![Dweezil Zappa Rig Rundown [2025]](https://www.premierguitar.com/media-library/youtube.jpg?id=56183232&width=1200&height=800&quality=85&coordinates=100%2C0%2C100%2C0)
The moe. frontline from left: Chuck Garvey (guitar), Rob Derhak (bass), Al Schnier (guitar), and Nate Wilson (keyboards). In the mist behind them is Jim Loughlin (percussion) and Vinnie Amico (drums).
The story of moe. is one of friendship, survival, resilience, and joy. Now poised to release their latest, Circle of Giants—chock full of rock ’n’ roll grooves both lilting and bone-shaking, and anthemic chord progressions—the group is as strong as ever. Chuck Garvey and Al Schnier’s vibrant, bright guitars chime, crush, strum, and wail, and there’s a buoyant spirit and evocative lyrics. The lead single, “Ups and Downs,” is a song bassist Rob Derhak wrote after a casual conversation with a mailman about the peaks and valleys of a long marriage. One of the album’s most moving tunes, the lyrics go:
She looks at him
He coughs into his overcoat
It smells like gin
From a different moment
Sail along, just another wounded soldier
Now carry on, carry on but older
The last bittersweet couplet might well apply to the band. They faced extraordinary challenges over the past six years that all but stopped them in their tracks.
Thirty-five years after forming at University of Buffalo, on Circle of Giants, moe. maintain their close-knit family vibe.
The first blow was Derhak’s battle with oropharyngeal cancer in 2017. With the group rallying around him and fundraising initiated by fans, he went through harrowing treatment, beat the odds, and the cancer went into remission.
Not long thereafter, Garvey had a stroke. He lost partial movement in his left side as well as the ability to speak. “My syllables didn’t know how to find each other,” he recalls. The guitarist had to relearn movement and speech. The band gathered, made music, and helped him heal. All marveled that, even with diminished facility, he still sounded like Chuckwhen he picked up his instrument.“I grew up listening to the Grateful Dead. They were kind of a model, but there were so many other things that I loved as well. Punk, prog, bluegrass…. There was never any question that we could put all of this into the band.” —Al Schnier
There were also personal losses, and then the pandemic came. Suddenly everyone was writing music in isolation, deprived of the companionship they had come to know so well. After regrouping post-pandemic, there was a tragedy at a New Year’s Eve concert in 2023, where several audience members were struck and killed by a vehicle outside the concert hall. Devastated, moe. responded by saying, “We believe in the power of music to heal and unite.”
Al Schnier's Gear
Al Schnier jams out on a Paul Languedoc G4.
Photo by Paul Citone
Guitars
Amps
- Two 1973 Mesa/Boogie Mark I amps loaded with Celestion Cream speakers
Effects
- Zvex Wah Probe
- Analog Man Envelope Filter
- Zvex Fuzz Factory
- Analog Man CompROSSor
- ARC Effects Klone
- Providence Chrono Delay
- Analog Man Bi-Chorus
- Kaden Effects FlutterTone tremolo
- Voodoo Labs Pedal Power 2 Plus
Strings and Picks
- D’Addario XL140 (.010–.052)
- Dunlop Primetone Semi Round 1.5mm
I asked Schnier how it felt to be making music with his partners after all they’ve been through. “The band brings me a sense of place,” he says, “a sense of identity and affirmation. The bonds between us are so deep. When we’re on the road, and we have a day off, we often all end up back in the bus around 8 o’clock just hanging out together. I don’t know if it’s that we’re creatures of comfort or that we just like each other’s company. It truly is a family.”
“The bonds between us are so deep.” —Al Schnier
The classic two-guitar frontline has defined the band’s sound from the beginning. Currently, Garvey plays a 1973 Telecaster Thinline that he outfitted with Lollar Wide Range humbuckers. His amp of choice is a Tony Bruno Underground 30. Schnier’s number one is a Custom Shop korina Gibson SG, which he plugs into two of the first Mesa/Boogies ever made (numbers 73 and 75).
