The compact, lyre-like body with its long, thin horns and slim headstock were a marked departure from Fenders and the big hollowbody basses that were popular during the 1960s. Not surprisingly, the Longhorn’s cool, punchy, concise tones made it popular among many pros. My first bass hero, Garry Tallent of the E Street Band, to name one, famously played one often during Springsteen’s Born to Run era in the mid 70’s. And no less than Jack Bruce and John Entwistle had turns with Longhorn basses in the mid ’60s.
Though the modern Danelectro company produces vintage-looking and sounding instruments that stick with those familiar, winning formulas, they aren’t afraid to tinker with well-established concepts either. The new Red Hot Longhorn bass isn’t exactly a radical departure from the original Longhorn, but Danelectro uses the shape as a Trojan horse of sorts for exploring a few new twists on the traditional Danelectro design and tone recipe.
"If a Longhorn bass was going to make the scene at the Rainbow Club on Sunset Boulevard, this would be it."
Lipstick Traces
If you’re used to the handsome copper-burst finish that’s synonymous with Longhorns, you’ll be knocked flat by the finish that gives the bass its name. Danelectro has dabbled with flashy finishes in the past, like the sparkle jobs from the ’90s and early 2000s, but this deeper, darker red along with the glossy black looks distinctly ’80s. If a Longhorn bass was going to make the scene at the Rainbow Club on Sunset Boulevard, this would be it. A cream-white binding highlights the contrast between the black and red, and in person, it looks pretty stunning. A single F-hole helps justify Dano’s claim that this is the first semi-hollow Longhorn, though technically, vintage Longhorns with their Masonite-on-pine-frame construction were semi-hollows without soundholes. Danelectro says that the F-hole configuration has a positive effect on the Red Hot’s sustain. That might also be helped by the updated lipstick pickups. Like those on the Longhorn baritone, these otherwise traditional-looking lipsticks are wound for hotter output.
Featherweight Flash
It would be fair to assume that a bass with a body this light would be top heavy. In fact, the Red Hot is well-balanced, and the weight—or lack thereof—astonishes at times. I can see how some of my friends that pull eight-hour shifts on Broadway in Nashville benefit greatly from its feather-like feel. On our review Red Hot, the action was pretty high. And as much as high action is conducive to replicating the feel of a vintage bass, most players will probably prefer less space between the strings and frets. In old-school Dano style, the Longhorn has a rosewood saddle for all four strings, so lowering the entire bridge was the only option for an action fix. Yet as primitive as that solution is, it worked like a charm. The aluminum nut slots (which is obviously much more challenging to alter without the help of a pro) also seemed a little high relative to the fretboard, but did not detract from playability much once I adjusted the bridge.
Bumpin’ and Burpin’
I was impressed with the “burp” and aggressiveness of the Red Hot with both pickups engaged and the tone all the way up. The bass comes from the factory equipped with roundwounds and the zing of those strings registers loud and clear in combined pickup and advanced tone settings. Even fret and hand noises sounded musical, inspiring and fun. That bark and presence isn’t lacking at other settings, though. The growl I heard from the bridge pickup was more toothsome than that from many solidbody basses, and I turned down the tone control frequently in order to tame the bite. Extra bass from an amplifier’s tone stack can be a great balancing factor if you like the basic sound of the bridge pickup alone. But the single pickup still leaves lots of room for nuance. The note volume along the whole length of the fretboard is surprisingly full and even, which compelled me to try out a walking jazz bassline. That’s not generally something I would try with a bridge pickup alone, but it sounded full and even here.
By itself, the neck pickup’s tone is thick and buttery. And it’s in this mode that you perceive the virtues of the semi-hollow construction most. There’s a woody essence in the lower midrange without the unpleasant byproduct of muddiness in the sub-low frequencies that often occurs in basses with the neck pickup located this far forward. When I played the neck pickup with a pick and muted with my palm, I heard the most pleasing, and in some respects, the biggest tones from the Red Hot.
