Stymon’s new UltraViolet pedal recreates the sound and feel of the original Shin Ei Univibe units from the ‘60s, popularized by players like Jimi Hendrix, Robin Trower, David Gilmour and Doyle Bramhall II, but adds a number of different options that were never available on the original units for greater flexibility.
Housed in the same smaller chassis as Strymon’s recent Cloudburst and Brig releases, Ultraviolet also takes advantage of all of the features of the new platform, including full MIDI implementation and 300 presets, USB-C connectivity, stereo IO on TRS jacks, a rear-panel mono-stereo switch and a discrete JFET input preamp for unmatched touch-sensitivity and tone.
UltraViolet’s simple and responsive controls provide a wider range of sounds than traditional vibe pedals. In addition to the familiar Chorus (50% wet) and Vibrato (100% wet) settings, there is a new Blend setting (30% wet) for an inspiring variety of more subtle effects. A Bias switch gives you three distinct flavors of sweep shape and tone emphasis, allowing for tons of sonic variation.
At slow speeds, the intensity range has been expanded beyond that of traditional vibe circuits to push even further into warmly undulating sonic territory. UltraViolet gives you all the classic vibe tones—and more.
Strymon UltraViolet Vintage Vibe
UltraViolet features a new algorithm in which all the elements of the classic optical vibe circuit (and their interdependencies) have been meticulously recreated for a dynamic playing response. From the effects of bias, speed and LFO waveshape on the pulsing of the lamp, to the response of the light-dependent resistors that set the center frequencies of the staggered phasing filters, the entire system has been duplicated and carefully tuned to produce the very best sounds a vibe pedal can offer.
TRS stereo input and output in a dual mono configuration means you can place UltraViolet at any point in your pedal chain with no impact on your stereo image. Full MIDI implementation with 300 available preset locations ensures that UltraViolet is ready for your MIDI rig. In addition to TRS MIDI, there is a USB-C jack for controlling the pedal via MIDI from a computer or for performing firmware updates. For hands-free control without MIDI you can connect an expression pedal for control over any combination of knobs in any direction. (Expression pedal controls Speed by default.) Or attach an optional external switch for tap tempo or favorite recall. Finally, a high-impedance, ultra-low noise discrete Class A JFET stereo input preamp provides exceptional touch sensitivity, dynamics and feel—all in a rugged and elegantly compact form factor.
Strymon UltraViolet Vintage Vibe – Deep Dive with Sound Designer Pete Celi
Learn more about UltraViolet ► http://strymon.net/ultravioletIn this video, Strymon co-founder and senior DSP engineer Pete Celi takes you on an in-depth tou...“Good grief this thing is addicting to play!”, said Sean Halley, Strymon’s Head of Marketing. “It has all of the low frequency girth that the best pricey boutique big-box pedal versions have, but it can do so much more than the originals could and it’s small enough to fit on any board. It’s the very first digital vibe I’ve ever heard that sounds this big”.
Pete Celi, Strymon’s co-founder and DSP guru adds “After deeply studying a bunch of the best analog units we ended up giving UltraViolet three different Bias settings, so you can really fine-tune the response to fit the music you’re playing. Also, in addition to the traditional Chorus (50/50) and Vibrato (100% wet) modes, the new Blend mode gives you a 70/30 mix of dry and wet, for more subtle versions of the effect. It can totally do the hyper-authentic ‘60s thing, but it can do a bunch of other stuff that makes it much more versatile than the original units.”
UltraViolet is available now directly from Strymon and from dealers worldwide for $259 US.
