Over the years, I’ve owned two classic SWR amps, the Bass 350 and the SM-400. Both provided high-fidelity, authoritative tones. So when I received the Headlite and Amplite heads, my first question was, would these new designs capture the trademark SWR sound?
The quick answer is yes. And more. Let’s look at some of the details.
Headlite: The Tiny Amp with Full-Sized Features
Nearly every major bass amp company has come up with a mini rig. SWR may be fashionably late to the party, but they’ve put this extra time to good use. Though it’s tiny, the Headlite remains true to both the SWR sound and feature set. I was amazed at how SWR managed to sneak a 3-band EQ (with adjustable frequency centers), a compressor, an enhanced Aural Enhancer, an effects blend, and an XLR direct out (with adjustable output level, pre/post selection, and ground lift) into an 8.5" x 9.75" package that weighs less than 4 pounds. The Headlite even sports a 12AX7 tube, just like its bigger siblings.
Download Example 1
Headlite - Aural Enhancer
As you might expect, shoehorning all these features into such a diminutive package necessitates a few trade-offs. For example, many of the controls use a knob-in-knob design. For example, a tone knob’s inner ring cuts or boosts a frequency band, which is set by the knob’s outer ring. Likewise, another knob has FX Blend on the outside, and Comp (compressor level) on the inside. Although a careful bassist would have no problem with the Headlite’s durability, I didn’t feel it would be as sturdy as a typical full-sized rig.
Upon first glance, the other question most bassists would have about the Headlite is whether there’s enough power in this tiny box. It all depends. The amp is rated at 400 watts RMS into 4 ohms. The manual doesn’t spec 8-ohm output, but typically that would be about 250 watts. Because the amp doesn’t go down to 2 ohms, you can plan on using one 4-ohm cab or two 8-ohm cabs to hit maximum power. Given the right cabs— which would need to provide sufficient cone area and greater than 100 dB efficiency—the Headlite should be able to keep up with most bands playing at moderate volumes.
Headlite Tones: Looks Little, Sounds Big
To test the Headlite, I plugged in my G&L L-2500, a 5-stringer with plenty of highs, lows, and punch. To match the Headlite’s tiny size, I hooked it up to my very efficient, 4-ohm Euphonic Audio Wizzy 12 cab. SWR has its own Golight cabs, including a 4x10, a 1x15, and a 2x10. These cabs are efficient (105 dB) and should mate well with the Headlite, but watch the impedance because some are 4 ohm while others spec at 8 ohm.
I set the Aural Enhancer to the “classic” 200 Hz center, dialed it to the 1 o’clock position, and left the three EQ knobs on their detented flat settings. (Thank goodness for those detents—the tiny black indicator dots on the knobs are all but invisible unless they’re right in your face.) Happily, this setting yielded the classic SWR sound with a solid punch to each note. Pushing the Enhancer’s shift button provided a warmer version of the same sound, with the scoop center moved up to 600Hz. Pressing the Enhancer’s knob defeats its function, providing a flat-EQ sound suitable for acoustic instruments. Engaging this button to remove the Enhancer’s deep bottom and crisp edge that worked so well for electric bass, I played an Azola BugBass electric upright through the Headlite and was rewarded with a full, warm sound. I should add that the Headlite’s compressor did a good job of leveling out the sound without totally squashing it.