In the fall of 1980, rock guitarists were still trying to wrap their heads—and fingers—around the wizardry of the still-ascendent Eddie Van Halen. By late 1983, many would begin to be mesmerized by the hellacious shredding of Yngwie Malmsteen. Both of these guitar greats were heavily influenced by classical music; EVH, who grew up playing classical piano, would only occasionally showcase what he’d learned in his playing (the classically tinged iconic tapping section of “Eruption” comes to mind). Malmsteen, on the other hand, would wear his classical influences on his sleeve, spearheading the rise of a new and more overt neoclassical guitar movement. Fittingly, right in between came the height of the brief but storied career of metal master Randy Rhoads.
While Rhoads was a serious classical guitarist whose arsenal held some devastating classically based rock licks, what was most striking about his playing was his unique way of weaving shades of classical music into his overall style, often yielding darker colors and textures.
Let’s begin by watching Rhoads tear through one of his classic solos while playing with former Black Sabbath frontman Ozzy Osbourne, who had just introduced him to the world.
Now, you might be asking, “Why not choose a video that shows Randy more clearly?” Sadly, not much exists. But we’ll keep searching as we explore some hallmarks of Rhoads’ peerless style.
Legato Twists and Turns
Rhoads’ originality and virtuosity were on full display in Osbourne’s band, where he would often weave legato scale patterns into his fills and solos. These were often three-notes-per-string patterns, characteristically dominated by fretting-hand hammer-ons and pull-offs.
If you normally play with your fretting-hand thumb over the neck, to effectively execute Ex. 1, you’ll need to adjust it so it’s more on top or behind. For the hammer-ons, be sure not to apply an overabundance of pressure, just enough to make the notes sound clearly. Pull off
in a slightly downward direction, but not so much that it creates a cat-like sound decried by legendary legato master Allan Holdsworth.
Rhoads subtly incorporated hints of his legato technique into his more bluesy playing, leading to sinewy licks like the one in Ex. 2.
Based on the F# natural minor scale (F#–G#–A–B–C#–D–E), Ex. 2 also includes the flatted fifth (C), borrowed from the F# blues scale (F#–A–B–C–C#–E). This note is also used to create more of an ominous sound, pioneered in metal by one of its founding guitar-fathers, Tony Iommi of Black Sabbath.
Relative to the root of a key, the flat fifth is found two and a half steps, or a tritone, higher (or lower). Like Iommi, Rhoads would often emphasize it in his songwriting. In the Middle Ages, the tritone was considered the “Devil’s interval” and was banned by the church. But that sort of thing suits metal music just fine. Ex. 3 illustrates one way to incorporate the flatted fifth into an F# minor-based riff, exploiting the interval’s trademark menacing sound.
Climbing Chromaticism
Rhoads would often shift phrases chromatically, going in and out of key, to dramatic effect:
Ex. 4 is based on a simple shape derived from the D minor pentatonic scale (D–F–G–A–C). Notice how you can fiendishly move it up the neck without regard for key.
Of course, you can also descend chromatically, as Rhoads does in Ex. 5.
Now, I know what you’re thinking: “Sure, that sounds great during an unaccompanied solo, but does it work in a real song?” Yep.
The crucial detail to remember here is to always end back in key, as in Ex. 6, which is in F# minor and ends on the third step of the scale (A).
Lethal Open-String Licks
Rhoads’ incorporation of open strings was both unique and lethal, and he would often summon lightning-quick and über-memorable fills, as he did in “Crazy Train” from Osbourne’s 1980 debut solo album Blizzard of Ozz.
Then there’s this barnburner, based on the A minor scale (A–B-C-D-E-F-G), from Blizzard’s “I Don’t Know.”
To completely capture Rhoads’ vibe here, try adding a pick harmonic to each picked note. They don’t even need to be very clear, just enough to make the notes squawk a bit.
The Difference a Year Makes
Recorded in 1981, just a year after Blizzard, Osbourne’s second album, Diary of a Madman, demonstrates just how much Rhoads’ style had matured. One area in which he clearly pushed himself was how he composed unique and complex backing music for his solos, like the tapping section from “Flying High Again.” (Rhoads tuned down a half-step for this album, but the related musical examples are indicated in standard tuning.)
