Sure, guitarist Mike Baggetta and punk bass legend Mike Watt have cool gear. Watt’s got a signature Reverend Wattplower bass in root beer burst, and Baggetta wields his custom Koll Tornado and Benson amp rig like Gandalf’s staff—all in service of creating flamethrower tones in their wild, no-holds-barred performances.
The trio mssv is an underground supergroup. They’re not playing the local enormodome, but each musician has a storied career and the ability to leap musical conventions in a single bound, even while rocking like hell … or playing compositions with sections that ricochet from Coltrane to Martian terrain.
The group sprung from guitarist Mike Baggetta’s dream of an ideal, omnivorous band—one that could navigate any kind of musical or sonic path, much as Baggetta has done himself, whether playing with other artists or solo. His first choice of bassist was Mike Watt, a legendary indie music figure who has been releasing daring rock and improv albums for decades, starting with the highly influential ’80s and ’90s outfits the Minutemen and fIREHOSE. And while mssv’s debut album, 2019’s Wall of Flowers, was recorded with the foundational rock drummer Jim Keltner, Keltner’s disinterest in touring caused Baggetta to seek a replacement in Stephen Hodges, one of the few sticks players who can match Keltner’s intention and a brilliant artist in his own right, with decades supporting Tom Waits, Mavis Staple, and other legends.
On the road behind their latest recording, Human Reaction (one of my picks for best albums of 2023), mssv stopped at the Blue Room in Nashville’s Third Man Records complex in late October, where their wily creativity ignited the place. But at soundcheck, Baggetta and Watt explained to the PG team exactly why they dig their rigs.
Brought to you by D'Addario:
https://ddar.io/wykyk-rr
https://www.daddario.com/XPNDRR
King Koll
This custom guitar by Saul Koll—a variation on the Tornado model Koll first built for David Torn—is perfect for Baggetta’s whammy-heavy approach, which makes his playing sound more vocal. It’s one of three Kolls he owns. It’s got cylindrical Hipshot locking tuners, a 25 1/2" neck, a Strat-like bridge, master tone and master volume dials, a 3-way switch for its Curtis Novak single-coils, and a mute switch, too. Middle position is his favorite spot. His strings: D’Addario XT’s, .010 to .046.
Ring o' Fuzz
Here’s a Creepy Fingers Hold Tight fuzz (“I like how it kind of folds over on itself when you dig in on it,” Baggetta says.) and an EHX Ring Thing, which digitally creates the greatest hits sounds of ring modulation as well as weirder, fractured tones and pitch shifting. Baggetta sometimes stomps through all of the Ring Thing’s presets for solos, constantly changing tones and pitches as he rips.
Say Wah?
At Mike Watt’s request—and for playing the Stooges’ “1969”—Baggetta got a Wilson Effects Freaker Wah V2. The guitarist explains that he’s not a big wah fan, but this model has synth-filter-like qualities that are perfect for his sonic playground, creating overtones that some somewhat like Tuvan throat singing at times.
Detour, Amp Ahead!
From there, Baggetta takes the line out to the dirt channel of his amp, a Benson Vincent, made in Portland, Oregon, by Chris Benson. “I think of it as the world’s greatest Fuzz Face,” he says. It’s got 30 watts of output power and loads of character. The amp blends two Benson circuits: the 1-watt Vinny and the 30-watt Chimera. The power tubes in the Chimera are EL84s and the Vinny side is a single EL84, and there is a 6L6, but Baggetta says, “I don't know what that does.” The preamp tubes are 12AX7s.
Remember the Panda!
The final entries in Baggetta’s pedal line-up are an Electro-Harmonix Deluxe Memory Man and a Red Panda Tensor. The signal flows from the Benson into the Tensor, which he uses for glitch sounds, harmonizing, and overdub mode, among other feats. His Memory Man adds space—the final frontier.
Wattplower Power
For this tour, the legendary bassist is playing his new signature Wattplower Mark II bass, built by Reverend, in root beer sparkle. This 4-string for a king has one-and-a-half more pickups than the first, single-pickup version of the Wattplower, Watt explains. He went to short-scale basses in the ’90s, and his faithful Gibson EB-3 inspired the Wattplower’s neck. It’s got extra grind thanks to P-Blade bridge and Rio Grande Pitbull pickups. The neck is 3-piece korina, and the body is also korina, and it's got volume, tone, and 3-way controls, of course. It’s also got Hipshot Ultralight tuners, a 30" scale, and a rosewood fretboard. The bridge is also Hipshot, and Watt’s is a top-loader.
Wattplower II
Here’s a close-up look at the Wattplower Mark II’s headstock and tuners.
