Behind every radio hit is a group of guitarists who've created ear-catching parts. Check out these tips and tricks used by some of Music Cityās most in-demand sidemen.
Intermediate
Beginner
ā¢ Learn how to use "box" patterns to create licks in different keys.
ā¢ Understand how to use open-string drones to create signature parts.
ā¢ Hone your ability to play melodic slide-guitar textures.
I feel a little embarrassed when people ask me about my guitar influences. I can't claim expertise of Hendrix, I haven't spent hours woodshedding Eric Johnson, and I couldn't tell you the first thing about how to play like David Gilmour. My influences are more behind the scenes, lurking in the shadows of the music industry. They don't have big names, but they are monster players. I'm talking about the number one, most honest influence on my guitar playing: Nashville session guitarists.
In case you don't know, Nashville session guitarists are the cream of the cropāthey have to be. Their job is to listen to a song once, write a chart for it during that single listen, step out onto the tracking room floor and simultaneously create, react, and execute a guitar part at a radio-perfect level in one take. I've figured out some tricks by studying the work of musical sharpshooters like J.T. Corenflos, Kenny Greenberg, and Tom Bukovac, and now I get to apply it in my own career when I'm called in for a session. Now, let's steal some tricks.
āKiss You in the Morning" Box
An important thing to remember throughout this lesson is that the goal is to sound perfect. A dead note on your guitar solo should not be the reason that one of your fellow session players is late to pick up his daughter, so this is no time for finger tapping or seven-fret stretches. I call this the "Kiss You in the Morning" box because it's similar to the signature lick in Michael Ray's song of the same name.
You want the song to sound good, which means you need to sound comfortable. That's why this pattern (Ex. 1) is a great home base for your chord-based riffing. This is a segment of a diagonal major pentatonic scale that only uses your first and third fretting-hand fingers. You don't have to stretch or remember complicated patterns, and it's almost impossible to sound bad here. Place your first finger on the chord's root, which falls on either the low 6th or 5th string, and slide your third finger up two frets to access the rest of the pentatonic notes. It's a closed shape, so you can move it all over the fretboard to whatever key or chord you need, which comes in handy when you're scanning down a Nashville number-style chart in real time and having to come up with a hook or rhythmic motif.
The āAll About Tonight" Box
This one is a little tougher, but more rewarding. I could do an entire session just using this box and rearranging the notes in different ways to make my melodies and textures fit the mood of the song. You can hear hints of this pattern in Blake Shelton's "All About Tonight." This is a natural extension to the previous example, but in Ex. 2 we start to introduce double-stops (playing two notes at a time). Low notes on the lower strings sound thick on their own, but as you move up the neck it's a good idea to start using double-stops if you want to keep the guitar sounding thick. In this box, your first finger is always in charge of the same fret, and your third finger oversees hammer-ons two frets higher. To play the double-stops I'm talking about, barre the 5th and 4th strings with your first finger and pick them. Then hammer on the 5th string with your third finger. Boom. You can do the same trick with different string sets.
Open for Business
You've got some lead chops built up, but somebody will be singing for 90 percent of the song, so what do you do? In keeping with our rule that we want our playing to sound comfortable, the answer is open chords. Full barre chords give you a lot of strings to keep track of, and if your dynamics, sustain, and muting aren't spot on, then the producer is going to have to hire someone to redo your parts after you leave, and that doesn't bode well for your session career.
Throw on a capo because only five keys are generally acceptable for playing guitar in a session: G, D, E, C, and A. Is the song in Db? Put a capo on the 1st fret and play in C. How about F#? Place a capo on the 2nd fret and play in E. Even if a song is in A, 95 percent of the time the acoustic guitar player will opt to play with a capo on the 2nd fret so he or she can move around comfortably in the key of G. Ex. 3 shows some of the special open chords that session players use all the time.
Palm-Muting Verses
Wide-open chords aren't everything, though. Songs need to have structure and flow, and the band members need to be on the same page about where the song is going. If you watch a session with guitarists Derek Wells and Jerry McPherson both playing guitar, they aren't clashing. They both know how energetic the song needs to be at any given moment. Chances are you'll nail it if you play the verses a little lower in energy and the choruses a little higher in energy. You can palm-mute the lowest two strings of an open chord, or you can palm-mute a power chord, or you can palm-mute thirds that fit inside of the chord. Check out Ex. 4 for an example. Any of those routes will work to get you from the intro to the chorus. And when it comes time to do a "fill" at the end of the measure or progression, all you really need to do is unmute what you're already doing! Fish in a barrel.
