
Using just a few notes or a barrage, John Frusciante creates guitar parts which deftly guide listeners through Red Hot Chili Peppers’ songs.
Intermediate
Beginner
- Explore the hallmarks of John Frusciante’s unique stylistic and technical approach to guitar.
- Get a humdinger of a funk strumming workout.
- Learn how to go deeper to create memorable guitar parts.
I had a bit of a strange introduction to the Red Hot Chili Peppers. Back in the day, during my first week of school at New York University, I noticed a sign on the door of the student cafeteria indicating that a relatively unknown band called “Red Hot Chili Peppers” was playing a show across the hall that Saturday night. I remember thinking, “Well, that’s a silly name for a band. Those guys are never going anywhere.” Yeah. Good call.
Cut to winter 2002: I’ve been a professional music transcriber for about five years, and I find myself in the Chili Peppers’ NYC management office, transcribing an advance copy of their By the Way album, set to be released that summer. It was the band’s eighth album and fourth with guitarist John Frusciante. It was also my first deep dive into Frusciante’s playing, though it would not be my last.
Guitars Gotta Groove
One of the Chili Peppers’ breakthrough hits was their cover of Stevie Wonder’s “Higher Ground” from 1989’s Mother’s Milk. This performance is a barnburner:
Frusciante’s aggressive strumming contributes mightily to the bedlam, combining bluesy double-stops and percussive muted strums. With Flea’s bass and Chad Smith’s drums, it’s a full-frontal punk/funk assault, and Ex. 1 is inspired by Frusciante’s playing on this classic. A key to staying in the groove is to keep your picking hand moving in a triplet rhythm, even if it’s not actually sounding any notes, as illustrated by the indicated strum pattern.
Another of Frusciante’s early records with RHCP, 1991’s Blood Sugar Sex Magik, has Frusciante fueling songs with his funk-inspired strumming style, melding punctuated funky single notes with, again, a lot of percussive, muted strums. Ex. 2 is reminiscent of Frusciante’s verse part in “Give It Away.” Note that even when just a single note is indicated, you should also include some surrounding muted strings, in order keep the percussiveness flowing. Focus on muting all six strings with your fretting-hand fingers and thumb, applying pressure only when an actual note is indicated. And keep that picking hand moving!
One of Frusciante’s earliest influences was Jimi Hendrix, and in “Suck My Kiss,” Frusciante fuses funk guitar with a rock-style riff that has shades of Hendrix’s “Fire.” Ex. 3 is based on this Chili Peppers’ classic and illustrates just how impactful the use of space can be. No extra muted strings here, just play as written.
Chordal Magic
Let’s give our picking hands a break and detour into Frusciante’s use of chord voicings. Among his many influences were guitarists in 1980s punk-rock bands. One such guitarist is John McGeoch from Siouxsie and the Banshees, and you can just imagine a young Frusciante being inspired by McGeoch’s playing in a song like “Spellbound.”
In a similar vein, Ex. 4 is based on Frusciante’s playing in songs like Blood Sugar Sex Magik’s “Under the Bridge.” Frusciante doesn’t merely arpeggiate chords. He goes deeper, and creates hummable melodies. In doing so, his guitar parts often act as additional hooks throughout the Chili Peppers’ songs.
Some of Frusciante’s most memorable, not to mention fun-to-play, guitar parts are a mashup of techniques. Take, for example, his intro to “Snow (Hey Oh)” from the 2006 album Stadium Arcadium. He deftly arpeggiates chords, though here, he stops to add melodic flourishes, and Ex. 5 is based on this same approach.
Let’s Make Some Noise
As I alluded to earlier, I would have yet another opportunity to get into the nitty-gritty of Frusciante’s playing. Just this past year, I transcribed much of the Chili Peppers’ two 2022 releases, Unlimited Love and Return of the Dream Canteen, marking Frusciante’s return to the band after departing in 2009. Let’s explore…
Sometimes all a song needs is noisy weirdness. In the choruses of “The Heavy Wing” from Unlimited Love, Frusciante unleashes the fuzz and, in between power chords, launches into sonic assaults of wild Eddie Van Halen-inspired slide/bend hybrids, along with some awesomely noisy bends. Ex. 6 illustrates this approach. In the final measure, bring the weirdness by catching both strings with your ring finger as you bend.
Summoning Moods with Lines and Chords
On a more melodic front, Frusciante will occasionally give a nod to the closed-triad shapes from Ex. 5 in his soloing. In Unlimited Love’s “Here Ever After,” he mainly climbs up an F triad, but keeps things interesting by using a quarter-note-triplet rhythm (Ex. 7).
In “Not the One,” from the same record, Frusciante finds his inner Allan Holdsworth, providing moody, volume-swelled chords and single notes (Ex. 8).
In a track from Unlimited Love, “Whatchu Thinkin’,” Frusciante simultaneously uses chords and lines to create a triadic rhythm part, the melodic line of which complements Anthony Kiedis’ vocal. Remember, to create a solid groove, keep your picking hand moving in a steady 16th-note rhythm, even when not striking any notes (Ex. 9).
Technique as a Means to an End
While he generally eschews shredding, Frusciante grew up a fan of guitarists such as Steve Vai and Randy Rhoads, and honed his technical abilities by, among other things, playing challenging Frank Zappa tunes. In “Eddie,” their tribute to Eddie Van Halen from Return of the Dream Canteen, Frusciante lets loose, especially live, and Ex. 10 is based on the fiery EVH-inspired licks he unleashes to honor the passing of the guitar legend.