Wattplower ID
Here’s how you know you’re playing a genuine Reverend Wattplower!
Wattplower, the Sequel
And here’s a look at the bridge, which comes in optional through-loading and top-loading styles.
Amp-phigory
“These days,” Watt says, “class D is the way to go.” And so, he plays a Bergantino Forte rated at 800 watts, into a Bergantino with two 12" neodymium speakers and a horn.
Stomp to Romp
Broughton Audio makes the high-pass filter loaded atop Watt’s board, which also has a EarthQuaker Devices The Warden optical compressor and a Sushi Box Effects Finally tube DI that functions as a preamp. Simple, but deadly. Oh, and there’s also a TC Electronic Polytune!
Shop mssv's Rig
EarthQuaker Devices The Warden
TC Electronic PolyTune3
Electro-Harmonix Deluxe Memory Man
Red Panda Tensor
Electro-Harmonix Ring Thing
Reverend Mike Watt Signature Wattplower Mark 2
Benson Vincent
Bergantino HP 2
Bergantino NXT 212
- Reverend Mike Watt Wattplower Review ›
- Editors' Picks: The Best Albums of 2023 ›
- If Mike Baggetta’s Music Was a Superhero, It Would Be Mr. Fantastic ›
- Chasing Tom Waits: Your Quest for Creative Identity ›
Stompboxtober Day 29 is live! Enter today to win a pedal from StewMac—more chances to win tomorrow!
StewMac International House of Overdrive Pedal Kit, With Bare Enclosure
The IHOO is based on the Crowther Hot Cake, an overdrive that became available around 1976. It was one of the earliest hand-made boutique effects pedals available. The circuit was designed to be what is now referred to as a “transparent” overdrive. An effect that enhances the player's sound while keeping the original tone intact.
This circuit has undergone many changes since its inception, and we have further expanded on the design by returning to an earlier version most revered by players and removing the buffer, which resulted in a reworked circuit that is true bypass but still retains the charm of the design.
We also include the original LM741 IC chip found in the originals, as well as the TL071 that is found in later versions so you can experiment with which IC best suits your playing style.
Neil’s brother-in-law Billy’s Ovation, before Neil’s repairs.
Reader: Neil Crump
Hometown: Austin, Texas
Guitar: King of the Road
When his brother-in-law passed away, this reader made it his mission to repair his old damaged Ovation guitar as a gift to his niece.
My brother-in-law passed away in March. He was a talented keyboardist and, in his heyday, played in bands that toured internationally. As a musician, he naturally had a guitar—a 1974 Ovation—and a “friend” put an unauthorized abstract paint job on it. That guitar had an extremely hard life: Its top was broken and the frets were completely worn out. As an aspiring luthier, I took the guitar to repair it then pass it on to his daughter. This proved to be a challenging task as I had never done anything more complicated than a basic setup before and I had few luthier tools.
A heat gun and thin spatula knife worked fine to remove the top and the bridge. I did my best to glue the new top halves together—but that left a visible seam, so I put a herringbone center strip over it (to match the purfling I would install later). I had no radius board, so I just clamped the pre-radiused braces I bought and was quite pleased that the new top did have a radius! Once I felt the bridge was sanded perfectly, I glued it down. I then replaced the plastic nut and saddle with bone. A hot soldering iron got the old frets out without damaging the fingerboard. (That said, next time I will clean those slots out better before installing new frets!)
“This proved to be a challenging task as I had never done anything more complicated than a basic setup before and I had few luthier tools.”
I was happy with my progress until I started routing the purfling channel. I had no workbench, and the concave Ovation body made things a bit awkward. While basically “bear hugging” the body with one arm and holding the router with the other, I heard a faint “pop.” The edge of an X-brace had come loose. I was able to squirt glue into the void with a syringe, but the concave guitar body made a brace jack useless (without fabricating a complicated caul). I removed the phono jack and jammed a pencil into the brace, keeping pressure on it with a rubber band. It worked!
Neil gave the Ovation a new lease on life with his extensive repairs, the end result of which can be seen here.
I also learned the importance of channel depth with purfling—I did lots of scraping to get everything flush. I am pleased with the finished product and my niece is so happy! I also put a new label inside the guitar body, with a dedication to her father on it.
Overall, there are multiple wins on this project. I gave tribute to my brother-in-law, made his daughter happy, and learned enough to build a guitar from scratch.
Two horns? It must be a Bison!
Our columnist links a few memories together to lead us to another obscure guitar model—one he remembers from his childhood and came to acquire as an adult.