The Verdict
The Red Hot Longhorn is an attractive bass that produces a greater variety of tones than its style suggests. The block at the neck/body joint and the relatively high string height at the nut might take time to get used to if a player’s experience with Dano basses is limited. But the playing experience and tones the Red Hot delivers are often quite unique. Combined with the eye-catching style, it’s a bass that can point a player in fresh creative directions.
“Will the next Tool album take more than 10,000 days?”
That was an ongoing (and agonizing) joke for Tool fans that awaited the band’s fifth album following the release of 2006’s 10,000 Days. (A cruel clairvoyance of a title.) For those counting, when Fear Inoculum was finally delivered on August 30, 2019, it was just 4,868 days from their previous album. All crummy jokes aside, the anticipation of the album was real for a reason: the music. And the rhythmic cog of their constant contorting of depth and darkness is bassist Justin Chancellor.
Sure, drummer Danny Carey is a living legend bashing everything his large frame can smash and crash. Adam Jones transforms his guitar into a Hans Zimmer production with varied textures, temperaments, and traits his tone expresses. During shows, singer and lyricist Maynard James Keenan prowls in the shadows adding to the band’s musical mysticism. This triumvirate core dished out the punishing EP Opiate in 1992, and their 1993 debut full-length Undertow was more complex and calculated in its rage. But in 1995, when Justin Chancellor replaced Paul D’Amour on bass, Tool immediately expanded their dimensionality. The original three continued to dazzle and dumbfound listeners, but the addition of Chancellor and his pocket-minded role unlocked a collective vocabulary previously unspoken. Simply put, if Tool was an octopus, Chancellor was the head. The others could be momentarily independent tentacles exploring the melodic murkiness of their respective reaches, but when they needed to propel forward, Chancellor was steering. His lines are the base for the band’s groove and attitude that became a focal point on subsequent releases with 1996’s Ænima, 2001’s Lateralus, 2006’s 10,000 Days, and eventually 2019’s Fear Inoculum. The former three went triple-platinum, while the latter three were No. 1 on the Billboard 200. (Ænima landed in the No. 2 spot.)
If you ever catch yourself playing air guitar to Tool, you’re probably mimicking Chancellor’s parts. “Schism,” “The Pot,” “Forty Six & 2,” “H.,” “Fear Inoculum,” “Descending,” “The Grudge,” and plenty of others feature his buoyant bass riffs.
Chancellor’s tone has had a longstanding relationship with Wal basses, Gallien-Krueger amps, and Mesa/Boogie cabs. The evolving part of his rig has been his pedalboard. At this juncture of the band’s run supporting Fear Inoculum, Chancellor’s board is larger than his guitar-playing counterparts. Yet everything has a place and purpose. Some of it is duplicity, some of it is to avoid any required knob-turning during the show, and as we find out in the Rundown, some of it is just for fun. Grab a seat and get comfortable as Chancellor and his tech Pete Lewis walk PG’s elated Chris Kies through his live setup.
Brought to you by D’Addario: https://ddar.io/wykyk-rr
and D’Addario XPND Pedalboard: https://www.daddario.com/XPNDRR
Like a Glove
While recording Ænima, Chancelor borrowed a friend’s Wal bass that was originally fretless, but his pal did the dirty work of embedding frets into it. “That original bass’ tone immediately fit in with the band and covered the right area of sound,” remembers Chancellor. He promptly ordered his own replica of that build, and this is the second edition of it. The above 4-string has been his main bass for the last 15 years. It has a mahogany core, bird’s-eye maple caps, a neck incorporating mahogany, maple and rosewood, and a rosewood fretboard. Some minor changes to improve comfort and playability include lighter hardware and Luminlay fret markers. Chancellor’s basses take a custom set of Ernie Ball Hybrid Slinky Bass strings that have the standard .045-.065-.85, but because they tune down to drop-D for most songs, he swaps in a .110 from the Power Slinky pack. And when they go to drop-C for their oldest material, he’ll put on a .135 string. He hammers on the strings with a custom Dunlop (1 mm) Tortex Tri pick. All his instrument cables come from Mogami.