The band’s guitar parts stem from the interplay between both players. Garvey and Schnier craft their lines by jamming, one riffing off the other—the sense of brotherhood extending to their composing habits. Someone will bring in a sketch and present it at rehearsal. The other members will help to shape the final product. No matter how finished a song might feel coming in, someone will always have an idea to make it better.
Chuck Garvey's Gear
Chuck Garvey’s 1973 Tele Thinline is loaded with Lollar Wide Range pickups.
Photo by Paul Citone
Guitars
- Jerry Jones 6-string Doublecut Dual Lipstick
- 1973 Fender Telecaster Thinline with Lollar Regal Wide Range pickups
- 1994 Fender Custom Shop Stratocaster with Seymour Duncan single-coils
- 1978 Ibanez PF200
Amps
- Tony Bruno Underground 30 head with 3x10" cab
- Magnatone M10
- Tony Bruno Tweedy Pie 18
Effects
- Analog Man Sun Face “BART”
- Analog Man Buffer
- Analog Man Bi-CompROSSor
- Analog Man King Of Tone
- Foxrox Octron
- Benson Germanium Boost
- Benson Germanium Preamp
- Klon Centaur
- Italian-made Thomas Organ Company Cry Baby
- Paul Cochrane Timmy V1
- Chase Bliss Warped Vinyl MkII
- Source Audio Nemesis Delay
- TC Electronic Tuner
- Fulltone Deja’Vibe 2
- Lee Jackson Mr. Springgy
- Chelli Amplification Spring Reverb and Harmonic Tremolo
- Vemuram Shanks ODS-1
- Lehle 1at3 Switcher
- Voodoo Labs Pedal Power
- True Tone 1 Spot Pro CS11
Strings and Picks
- Dunlop Primetone Semi Round Smooth Pick 1.4 mm
- Wegen Triangular TF140 White 1.4 mm
- D’Addario NYXL (.010–.046)
The sound of moe. is often described as “genre defying.” I ask what this rather generic phrase means to them. “I grew up listening to the Grateful Dead,” Schnier says. “They were kind of a model, but there were so many other things that I loved as well. Punk, prog, bluegrass…. There was never any question that we could put all of this into the band."
“You never know when you’re going through a crisis whether it’s going to turn out okay.” —Chuck Garvey
Garvey chimes in and talks about his admiration for Frank Zappa. “When we started out at Wetlands in New York City around 1990, it was a very open environment. One day they would program ska, the next some African band, the next a punk band. We were into it all.”
Over the many years, moe. has had many “ups”: innumerable headline tours, international festivals from Bonnaroo to Japan’s famed Fuji Rock, and sold-out shows alongside such like-minded acts as the Allman Brothers Band, Robert Plant, members of the Grateful Dead, the Who, and Gov’t Mule. Next, 2025 brings a long tour. In some ways they’re making up for lost time.
As for the “downs”? Says Garvey: “You never know when you’re going through a crisis whether it’s going to turn out okay. I think I can speak for everyone when I say that our whole family coming together has been helpful for everyone. It’s part of that smaller community—but also that huge community of fans who are right there with us when we go through these things.”
Schnier, with a noticeable degree of emotion in his voice, adds, “It’s all made us closer, stronger. It’s all because we have each other. I couldn’t do it without these guys. I’m so grateful for that.”
YouTube It
Hear how guitarists Schnier and Garvey intertwine their parts and their sounds, creating a distinct guitar vocabulary as moe. tackles the lead single from Circle of Giantslast August in Denver.
Designed for both aspiring players and seasoned musicians, the Fenix Series offers premium features typically found in higher-priced instruments, all starting at just $249.99.
“The new Fenix models represent our commitment to making premium-quality guitars accessible to players at every level, without compromising on sound, playability, or innovation,” said Kepma USA president Tony Moscal. “With their torrefied solid tops, thinner neck profiles, and unparalleled playability, these guitars deliver exceptional sound and feel typically reserved for professional instruments—all at an entry-level price.”
The Kepma Fenix Series features a Grand Auditorium body style with a solid torrefied Sitka spruce top, delivering exceptional tonal resonance and stability. The proprietary Kepma Torrefication Process uses a precise combination of heat and humidity to remove moisture, oils, and sap from the wood, resulting in a stronger, more stable top that enhances string vibration and ensures consistent performance in any environment.