Through the years, one of the hallmarks of Frusciante’s guitar style has been his boundless creativity. Whether he’s adding a percussive funky rhythm part, a subtle melodic line, or an onslaught of fiery mayhem, his guitar parts are a defining element of the Chili Peppers’ sound. If you take away only one thing from this lesson, I hope you’ll make it this: Frusciante’s view of technique as a means to an end, rather than an end itself, illustrates the power our attitude has in making good musical choices and uncovering our own unique creativity.
- Dot Hacker: Psychic Friends Network ›
- Meeting Your Heroes ›
- GALLERY: Hard Rock Collection’s Iconic Axes, Part 2 ›
- John Frusciante: War and Peace ›
- John Bohlinger’s Words of Wisdom - Premier Guitar ›
Here’s how 21 killer players from the past year of Rig Rundowns—including Justin Chancellor, Zakk Wylde, MonoNeon, Carmen Vandenberg, Sturgill Simpson, Jason Isbell, and Grace Bowers—use stomps to take their sounds outside the box.
TOOL'S JUSTIN CHANCELLOR
Justin Chancellor’s Pedalboard
If you ever catch yourself playing air guitar to Tool, you’re probably mimicking Justin Chancellor’s parts. “Schism,” “The Pot,” “Forty Six & 2,” “H.,” “Fear Inoculum,” “Descending,” “The Grudge,” and plenty of others feature his buoyant bass riffs.
What stomps does he run his Wal, StingRay, and Fender basses through? Glad you asked. His setup is either a bass player’s dream or nightmare, but for someone as adventurous as Chancellor, this is where the party starts.
You’ll notice many of his pedals are available at your favorite guitar store, including six Boss boxes, an Ernie Ball Volume Pedal, and MXR Micro Amp. Crucial foot-operated pedals are in blue: the Dunlop JCT95 Justin Chancellor Cry Baby Wah with a Tone Bender-style fuzz circuit (far left) and DigiTech Bass Whammy (middle). He really likes using the Tech 21 SansAmp GT2 for distortion and feedback when the Whammy is engaged or he’s playing up the neck. Covering delays are three pedals—he has the pink Providence DLY-4 Chrono Delay programmed to match drummer Danny Carey’s BPMs in “Pneuma,” which slightly increase during the song from 113 ms to 115 ms. The Boss DD-3s are set for different speeds with the one labeled “Faster” handling “The Grudge” and the other one doing more steady repeats. There’s a pair of vintage Guyatone pedals—the Guyatone VT-X Vintage Tremolo Pedal (Flip Series) and Guyatone BR2 Bottom Wah Rocker (a gift from guitarist Adam Jones). The Gamechanger Audio Plus pedal is used to freeze moments and allow Justin to grab onto feedback or play over something. The Boss GEB-7 Bass Equalizer and Pro Co Turbo RAT help reinforce his resounding, beefy backbone of bass tone, while the MXR Micro Amp helps goose his grimy rumbles. The Boss LS-2 Line Selector is a one-kick escape hatch out of the complicated signal chain for parts of “Schism.” The Wal and Music Man stay in check with the TU-3S tuner, a pair of Voodoo Lab Pedal Power 2 Pluses help bring things to life, and everything is wired up with EBS patch cables.
STURGILL SIMPSON AND LAUR JOAMETS
Sturgill Simpson’s Pedalboard
Alt-country veteran Sturgill Simpson packed light for his latest run. His board bears just a Peterson Stomp Classic tuner running into a Fulltone True-Path ABY-ST, which splits his signal to his two Magnatone Panoramic Stereo amps. “I wouldn’t use a tuner if I didn’t have to,” he chuckles. The LILY P4D beside the splitter lets him control his mic signal to cut interference from onstage noise.
Laur Joamets’ Pedalboard
For his main board, Laur Joamets packs a little heavier than his boss. The platform, made by West Coast Pedal Board, carries a Peterson StroboStomp, Greer Amps Arbuckle Trem, sRossFX fuzz/overdrive, MXR Booster, T-Rex Replica, sRossFX germanium octave pedal, TC Electronic Viscous Vibe, Dunlop EP103 Echoplex, and Source Audio True Spring Reverb. An MXR Tap lets him tap in delay tempos. He has a second pedalboard, as well, for his Stage One steel guitar. It goes into a Peterson StroboStomp HD, then on to a Greer Black Tiger and Goodrich Sound Company volume pedal, before hitting his Magnatone Varsity Reverb and a custom-built Fender brown-panel Deluxe clone he calls “the Charmer.”
PANTERA’S ZAKK WYLDE AND REX BROWN
Zakk Wylde’s Pedalboard
When Pantera’s bassist Rex Brown and singer Phil Anselmo decided to fire the band up again, the choice of fellow road dog Zakk Wylde on guitar seemed perfect. Here’s what Wylde had on the floor and in the racks for the band’s February date at Nashville’s Bridgestone Arena.