Full-Circle StingRay
Chancellor recalls auditioning for Tool with an Ernie Ball StingRay, but it just didn’t work with the band’s sound at the time. Fast forward two decades and the StingRay has found a cozy place in the Tool setlist. The 2018 Music Man StingRay Special is used on “Descending” from Fear Inoculum. Anyone keen on details will notice the high-tech solution of duct tape and marker that allows Justin to incrementally notch up the volume during the song’s blossoming midsection.
Pretty Practice P
Justin scooped this beautiful 1963 Fender P bass from Norm’s Rare Guitars. He does have a small collection of old instruments, but they have to meet two requirements before he makes the buy: They have to sound amazing and they have to be players so he can “bang away on them” without remorse. He doesn’t play it onstage (the vintage P’s output doesn’t have enough horsepower for Tool), but he does bring it on tour because he finds it inspirational to play, so it’s often with him backstage, on the bus, or in the hotel room.
Welcome to the Thunderdome!
This configuration of Demeter preamps and Gallien-Krueger power amps has been the nucleus of power for Justin’s studio and stage sound for years. The Gallien-Krueger 2001RB heads each hit their own cabinet. The “clean” RB runs into a Mesa/Boogie RoadReady 8x10. The middle RB head in the rack is the “dirty” amp that goes into a prototype Mesa/Boogie 4x12 that is EQ’d gnarlier and takes all of Chancellor’s pedals. He feels the 10" speakers retain the integral low-end bass tone better than the 12s, while the larger speakers are better suited for offering his distorted or effected tones an overall warmth that can disappear in the 10s. (The bottom 2001RB is on deck in case either head fails.)
Above the G-Ks are the Demeter Bass Tube Preamplifiers that give FOH a pure sound to mix in as needed. (The second Demeter unit is a backup.)
And up to the Radial JD7 Injectors are amp switchers that also help remove noise, signal loss, or hum and buzz.
Mesa Mountains
Here are the two Mesa/Boogie cabs—the 8x10 on the left and the custom prototype 4x12 on the right.
Justin Chancellor's Pedalboard
This setup is either a bass player’s dream or nightmare, but for someone as adventurous as Chancellor, this is where the party starts. At a glance, you’ll notice many of his pedals are available at your favorite guitar store, including six Boss boxes, an Ernie Ball Volume Pedal, and MXR Micro Amp. Crucial foot-operated pedals are in blue with the Dunlop JCT95 Justin Chancellor Cry Baby Wah with a Tone Bender-style fuzz circuit (far left) and DigiTech Bass Whammy (middle). He really likes using the Tech 21 SansAmp GT2 for distortion and feedback when the Whammy is engaged or he’s playing up the neck. Covering delays are three pedals—he has the pink Providence DLY-4 Chrono Delay for “Pneuma” that is programmed to match Danny’s BPMs, which slightly increase during the song from 113 ms to 115 ms. The Boss DD-3s are set for different speeds with the one labeled “Faster” handling “The Grudge” and the other one doing more steady repeats. There’s a pair of vintage Guyatone pedals—the Guyatone VT-X Vintage Tremolo Pedal (Flip Series) and Guyatone BR2 Bottom Wah Rocker (a gift from Adam Jones). The Gamechanger Audio Plus pedal is used to freeze moments and allow Justin to grab onto feedback or play over something. The Boss GEB-7 Bass Equalizer and Pro Co Turbo Rat help reinforce his resounding, beefy backbone of bass tone. The MXR Micro Amp helps goose his grimy rumbles. The Boss LS-2 Line Selector is a one-kick escape hatch out of the complicated signal chain for parts of “Schism.” The Wal and Music Man stay in check with the TU-3S tuner, a pair of Voodoo Lab Pedal Power 2 Pluses help bring things to life, and everything is wired up with EBS patch cables.