Back and sides are crafted from layered African mahogany, providing a warm, balanced sound. The neck, made of durable nato wood, is reinforced with a two-way adjustable truss rod and finished with a smooth satin coating for effortless playability.
The Fenix Series is packed with cutting-edge features to elevate the playing experience:
- New 4-Point Bolt-On Neck Joint: Ensures unparalleled stability that allows for easy adjustments and maintenance - a first at this price point.
- Ultra-Thin Water-Based Finish: Environmentally friendly and just 0.042mm thick, this finish protects the guitar while maximizing tonal projection and preserving the natural beauty of the wood.
- Beveled Binding for Comfort: High-quality ABS beveled binding enhances durability, prevents edge damage, and ensures a comfortable playing experience.
- C-Shaped Fast Neck: A player-friendly design that reduces hand fatigue, enhances playing fluidity, and supports all playing styles.
For players seeking even more versatility, the optional AcoustiFex K-10 Pro Pickup, Preamp & FX System transforms the Fenix into an all-in-one performance and practice powerhouse. This system includes built-in reverb, delay, and chorus effects, Bluetooth audio streaming, and a companion app for rhythm looping, metronome functions, and more. Whether you’re performing on stage or practicing at home, plugged into an amp or mixer, or simply playing unplugged, the AcoustiFex system delivers unmatched sound and convenience.
The Kepma Fenix™ Series offers four configurations to suit every player’s preferences:
- FGA1-130 (Natural Finish): Grand Auditorium, solid torrefied spruce top, layered mahogany back and sides. MAP: $249.99
- FGA1-130A (Natural Finish with AcoustiFex): Grand Auditorium, solid torrefied spruce top, layered mahogany back and sides, AcoustiFex K-10 Pro Pickup System. MAP: $299.99
- FGA1-130SB (Sunburst Finish): Grand Auditorium, solid torrefied spruce top, layered mahogany back and sides, sunburst finish. MAP: $249.99
- FGA1-130ASB (Sunburst Finish with AcoustiFex): Grand Auditorium, solid torrefied spruce top, layered mahogany back and sides, sunburst finish, AcoustiFex K-10 Pro Pickup System. MAP: $299.99
The new Fenix models are designed to inspire beginners and seasoned musicians alike, setting a new benchmark for performance and value in the industry.
Kepma Guitars is thrilled to announce the introduction of its versatile FC Mini Series, packed with cutting-edge technology that redefines expectations for travel-sized guitars.
The new FC Mini models include a variety of configurations to suit every player’s needs. The Spruce/Rosewood and Spruce/Mahogany options feature solid torrefied spruce tops paired with layered rosewood or mahogany back and sides, available in natural and sunburst finishes. The Mahogany/Mahogany model features a solid torrefied mahogany top with layered mahogany back and sides in a natural finish. Each guitar is offered in three versions: no pickup, with the AcoustiFex® K-10 Pro system, or equipped with the Elfin Sound System, and all come with a deluxe gig bag. Prices range from $399.99 to $549.99 MAP.
Big Sound in a Compact Package Traditionally, smaller guitars have been associated with compromised sound and tone. Kepma’s FC Mini Series shatters this notion by integrating advanced innovations and meticulous design to create a guitar that offers the full resonance and projection of a standard acoustic.
Premium Materials and Construction The torrefaction process removes moisture, oils, and sap from the wood, enhancing stability and delivering superior tonal richness. Back and sides crafted from high-quality mahogany or rosewood ensure durability and warmth in every note.
Technological Innovations
- Proprietary Bolt-On Neck Design: Kepma’s neck contour bolt-on neck joint ensures a perfect and stable connection between neck and body, offering ultimate playability and infinite adjustability.
- Rosewood Bracing: Solid rosewood bracing enhances top stability and reduces energy loss, resulting in superior articulation and sustain.
- Arched Back Design: A unique arched back improves resonance and eliminates the need for back bracing, allowing for harmonious vibrations and a fuller sound.