His signature arsenal of effects seen here includes a MXR Wylde Audio Overdrive, MXR Wylde Audio Phase, Wylde Audio Cry Baby wah, and a Dunlop ZW357 Zakk Wylde Signature Rotovibe. The lone box that isn’t branded Wylde is a standard fare MXR Carbon Copy. Offstage, his rack is home to a MXR Smart Gate and MXR Wylde Audio Chorus that’s always on. Both are powered by a Voodoo Lab Pedal Power 3 Plus. Another drawer holds a Radial BigShot I/O True-bypass Instrument Selector, Lehle Little Dual II Amp Switcher, and a Radial BigShot EFX Effects Loop Switcher.
Rex Brown’s Pedalboard
This tour was the first time Rex Brown used a switching system. His stage board sported a Dunlop JCT95 Justin Chancellor Cry Baby Wah, a 2000s Morley Pro Series II Bass Wah, Origin Effects DCX Bass Tone Shaper & Drive, a MXR M287 Sub Octave Bass Fuzz, and a Peterson StroboStomp HD. The brain of everything in the rack and onstage is the RJM Mastermind GT. And to help “move mountains,” Rex has a Moog Taurus III.
MSSV’S MIKE BAGGETTA AND MIKE WATT
Mike Baggetta’s Pedalboard
Mike Baggetta has some core pedals in MSSV, his indie supergroup with legendary bassist Mike Watt and drummer Stephen Hodges. His arsenal includes a Creepy Fingers Hold Tight fuzz, an Electro-Harmonix Ring Thing, a Wilson Effects Freaker Wah V2, an EHX Deluxe Memory Man, and a Red Panda Tensor. The signal flows from his Benson amp into the Tensor, which he uses for glitch sounds, harmonizing, and overdub mode, among other feats. His Memory Man adds space—the final frontier.
Mike Watt’s Pedalboard
Mike Watt puts his signature Reverend Wattplower bass into a Broughton Audio high-pass filter, an EarthQuaker Devices The Warden optical compressor, and a Sushi Box Effects Finally tube DI that functions as a preamp. There’s also a TC Electronic PolyTune.
MONONEON
MonoNeon’s Pedalboard
The Memphis-born avant-funk bassist keeps it simple on the road with a signature 5-string, a tried-and-true Ampeg stack, and just four stomps. Almost all of his stomps have been zhuzhed up in his eye-popping palette. He’d used a pitch shifting DigiTech Whammy for a while, but after working with Paisley Park royalty, the pedal became a bigger part of his playing. “When I started playing with Prince, he put the Whammy on my pedalboard,” Thomas explains. “After he passed, I realized how special that moment was.” MonoNeon also uses a Fairfield Circuitry Randy’s Revenge, a Fart Pedal (in case the Fairfield ring mod isn’t weird enough, we guess), and a JAM Pedals Red Muck covers fuzz and dirt needs. A CIOKS SOL powers the whole affair.
GRACE BOWERS
Grace Bowers’ Pedalboard
Grace Bowers is one of the freshest new guitar stars to emerge in the past year. She has the essential fixin’s for her classic rock tones: a Dunlop Crybaby Wah, Grindstone Audio Solutions Night Shade Drive, EarthQuaker Devices Tone Job, MXR Phase 90, MXR Phase 95, and Boss DD-2. Bowers powers them with a Voodoo Labs Pedal Power ISO-5.
GREEN DAY’S JASON WHITE
Photo by Raph Pour-Hashemi
Jason White’s Pedalboard
Long-time touring member Jason White’s stable is dominated by his Gibson Les Pauls and ES-335s. A Shure wireless system sends his signal to a rack set-up with an ISP noise gate, just in case White’s P-90s are picking up a lot of noise. From there, it hits a Dunlop Cry Baby and DVP1XL, then a MIDI-controllable RJM Effect Gizmo, which handles White’s effects: an MXR Reverb and Poly Blue Octave, Strymon TimeLine and Mobius, API Select TranZformer GTR, and a Custom Audio Electronics 3+SE Guitar Preamp, which gets engaged for clean tones and small combo sounds. A Lehle Dual SGoS Switcher and Fishman Aura DI Preamp handle changes with the piezo-equipped guitars. A Strymon Zuma provides the juice.
BONES UK’S CARMEN VANDENBERG
Carmen Vandenberg’s Pedalboard
Carmen Vandenberg covers a lot of ground with her Bones UK guitar sounds, and she’s got a carefully curated collection of stomps to span the territory. Her guitar first hits an Ernie Ball Cry Baby before running through the rest of the pedals: a Boss TU-3, Fulltone OCD, Supro Drive, Pigtronix Octava, EHX Micro POG, Supro Chorus, Blackstar Dept. 10 Boost, EarthQuaker Devices Dispatch Master, MXR Carbon Copy Deluxe, Catalinbread Belle Epoch, and Boss NS-2. A Live Wire Solutions ABY manages the signals on their way to her signature Blackstar CV30s.
BLACK PUMAS’ ADRIAN QUESADA, BRENDAN BOND, AND ERIC BURTON
Adrian Quesada’s Pedalboards
Adrian Quesada loves tremolo and reverb, and uses a Strymon Flint for both. His other main stomp is the Electro-Harmonix Holy Grail that provides a healthy dose of spring reverb. Also along for the tour: a Line 6 Echo Park, a Catalinbread Echorec, a Boss GE-7 Equalizer, a Catalinbread Belle Epoch, and an EarthQuaker Devices. The Fulltone Clyde Wah Deluxe has stepped in for a different filter sweeper. There’s also a JAM Pedals Ripple two-stage phaser, and a TC Electronic PolyTune2 Noir keeps his guitars in check. That’s all on board one.