Strymon Ultraviolet
Much more than a re-creation of the legendary Uni-Vibe effect, Strymon’s UltraViolet Vintage Vibe chorus and vibrato pedal elevates classic rock’s most psychedelic effect with a significantly enhanced control section and modernized features. This pedal starts with an extraordinarily precise digital replica of the original Uni-Vibe’s Chorus and Vibrato modes, then ups the ante with a more subtle Blend mode — a 70/30 split of your dry/wet signal, as opposed to the 50/50 split of Chorus mode. Speed, Intensity, and Volume significantly increase your ability to sculpt and shape Uni-Vibe tones to your liking. Meanwhile, Strymon’s addition of a 3-position Bias switch drastically alters the UltraViolet’s voice by modifying the center frequency of the effect’s sweep. You also get all the cutting-edge benefits inherent to Strymon’s compact pedal lineup, including full MIDI implementation, a premium discrete analog input preamp, 300 presets, USB-C, and mono/stereo operation. Compact, versatile, and beaming with vintage-accurate swirl — Strymon’s UltraViolet is a must-have pedal for any Uni-Vibe fanatic.
The effects guru puts two historic pedals—the TS808 and the Nobels ODR-1—inside a single box, with a fresh circuit design that allows for four variations on their revered voices.
At first glance, Keeley Electronics’ new Noble Screamer seems like a guitarist’s dream version of a Reese’s Peanut Butter Cup. This enticing morsel tastefully pairs two classic overdrive flavors, the timeless (and ubiquitous) Ibanez TS808 Tube Screamer and the best-kept-secret Nobels ODR-1.
The two circuits lurk side-by-side beneath the Noble Screamer’s sleek hood, ready for action. But there’s more: Keeley Electronics’ founder and designer Robert Keeley provides a nifty additional twist for creating your own sonic mashups. With the Noble Screamer pedal you can link the Tube Screamer-like overdrive section—a masterpiece of soft-clipping aural bliss—with the ODR-1’s thumping sonic flavors. Or conversely, you can deploy the ODR-1’s hard-clipping drive with the Tube Screamer’s famously midrange-forward tone circuit. Voila! Suddenly you have four pedals in one.
Beyond providing some pretty darn sweet guitar tones, the Noble Screamer also embodies a few bigger and more profound themes. It shows increased emphasis on made-in-the-USA manufacturing, a trend that extends far beyond music gear. It offers additional options for buffering and true bypass as standard equipment on a guitar pedal—highly useful even for guitarists who remain stubbornly technology averse. And it aims to reinvent a key product line from an iconic company. But let’s start at the beginning…
Nailing the Right Shade of Green
“Pairing the ODR and Tube Screamer isn’t just about the green color, but it sure helped,” laughs Robert Keeley. “There is a rhyme and reason why I chose those two pedals for the Noble Screamer. I had never done any mods or anything based on the ODR-1, but the idea for the pedal came from this: Wouldn’t it be fun to combine two green pedals? And what if I could allow you to hear what makes each pedal unique, and borrow from one to the other? I was able to choose between the Tube Screamer tone control or the ODR tone control, and do the same thing with their clipping sections. So, I built both circuits in there, so people could mix-and-match and hear what makes each pedal unique.”
Keeley Electronics Noble Screamer Overdrive and Boost - Tech Demo
Keeley knew he would face heavy scrutiny in tackling the ODR-inspired circuit. Introduced in 1992, the Nobels ODR-1 has attained near-mythic status in the Nashville scene, spurred by the advocacy of session veteran Tom Bukovac. Almost singlehandedly, Bukovac—fondly known as “Uncle Larry” to his online followers—helped popularize the original ODR-1 among his Nashville friends and collaborators. And over the years, many of Nashville’s heaviest hitters have made the pedal an essential part of their arsenal.
Tom Bukovac x Keeley Electronics - Noble Screamer vs Vintage ODR-1 vs Vintage TS808
“There’s a constituency in Nashville, Brentwood, and Franklin that really loves this pedal,” Keeley notes. “They’re all friends and they’re damn near family, and this pedal works so well with their music. So, one of our goals became winning over that Nashville crowd. We carefully compared this to some great examples of 808s and ODRs—using audio analyzers, too—and then we took it to Nashville and asked veteran players to compare it to the original units.”
The Noble Screamer passed the audition. After A/B’ing it with an original ODR-1, Nashville session and stage ace Guthrie Trapp acknowledged “we’re sitting here and can hardly tell the difference. And to not have to spend $1,500 or $2,000 on a pedal…,” he added, shaking his head. And even Bukovac himself says, “They sound pretty similar. The guitar tone sounds great.”
