The CBX Gated Reverb is designed to give you full control over a classic studio trick, popularized in the ‘80s by Phil Collins and Bruce Springsteen, known as gated reverb.
When it comes to studio tricks, many recording engineers had to invent their own effects. Double tracking and flanging started as manual manipulations of magnetic tape and the machinery used to process it. One such effect is gated reverb, the combination of digital reverb and noise gate, “invented” in the ‘70s but popularized in the ‘80s by one Phil Collins. Like many now-legendary effects, gated reverb was invented by accident using the Solid State Logic SL4000 Talkback Mic channel and AMS RMX16 digital reverb units. The premise is simple enough: the gate is a function of the signal strength; once the signal level drops below an adjustable threshold, the reverb tail snaps shut. Our CBX recreates this magical symbiosis with an overdrivable preamp, adjustable reverb lag time and a full wet-dry blend. The result is a lovely and expressive “always-on” reverb that stays in its lane and won’t interfere with the all-important mix.
Controls
Lag: This adjusts the delay between the original note played and the onset of the gate. You can use the lower half of the control to fine-tune your picking attack, and just past noon gives you slapback and reverse-esque sounds. Think of it as a pre-delay control for the gate.
Gate: Controls the sensitivity of the gate. Keep this low for the least amount of gating and longest reverb trails, turn up for running higher gain devices before or making the effect more subtle. When the Gate knob is all the way down, the gate is removed from the circuit. This can be manipulated with your guitar's volume control by lowering the signal level and forcing the gate to clamp shut.
Mix: Controls the balance between dry and wet signals. When set to its minimum, you will hear just the dry signal fed through the preamp. At maximum, the reverberated signal is the only thing present.
Verb: On a reverb pedal with no gate, this would control how long the reverb tail rings out. But since there’s a gate, this essentially governs the thickness of the reverb. Setting this knob low gives some mild reverberation and maxing it out gives a huge, harmonically rich reverb sound.
Pre: Controls the level of the onboard preamp.
The Spaces In-Beween The Space | Catalinbread CBX Gated Reverb
Catalinbread CBX Gated Reverb Pedal
For more information, please visit catalinbread.com.
Korg Pitchstrap Guitar and Bass Strap Tuner - Black
KORG Pitchstrap is the world’s first strap-mounted tuner and features a state-of-the-art technology that allows the tuner to detect the pitch of the guitar or bass from the strap’s vibrations.
Peterson StroboStomp Mini Pedal Tuner
The StroboStomp Mini delivers the unmatched 0.1 cent tuning accuracy of all authentic Peterson Strobe Tuners in a mini pedal tuner format.
Peterson StroboClip HDC High-definition Rechargeable Clip-on Strobe Tuner
The StroboClip HDC features a high-definition, color backlight display, rechargeable battery and over 65 Sweetened Tunings. With tuning accuracy of 0.1 cents, the StroboClip HDC is the ultimate clip-on tuner.
Cherub Pix Tune (WST-915Li)
The latest Cherub Pix Tune (WST-915Li) offers 16 vibrant display modes, allowing users to customize their tuning experience to match their own styles. There are 5 meter styles, 3 animal cartoon styles, 2 sports styles, and 6 user customizable styles. You can conveniently upload your boot-up animation and tuning display pictures through the accompanying APPs. With its engaging visuals, tuning has never been this enjoyable!
Taylor Beacon Digital Clip-on Tuner - Black
The Taylor Beacon combines a tuner, metronome, timer, and flashlight in one compact device, offering five tuning modes, 12 time signatures, and up to 100 minutes of practice timer.
This story’s author played this Belltone B-Classic 3 and found its neck instantly appealing, the tremolo capable of taking abuse and staying in tune, and the Filter’Tron pickups possessed of hi-fi clarity. Also, the sky burst metallic finish is pure eye candy.
That’s where guitar-by-menu comes in. Think of it as Build–A-Bear for guitar players, but louder and with cooler options, like a coral pink sparkle finish or a trapeze tailpiece. A coterie of manufacturers offers such services, some with online pull-down menus that cover everything from pickups to, well, all that goes into a guitar. And the advantage here is that no particular expertise other than knowing what you love to play and why you love to play it is required. You dig a Tele or a Jazzmaster or an SG or a Firebird from a certain era, but want a specific bridge or pickup combination, a ’50s or late-’60s neck, a finish not available in production models? No problem. Or maybe you crave something a tad more distinctive, with a non-traditional body shape, no headstock, and a finish that draws from the color palette of Van Gogh’s The Starry Night. All you gotta do is ask … or, rather, pick, click, order, or email, perhaps with a phone call to confirm the details.