His second board includes a JHS 3 Series Delay, a JHS Crayon, and an Electro-Harmonix Nano POG. Utility boxes on here—Strymon Ojai, JHS Mini A/B, and TC Electronic PolyTune—handle switching, tuning, and power.Brendan Bond’s Pedalboard
Three pedals get the job done for Mr. Bond: an Acme Audio Motown D.I. WB-3 passive D.I., a JHS Colour Box, and a Boss TU-3 Chromatic Tuner.
Eric Burton’s Pedalboard
Frontman and guitarist Eric Burton is the band’s lone wireless member. To accommodate his onstage prowling, tech Bryan Wilkinson uses a Radial JDI passive direct box that takes in the XLR from the audio subsnake wireless rackmount and routes it into the first pedal: a Boss TU-3 Chromatic Tuner. From there, Burton only has a couple pedals—a DigiTech Mosaic to mimic a 12-string for “OCT 33” and a JHS Colour Box for any required heat. A Strymon Ojai turns everything on.
JASON ISBELL AND SADLER VADEN
Jason Isbell’s Pedalboards
Jason Isbell could open a huge gear shop just by clearing off his boards and racks. First off, he has a complex wet/dry/wet setup that is parsed out via a RJM Mastermind, with two Magnatone Twilight Stereo combos carrying the all-wet effects. There’s also a Radial JX44v2, which serves as the core signal manager. Above it, on the rack, is an Echo Fix Chorus Echo EF-X3R. Moving up the rack, one drawer includes an Ibanez DML10 Modulation Delay II, EarthQuaker Devices Tentacle, and a trio of stereo-field-only effects: a Boss MD-500, Strymon Volante, and Hologram Electronics Microcosm. Another level up, you’ll find a Chase Bliss Preamp Mk II, Chase Bliss Tonal Recall Delay, Chase Bliss Dark World Reverb, Chase Bliss Condor EQ/Filter, Chase Bliss Gravitas Tremolo, Chase Bliss CXM-1978 Reverb (stereo-field only), Keeley 30ms Automatic Double Tracker, gold Klon Centaur, Analog Man Sun Lion Fuzz/Treble Booster, Analog Man King of Tone with 4-jack mod, Keeley 4-knob CompROSSor, Pete Cornish OC-1 Optical Compressor, EHX Micro POG, Analog Man ARDX20 Delay, and a trio of Fishman Aura Spectrum DIs.
Sadler Vaden’s Pedalboard
Isbell’s 6-string sparring partner Sadler Vaden’s pedalboard chain starts with a Dunlop Clyde McCoy Wah, then a Lehle volume pedal, which feeds the Gig Rig. He uses a Line 6 M5 with a Dunlop expression pedal for a lot of modulation effects. Other pedals include a Crowther Prunes & Custard, Nordvang No.1, an Analog Man Dual Analog Delay, Comp, and King of Tone, a Strymon BlueSky, and a Greer Lightspeed. Every effect is isolated into the Gig Rig. The board has four outputs, two for each side of his 3rd Power British Dream, one for a Marshall plexi, and one that goes to an aux line and splits to a Vox Pacemaker. The auxiliary line is as a backup in case Sadler’s amps go down. It consists of a Strymon Iridium into a Seymour Duncan Power Stage that goes to FOH. And finally, his acoustic pedalboard sports a Shure wireless running into an ART Tube MP/C preamp into a L.R. Baggs Venue DI, with a Radial Engineering Bigshot selector.
MICHAEL LEMMO
Michael Lemmo’s Pedalboard
Rising star player Michael Lemmo relies on his stomps for tone sculpting, but he doesn’t need much to get the job done. His signal hits a Korg tuner, followed by an Xotic EP Booster, Bearfoot FX Honey Bee OD, Red Panda Context, Boss DD-7, and TC Electronic Ditto. They’re all juiced by a Truetone 1 Spot Pro CS7.
HELMET’S PAGE HAMILTON
Page Hamilton’s Pedalboard
Page Hamilton used to travel with a full Bradshaw rig with rack gear, but he’s reduced things to a pair of Eventide H9 units and a handful of Boss boxes—a PS-5 Super Shifter, a MT-2W Metal Zone Waza Craft, a TS-2 Turbo Distortion, a NS-2 Noise Suppressor, and a FB-2 Feedbacker/Booster. A couple of Peterson Stomp Classic tuners keep his ESP Horizons ready, and a Boss ES-5 Effects Switching System organizes all his sounds and settings.
BARONESS’ JOHN BAIZLEY, GINA GLEASON, AND NICK JOST
John Baizley’s Pedalboard
The Baroness frontman’s board is packed with staged dirt boxes and tasteful mod stomps, all held in check with a GigRig G2, Peterson StroboStomp, and Ernie Ball Volume Pedal. The crown drive jewels are a heavily modded EHX Big Muff and Crowther Double Hot Cake, but a Beetronics FX Overhive and Pro Co RAT add sizzle, too. A Boss DD-3, DM-2W, and TR-2, EarthQuaker Devices Dispatch Master and Tentacle, MXR Phase 90 and Dyna Comp, and EHX Deluxe Memory Man handle the rest, while a DigiTech Whammy lurks for its moment to blast off.