In the key of A major (A–B-C#-D-E-F#-G#), albeit tuned down a half-step, Rhoads plays two series of tapped arpeggios, descending in a series of major and minor thirds, outlining some unusual chord progressions, namely A–F–D–Bb, immediately followed by E–C–A–F. It’s noteworthy that these progressions appear nowhere else in the song. Ex. 9 experiments with similar tapped arpeggios to create another uncommon chord progression. Note that Rhoads tapped with the edge of his pick, allowing for the example’s unique and bouncy tapping pattern.
For Diary of a Madman, Rhoads would draw inspiration from some of his favorite classical guitar music. For example, his intro to the title track is based on Cuban composer and guitarist Leo Brouwer’s Etude VI, and features some lush and beautifully dissonant chords. Ex. 10 is also inspired by this piece.
Tragically, Rhoads would be killed in an airplane crash in March of 1982, well before his time. There are some early recordings available of his former band, Quiet Riot, of which he was a founding member. But his star shined brightest on both Osbourne studio albums recorded over just a two-year period. However brief his career would ultimately be, and despite the dearth of video, his outsized influence continues to be felt by guitarists some 40 years later.
- Builder Profile: Jackson Custom Shop ›
- GALLERY: Randy Rhoads' Original Jackson Concorde Vs ›
- The Guitars of Randy Rhoads ›
Selenium, an alternative to silicon and germanium, helps make an overdrive of great nuance and delectable boost and low-gain overdrive tones.
Clever application of alternative materials that results in a simple, make-everything-sound-better boost and low-gain overdrive.
Might not have enough overdrive for some tastes (although that’s kind of the idea).
$240 street
Cusack Project 34 Selenium Rectifier Pre/Drive Pedal
cusackmusic.com
The term “selenium rectifier” might be Greek to most guitarists, but if it rings a bell with any vintage-amp enthusiasts that’s likely because you pulled one of these green, sugar-cube-sized components out of your amp’s tube-biasing network to replace it with a silicon diode.
That’s a long-winded way of saying that, just like silicon or germanium diodes—aka “rectifiers”—the lesser-seen selenium can also be used for gain stages in a preamp or drive pedal. Enter the new Project 34 Selenium Rectifier Pre/Drive from Michigan-based boutique maker Cusack, named after the element’s atomic number, of course.
An Ounce of Pre-Vention
As quirky as the Project 34 might seem, it’s not the first time that company founder Jon Cusack indulged his long-standing interest in the element. In 2021, he tested the waters with a small 20-unit run of the Screamer Fuzz Selenium pedal and has now tamed the stuff further to tap levels of gain running from pre-boost to light overdrive. Having used up his supply of selenium rectifiers on the fuzz run, however, Cusack had to search far and wide to find more before the Project 34 could launch.
“Today they are usually relegated to just a few larger industrial and military applications,” Cusack reports, “but after over a year of searching we finally located what we needed to make another pedal. While they are a very expensive component, they certainly do have a sound of their own.”
The control interface comprises gain, level, and a traditional bright-to-bassy tone knob, the range of which is increased exponentially by the 3-position contour switch: Up summons medium bass response, middle is flat response with no bass boost, and down is maximum bass boost. The soft-touch, non-latching footswitch taps a true-bypass on/off state, and power requires a standard center-negative 9V supply rated at for least 5 mA of current draw, but you can run the Project 34 on up to 18V DC.
Going Nuclear
Tested with a Telecaster and an ES-355 into a tweed Deluxe-style 1x12 combo and a 65 Amps London head and 2x12 cab, the Project 34 is a very natural-sounding low-gain overdrive with a dynamic response and just enough compression that it doesn’t flatten the touchy-feely pick attack. The key adjectives here are juicy, sweet, rich, and full. It’s never harsh or grating.
“The gain knob is pretty subtle from 10 o’clock up, which actually helps keep the Project 34 in character.”
There’s plenty of output available via the level control, but the gain knob is pretty subtle from 10 o’clock up, which actually helps keep the Project 34 in character. Settings below there remain relatively clean—amp-setting dependent, of course—and from that point on up the overdrive ramps up very gradually, which, in amp-like fashion, is heard as a slight increase in saturation and compression. The pedal was especially fantastic with the Telecaster and the tweed-style combo, but also interacted really well with humbuckers into EL84s, which certainly can’t be said for all overdrives.