Enhanced Playability The FC Mini Series is engineered with the player in mind. The slightly thicker neck provides added stability, while the ergonomic C-shape design reduces fatigue during extended playing sessions. The sleek cutaway provides access to the higher notes on the fretboard for better playability. Lower string action, beveled binding, and redesigned precision sealed tuners further enhance comfort and ease of use.
Attention to Detail Kepma’s commitment to excellence is evident in every detail of the FC Mini Series:
- D'Addario XS Strings: Coated strings extend playing life and offer superior projection.
- Elegant Aesthetics: Features include a magnolia inlay on the fretboard, upgraded rosette, and a refined rosewood veneer headstock.
- Eco-Friendly Finish: A thin, water-based matte finish minimizes vibration damping for a clear, transparent sound.
Advanced Electronics for Modern Musicians
AcoustiFex K-10 Pro System Each new FC Mini Series model is available with the AcoustiFex K-10 Pro System, offering:
- Built-in reverb, delay, and chorus effects
- Bluetooth audio streaming for playing along with backing tracks
- An on-the-go USB interface for app connectivity, enabling looping, rhythm tracks, and practice tools like a metronome and tuner
- Whether you’re performing on stage or practicing at home, plugged into an amp or mixer, or simply playing unplugged, the AcoustiFex system delivers unmatched sound and convenience.
Elfin Sound System The FC Mini Series are also available with the new Elfin K-13 Sound System, developed collaboratively by Kepma and Double Acoustics. The system offers high sensitivity, accurate sound reproduction, strong output power, and low noise. The under-saddle piezo pickup delivers sweet treble and punchy bass, making it ideal for fingerstyle playing. Additionally, the preamp features a rechargeable battery system that can be conveniently charged using a standard USB-C phone charger cable. The Elfin K-13 Sound System was developed and voiced specifically for the Kepma ¾ size FC Mini Series guitars.
Complete Package Each FC Mini guitar comes with a padded deluxe gig bag and an accessory kit that includes a custom truss rod wrench, microfiber polishing cloth, bridge pins, picks, extra saddle, and string height gauge.
Purchase Options
Spruce/Rosewood, Natural Finish
- Solid Torrefied Spruce Top/Layered Rosewood Back & Sides
- No Pickup: Model FCM-SR, MAP: $449.99
- With AcoustiFex K-10 Pro: Model FCM-SRA, MAP: $549.99
- With Elfin Sound System: Model FCM-SRE, MAP: $549.99
Spruce/Rosewood, Sunburst Finish
- Solid Torrefied Spruce Top/Layered Rosewood Back & Sides, Sunburst Finish
- No Pickup: Model FCM-SR-SB, MAP: $449.99
- AcoustiFex K-10 Pro: Model FCM-SRA-SB, MAP: $549.99
- Elfin Sound System: Model FCM-SRE-SB, MAP: $549.99
Spruce/Mahogany, Natural Finish
- Solid Torrefied Spruce Top / Layered Mahogany Back & Sides, Natural Finish
- No Pickup: Model FCM-SM, MAP: $399.99
- With AcoustiFex K-10 Pro: Model FCM-SMA, MAP: $499.99
- With Elfin Sound System: Model FCM-SME, MAP: $499.99
Spruce/Mahogany, Sunburst Finish
- Solid Torrefied Spruce Top / Layered Mahogany Back & Sides, Sunburst Finish
- No Pickup: Model FCM-SM-SB, MAP: $399.99
- With AcoustiFex K-10 Pro: Model FCM-SMA-SB, MAP: $499.99
- With Elfin Sound System: Model FCM-SME-SB, MAP: $499.99
Mahogany/Mahogany, Natural Finish
- Solid Torrefied Mahogany Top / Layered Mahogany Back & Sides, Natural Finish
- No Pickup: Model FCM-MM, MAP: $399.99
- With AcoustiFex K-10 Pro: Model FCM-MMA, MAP: $499.99
- With Elfin Sound System: Model FCM-MME, MAP: $499.99
The new Kepma FC Mini Series combines portability, premium materials, and advanced technology to offer an unparalleled sound and playing experience. Whether you’re a traveling musician or a beginner seeking comfort and quality, the FC Mini Series is your perfect companion.