Gina Gleason’s Pedalboard
Gleason’s favorite drive these days is the EQD Zoar. Piling on top of that are a MXR Super Badass Distortion, MXR Timmy, modded EHX Big Muff, and a touchy Philly Fuzz Infidel prototype; an Xotic SP Compressor and UAFX 1176 Studio Compressor tighten things up when needed. Three time machines—the Strymon TimeLine, EQD Space Spiral, and Boss DD-3—handle delay, and a Walrus Slo dishes out reverb. The MXR EVH Phase 90 adds some color along with another DigiTech Whammy. The Ernie Ball Volume Pedal, Peterson StroboStomp, and GigRig G2 finish the line-up.
Nick Jost’s Pedalboard
The bassist’s board is powered by an MXR Iso-Brick, with an Ernie Ball Volume Pedal and Boss TU-3 pulling utility duties before an Xotic Bass BB Preamp, Boss ODB-3, DOD FX69B Grunge, MXR Stereo Chorus, and Tech 21 SansAmp Bass Driver DI.
WOLFMOTHER’S ANDREW STOCKDALE
Andrew Stockdale’s Pedalboard
When we walked into Nashville’s Eastside Bowl for this Rig Rundown with Wolfmother’s alpha canine, Andrew Stockdale, it sounded like he was playing his SG through a Marshall stack at head-ripping volume. Nope! Stockdale was blasting skulls apart with a Line 6 HX Stomp doing the heavy tonal lifting. The rest of his board’s layout is a Snark floor tuner, an EHX Micro Synth (a Wolfmother staple), an Xotic AC Booster, an EHX Micro POG, a Dunlop Cry Baby 535Q Multi-Wah, a Boss TR-2 tremolo, a CIOKS DC5 power supply, and Shure GLXDC+ wireless.
FEARLESS FLYERS' CORY WONG AND MARK LETTIERI
Cory Wong’s Pedalboard
Through a Shure GLXD16 wireless system, Cory Wong flows his guitar into his Neural DSP Quad Cortex, which runs a beta version of his Archetype: Cory Wong plugin, based off of a melding of a Dumble and a Fender Twin. The signal hits an onboard envelope filter and rarely used pitch shifter, then exits out the effects loop into a Wampler Cory Wong Compressor, Jackson Audio The Optimist, and a Hotone Wong Press. The signal goes back into the Quad Cortex, where there’s a preset phaser, stereo tape delay, and modulated reverb, plus a freeze effect. Two XLR outs run to front of house, while two run to Wong’s Mission Engineering Gemini 2 stereo cabinet.
Mark Lettieri’s Pedalboard
Mark Lettieri’s signal first hits a Keeley Monterey Custom Shop Edition, followed by an MXR Deep Phase, J. Rockett HRM, J. Rockett Melody OD (Lettieri’s signature), Pigtronix Octava, and a Dunlop DVP4, all powered by a Strymon Ojai. A TC Electronic TonePrint Plethora X5 pedalboard handles coordination and switching between the devices.
SLASH’S BLUES BALL BAND
Slash’s Pedalboard
“I haven’t had a pedalboard in front of my feet since the ’80s,” Slash told us. But with the Blues Ball tour, he kept it simple, stomping his own boxes. His chain includes a Peterson StroboStomp, Dunlop Cry Baby, MXR CAE Boost/Line Driver, Ibanez TS9 Tube Screamer, MXR EVH90, BBE Soul Vibe Rotary Simulator, Boss DD-3 Digital Delay, and MXR Uni-Vibe, with everything powered by a Voodoo Lab Pedal Power 2 Plus. All pedals are taped down with their settings dialed in. When his signal leaves the board, it hits a Whirlwind Selector A/B box, where it splits off between his amps and his Talk Box rig.
Tash Neal’s Pedalboard
Tash Neal keeps a modest pedalboard at his feet: a D’Addario Chromatic Pedal Tuner, Dunlop Cry Baby, XTS Custom Pedals Precision Multi-Drive, EHX Green Russian Big Muff, and a Fender Waylon Jennings Phaser, powered by a T-Rex Fuel Tank.
RANCID’S MATT FREEMAN
Matt Freeman’s Pedalboard
Bassist Matt Freeman’s signal goes wireless into one of his Avalon U5 Class A Active Instrument DI and Preamps, and then through a Way Huge Pork Loin Overdrive, set to give his Bassman a good push.
CHRISTONE “KINGFISH” INGRAM
Kingfish’s Pedalboard
Kingfish’s signal starts with a Shure Wireless BLX4, which hits a Boss TU-3w Chromatic Tuner. From there, the route is a Dunlop Cry Baby Mini Wah, a Marshall ShredMaster, and a Boss DD-3 Delay. The pedals live on a Pedaltrain Nano board and were assembled by Barry O’Neal at XAct Tone Solutions.
DIXIE DREGS’ STEVE MORSE
Steve Morse’s Pedalboard
Steve plays through a pair of 3-channel Engl Steve Morse signature 100-watt amps—one wet, one dry—but his pedal chain is relatively simple: a Keeley Compressor, two Ernie Ball volume pedals, two TC Flashbacks, a TC Electronic Polytune, and a foot controller for his Engls.
The shredder and son of legendary artist Frank Zappa gives a tour of his up-to-date gear, including a complex stereo switching system, four racks of pedals, and some of his father’s favorite guitars.