Guthrie Trapp x Keeley Electronics - Noble Screamer vs Vintage ODR-1 vs Vintage TS808
Adding a Few Twists
Plenty of players will be hooked by the authentic sound of the Noble Screamer’s two iconic overdrives. But for many guitarists, the real fun begins when you experiment with tone/overdrive mashups, combining a Tube Screamer with an ODR tone circuit, and vice versa. “The Noble Screamer’s ODR tone control is a spectrum control,” Keeley notes, “and it moves up the bass and the treble at the same time. The Tube Screamer is a simple low-pass filter that helps create the midrange hump. They make a fun combination and they allow you to get some unique sounds.”
L.A.-based guitarist Brett Papa lauds the approach: “It’s really interesting to see how it nails both of those classic tones. But for me, the hybrid is the coolest thing about that pedal, because it really is the best of both worlds. Some pedals are so temperamental circuit-wise, but it doesn’t really matter with this pedal, because wherever your amp is at, you can dial in a great sound.”
The stompbox also offers unusual flexibility in its switching and buffering capabilities. It utilizes the buffer that Keeley perfected with his earlier Halo pedal (designed with guitarist Andy Timmons). In the Noble Screamer, the player can easily select true-bypass or buffered bypass: Simply step on the on/off switch for two seconds and it’ll toggle between the two settings.
“This pedal’s switching also makes it unique,” says Keeley. “For years I had been carrying around the quote that Bill Finnegan put on his KTR pedal, which has a switch where you can choose true bypass or buffered. He printed ‘almost always better’ on the setting when you switch on the buffer. I think it’s really valuable to have noiseless switching like the old Boss and Ibanez pedals. True bypass is great in a few cases, but the inevitability of it making a clicking sound can be a problem, so that’s why we’re offering buffered bypass, too.”
Taking Control and Upping the Ante
Beyond its sonic characteristics, the Noble Screamer underscores important investments, production advancements and design choices from a company reshaping itself and preparing for its next chapter. The Noble Screamer is the first pedal to take advantage of Keeley’s new Oklahoma City factory and its expanded production capabilities. The most visible sign is the pedal’s newly designed heavy-duty aluminum case. The streamlined, rugged enclosure is built in-house following a large investment in specialized equipment. “Making my own folded aluminum enclosure is a brand new capability,” Keeley explains. “I wanted to stop buying aluminum enclosures from China and start making my own. That way I can control the process and get exactly the type of enclosures that I want. To take full advantage of the enclosures, we also increased our capacity for circuit board manufacturing, and that was another big investment. We got another printer, powder coating booth, and oven. I doubled everything in the whole shop and invested in the future. Other manufacturers who are like-minded can do more manufacturing in the U.S. It’s pretty cool to see so much manufacturing coming back to the States.”
Keeley Factory Drone Video
Keeley chose to design a pedal that combines battle-worthy toughness and understated elegance. The Noble Screamer enclosure boasts a slightly slanted top—an homage to old-school classic pedals—but with a modern look and premium knobs. “The knobs and the subtle graphics speak really loudly on that slanted enclosure,” he says. It’s built like a tank—albeit a rather stylish one.
Was it a difficult decision to go with a standard-sized pedal when mini pedals have seen increasing popularity? Keeley is adamant. “At a time when a lot of people are cutting back on spending, I’m going against the trend and choosing to put out our boldest, most innovative ideas and give people a reason to spend their money on them,” he declares. “I think I can control the costs. The Noble Screamer is the exact same size as comparable pedals. There’s a definite trend toward small pedalboards with pedals that can fulfill one sound. Mini pedals are great and I plan on keeping them as an entry point for our product line. I don’t see any reason why I can’t fold aluminum for my own mini pedals at some point. But in the meantime, when we’re releasing our next generation of pedals, I’m going to focus on this new platform. I want this new line to redefine our product line and what we’re capable of. We’ve had success with compressors and reverbs and delays. This new line is hopefully going to redefine our drives.”