Do you have any “click and stick” movies that you love? Like when you are channel surfing and see a movie that you’ve watched a lot, and then just watch it again? Lately, for me, it’s been the 2015 movie The Revenant. It’s a truly brutal tale of survival set in 1820s frontier America. My gosh, that movie just draws me in every time. There’s one scene where the main character goes flying off a cliff while riding a horse! He just sort of falls/rolls through a pine tree and lands in the snow … and he still survives! It’s crazy!
It makes me think about an old childhood friend who lived up the street from me. Jerry and his parents lived in an old house on their grandparents’ large plot of land. On one part of the land there was an old orchard filled with all types of fruit trees and pines, and I remember how we would climb to the top of the pines and just roll ourselves down the side, Revenant style! If you fell the right way, the branches would kind of gently let you down to the next, but if you hit it wrong and got in between the branches, you’d be wrecked. It’s like we enjoyed getting hurt, and, of course, when you’re young, you can snap right back. Ah, the days when pain really didn’t hurt. Now I wake up with injuries, for real.
“The action was way high and the fret ends were sharp. It was basically a painful affair.”
So why am I talking about my click-and-stick movie and stupid childhood escapades? Well, let’s get back to memories of my old friend Jerry. First, the house he lived in was so old that it had real wooden siding, but it hadn’t been painted in forever so the exterior took on a worn, faded, haunted house vibe. Second, his carpet was so tattered that it was being held together with duct tape. Lastly, I remember his dad had a cool, old electric guitar in the living room. His dad would let me play it sometimes, and I remember that it actually hurt to play! The action was way high and the fret ends were sharp. It was basically a painful affair. Not falling-out-of-a-tree painful, but as bad as it comes with guitars. It had the label “Conrad,” and young Frank didn’t realize that he’d be looking for that guitar again one day. I mean, it did have four pickups and lots of knobs and switches!
Made at the old Japanese Matsumoko factory in the ’60s, this Conrad Bison 1233 has four pickups and a 27" scale.
Years later, I would discover that his was a Conrad Bison guitar. The model came in a few different configurations, but the four-pickup design was designated as the 1233. Primarily featuring a lovely sunburst, these Bisons were made at the amazing old Matsumoku factory in Japan and were imported by the David Wexler Company that was based in Chicago. Matsumoku always had a good supply of aged wood, and many of the guitars made there are resonant and built well. The Bisons first appeared around 1966 and had a rather good run into the early ’70s.
Simple volume/tone knobs are paired with preset solo/rhythm switches that power alnico magnets. There’s an on/off switch for each pickup, and the sound really covers all the bases. Thumpy lows and crisp highs are all there. And, the pickups handle fuzz and distortion with ease. The Bisons also came in one- and two-pickup configurations with a normal scale, but the four-pickup ones have a longer, 27" scale, which is common for Matsumoku-made electrics.
So there it is: pain, survival, American frontier, Bison, haunted houses. It all sticks together like a duct-taped carpet. Click and stick, baby!
A 1000-watt speaker cabinet crafted for musicians who demand power and precision. Sunn Amps intends to reinvent the standard 4x12 configuration with the introduction of this new cabinet.
The Sunn Amps DoomBox is built to accommodate both guitar and bass, offering an impressive 1000-watt handling capacity—making it the first commercially available 4x12 cabinet with such high power handling. With four specially designed 12” drivers rated at 250 watts each, this cabinet provides clean, unrestrained sound levels that can maintain power integrity across all frequencies, ideal for high-volume performances.
Inspired and developed using feedback from artists and bands who rely on the depth of lower tunings and high volume genres, the DoomBox was engineered to meet the unique demands of professional musicians looking for a robust, high-efficiency cab that can translate the raw power of their sound without compromise.
Premium Craftsmanship and Materials
The Doom Box cabinet is crafted from solid finger-jointed Baltic Birch plywood, ensuring both durability and tonal clarity. Each cabinet is constructed by hand in the U.S.A. using original 1930s machinery, the DoomBox reflects Sunn’s historic commitment to quality, contrasting with some of the mass-produced, MDF-based cabinets on the market today. The cabinet’s aluminum basket, ferrite magnet, and custom Sunn weave Tolex with a custom grill design complete its professional-grade build.
Technical Specifications:
• Power Handling: 1000W
• Inputs: 1 x ¼”
• Impedance: 8 Ohm
• Drivers: 4 x Sunn 12S250
• Construction: Marine Grade Baltic Birch
• Dimensions: 29.25” X 30” X 14”
• Weight: 107 lbs
• Price: $2399.00
With clear low-end punch, even sound response, and ample air movement, the Doom Box ensures that every note reaches the audience with clarity and power. This cabinet is a game-changer for musicians who need high-performance, road-ready equipment that enhances their unique sound.