Dweezil Zappa was always going to end up being an incredible guitarist. His dad, Frank Zappa, is celebrated as one of the most talented and creative guitarists in history, and by age 12, Dweezil was recording music produced by Eddie Van Halen. (Little surprise that he’s covering Van Halen’s 1981 stunner “Push Comes to Shove” lately.) He’s been a bona fide guitar star ever since, releasing seven original solo records, six tribute records, two LPs with his brother Ahmet Zappa, and guesting on recordings across the music universe.
Ahead of his gig at Memphis’ Minglewood Hall on his 2024 Rox(postroph)y tour, which celebrated the 50th anniversary of Frank Zappa’s Apostrophe (') and Roxy & Elsewhere records, Dweezil gave PG’s John Bohlinger a boot-to-bonnet look at his current road setup. There’s a lot of ground to cover between his and his father’s catalogues, and Dweezil loves the challenge, which he meets with a mix of his own gear and some special vintage assists courtesy of his dad.
Brought to you by D’Addario.Shut Up ’n Play Yer Les Paul
This coveted Gibson Les Paul Custom, featured on the cover of Frank’s 1981 record Shut Up ’n Play Yer Guitar, came out on the road this tour. Dweezil says that around 1986, his dad swapped in Dan Armstrong-made ceramic pickups. At one point, Frank installed a second input to try to use the guitar as a synth controller, but it didn’t track well enough to continue the experiment.
Along with the standard controls, the guitar includes switches to turn on different parts of the onboard preamp, which boosts the signal and adds plenty of gain. A rotary knob controls a wired-in parametric EQ set up to emulate different settings along the sweep of a wah pedal. Dweezil didn’t get much of the lowdown from his father on the complex operations; it was more trial-and-error. “You just have to turn knobs until you find something that you like,” he says. He connects to his rig with ZZYZX SnapJack magnetic cable connectors.
Rockin' with Roxy
Also out on the Rox(postroph)y tour is Frank’s iconic Roxy & Elsewhere-era Gibson SG. Like the Les Paul, it’s got a preamp circuit to boost the signal, a sweepable EQ, and can achieve acoustic, piezo-adjacent sounds. The preamp configuration in this one is red-hot; it dishes out tons of gain.
Signature Shabat
For Strat-style tones, Dweezil calls on his signature Shabat Lynx DZ, which has been used to dial in his cover of “Push Comes to Shove.” Per Shabat, it has a “body-mounted HSS configuration with a push/pull phase shift on the middle pickup, simplified single-knob layout, custom-cut 3-ply parchment/gold pickguard, and … a Vega-Trem VT1 tremolo."
The Lynx DZ is constructed with an alder body and a quartersawn hard maple, medium-C-profile neck with a 25.5" scale length. It’s loaded with Lollar Special S and Lollar El Rayo pickups, and the middle Special S is wired for phase shift. The Lynx, as well as the SG and Les Paul, are strung with Optima Gold-Plated 2028 FZ Frank Zappa strings (.008–.046), and struck with D’Addario .50 mm celluloid picks. (Dweezil likes them for pick slides.)
On the Ground
Zappa keeps a significant board at his feet, which he controls with a Fractal FC-12 controller. He runs his sound in stereo, with different effects going to each side, so he keeps volume pedals for each side in front of him, plus a wah and expression pedal.
The row of pedals perched atop the pedalboard includes a TC Electronic Polytune 3 Noir, a Marshall-style prototype pedal, J. Rockett Audio Designs PXO, Union Tube and Transistor Lab, SoloDallas Orbiter, a Jext Telez White Pedal (to nab a specific tone for playing “Nanook Rubs It”), and a 29 Pedals FLWR.
In the Rack
On our 2013 Rig Rundown, Dweezil was using the Fractal Axe-Fx II, and this time around, he’s upgraded to the Axe-Fx III as the basis of his sound. Given the sonic territory covered in his shows, it simply became too unwieldy and expensive to tour an analog rig.
The brains of his show are held in a rack system. A couple of out-of-sight splitter boxes help with the complex stereo signal paths, as do a pair of Voodoo Lab HEX audio switchers. The Axe-Fx III lives on the top shelf, and just below it are an Eventide H90 and TC Electronic TC 2290 that go to both sides.
The next rack down runs only to the left side, and includes a BK Butler Tube Driver, DigiTech FreqOut, Red Panda Radius and Raster, Krozz Devices Airborn Analog Flanger, and a Paul Trombetta Design Tornita! fuzz.
The level below it runs to the right side, with a “Clown Vomit” fuzz, Chase Bliss Warped Vinyl, Korg FLG-1 Flanger, Chase Bliss Generation Loss, Goochfx Holy Cow, and another Red Panda Raster.
Wrapping up the rig is the bottom rack, which again runs to both sides. It carries most of Zappa’s exquisite dirt sounds, thanks to a Union Tube and Transistor Tsar Bomba, Chase Bliss Automatone Preamp MKII, Goochfx Dirty Hippie, Tru-Fi Two Face, Foxrox Electronics Paradox TZF2, and a Paul Trombetta Design Rotobone that … somewhat reasonably apes a trombone sound. Paul Trombetta, we salute you.
Kepma Guitars introduces the new Fenix Series of Grand Auditorium acoustic guitars, offering premium features at an entry-level price, plus their new travel-sized FC Mini Series.
Designed for both aspiring players and seasoned musicians, the Fenix Series offers premium features typically found in higher-priced instruments, all starting at just $249.99.
