Open-string licks, hand-wrenching bends, blazing double-stops, and much more.
Intermediate
Intermediate
- Learn how to incorporate outside notes to a Mixolydian scale.
- Understand how to phrase in both traditional and modern country settings.
- Create a deeper vocabulary over dominant chords.
How many times are you paralyzed by the sheer number of options you can play over a dominant chord? It’s probably one of the only chords where nearly anything works if you land correctly. One of the most common sounds to use is the Mixolydian scale, which is simply a major scale with a lowered 7. But let’s add on to this sound by expanding our musical Mixolydian palette with a few blue notes and some chromatic embellishments.
The first four examples will be played over a “train” beat. Think more old-school and traditional country. We will look at a few modern applications later on. In Ex. 1 we are thinking C Mixolydian (C–D–E–F–G–A–Bb) over a C major chord. It’s very common to treat major chords as dominants. Other than the hammer-on to the 3 on beat 3 the entire lick falls nicely within the scale.
Ex. 2 is a nice way to incorporate open-string ideas over a major I chord (in this case, C). The back half of the lick has a nice chromatic passing tone that leads nicely into the next chord (F). Make sure to let each note ring out as long as possible.
Connecting chord tones is a crucial element of country guitar. In Ex. 3 I start with a double-stop that directly outlines the essential notes of an F7 chord (Eb and A) before I slip into another double-strop phrase that hints around that same sound. In measure 2 I approach the chord tones of a G major triad (G–B–D) chromatically before winding things up with a trademark country bend.
Ex. 4 is an alternate way of approaching the same two chords (F and G). This would be more how a pedal-steel player might phrase the line. The string of sixths gives the pre-bends a connecting theme. Make sure to hold the last bend, hit the G on the 1st string twice, then release. This creates cool tension that resolves nicely back into the C chord.
You now have several ideas that work well over a 1–4–5 progression on a train beat that’s common to more traditional country. Let’s move to a different groove and vibe that might be considered more modern.
Ex. 5 is played over a E7 chord. This one gets to the heart of using chromatic connecting notes or passing tones. You can really hear the tension the extra possibilities add to this slippery lick.
This lick (Ex. 6) reminds me of how Larry Carlton might approach playing over a E7 chord. Once again, using notes not found in the Mixolydian scale offers a different texture to the musical line, especially the slides in the first measure and the chromatic approaches to the root and 3 in the second measure.
Same groove, different chords. In this case (Ex. 7), one measure of G and one of A. I approach the 3 of the G chord by a half-step right at the top and then repeat it an octave up in the next beat before immediate descending back down to the open 3rd string. The double-stops in the second measure offer a hint of tension before resolving on beat 3.
Ex. 8 is a “no frills” approach and sticks entirely within the A Mixolydian scale (A–B–C#–D–E–F#–G). The entire second measure reminds me of the main lick to Eagles’ “Life in the Fast Lane.”
So, there you have it. More note options will lead to more possibilities to choose from. Some examples just add one extra note, others much more than that. The most important thing is finding what works for you. Until next time!
- Don't Sleep on the Mixolydian Mode - Premier Guitar ›
- How Do You Use the Mixolydian Scale? - Premier Guitar ›
- Pluck 'Em! A Crash Course in Country Guitar - Premier Guitar ›
By splitting your signal into low- and high-frequency bands, and feeding them to separate effects loops, the XO lends a new, expansive vocabulary to the effects you already have.
Smart, intuitive controls. Exponentially widens the tone potential of just a few effects. High quality construction
Players with limited use for such effects will consider it expensive.
$279
Great Eastern FX
greateasternfx.com
Though some musicians consider it a chore, I relish the creative possibilities associated with mixing a song or record. Working with the Great Eastern FX XO Variable Crossover feels a lot like the process of experimental mixing using EQ and outboard effects. The concept is simple: The XO splits the low and high frequencies from your input into two separate bands, which are routed via corresponding send and return jacks to different effects or series of them.