For more information, please visit kepmausa.com.
TOOL'S JUSTIN CHANCELLOR
Justin Chancellor’s Pedalboard
If you ever catch yourself playing air guitar to Tool, you’re probably mimicking Justin Chancellor’s parts. “Schism,” “The Pot,” “Forty Six & 2,” “H.,” “Fear Inoculum,” “Descending,” “The Grudge,” and plenty of others feature his buoyant bass riffs.
What stomps does he run his Wal, StingRay, and Fender basses through? Glad you asked. His setup is either a bass player’s dream or nightmare, but for someone as adventurous as Chancellor, this is where the party starts.
You’ll notice many of his pedals are available at your favorite guitar store, including six Boss boxes, an Ernie Ball Volume Pedal, and MXR Micro Amp. Crucial foot-operated pedals are in blue: the Dunlop JCT95 Justin Chancellor Cry Baby Wah with a Tone Bender-style fuzz circuit (far left) and DigiTech Bass Whammy (middle). He really likes using the Tech 21 SansAmp GT2 for distortion and feedback when the Whammy is engaged or he’s playing up the neck. Covering delays are three pedals—he has the pink Providence DLY-4 Chrono Delay programmed to match drummer Danny Carey’s BPMs in “Pneuma,” which slightly increase during the song from 113 ms to 115 ms. The Boss DD-3s are set for different speeds with the one labeled “Faster” handling “The Grudge” and the other one doing more steady repeats. There’s a pair of vintage Guyatone pedals—the Guyatone VT-X Vintage Tremolo Pedal (Flip Series) and Guyatone BR2 Bottom Wah Rocker (a gift from guitarist Adam Jones). The Gamechanger Audio Plus pedal is used to freeze moments and allow Justin to grab onto feedback or play over something. The Boss GEB-7 Bass Equalizer and Pro Co Turbo RAT help reinforce his resounding, beefy backbone of bass tone, while the MXR Micro Amp helps goose his grimy rumbles. The Boss LS-2 Line Selector is a one-kick escape hatch out of the complicated signal chain for parts of “Schism.” The Wal and Music Man stay in check with the TU-3S tuner, a pair of Voodoo Lab Pedal Power 2 Pluses help bring things to life, and everything is wired up with EBS patch cables.
STURGILL SIMPSON AND LAUR JOAMETS
Sturgill Simpson’s Pedalboard
Alt-country veteran Sturgill Simpson packed light for his latest run. His board bears just a Peterson Stomp Classic tuner running into a Fulltone True-Path ABY-ST, which splits his signal to his two Magnatone Panoramic Stereo amps. “I wouldn’t use a tuner if I didn’t have to,” he chuckles. The LILY P4D beside the splitter lets him control his mic signal to cut interference from onstage noise.
Laur Joamets’ Pedalboard
For his main board, Laur Joamets packs a little heavier than his boss. The platform, made by West Coast Pedal Board, carries a Peterson StroboStomp, Greer Amps Arbuckle Trem, sRossFX fuzz/overdrive, MXR Booster, T-Rex Replica, sRossFX germanium octave pedal, TC Electronic Viscous Vibe, Dunlop EP103 Echoplex, and Source Audio True Spring Reverb. An MXR Tap lets him tap in delay tempos. He has a second pedalboard, as well, for his Stage One steel guitar. It goes into a Peterson StroboStomp HD, then on to a Greer Black Tiger and Goodrich Sound Company volume pedal, before hitting his Magnatone Varsity Reverb and a custom-built Fender brown-panel Deluxe clone he calls “the Charmer.”
PANTERA’S ZAKK WYLDE AND REX BROWN
Zakk Wylde’s Pedalboard
When Pantera’s bassist Rex Brown and singer Phil Anselmo decided to fire the band up again, the choice of fellow road dog Zakk Wylde on guitar seemed perfect. Here’s what Wylde had on the floor and in the racks for the band’s February date at Nashville’s Bridgestone Arena.