“The new Fenix models represent our commitment to making premium-quality guitars accessible to players at every level, without compromising on sound, playability, or innovation,” said Kepma USA president Tony Moscal. “With their torrefied solid tops, thinner neck profiles, and unparalleled playability, these guitars deliver exceptional sound and feel typically reserved for professional instruments—all at an entry-level price.”
The Kepma Fenix Series features a Grand Auditorium body style with a solid torrefied Sitka spruce top, delivering exceptional tonal resonance and stability. The proprietary Kepma Torrefication Process uses a precise combination of heat and humidity to remove moisture, oils, and sap from the wood, resulting in a stronger, more stable top that enhances string vibration and ensures consistent performance in any environment.
Back and sides are crafted from layered African mahogany, providing a warm, balanced sound. The neck, made of durable nato wood, is reinforced with a two-way adjustable truss rod and finished with a smooth satin coating for effortless playability.
The Fenix Series is packed with cutting-edge features to elevate the playing experience:
- New 4-Point Bolt-On Neck Joint: Ensures unparalleled stability that allows for easy adjustments and maintenance - a first at this price point.
- Ultra-Thin Water-Based Finish: Environmentally friendly and just 0.042mm thick, this finish protects the guitar while maximizing tonal projection and preserving the natural beauty of the wood.
- Beveled Binding for Comfort: High-quality ABS beveled binding enhances durability, prevents edge damage, and ensures a comfortable playing experience.
- C-Shaped Fast Neck: A player-friendly design that reduces hand fatigue, enhances playing fluidity, and supports all playing styles.
For players seeking even more versatility, the optional AcoustiFex K-10 Pro Pickup, Preamp & FX System transforms the Fenix into an all-in-one performance and practice powerhouse. This system includes built-in reverb, delay, and chorus effects, Bluetooth audio streaming, and a companion app for rhythm looping, metronome functions, and more. Whether you’re performing on stage or practicing at home, plugged into an amp or mixer, or simply playing unplugged, the AcoustiFex system delivers unmatched sound and convenience.
The Kepma Fenix™ Series offers four configurations to suit every player’s preferences:
- FGA1-130 (Natural Finish): Grand Auditorium, solid torrefied spruce top, layered mahogany back and sides. MAP: $249.99
- FGA1-130A (Natural Finish with AcoustiFex): Grand Auditorium, solid torrefied spruce top, layered mahogany back and sides, AcoustiFex K-10 Pro Pickup System. MAP: $299.99
- FGA1-130SB (Sunburst Finish): Grand Auditorium, solid torrefied spruce top, layered mahogany back and sides, sunburst finish. MAP: $249.99
- FGA1-130ASB (Sunburst Finish with AcoustiFex): Grand Auditorium, solid torrefied spruce top, layered mahogany back and sides, sunburst finish, AcoustiFex K-10 Pro Pickup System. MAP: $299.99
The new Fenix models are designed to inspire beginners and seasoned musicians alike, setting a new benchmark for performance and value in the industry.
Kepma Guitars is thrilled to announce the introduction of its versatile FC Mini Series, packed with cutting-edge technology that redefines expectations for travel-sized guitars.
The new FC Mini models include a variety of configurations to suit every player’s needs. The Spruce/Rosewood and Spruce/Mahogany options feature solid torrefied spruce tops paired with layered rosewood or mahogany back and sides, available in natural and sunburst finishes. The Mahogany/Mahogany model features a solid torrefied mahogany top with layered mahogany back and sides in a natural finish. Each guitar is offered in three versions: no pickup, with the AcoustiFex® K-10 Pro system, or equipped with the Elfin Sound System, and all come with a deluxe gig bag. Prices range from $399.99 to $549.99 MAP.
Big Sound in a Compact Package Traditionally, smaller guitars have been associated with compromised sound and tone. Kepma’s FC Mini Series shatters this notion by integrating advanced innovations and meticulous design to create a guitar that offers the full resonance and projection of a standard acoustic.
Premium Materials and Construction The torrefaction process removes moisture, oils, and sap from the wood, enhancing stability and delivering superior tonal richness. Back and sides crafted from high-quality mahogany or rosewood ensure durability and warmth in every note.
Technological Innovations
- Proprietary Bolt-On Neck Design: Kepma’s neck contour bolt-on neck joint ensures a perfect and stable connection between neck and body, offering ultimate playability and infinite adjustability.
- Rosewood Bracing: Solid rosewood bracing enhances top stability and reduces energy loss, resulting in superior articulation and sustain.
- Arched Back Design: A unique arched back improves resonance and eliminates the need for back bracing, allowing for harmonious vibrations and a fuller sound.
Enhanced Playability The FC Mini Series is engineered with the player in mind. The slightly thicker neck provides added stability, while the ergonomic C-shape design reduces fatigue during extended playing sessions. The sleek cutaway provides access to the higher notes on the fretboard for better playability. Lower string action, beveled binding, and redesigned precision sealed tuners further enhance comfort and ease of use.
Attention to Detail Kepma’s commitment to excellence is evident in every detail of the FC Mini Series:
- D'Addario XS Strings: Coated strings extend playing life and offer superior projection.
- Elegant Aesthetics: Features include a magnolia inlay on the fretboard, upgraded rosette, and a refined rosewood veneer headstock.
- Eco-Friendly Finish: A thin, water-based matte finish minimizes vibration damping for a clear, transparent sound.