Depending on how you set the crossover frequency, the return balance, dry blend, and phase, you can fluidly shape, blend, and move between sounds that are subtly different or radically deconstructed. On the surface, it might look and sound like a cumbersome process. In reality, it’s intuitive, fun, and full of surprises
Fear Not the Frequency Shift
The XO’s control set will probably look alien to most guitarists. The largest knob controls the crossover frequency, which determines the point at which the full frequency band is divided and sent to the low and high send and return. The range button just to its right selects two frequency ranges: 50 to 600 Hz, or 300 Hz to 3.4 kHz. The first is recommended for use with bass, the second for guitar, but you can experiment with either setting for any instrument. The return balance knob sets the relative levels of the two effects returns and the dry blend knob performs its namesake task. The phase button can be used to either correct phase issues when the two bands are out of phase or applied creatively to fashion out-of-phase variations on a sound. A very useful send button, meanwhile, switches the high and low sends, enabling instantaneous selection of mirror-image frequency and effects mixes.
Mutating Tone Tangles
My first experiments with the XO were simple: sending the low band to a delay with long repeats and the high band to another delay with fast repeats, lurking just at the brink of oscillation. The ways I could blend these divided and reconstituted tone composites were often unexpected, surprising, and totally inspiring. I could set up signals that found trebly repeats hovering at the edge of feedback, while low and low-mid frequencies (which can overwhelm a self-oscillating signal) provided a fat foundation for the resonant, ringing top end—a totally cool sound that responded in really interesting ways to picking dynamics and different rhythmic patterns. In a modification of that formula, I routed an intensely throbbing Vox Repeat Percussion clone, slow-sweeping phaser, and long-repeat delay to the low band and assigned a clean, heavily compressed, slapback to the high frequencies. In this configuration, simple folk-rock chords and melodic lead lines took on complex, alien alter egos, sometimes sounding like two players—one handling a bubbling bass synth, and a guitarist carrying the tune via the clear detailed high end. When the pulsing low end got tiresome, it was easy to dial in more dry signal via the dry-blend knob or dial in a mix favoring the tighter, chiming high band.
“Simple folk-rock chords and melodic lead lines took on complex, alien alter egos, sometimes sounding like two players.”
The spins you can put on these recipes are endless. Situating an octave-down pedal amid the tremolo and phaser made the two bands even more distinctive and heightened the illusion of a guitarist and synth player working together. You can mix fuzzy, thumping low end with ringing and heavily chorused top-end output. Or you can blend two similar but distinct effects to create oddly chorused and powerful widescreen tonalities.
The cool part of all this potential is that it can be realized with a single amp and just a few pedals. Some of my most radical sounds came via just four or five pedals including the XO, which adds up to a very modest and portable array, all things considered. Players that work with pedalboards that count stomps in the double digits could disappear in labyrinths of sound that are as immersive as those afforded by synthesis. And while XO is, after some practice, easy to control, the new, chaotic molecular reactions provoked by unorthodox stimulation of your pedals all but guarantees unique results. You will definitely find new sounds and new ways to play and compose here.
The Verdict
The XO Variable Crossover is more likely to see service as a studio tool than become a staple of live setups, though plenty of courageous musicians will find it practical in that environment. Although the mechanics and principles behind its workings can seem complex at first, it can be used effectively and dramatically with just a few stompboxes. The sounds and voices it can extract from, say, a phaser and a delay are exponentially greater in number than what you’d get by simply using two such effects in series, even if some of them are subtle. And the ability to manipulate and warp these sounds on the fly with the XO’s elegant, simple control interface could bring out your inner Lee “Scratch” Perry or DJ Shadow—creating new moods, scenes, and tapestries that can turn a simple song or riff into a moving, mutable, and flowing tone story.
Cardinal Black's guitar slinger explains the bond he's formed with the overlooked goldtop.
The T-style Big Mamie has a teak body, roasted-flame-maple neck, and ebony fretboard.
Built with wood from a World War II battleship, this reader’s guitar holds a lot of history.
I love it when guitars and history come together.
My newest guitar, “Big Mamie,” was built with original teak from the deck of the USS Massachusetts (BB-59). This wood saw action in World War II, during multiple campaigns in the 1940s.
I was checking Facebook one day and I saw a post from Battleship Cove (located in Fall River, Massachusetts) where they were auctioning off this Telecaster-style body crafted by Rhode Island luthier Vincent Goulart. The proceeds of the auction would go to helping restore the battleship.