We spoke to a clutch of large and smaller guitar companies—Belltone, Kiesel, Fender, and Gibson—to see how they do it.
The Belltone Way
“I was always the guy who had to tweak the guitar no matter what it was,” says Belltone founder Steve Harriman. “I changed out the pickups, I changed the pickguards, tuners, whatever.”
Like former Gibson CEO James Curleigh, Belltone Guitars founder Stephen King Harriman was an apparel executive with Perry Ellis before starting the Florida-based company in 2016. But the gig he’s had since junior high school is guitarist.
“I was always the guy who had to tweak the guitar no matter what it was,” Harriman says. “I changed out the pickups, I changed the pickguards, tuners, whatever. I always had to make what I was playing, whether it was a Les Paul or a Tele, unique, so it would be personally mine.”
Initially, Belltone offered modded versions of Les Paul- and Telecaster-style guitars, but in 2019 he reframed his business, designing an ergonomically contoured pear-shaped body and distinctive 6-on-a-side headstock as a foundation, and establishing a group of craftspeople to bring his solidbody B-Classic One, B-Classic Two, and B-Classic Three variations to life.
Today, Belltone guitars are made for players looking for a similar mix of the fresh and the familiar, at $2,680 to $3,129, depending on appointments. And the range of appointments is impressive. Let’s start with the templates. The Classic One has a flat top with edge binding, an alder body, a rounded tapered neck pocket, the company’s signature Devil’s Tail bridge and angled switch-control plate, reverse-dome tall-boy knobs, and a 12" compound-radius neck (held on by four bolts), with 22 medium-jumbo frets. In contrast, the Classic Two has all of the above, except there are arm and body contours with no binding, and the Classic Three offers the same plus Belltone’s patented Back-Lip Tremolo System and top hat controls.
“I’m inspired by a lot of ’50s and ’60 car designs for the elements of my guitars.”—Belltone’s Steve Harriman
Then, there’s a rabbit hole of options. There are 36 finish choices, with 10 ’bursts—including gorgeous black cherry burst, sky burst metallic, and lemon burst shades—requiring an upcharge of $40. There are varied pickguards to choose from within Belltone’s distinctive “Deco” version, which comes in black, white, and brown tortoise. There are four neck combinations (standard C and ’59 roundback profiles, with maple or rosewood fretboards), four tuner options (locking tuners from Belltone, Sperzel, and Kluson, plus ratio tuners), and a set of any-gauge Stringjoys. And the selection of pickups is truly impressive—36 in all, from TV Jones, Benson, Rio Grande, Mojo, Lindy Fralin, Porter, McNelly, Righteous Sound, Gabojo, and the newly added Brickhouse Tone Works. And within those selections are standard and hum-cancelling P-90s, stacked humbuckers, PAF humbuckers, regular and noiseless single-coils, multiple Filter’Tron variations, and more. Further, via Belltone’s Tone-Sure program, if a customer feels they’ve made the wrong call on pickups after playing their guitar a while, Belltone will swap them out at no charge save for covering shipping and the additional cost of pricier units.
“I’m inspired by a lot of ’50s and ’60 car designs for the elements of my guitars,” Harriman attests. “If you look at my bridge, for example, it’s got kind of a tailfin look to it. For me, guitars need to not only play well and sound great, but look cool. Also, everything is designed by me and is machine-tooled. My bridge is machine-tooled aluminum with rounded contours, as your palm can get roughed up on the old-style stamped ashtray bridges. I take all the things that make players happy into consideration.” Including sturdy and handsome faux-alligator-skin cases.
A deliberative buyer could spend weeks contemplating all of Belltone’s options before pushing the “submit” button, and then, instead of being invoiced, they are contacted directly by Harriman to review it all again before his luthiers get to work.
Gibson’s Made to Measure
One of Gibson’s Made to Measure fantasies: an SG with three humbuckers in a crimson sparkle finish.
The 131-year-old Gibson company’s Made to Measure (MTM) program is a bit more conservative … but only if you’d call a hot-crimson-sparkle SG with three humbuckers, a burgundy Les Paul Standard with a full-fretboard vine inlay, a champagne-pink-sparkle Les Paul, or a 3-pickup Firebird with a P-90 in the middle conservative.