Advanced Electronics for Modern Musicians
AcoustiFex K-10 Pro System Each new FC Mini Series model is available with the AcoustiFex K-10 Pro System, offering:
- Built-in reverb, delay, and chorus effects
- Bluetooth audio streaming for playing along with backing tracks
- An on-the-go USB interface for app connectivity, enabling looping, rhythm tracks, and practice tools like a metronome and tuner
- Whether you’re performing on stage or practicing at home, plugged into an amp or mixer, or simply playing unplugged, the AcoustiFex system delivers unmatched sound and convenience.
Elfin Sound System The FC Mini Series are also available with the new Elfin K-13 Sound System, developed collaboratively by Kepma and Double Acoustics. The system offers high sensitivity, accurate sound reproduction, strong output power, and low noise. The under-saddle piezo pickup delivers sweet treble and punchy bass, making it ideal for fingerstyle playing. Additionally, the preamp features a rechargeable battery system that can be conveniently charged using a standard USB-C phone charger cable. The Elfin K-13 Sound System was developed and voiced specifically for the Kepma ¾ size FC Mini Series guitars.
Complete Package Each FC Mini guitar comes with a padded deluxe gig bag and an accessory kit that includes a custom truss rod wrench, microfiber polishing cloth, bridge pins, picks, extra saddle, and string height gauge.
Purchase Options
Spruce/Rosewood, Natural Finish
- Solid Torrefied Spruce Top/Layered Rosewood Back & Sides
- No Pickup: Model FCM-SR, MAP: $449.99
- With AcoustiFex K-10 Pro: Model FCM-SRA, MAP: $549.99
- With Elfin Sound System: Model FCM-SRE, MAP: $549.99
Spruce/Rosewood, Sunburst Finish
- Solid Torrefied Spruce Top/Layered Rosewood Back & Sides, Sunburst Finish
- No Pickup: Model FCM-SR-SB, MAP: $449.99
- AcoustiFex K-10 Pro: Model FCM-SRA-SB, MAP: $549.99
- Elfin Sound System: Model FCM-SRE-SB, MAP: $549.99
Spruce/Mahogany, Natural Finish
- Solid Torrefied Spruce Top / Layered Mahogany Back & Sides, Natural Finish
- No Pickup: Model FCM-SM, MAP: $399.99
- With AcoustiFex K-10 Pro: Model FCM-SMA, MAP: $499.99
- With Elfin Sound System: Model FCM-SME, MAP: $499.99
Spruce/Mahogany, Sunburst Finish
- Solid Torrefied Spruce Top / Layered Mahogany Back & Sides, Sunburst Finish
- No Pickup: Model FCM-SM-SB, MAP: $399.99
- With AcoustiFex K-10 Pro: Model FCM-SMA-SB, MAP: $499.99
- With Elfin Sound System: Model FCM-SME-SB, MAP: $499.99
Mahogany/Mahogany, Natural Finish
- Solid Torrefied Mahogany Top / Layered Mahogany Back & Sides, Natural Finish
- No Pickup: Model FCM-MM, MAP: $399.99
- With AcoustiFex K-10 Pro: Model FCM-MMA, MAP: $499.99
- With Elfin Sound System: Model FCM-MME, MAP: $499.99
The new Kepma FC Mini Series combines portability, premium materials, and advanced technology to offer an unparalleled sound and playing experience. Whether you’re a traveling musician or a beginner seeking comfort and quality, the FC Mini Series is your perfect companion.
For more information, please visit kepmausa.com.
Shure introduces the Nexadyne line of dynamic instrument microphones.
Each Nexadyne super cardioid microphone boasts Shure’s patented Revonic Dual-Engine Transducer Technology. While typical instrument microphones use a single transducer, Nexadyne microphones feature two precisely calibrated transducers working together to achieve optimal performance that delivers natural, authentic clarity while minimizing unwanted noise.
Nexadyne’s combination of acoustic signal processing and exceptional polar pattern linearity, enables the microphoneline to deliver a stronger and clearer output. This output is more authentic to the performer and reduces audio engineers’ need to apply typical EQ corrections.
Featuring compact industrial designs and a discreet, black finish for low-profile visibility, Nexadyne Instrument Microphones provide exceptional sound quality, industry-leading durability, and stage-friendly functionality. Each Nexadyne microphone surpasses real-world reliability requirements show after show and stands as the road-ready choice for modern touring.
Nexadyne 5 Dynamic Guitar Amp Microphone
Capture the full detail and power of your signature amplified guitar tone. The Nexadyne 5 ensures the full range of your guitar tone is captured and ready for the mix every time. The incredibly small dynamic cartridge design enables a side-address form factor for improved placement. It can be positioned by hanging off any amp or used with a standard mic clip and stand.
Nexadyne 2 Dynamic Bass Amp / Kick Drum Microphone
Kick drums will just sound bigger. The Nexadyne 2 delivers true, low-end clarity and fullness on every stage, with contoured EQ, protection from stage rumble, and improved high-frequency extension and attack definition. The microphone is designed with its swivel joint separated from the XLR output source for secure placement without strain on output cables.
Nexadyne Instrument Microphones carry these street prices: The Nexadyne 5 is available for $219. The Nexadyne 2 is available for $249.
Each microphone includes a zippered bag and brass adapter. The Nexadyne 5 includes the A25E mic clip.
For more information please visit shure.com.