The Noble Screamer heralds a new direction for Keeley Electronics, and guitarists can look forward to more exciting mashups in the future. After all, the Reese’s Peanut Butter Cup turned out to be an enduring classic. So, you can expect plenty more ear candy from Keeley in years ahead.
The E670FE is an all tube, 100 Watt amp with three tube buffered FX loops.
The new E670FE is an updated version of Engl’s E670 Special Edition. The Special Edition amp spent years in the studios of Edmund Engl – the founder of ENGL amps – and was played by many iconic professional guitarists, who all had their own unique thoughts and requests when it came to tone and performance. Over the years, Edmund Engl and senior designer Horst Langer tweaked the Special Edition multiple times, and now it is finally available – on ENGL’s 40th anniversary year – to the public as an amp in ENGL’s standard portfolio as the Founders Edition. The E670FE – supreme in a stunning black finish with chrome knobs and an in-your-face red-lit front panel illumination – has been tuned and revoiced, but still retains the crushing tones that made the previous Special Edition iconic.
The amp, which features five ECC83 preamp tubes and either four 6L6 or four EL34 power amp tubes, delivers a massive range of sounds across its five channels (Clean, Crunch, Lead I, Lead II, and Tubedriver) and nine voicings, from crystal-clear cleans to searing high-gain distortion and everything in between. The multiple sound-shaping options on board – ranging from powerful EQs and separate gain controls on each channel to Gain Boost, Hi Gain, Mid Shift, Contour, Bright, Mid Edge, Modern Classic, Mega Lo Punch, and Depth Boost switches, alongside a built-in Reverb – help make the Founders Edition one of the most versatile amplifiers on the market. Perhaps the special pick of the bunch is the Tubedriver channel, which bypasses most of the amp’s inner workings to offer the most pure circuit and all-tube tones imaginable. On top of that, the E670FE – which is handcrafted in Germany to the highest of quality standards using only the finest components and materials – packs a wide array of practical features for the demanding modern guitarist who accepts only the best.
The amp is MIDI programmable, so players can save their favorite settings in up to 128 presets with the use of an optional external MIDI controller. There is also a threshold-footswitchable noise gate, a Power Tube Monitor, three tube buffered FX Loops, a line output and multiple cabinet output options on board. Edmund Engl, the founder of ENGL Amplifiers, said: “We're thrilled to introduce the E670FE Special Edition Founders Edition. This amplifier is the culmination of our 40 years of experience in crafting high-quality amplifiers that deliver uncompromising tone and versatility, and it is sure to take any guitar player’s tone and performance to the next level!" The E670FE is available in September 2023. For more information, visit the official ENGL website.
Features
- Five Channels: Clean, Crunch, Lead I, Lead II, Tubedriver
- All Tube, 100 Watts
- Preamp tubes: 5 x ECC83 (12AX7)
- Power amp tubes: 4 x 6L6 or 4 x EL34
- Three Tube buffered FX Loops (Serial FX Loop, FX Loop I and FX Loop II are variable from serial to parallel)
- Noise Gate with footswitchable threshold
- Power Tube Monitor
- MIDI In / MIDI Thru / S.A.C Port / Dual footswitch Jack
- Sound shaping options: Gain Boost, Hi Gain, Mid Shift, Contour, Bright, Mid Edge, Modern Classic, Mega Lo Punch, Depth Boost
- Controls: Gain (separate for each channel), Bass, Middle, Treble (Clean, Crunch), Bass, Middle, Treble (Lead I, Lead II), Reverb, Volume (separate for each channel), Presence A, Presence B, Master A, Master B
- Controls (Rear): Noise Gate threshold level, FX Loop I Balance, FX Loop II Balance, Tube Driver EQ
- Outputs: 1 x 4 ohms, 2 x 8 ohms, 1 x 8 ohms, 2 x 16 ohms, 1 x 16 ohms
- Line output
- Handcrafted in Germany