There are two ways to initiate an order for an MTM guitar. You can fill out the online questionnaire on the Gibson Custom Shop’s Made to Measure page or stop by the Nashville or London locations of the Gibson Garage in person. I visited the Nashville Garage for this story, where I spoke with Dustin Wainscott, director of the Made to Measure program, and Matt Boyer, the sales associate you’d likely encounter if you walked into the Music City shop. They brought a clutch of recent MTM examples. And a wall of the MTM room was covered in slabs of wood, available for the choosing, and various bridges, tuners, pickups, and other parts for inspection and selection. Of course, some of the on-location fun is speaking with MTM program leaders like Boyer and Wainscott, who love guitars as much as you do and are happy to swap stories.
Whether by email, which will likely be followed up by a call from Boyer, or in person, the conversation that starts a MTM order begins with questions about body style, neck preference, electronics configuration, and the finish type and treatment.
“On the cosmetic side, we can go as far as you want to, with any color or finish you want.”—Gibson’s Dustin Wainscott
At the Gibson Garage Nashville, Dustin Wainscott, director of the Made to Measure program, and Matt Boyer, the sales associate in charge of MTM at that location, brandish a pair of custom-ordered instruments.
Photo by Ted Drozdowski
Essentially, any Gibson body currently in production and most historic appointments from that model’s history—and some from other compatible Gibson models—can be used for an MTM order. After selecting the white wood, as slabs are called in lutherie, “figuring out the pickup layout, the neck profile, and the tailpiece you want is the next step,” says Wainscott. “Then you get into the electronics and the look of the guitar: pickup selection, coil-splitting, what color or finish hardware, a glossy or flat finish, any Murphy Lab aging.
“Non-proprietary parts can sometimes be a roadblock. Typically, we’d use our pickups, for example, so if somebody makes a request for a pickup outside of Gibson’s, I try to steer them toward something we have that’s similar. You’ve got to play in the Gibson sandbox.” Stepping outside of historic model-design parameters, which would require re-engineering, is also a no-fly. That means don’t ask for a Les Paul with a Firebird neck, or an Explorer with a 3-on-a-side headstock. That said, there is a lot of wiggle room within the company’s catalog, and “on the cosmetic side, we can go as far as you want to, with any color or finish you want,” adds Wainscott. Personalized headstocks are also a popular option.
A Made to Measure order’s price starts with a $500 charge on top of a model’s current tag, and can increase depending on the complexity of wiring, finish, inlays, etc. Wainscott notes that about 30 percent of the Custom Shop’s business is Made to Measure.
“We also do a lot of recreating of models you’ve seen in the past that aren’t available now,” adds Boyer. “So, we can’t make a Jimmy Page Les Paul with his name on it, per se, but if you want a Les Paul Custom with three pickups, a Bigsby, a 6-position switch, and all that, we can do it for you.”
Kiesel’s Family Style
Kiesel can get as rad as you wanna be, including characterful flourishes like this naturally figured wood with pools of radiant blue finish and an organically striking neck.
Kiesel Guitars has essentially always been a custom-order builder, even if its name and line of business has evolved. The L.C. Kiesel Company was founded in 1946 by Lowell Kiesel as a manufacturer of pickups he sold from the back pages of magazines. As it grew, he renamed it after two of his sons, Carson and Gavin, as the well-known brand Carvin, which became famous as a maker of quality guitars, amps, and instrument parts. In 2015, the company split, Lowell’s son Mark and his son Jeff established the guitar-building operation under the Kiesel name. Today, thanks to their high-caliber construction and endorsees like Allan Holdsworth, Devin Townsend, Craig Chaquico, Jason Becker, and Johnny Hiland, the company makes more than 4,000 custom-order guitars a year.
“We have four types of construction: bolt-on, set-neck, set-through, and neck-through,” explains VP Jeff Kiesel. The company also offers the unusual choice of nine different headstocks, which most manufacturers limit to one style as part of branding, and sans-headstock models, which Kiesel began making in 2012 with the debut of its Allan Holdsworth model. All Kiesel headstocks have an 8 1/2-degree tilt, to create a steeper string angle over the nut, which can potentially improve tone and sustain.
At work on a body in the Kiesel factory, which produces about 4,000 custom-order guitars annually.
“We’re appealing to everybody because we do so many different things.”—Jeff Kiesel
“We never build the headstock separate from the neck and then scarf joint them in—it’s all one piece,” Kiesel adds. Necks are also quarter-sawn, with a two-way truss rod, dual carbon-fiber reinforcement rods, stainless steel frets, and Lunimlay side dots.