Shop Justin Chancellor's Rig
Music Man StingRay Special HH
Dunlop JCT95 Justin Chancellor Cry Baby Wah
Gamechanger Audio Plus Pedal
Boss DD-3 Digital Delay
Boss BF-2 Flanger
Boss CE-5 Chorus Ensemble
Boss GEB-7 Bass Equalizer
ProCo Turbo Rat
Tech 21 SansAmp GT2
DigiTech Bass Whammy
MXR Micro Amp
Boss LS-2 Line Selector
Ernie Ball VP Junior 250K
Boss TU-3S Tuner
JHS Switchback A/B Effects Loop Switcher
Voodoo Lab Pedal Power 2 Plus
Radial JD7 Injector
This not-so-special-looking Mustang bass sold for $384,000. Introduced in 1966 at just $189.50 (about $1,600 today), that’s a big markup for the historic and collector’s value it accrued on tour with the Rolling Stones.
In our capitalistic world, there’s usually one thing that rules it all: money! The site ventured.com features statistics and lists relating to the value of just about anything, and that includes the most expensive basses ever—right next to the most expensive fish and banjos. So, is this list full of the most cutting-edge instruments with advanced technology, giving us a glimpse into the evolution of the bass guitar?
Well, the basses at the top of the list do not give us that impression. Instead, they’re rather old tech. In first place is a 1969 Fender Mustang played by Bill Wyman on the Rolling Stones’ 1969 and 1970 tour, which sold at auction for $384,000. Of course, the Mustang was originally designed to be a budget bass, featuring racing stripes to appeal to young students.
The second on the list is a $250,000 luxury bass made from “premium materials” by luthier Jens Ritter, featuring 24-karat gold inlays and hardware, plus knobs topped with diamonds. It might still be a good, well-playing bass, but that’s obviously not where the money went.
A Hofner 500/1 sporting Paul McCartney’s autograph is third on the list of the most expensive basses ever.
Photo courtesy of wikimedia.org
In third is another collectible piece: a Hofner 500/1 Violin bass signed by Paul McCartney, followed by James Jamerson’s 1961 Fender Precision. The list continues with either signature models, ornamental inlays, or sought-after, rare custom colors. The Rickenbacker 4005 “Lightshow” bass, featuring lights all over the body that change color based on the notes played, even makes an appearance.
This list is further proof that it’s the story of a bass—its origin, rarity, who owned it, or who signed it—that drives its value more than innovation. And, of course, it’s collectors and not players that spend that much cash. But what if all those efforts would have gone right into a musician’s practical or tonal needs?
Our basses have to be visually appealing, and it’s fun for them to have a cool story, but instruments aren’t just collectibles or fashion, and a little innovation here and there wouldn’t hurt—especially since so many manufacturers’ sites praise exactly that. Every other industry accepts R&D as a cost factor that customers must pay for. The music industry instead invests in either cost savings or ornamental luxury, keeping customers amused with an ever-recurring cycle of fashionable items. And besides tradition, fashion is often the real enemy of innovation.
Besides tradition, fashion is often the real enemy of innovation.
Remember those optical pickups from “A Closer Look at Optical Pickups” [May 2021]. An evolutionary product that requires an idea and costly efforts in R&D and, finally, patents? Or how about Just L. Pauls from Spain, who, almost a decade ago, thought he invented a 3D pickup and convinced his family to spend a small fortune on the patent? In the end, there was no money for a good website or even a demo musician and the project soon folded. What innovation will come along and actually succeed at capturing our imaginations and finding an audience?
On a personal note, this is the 120th Bass Bench column, which means it’s been running for exactly a decade now. It’s time for me to take a break and focus on my main business and get down my backlog that has skyrocketed in recent years.
It wasn’t only 120 deadlines to meet, but also some details I wasn’t super-interested in and never intended to learn about, but had to, knowing it was going to meet an expert audience. In the end, it has helped me to connect a lot of dots, both historically and technologically, which I’m extremely thankful for.
A huge thanks to all the great people at PG for allowing and helping me to do this, and to all who commented and read what I had to say. I feel honored I could do this, and, who knows, maybe—or hopefully—I’ll return at some point. Thank you!