Premier Guitar features affiliate links to help support our content. We may earn a commission on any affiliated purchases.

Death By Audio Exploding Head Review

Death By Audio Exploding Head Review

A clever triple-delay offers infinite avenues to echo bliss.

Mysterious, hazy, and uncommon echo colors. A cool break from the same-old-delay blues. Streamlined design.

Clock noise could turn off some users. Limited numbers available—so far.

$225

Death By Audio Exploding Head
deathbyaudio.com

4.5
4.5
4
4.5

If you don’t follow the many-splendored musical world of noisy psychedelia, you might be surprised to know that Oliver Ackermann, co-founder of the sometimes psychotic but often thrilling stompbox concern Death By Audio, also helms the equally psychotic and thrilling band A Place to Bury Strangers. If you’ve seen APTBS live, you’ll understand much about what makes Death By Audio pedals unconventional. APTBS is generally a sensory overload experience. They are loud, sonically confrontational, and capable of oscillating between chaos and dark beauty. Last year marked the 13th anniversary of the band’s breakthrough LP, Exploding Head, and,in typically perverse fashion, Ackermann elected to celebrate that most unlucky of anniversaries with a triple delay named in the LP’s honor.


In very relative terms, the Exploding Head seems normal compared to many DBA pedals. It’s three identical delays run in series. Simple, right? But that simplicity belies great range and a deep capacity for weirdness and subtlety. Exploding Head creates washy reverbs, percussive multi-head delay effects, and mutant delays that chatter like rogue tremolos. It can feel quirky and tricky to handle as you get to know it’s weird ways. But mastering just a few simple tricks makes the Exploding Head an engaging, painterly, and even practical effect.

Honed To Honor the Head

Delays arranged in series are one of the coolest ways to mangle and massage sound and time. I often prefer the texture and complexity of two simple delays to traditional delay-and-reverb setups because fewer overtones and harmonics go missing in the wash. In fact, a two-delay setup can actually enhance certain overtones as echoes intertwine and collide. The Exploding Head expands on this concept and enables deep exploration of those interrelationships.

The Exploding Head is effectively an evolution of DBA’s own extinct and much-coveted Ghost Delay—an effect instrumental in creating the blown out, industrial, Jesus and Mary Chain-meets-Isn’t Anything haze of Exploding Head. The Ghost Delay utilized three cascading delays as well, but featured preset wet/dry blends instead of the three independent blend controls on the Exploding Head. That design change, however, makes a big difference.

”The bright, rhythmic underpinning of the echoes makes individual delay lines more distinct as you add in others.“

Controls are superficially simple. There are delay time, feedback, and wet/dry blend knobs, just as you’d see on any delay. But like an analog synthesizer, the interactivity between the three cascading sets of controls makes it hard to replicate sounds precisely, and there are no presets or digital control. Practice and tuning your ear to the pedal’s quirks and tendencies helps you engineer roughly identical setups pretty readily. Still, I was inclined to snap pictures of settings that made my favorite sounds—just in case.

Exploding Head’s infinity switch is another treat that distinguishes it from the Ghost Delay. Engaging it feeds the output from the third delay in the sequence (red) into the first (black), which enables momentary self-oscillation effects. The addition of this option—on top of a delay array that already lives happily at the edge of feedback and creates blurry washes of polyrhythms—makes the Exploding Head a delightful chaos engine if you choose to take it there.

Willows and Hurricanes

The Exploding Head’s chaotic side is a big part of the pedal’s personality. But it can be civilized and subdued, too. It happily generates trad delay textures. And when you get a feel for how Exploding Head works as an organism, you’ll find a varied lot of echo colors that are as familiar as they are freaked out.

While digital, the basic tonality of a single Exploding Head delay line is not worlds apart from a bright analog echo. It’s a touch trebly. There is also perceptible clock noise at many settings, just like an analog unit. This can be jarring at first if you like your delay lush and dreamy, but the bright, rhythmic underpinning of the echoes make individual delay lines more distinct as you add in others, which also has a thickening and darkening effect that blunts the clock noise.

A good place to start exploration of the Exploding Head is to turn all the blend controls to completely dry settings, set the time and feedback controls to near-identical levels (each at high noon is a good place to start,) and then advance the blend of the first delay until it sounds right. As you slowly, incrementally elevate the blend levels of the other delays and shift the other parameters, you’ll hear the signal get thicker and wider. And, depending on your time and blend settings, the pedal will generate wild multi-head patterns or subtler variations that have the quality of tremolo or chorusing.

Like any delay, you can use short delay times, dry blends, and long feedback levels to approximate reverb textures. These are a great addition to composite delay images in any position. But I found that situating reverb-like textures in the middle position enables the most ambient colors. The middle delay can also be critical in creating polyrhythmic echoes. Mating a delay-forward blend setting to an odd subdivision of the first delay generates complex percolating repeats that vary in volume. It sounds a little like a multi-head delay arranged via William Burroughs cut-up method—disorienting but also a source of sound poetry that shifts your perspective dramatically.

The Verdict

It seems preposterous to try to assign ratings to the Exploding Head. Some players will find great utility in the pedal, readily encounter beauty in theintermingled echoes, and get blissfully lost exploring the interactive controls. Other players will be baffled. Given that, a prospective customer should be prepared to round up or down—particularly where the tone and ease of use scores are concerned.

One thing all users will agree on, though, is that the Exploding Head sounds colossal. And with a loud amplifier, it sounds wonderfully alive. In the absence of presets, you’ll have to be pretty fearless to make changes to the controls on the fly. But perhaps a chain of Exploding Heads is the answer? That would be an expensive proposition. But it might actually result in few exploding heads, too.

With a team of experts on hand, we look at six workhorse vintage amps you can still find for around $1,000 or less.

If you survey the gear that shows up on stages and studios for long enough, you’ll spot some patterns in the kinds of guitar amplification players are using. There’s the rotating cast of backline badasses that do the bulk of the work cranking it out every day and night—we’re all looking at you, ’65 Deluxe Reverb reissue.

Read MoreShow less

Amazon Prime Day is here (July 16-17). Whether you're a veteran player or just picking up your first guitar, these are some bargains you don't want to miss. Check out more deals here! https://amzn.to/3LskPRV

Read MoreShow less

A technicolor swirl of distortion, drive, boost, and ferocious fuzz.

Summons a wealth of engaging, and often unique, boost, drive, distortion, and fuzz tones that deviate from common templates. Interactive controls.

Finding just-right tones, while rewarding, might demand patience from less assured and experienced drive-pedal users. Tone control could be more nuanced.

$199

Danelectro Nichols 1966
danelectro.com

4.5
4
4
4.5

The Danelectro Nichols 1966, in spite of its simplicity, feels and sounds like a stompbox people will use in about a million different ways. Its creator, Steve Ridinger, who built the first version as an industrious Angeleno teen in 1966, modestly calls the China-made Nichols 1966 a cross between a fuzz and a distortion. And, at many settings, it is most certainly that.

Read MoreShow less

The author standing next to a Richardson gunstock lathe purchased from Gibson’s Kalamazoo factory. It was used to make six necks at a time at Gibson in the 1950s and 1960s.

Keep your head down and put in the work if you want to succeed in the gear-building business.

The accelerated commodification of musical instruments during the late 20th century conjures up visions of massive factories churning out violins, pianos, and, of course, fretted instruments. Even the venerable builders of the so-called “golden age” were not exactly the boutique luthier shops of our imagination.

Read MoreShow less