My Kinda Drones
"Box" playing is great, but I'm sure you want to have more than just boxes in your toolkit. One of the best tricks for coming up with melodies that don't sound boxy is by using what I call "My Kinda Party" drone lines. The signature lick in Jason Aldean's song, "My Kinda Party," is a wonderful example of this. Come up with a melody and play the whole thing on the 2nd string. Don't get too complicated, and don't make it too fast. Make it a nursery rhyme, a simple, hummable jingle that a drunk Bonnaroo crowd could sing back to you.
To allow the 1st string to ring out as you move along the neck, you need to fret the notes on the 2nd string using the very end of your fingertips. Now pick through both the top two strings while sliding from note to note (Ex. 5). This adds thickness and texture to the melody and helps make it sound like music, so someone like super-producer Justin Niebank doesn't have to spend time adding effects to your guitar to fill out the mix. As with the open chords, make sure you have the capo in the right spot so the open 1st string fits the song's key.
Get Low
The opposite of that approach is using a technique found in Luke Bryan's tune, "We Rode in Trucks." With this trick, you place the root of the chord on one of the lower three strings and build your melody on the string above it (Ex. 6). My favorite application of this is when you hammer-on to a 3, which puts your hand right in the "All About Tonight" box we talked about earlier if you need to launch into a solo. This trick can only be done if one or more of the low open strings works with the song's key, so you'll have to do some quick mental math and capo accordingly.
Swell into It
This technique is one of the physically easiest to perform, but requires some mental energy to get right. Sometimes the song needs an ambient volume swell to hold things together over chord changes, and this requires choosing your notes carefully. Let's say the progression is EmāCāGāD, with two chords per measure. Look for the notes that both chords share in each measure. Em and C both share E and G notes; G and D both share D notes.
That's the safe route, but you can also swell into notes or pairs of notes that challenge the chord a little bit and make an extension out of it. Swelling into a D over the Em and C turns them into Em7 and Cadd9, respectively, both very cool sounds. And G to D is a pretty strong chord change in this key, so you'll probably want to stick the landing and end up on chord tones here. To change things up from just a D note you can swell in a pre-bent G note and let it down to an F# when the D chord comes in. Or do the same thing, but pre-bend a B note and let it fall to an A (Ex. 7). You can nail this approach if you know your chord tones. Note: You'll need a good amount of delay and reverb to make the most of your swells. Most players do this with a volume pedal, but with the right guitarāa Strat, for exampleāyou can also accomplish this manually.
High Extensions
Now that we're in the mindset of thinking about what our notes do to the chords we're playing over, adding higher extensions can introduce complexity and texture to a song. I have fond memories of sitting with a friend in high school, both of us holding acoustic guitars, and playing different triads and double-stops over each other's open chord strumsājust to hear how one person's triad could affect the other person's chord.
The idea is that you'd pick notes that might not be within the basic triad and use these additions to alter the song's principle chords. If a bass player plays a C, and the acoustic guitar plays an open C chord, and the other electric guitarist plays a C power chord, but you play a B and D double-stop high on the fretboard you just made the entire band sound like a Cmaj9 chord, which is really pretty sounding. If you pick G and Bb, then you made the band sound like a C7 chord, which is bluesy and sarcastic sounding. Session players know what note extensions to add to chords, what these extensions will sound like, and when it's appropriate to use them. Ex. 8 illustrates how to use this trick over a basic progression.
Simple Slidin'
On most sessions, slide is used for texture and not for Derek Trucks- or Sonny Landreth-inspired shredding, so it's mostly limited to chord tones and a couple of simple lines. It is a very cool color, though, and it's well worth learning how to navigate a melody with a slide on your pinky. Slide sounds more like a human vocal than fretted notes, so this technique can really lend itself to making memorable, catchy, singable hooks. This is part of the reason guitarist Rob McNelley is on so many recordsāhe's able to really make slide sing. Just be very careful about not letting strings ring unless you want them to. To come up with a simple, catchy, single-note slide line that soars over the arrangement, tap into the same melody-creating brain space you used for the "My Kinda Party" example, as well as the chord knowledge required for swells and extensions. Chord tones are always safe, extensions can be really cool, and make sure you stick the landing (Ex. 9).
