you survive without it?
Vibrato is a powerful tool, but it should be used intentionally. Different players have different styles—B.B. King’s shake, Clapton’s subtle touch—but the key is control. Tom Butwin suggests a few exercises to build awareness, tone, and touch.
The goal? Find a balance—don’t overdo it, but don’t avoid it completely. Try it out and see how it changes your playing!
The author dials in one of his 20-watt Sonzera amps, with an extension cabinet.
Knowing how guitar amplifiers were developed and have evolved is important to understanding why they sound the way they do when you’re plugged in.
Let’s talk about guitar amp history. I think it’s important for guitar players to have a general overview of amplifiers, so the sound makes more sense when they plug in. As far as I can figure out, guitar amps originally came from radios—although I’ve never had the opportunity to interview the inventors of the original amps. Early tube amps looked like radio boxes, and once there was an AM signal, it needed to be amplified through a speaker so you could hear it. I’m reasonably certain that other people know more about this than I do.
For me, the story of guitar amps picks up with early Fenders and Marshalls. If you look at the schematics, amplifier input, and tone control layout of an early tweed Fender Bassman, it’s clear that’s where the original Marshall JTM45 amps came from. Also, I’ve heard secondhand that the early Marshall cabinets were 8x12s, and the roadies requested that Marshall cut them in half so they became 4x12s. Similarly, 8x10 SVT cabinets were cut in half to make the now-industry-standard 4x10 bass cabinets. Our amp designer Doug Sewell and I understand that, for the early Fender amps we love, the design directed the guitar signal into half a tube, into a tone stack, into another half a tube, and the reverb would join it with another half a tube, and then there would be a phase splitter and output tubes and a transformer. (All 12AX7 tubes are really two tubes in one, so when I say a half-tube, I’m saying we’re using only the first half.) The tone stack and layout of these amps is an industry standard and have a beautiful, clean way of removing low midrange to clear up the sound of the guitar. I believe all but the first Marshalls came from a high-powered tweed Twin preamp (which was a 80-watt combo amp) and a Bassman power amp. The schematic was a little different. It was one half-tube into a full-tube cathode follower, into a more midrange-y tone stack, into the phase splitter and power tubes and output transformer. Both of these circuits have different kinds of sounds. What’s interesting is Marshall kept modifying their amps for less bass, more high midrange and treble, and more gain. In addition, master volume controls started being added by Fender and Marshall around 1976. The goal was to give more gain at less volume. Understanding these circuits has been a lifelong event for Doug and me.
Then, another designer came along by the name of Alexander Dumble. He modified the tone stack in Fender amps so you could get more bass and a different kind of midrange. Then, after the preamp, he put in a distortion circuit in a switchable in and out “loop.” In this arrangement, the distortion was like putting a distortion pedal in a loop after the tone controls. In a Fender amp, most of the distortion comes from the output section, so turning the tone controls changes the sound of the guitar, not the distortion. In a Marshall, the distortion comes before the tone controls, so when you turn the tone controls, the distortion changes. The way these amps compress and add harmonics as you turn up the gain is the game. All of these designs have real merit and are the basis of our modern tube–and then modeling—amplifiers.
Everything in these amps makes a difference. The circuits, the capacitor values and types, the resistor values and types, the power and output transformers, and the power supplies—including all those capacitor values and capacitor manufacturers.
I give you this truncated, general history to let you know that the amp business is just as complicated as the guitar business. I didn’t even mention the speakers or speaker cabinets and the artform behind those. But what’s most important is: When you plug into the amp, do you like it? And how much do you like it? Most guitar players have not played through a real Dumble or even a real blackface Deluxe Reverb or a 1966 Marshall plexi head. In a way, you’re trusting the amp designers to understand all the highly complex variations from this history, and then make a product that you love playing through. It’s daunting, but I love it. There is a complicated, deep, and rich history that has influenced and shaped how amps are made today.
Lenny Kravitz’s lead-guitar maestro shares how his scorching hit solo came together.