I knew I had to have it. Not only was this a piece of United States and Massachusetts history, but it held a special place in my memories. When I was a kid, my grandparents would take us to Battleship Cove where we’d explore the ships, the submarine, and the historical displays. Later, when I had my own kids, we’d visit and do overnight sleepovers with Scouts. We slept on “Big Mamie” and walked the decks from where this wood was taken.
Daniel had Big Mamie’s neckplate custom laser-engraved with a silhouette of the USS Massachusetts (BB-59), and the dates that can be seen on the battleship’s plaque.
After winning the auction, I was connected to Vincent and he told me the story of how he came to build this body for the restoration fundraiser. He’s a talented luthier, but each of his guitars has to have a unique history/story. This was right up his alley!
We spoke a few times, discussing what I liked to play, and how I’d like the finished guitar to look and sound. In the end, I decided on some standard Fender chrome components for tuners, neck plate, ferrules, etc. For the pickups, I went with Lindy Fralin Blues Specials. The controls are also from Fralin; I decided on the flipped-control orientation with the push-pull mods for the volume engage/disengage and tone caps (.02 MFD and 0.047 MFD, film and oil, respectively).
The vintage/modern roasted-flame-maple neck, with an ebony fretboard, was custom ordered from Warmoth. The neck had an adventure all of its own after initially being lost in shipment. It finally showed up about a week or two after being written off as lost (and after a new order was placed).
“Now I have a piece of history here in my room that I can pass down to my family.”
For the neck plate, I had it custom laser-engraved with a silhouette of the battleship and dates from an onboard plaque. The strap, from Well-Hung Guitar Straps in Canada, fits the patriotic theme. I’m also using oversized strap buttons from Well-Hung.
Over a couple visits to Vincent’s place, he helped me put together all the components and bring “Big Mamie” to life. Now I have a piece of history here in my room that I can pass down to my family. It also gives me a reason to work on my admittedly novice guitar skills.
These pedals are designed with fast response times, versatile routing options, and durable construction.
ISP Technologies has introduced the latest generation of their pioneering noise reduction products: the Decimator X Pedal Series for guitarists and bassists.
Building upon the legacy of ISP’s earlier Decimator pedals, the new Decimator X models utilize cutting-edge patented circuitry to get rid of unwanted noise and 60-cycle hum, effectively eliminating even the most stubborn background noise.
The pedals offer lightning-fast response times and ultra-smooth decay with enhanced tracking technology. If you’re playing staccato, with or without pauses, or if you desire a nice long decay, this technology allows for a natural sound and feel. You can preserve the integrity of your tone, even during fast-paced passages and intricate playing.
Whether you’re running a complex pedalboard setup or keeping it simple, the Decimator X pedals offer versatile routing options to suit your needs. With flexible input and output configurations, you can easily integrate the pedals into any rig, ensuring maximum compatibility and convenience.
ISP offers two variations of the pedal depending on your routing needs. The standard Decimator Xsimply has an IN and OUT jack. You place this pedal in your rig after your gain or noise-prone pedals. The THRESHOLD control is set based on the noise coming into the IN jack.
The Decimator X G-String provides 4 jacks: GUITAR IN, GUITAR OUT, DECIMATOR IN, and DECIMATOROUT. This provides a direct connection from the GUITAR and the direct GUITAR signal is used to control the block of DECIMATOR noise reduction. This allows you to insert your noisy pedals between GUITAROUT and DECIMATOR IN, but the DECIMATOR noise reduction is controlled by the direct GUITAR signal at the GUITAR IN. This configuration offers an important advantage: you can switch from extreme high gain to crunch or clean and never need to re-adjust the threshold control on the pedal, because the direct guitar signal is used to control the noise reduction block.
Built like a tank, the X pedals are housed in a durable enclosure, designed to withstand the demands of the gigging musician and provide reliable performance night after night. Both pedals have a battery compartment for a 9-volt battery and provide a 5.5mm barrel connector for use with a standard external 9-volt DC power adaptor. The new Decimator X carries a $146.72 street price; the Decimator X G-string carries a $236.42 street price.
For further information visit isptechnologies.com.