Dot ā¦ Dot ā¦ Dot
You made it all the way to Ex. 10, so give your brain a break and let a pedal do all the work. Delay is a powerful effect, and when you sync that delay to the song tempo, the pedal can play notes for you. If you see guitarist Justin Ostrander doing something simple, chances are there's a timed delay happening to carry the simplicity. A dotted-eighth is equal to three 16th-notes, and a dotted-eighth delay means once you play a note, that note will come around again three 16th-notes later. And if the repeats are turned up, it'll keep repeating every three 16th-notes to create a cool syncopated feel (Ex. 10).
If you play something completely straight against the syncopated pattern the delay will be creating, the delay fills in the notes between what you're playing and makes an otherwise boring figure sound incredibly interesting. To make this trick work, you'll need a delay with programmable or tap tempo. For best results, tap the tempo for quarter-notes, play eighth-notes, and have the delay set for dotted-eighth-notes.
These guitarists stay mostly out of the spotlight, but with the growing world of media they are starting to get a little more exposure with great programs like Premier Guitar's Rig Rundown with Kenny Greenberg (shown below) or Zac Childs' Truetone Lounge episode with Derek Wells.
Videos like these let you inside the world of the pro session player, and are great resources for learning more from the best in the business. Next time you hear some tasty guitar on a radio hit, you'll know it's tasty for a reason and you're one step closer to being the guitarist who gets to play it.
- Everything You Need to Know About the Nashville Number System ... āŗ
- DIY: How to Convert a Flattop to Nashville Tuning - Premier Guitar āŗ
- Exploring Nashville Tuning - Premier Guitar āŗ
- Rig Rundown: Justin Johnson - Premier Guitar āŗ
- Nashville Session Guitarist for the Stars Kenny Greenberg & His New Album 'Blues For Arash' - Premier Guitar āŗ
- Derek Wells Rig Rundown - Premier Guitar āŗ
- How To Be a Work-at-Home Session Guitarist āŗ
- New Pixies Album 'The Night The Zombies Came' Announced - Premier Guitar āŗ
Selenium, an alternative to silicon and germanium, helps make an overdrive of great nuance and delectable boost and low-gain overdrive tones.
Clever application of alternative materials that results in a simple, make-everything-sound-better boost and low-gain overdrive.
Might not have enough overdrive for some tastes (although thatās kind of the idea).
$240 street
Cusack Project 34 Selenium Rectifier Pre/Drive Pedal
cusackmusic.com
The term āselenium rectifierā might be Greek to most guitarists, but if it rings a bell with any vintage-amp enthusiasts thatās likely because you pulled one of these green, sugar-cube-sized components out of your ampās tube-biasing network to replace it with a silicon diode.
Thatās a long-winded way of saying that, just like silicon or germanium diodesāaka ārectifiersāāthe lesser-seen selenium can also be used for gain stages in a preamp or drive pedal. Enter the new Project 34 Selenium Rectifier Pre/Drive from Michigan-based boutique maker Cusack, named after the elementās atomic number, of course.
An Ounce of Pre-Vention
As quirky as the Project 34 might seem, itās not the first time that company founder Jon Cusack indulged his long-standing interest in the element. In 2021, he tested the waters with a small 20-unit run of the Screamer Fuzz Selenium pedal and has now tamed the stuff further to tap levels of gain running from pre-boost to light overdrive. Having used up his supply of selenium rectifiers on the fuzz run, however, Cusack had to search far and wide to find more before the Project 34 could launch.
āToday they are usually relegated to just a few larger industrial and military applications,ā Cusack reports, ābut after over a year of searching we finally located what we needed to make another pedal. While they are a very expensive component, they certainly do have a sound of their own.ā
The control interface comprises gain, level, and a traditional bright-to-bassy tone knob, the range of which is increased exponentially by the 3-position contour switch: Up summons medium bass response, middle is flat response with no bass boost, and down is maximum bass boost. The soft-touch, non-latching footswitch taps a true-bypass on/off state, and power requires a standard center-negative 9V supply rated at for least 5 mA of current draw, but you can run the Project 34 on up to 18V DC.
Going Nuclear
Tested with a Telecaster and an ES-355 into a tweed Deluxe-style 1x12 combo and a 65 Amps London head and 2x12 cab, the Project 34 is a very natural-sounding low-gain overdrive with a dynamic response and just enough compression that it doesnāt flatten the touchy-feely pick attack. The key adjectives here are juicy, sweet, rich, and full. Itās never harsh or grating.