The Verdict
Although I almost hate to use the term, the Project 34 is a very organic gain stage that just makes everything sound better, and does so with a selenium-driven voice that’s an interesting twist on the standard preamp/drive. For all the variations on boost and low/medium-gain overdrive out there it’s still a very welcome addition to the market, and definitely worth checking out—particularly if you’re looking for subtler shades of overdrive.
Some of us love drum machines and synths, and others don’t, but we all love Billy.
Billy Gibbons is an undisputable guitar force whose feel, tone, and all-around vibe make him the highest level of hero. But that’s not to say he hasn’t made some odd choices in his career, like when ZZ Top re-recorded parts of their classic albums for CD release. And fans will argue which era of the band’s career is best. Some of us love drum machines and synths and others don’t, but we all love Billy.
This episode is sponsored by Magnatone
An '80s-era cult favorite is back.
Originally released in the 1980s, the Victory has long been a cult favorite among guitarists for its distinctive double cutaway design and excellent upper-fret access. These new models feature flexible electronics, enhanced body contours, improved weight and balance, and an Explorer headstock shape.
A Cult Classic Made Modern
The new Victory features refined body contours, improved weight and balance, and an updated headstock shape based on the popular Gibson Explorer.
Effortless Playing
With a fast-playing SlimTaper neck profile and ebony fretboard with a compound radius, the Victory delivers low action without fret buzz everywhere on the fretboard.
Flexible Electronics
The two 80s Tribute humbucker pickups are wired to push/pull master volume and tone controls for coil splitting and inner/outer coil selection when the coils are split.
For more information, please visit gibson.com.
Gibson Victory Figured Top Electric Guitar - Iguana Burst
Victory Figured Top Iguana BurstThe SDE-3 fuses the vintage digital character of the legendary Roland SDE-3000 rackmount delay into a pedalboard-friendly stompbox with a host of modern features.
Released in 1983, the Roland SDE-3000 rackmount delay was a staple for pro players of the era and remains revered for its rich analog/digital hybrid sound and distinctive modulation. BOSS reimagined this retro classic in 2023 with the acclaimed SDE-3000D and SDE-3000EVH, two wide-format pedals with stereo sound, advanced features, and expanded connectivity. The SDE-3 brings the authentic SDE-3000 vibe to a streamlined BOSS compact, enhanced with innovative creative tools for every musical style. The SDE-3 delivers evocative delay sounds that drip with warmth and musicality. The efficient panel provides the primary controls of its vintage benchmark—including delay time, feedback, and independent rate and depth knobs for the modulation—plus additional knobs for expanded sonic potential.
A wide range of tones are available, from basic mono delays and ’80s-style mod/delay combos to moody textures for ambient, chill, and lo-fi music. Along with reproducing the SDE-3000's original mono sound, the SDE-3 includes a powerful Offset knob to create interesting tones with two simultaneous delays. With one simple control, the user can instantly add a second delay to the primary delay. This provides a wealth of mono and stereo colors not available with other delay pedals, including unique doubled sounds and timed dual delays with tap tempo control. The versatile SDE-3 provides output configurations to suit any stage or studio scenario.
Two stereo modes include discrete left/right delays and a panning option for ultra-wide sounds that move across the stereo field. Dry and effect-only signals can be sent to two amps for wet/dry setups, and the direct sound can be muted for studio mixing and parallel effect rigs. The SDE-3 offers numerous control options to enhance live and studio performances. Tap tempo mode is available with a press and hold of the pedal switch, while the TRS MIDI input can be used to sync the delay time with clock signals from DAWs, pedals, and drum machines. Optional external footswitches provide on-demand access to tap tempo and a hold function for on-the-fly looping. Alternately, an expression pedal can be used to control the Level, Feedback, and Time knobs for delay mix adjustment, wild pitch effects, and dramatic self-oscillation.
The new BOSS SDE-3 Dual Delay Pedal will be available for purchase at authorized U.S. BOSS retailers in October for $219.99. To learn more, visit www.boss.info.