After that, ordering a Kiesel is all about options. There are 56 models, including signatures, to choose from. Once you select a model on the company’s website, you’re taken to a page that includes a builder menu. Kiesel’s lowest-priced models, including the Delos, start at $1,649, while the top-priced, flagship K-Series model starts at $4,399.
The Aries, one of Kiesel’s most popular guitars, starts at a base of $1,699 with a bolt-on neck and has a menu that includes, under general options, right- or left-hand orientation; the choice of 6, 7, 8, or 9 strings; multiscale necks; and 25 1/2", 26 1/2", or 27" scale lengths. Under body options, you can select beveled or unbeveled edges, and eight different body and 16 different top woods. There are more than 80 finishes to choose from, and 14 variations on the Kiesel logo. The neck options are equally rich, with five fretboard radius selections plus choices for neck wood, three neck profiles, inlays, truss rod covers, and more. The electronic options boast four pickup configurations, five different Kiesel neck and bridge pickup models, and additional alternatives. It’s easy to get lost in the woods, but when you emerge, an image of your guitar with all its appointments, generated as you make your choices, is waiting for you.
“Our lead time is seven to 12 weeks,” Kiesel says, “and we offer a 10-day trial period unless somebody gets too wild on their options.” Anyone ordering a guitar is welcome to phone the company to talk over their order, and Kiesel highly recommends that first-time buyers call.
While Kiesel Guitars once had a reputation as a shredder-axe factory, Jeff Kiesel explains that’s changed over the past decade. “Our demographic is not set anymore,” he shares. “We’re appealing to everybody because we do so many different things. We can build a very classy jazz-style neck pickup on a semi-hollow guitar that you can play some amazing Frank Gambale licks on. And then we can turn around and build a guitar that will do some really technical modern metal, like Marc Okubo. We can build really wild or really classy, and that’s created so much growth within our company.”
Fender’s Mod Shop
Ted created this “dream Strat” with a silverburst finish, noiseless single-coils, and a 2-Point Deluxe Synchronized Tremolo Bridge using Fender’s Mod Shop online tool.
Like Gibson, Fender’s Mod Shop is about personalizing classic templates—in this case, the Strat, Tele, Jaguar, Jazzmaster, P and J basses, and Acoustasonic Telecasters and Jazzmasters. And while the program was birthed in 2014 as the American Design Experience, it evolved into the Mod Shop and has continued to improve, most recently with an update this April that made the online menu easier to use and added more options.
“We know that 80 percent of customers will be loyal to brands where they can personalize and customize,” says Shannon Stokes, Fender’s VP of eCommerce. “So the whole online user experience has been finessed. It’s much easier to navigate on both desktop and mobile. You move through it choosing the orientation of the guitar, the finish … everything through the pickguard, the hardware.”
Justin Norvell, Fender’s VP of product, observes, “This is a playground, and you’re able to just mess around and see what appeals to you. We allow people to save their configurations to PDFs, and they can share them and send them out,” akin to trading cards. “There’s an exponential number of people that might sit on their favorite design for a year before they actually place an order.” Some hardcore fans buy multiple variations of a favorite-style guitar over time, “because you can engrave the neck plate, collect multiple finishes, and other cool stuff. This is an area where selection runs wild for lefties, too,” he adds.
Fender’s Justin Norvell with his own dream machine: an American Professional Jazzmaster in mystic seafoam.
“This is an area where selection runs wild for lefties, too.”—Fender’s Justin Norvell
“What’s amazing to me,” says Shannon Stokes, Fender’s VP of eCommerce, “is the number of people ordering black, white, and sunburst. I would think the rarer colors would be the thing.”
The cost of a Mod Shop guitar is an upcharge of several hundred dollars, with certain customizations increasing the tab. I decided to jump in and outfit a Strat, with a base price of $2,085, to my taste. After selecting the right-hand player’s orientation, I chose an alder body with a silverburst finish from a palette of nearly 50 colors and wood offerings that also included chambered ash, mahogany, and roasted pine. For the neck, I went with solid rosewood with Fender’s deep-C profile. Eight maple variations were also available. That neck option automatically led me to a rosewood fretboard, and then I hunted through 16 pickup configurations before stopping at the Generation 4 Noiseless Stratocaster set. I opted for a 4-ply black pearl pickguard, and aged white plastic controls and pickup frames. Next, from three bridge choices I tapped a 2-Point Deluxe Synchronized Tremolo Bridge. Chrome Fender strap lock buttons would do the job, since I’ve had un-strap-locked guitars fall to the stage at gigs in years past. For strings, a set for .010s, and the only case option is deluxe molded plastic with a fuzzy interior. Total cost: $2,175, which is not bad for those modest-but-swell appointments. I also downloaded a PDF, so you can see what I designed. Unhappy with the purchase? It can be returned within 30 days for a refund or exchange, plus shipping.