āThe gain knob is pretty subtle from 10 oāclock up, which actually helps keep the Project 34 in character.ā
Thereās plenty of output available via the level control, but the gain knob is pretty subtle from 10 oāclock up, which actually helps keep the Project 34 in character. Settings below there remain relatively cleanāamp-setting dependent, of courseāand from that point on up the overdrive ramps up very gradually, which, in amp-like fashion, is heard as a slight increase in saturation and compression. The pedal was especially fantastic with the Telecaster and the tweed-style combo, but also interacted really well with humbuckers into EL84s, which certainly canāt be said for all overdrives.
The Verdict
Although I almost hate to use the term, the Project 34 is a very organic gain stage that just makes everything sound better, and does so with a selenium-driven voice thatās an interesting twist on the standard preamp/drive. For all the variations on boost and low/medium-gain overdrive out there itās still a very welcome addition to the market, and definitely worth checking outāparticularly if youāre looking for subtler shades of overdrive.
Some of us love drum machines and synths, and others donāt, but we all love Billy.
Billy Gibbons is an undisputable guitar force whose feel, tone, and all-around vibe make him the highest level of hero. But thatās not to say he hasnāt made some odd choices in his career, like when ZZ Top re-recorded parts of their classic albums for CD release. And fans will argue which era of the bandās career is best. Some of us love drum machines and synths and others donāt, but we all love Billy.
This episode is sponsored by Magnatone
An '80s-era cult favorite is back.
Originally released in the 1980s, the Victory has long been a cult favorite among guitarists for its distinctive double cutaway design and excellent upper-fret access. These new models feature flexible electronics, enhanced body contours, improved weight and balance, and an Explorer headstock shape.
A Cult Classic Made Modern
The new Victory features refined body contours, improved weight and balance, and an updated headstock shape based on the popular Gibson Explorer.
Effortless Playing
With a fast-playing SlimTaper neck profile and ebony fretboard with a compound radius, the Victory delivers low action without fret buzz everywhere on the fretboard.
Flexible Electronics
The two 80s Tribute humbucker pickups are wired to push/pull master volume and tone controls for coil splitting and inner/outer coil selection when the coils are split.
For more information, please visit gibson.com.
Gibson Victory Figured Top Electric Guitar - Iguana Burst
Victory Figured Top Iguana BurstThe SDE-3 fuses the vintage digital character of the legendary Roland SDE-3000 rackmount delay into a pedalboard-friendly stompbox with a host of modern features.
Released in 1983, the Roland SDE-3000 rackmount delay was a staple for pro players of the era and remains revered for its rich analog/digital hybrid sound and distinctive modulation. BOSS reimagined this retro classic in 2023 with the acclaimed SDE-3000D and SDE-3000EVH, two wide-format pedals with stereo sound, advanced features, and expanded connectivity. The SDE-3 brings the authentic SDE-3000 vibe to a streamlined BOSS compact, enhanced with innovative creative tools for every musical style. The SDE-3 delivers evocative delay sounds that drip with warmth and musicality. The efficient panel provides the primary controls of its vintage benchmarkāincluding delay time, feedback, and independent rate and depth knobs for the modulationāplus additional knobs for expanded sonic potential.
A wide range of tones are available, from basic mono delays and ā80s-style mod/delay combos to moody textures for ambient, chill, and lo-fi music. Along with reproducing the SDE-3000's original mono sound, the SDE-3 includes a powerful Offset knob to create interesting tones with two simultaneous delays. With one simple control, the user can instantly add a second delay to the primary delay. This provides a wealth of mono and stereo colors not available with other delay pedals, including unique doubled sounds and timed dual delays with tap tempo control. The versatile SDE-3 provides output configurations to suit any stage or studio scenario.
Two stereo modes include discrete left/right delays and a panning option for ultra-wide sounds that move across the stereo field. Dry and effect-only signals can be sent to two amps for wet/dry setups, and the direct sound can be muted for studio mixing and parallel effect rigs. The SDE-3 offers numerous control options to enhance live and studio performances. Tap tempo mode is available with a press and hold of the pedal switch, while the TRS MIDI input can be used to sync the delay time with clock signals from DAWs, pedals, and drum machines. Optional external footswitches provide on-demand access to tap tempo and a hold function for on-the-fly looping. Alternately, an expression pedal can be used to control the Level, Feedback, and Time knobs for delay mix adjustment, wild pitch effects, and dramatic self-oscillation.
The new BOSS SDE-3 Dual Delay Pedal will be available for purchase at authorized U.S. BOSS retailers in October for $219.99. To learn more, visit www.boss.info.