Hold onto your hats—Shred With Shifty is back! This time, Chris Shiflett sits down with fellow west coaster Craig Ross, who calls in from Madrid equipped with a lawsuit-era Ibanez 2393. The two buddies kick things off commiserating over an increasingly common tragedy for guitarists: losing precious gear in natural disasters. The takeaway? Don’t leave your gear in storage! Take it on the road!
Ross started out in the Los Angeles band Broken Homes, influenced by Chuck Berry, Buddy Holly, and the Beatles, but his big break came when he auditioned for Lenny Kravitz. Kravitz phoned him up the next day to tell him to be at rehearsal that evening. In 1993, they cut one of their biggest hits ever, “Are You Gonna Go My Way?” Ross explains that it came together from a loose, improvisatory jam in the studio—testament to the magic that can be found off-leash during studio time.
Ross recalls his rig for recording the solo, which consisted of just two items: Kravitz’s goldtop Les Paul and a tiny Gibson combo. (No fuzz or drive pedals, sorry Chris.) As Ross remembers, he was going for a Cream-era Clapton sound with the solo, which jumps between pentatonic and pentatonic major scales.
Tune in to learn how he frets and plays the song’s blistering lead bits, plus learn about what amps Ross is leaning on these days.
If you’re able to help, here are some charities aimed at assisting musicians affected by the fires in L.A:
https://guitarcenterfoundation.org
https://www.cciarts.org/relief.html
https://www.musiciansfoundation.org
https://fireaidla.org
https://www.musicares.org
https://www.sweetrelief.org
Credits
Producer: Jason Shadrick
Executive Producers: Brady Sadler and Jake Brennan for Double Elvis
Engineering Support by Matt Tahaney and Matt Beaudion
Video Editor: Addison Sauvan
Graphic Design: Megan Pralle
Special thanks to Chris Peterson, Greg Nacron, and the entire Volume.com crew.
Tobias bass guitars, beloved by bass players for nearly half a century, are back with the all-new Tobias Original Collection.
Built for unrivaled articulation, low-end punch, and exceptional ergonomics, the all-new Tobias Original Collection comprises an array of six four and five-string bass models all offered in both right and left-handed orientations. The Tobias range features Classic, Killer B, and Growler models, and each is equipped with high-quality hardware from Babicz and Gotoh, active electronics from Bartolini, and the iconic Tobias asymmetrical neck design. Crafted from the finest tonewoods, Tobias Original Collection bass guitars are now available worldwide on Gibson.com, at the Gibson Garage locations, and at authorized Gibson dealers.
The bass world has been clamoring for the return of the authentic, high-end Tobias basses, and now, Tobias has returned. Combining the look and tone of the finest exotic tonewoods, such as quilted maple, royal paulownia, purpleheart, sapele, walnut, ebony, and wenge, with the feel of the famous Tobias Asym asymmetrical neck and the eye-catching shapes of the perfectly balanced contoured bodies, Tobias basses are attractive in look and exceptional in playing feel. However, their sonic versatility is what makes them so well suited to the needs of modern bassists. The superior tone from the exotic hardwoods, premium hardware, and active Bartolini® pickups and preamps results in basses with the tonal flexibility that today’s players require. Don’t settle for less than a bass that delivers everything you want and need –the look, the feel, and the sound, Tobias.
“I’m thrilled to release Tobias basses, emphasizing the use of exotic woods, ergonomics, and authenticity to the original Tobias basses,” says Aljon Go, Product Development Manager for Tobias, Epiphone, and Kramer. “This revival is a dream come true, blending modern craftsmanship with the timeless essence of Tobias.”
“It’s amazing to see this icon of the bass world return,” adds Andrew Ladner, Brand Manager for Epiphone and Kramer. “These models are truly a bass player’s bass, and true to the DNA that makes Tobias world-class—the ace up the sleeve of bass players around the globe since 1978. Today’s players can find that unique voice and feel that only Tobias can offer.”
For more information, please visit gibson.com.