There’s about a half-dozen builders in the Mod Shop, but workers from the normal production line can be called in when there is an uptick in commissions, Norvell explains.
“What’s amazing to me,” says Stokes, “is the number of people ordering black, white, and sunburst. I love the satin orange because it’s vibrant, different. I would think the rarer colors would be the thing.” But players often look for instruments that are evocative of classic guitars they’ve seen. And 6-string dreams do come in all shades.
Announced at the 2025 NAMM show, Cory Wong’s new collaboration with Ernie Ball Music Man scratched an itch—namely, the itch for a humbucker-loaded guitar that could appease Wong’s rock-and-R&B alter ego and serve as complement to his signature Fender Strat. Inspiration came from no further than a bandmate’s namesake instrument. Vulfpeck bassist Joe Dart has a line of signature model EBMM basses, one of which uses the classic StingRay bass body profile. So, when Wong went looking for something distinctive, he wondered if EBMM could create a 6-string guitar using the classic StingRay bass body and headstock profile.
Ernie Ball Music Man StingRay II ReviewErnie Ball Music Man StingRay II ReviewDouble the Fun
Wong is, by his own admission, a single-coil devotee. That’s where the core of his sound lives and it feels like home to him. However, Wong is as inspired by classic Earth, Wind & Fire tones and the pop-punk of the early ’90s as he is by Prince and the Minneapolis funk that he grew up with. The StingRay II is a guitar that can cover all those bases.
Ernie Ball has a history of designing fast-feeling, comfortable necks. And I can’t remember ever struggling to move around an EBMM fretboard. The roasted maple C-shaped neck here is slightly thicker in profile than I expected, but still very comfortable. (I must also mention that the back of the neck has a dazzling, almost holographic look to the grain that morphs in the light). By any measure, the StingRay II’s curves seemed designed for comfort and speed. Now, let’s talk about those pickups.Hot or Not?
A few years ago EBMM introduced a line of HT (heat-treated) pickups. The pickups are built with technology the company used to develop their Cobalt and M-Series strings. A fair amount of the process is shrouded in secrecy and must be taken on faith, but EBMM says treating elements of the pickup with heat increases clarity and dynamic response.
To find out for myself, I plugged the StingRay II into a Fender Vibroverb, Mesa/Boogie Mark VII, and a Neural DSP Quad Cortex (Wong’s preferred live rig). Right away, it was easy to hear the tight low end and warm highs. Often, I feel like the low end from neck humbuckers can feel too loose or lack definition. Neither was the case here. The HT pickup is beautifully balanced with a bounce that’s rich with ES-335 vibes. Clean tones are punchy and bright—especially with the Vibroverb—and dirty tones have more room for air. Individual notes were clear and articulate, too.
Any guitar associated with Wong needs a strong middle-position or combined pickup tone, and the StingRay II delivers. I never felt any significant signal loss in the blended signal from the two humbuckers, even if I could use a bit more midrange presence in the voicing. The midrange gap is nothing an EQ or Tube Screamer couldn’t fix, though. And not surprisingly, very Strat-like sounds were easy to achieve for having less midrange bump.
Knowing Wong’s love for ’90s alt-rock, I expected the bridge pickup to have real bite, and it does, demonstrating exceptional dynamic range and exceptional high-end response that never approached shrill. Nearly every type of distortion and overdrive I threw at it sounded great, but especially anything with a scooped-mid flavor and plenty of low end.
The Verdict
By any measure, the StingRay II is a top-notch, professional instrument. The fit and finish are immaculate and the feel of the neck makes me wonder if EBMM stashes some kind of secret sandpaper, because I don’t think I’ve ever felt a smoother, more playable neck. Kudos are also due to EBMM and Wong for finding an instrument that can move between ’70s George Benson tones and the hammering power chords of ’90s Blink-182. Admittedly, the nearly $3K price could give some players pause, but considering the overall quality of the instrument, it’s not out of line. Wong’s involvement and search for distinct sounds makes the StingRay II more than a tired redux of a classic model—an admirable accomplishment considering EBMM’s long and storied history.
Ernie Ball Music Man StingRay II Cory Wong Signature Electric Guitar - Charcoal Blue with Rosewood Fingerboard