His signature arsenal of effects seen here includes a MXR Wylde Audio Overdrive, MXR Wylde Audio Phase, Wylde Audio Cry Baby wah, and a Dunlop ZW357 Zakk Wylde Signature Rotovibe. The lone box that isn’t branded Wylde is a standard fare MXR Carbon Copy. Offstage, his rack is home to a MXR Smart Gate and MXR Wylde Audio Chorus that’s always on. Both are powered by a Voodoo Lab Pedal Power 3 Plus. Another drawer holds a Radial BigShot I/O True-bypass Instrument Selector, Lehle Little Dual II Amp Switcher, and a Radial BigShot EFX Effects Loop Switcher.
Rex Brown’s Pedalboard
This tour was the first time Rex Brown used a switching system. His stage board sported a Dunlop JCT95 Justin Chancellor Cry Baby Wah, a 2000s Morley Pro Series II Bass Wah, Origin Effects DCX Bass Tone Shaper & Drive, a MXR M287 Sub Octave Bass Fuzz, and a Peterson StroboStomp HD. The brain of everything in the rack and onstage is the RJM Mastermind GT. And to help “move mountains,” Rex has a Moog Taurus III.
MSSV’S MIKE BAGGETTA AND MIKE WATT
Mike Baggetta’s Pedalboard
Mike Baggetta has some core pedals in MSSV, his indie supergroup with legendary bassist Mike Watt and drummer Stephen Hodges. His arsenal includes a Creepy Fingers Hold Tight fuzz, an Electro-Harmonix Ring Thing, a Wilson Effects Freaker Wah V2, an EHX Deluxe Memory Man, and a Red Panda Tensor. The signal flows from his Benson amp into the Tensor, which he uses for glitch sounds, harmonizing, and overdub mode, among other feats. His Memory Man adds space—the final frontier.
Mike Watt’s Pedalboard
Mike Watt puts his signature Reverend Wattplower bass into a Broughton Audio high-pass filter, an EarthQuaker Devices The Warden optical compressor, and a Sushi Box Effects Finally tube DI that functions as a preamp. There’s also a TC Electronic PolyTune.
MONONEON
MonoNeon’s Pedalboard
The Memphis-born avant-funk bassist keeps it simple on the road with a signature 5-string, a tried-and-true Ampeg stack, and just four stomps. Almost all of his stomps have been zhuzhed up in his eye-popping palette. He’d used a pitch shifting DigiTech Whammy for a while, but after working with Paisley Park royalty, the pedal became a bigger part of his playing. “When I started playing with Prince, he put the Whammy on my pedalboard,” Thomas explains. “After he passed, I realized how special that moment was.” MonoNeon also uses a Fairfield Circuitry Randy’s Revenge, a Fart Pedal (in case the Fairfield ring mod isn’t weird enough, we guess), and a JAM Pedals Red Muck covers fuzz and dirt needs. A CIOKS SOL powers the whole affair.
GRACE BOWERS
Grace Bowers’ Pedalboard
Grace Bowers is one of the freshest new guitar stars to emerge in the past year. She has the essential fixin’s for her classic rock tones: a Dunlop Crybaby Wah, Grindstone Audio Solutions Night Shade Drive, EarthQuaker Devices Tone Job, MXR Phase 90, MXR Phase 95, and Boss DD-2. Bowers powers them with a Voodoo Labs Pedal Power ISO-5.
GREEN DAY’S JASON WHITE
Photo by Raph Pour-Hashemi
Jason White’s Pedalboard
Long-time touring member Jason White’s stable is dominated by his Gibson Les Pauls and ES-335s. A Shure wireless system sends his signal to a rack set-up with an ISP noise gate, just in case White’s P-90s are picking up a lot of noise. From there, it hits a Dunlop Cry Baby and DVP1XL, then a MIDI-controllable RJM Effect Gizmo, which handles White’s effects: an MXR Reverb and Poly Blue Octave, Strymon TimeLine and Mobius, API Select TranZformer GTR, and a Custom Audio Electronics 3+SE Guitar Preamp, which gets engaged for clean tones and small combo sounds. A Lehle Dual SGoS Switcher and Fishman Aura DI Preamp handle changes with the piezo-equipped guitars. A Strymon Zuma provides the juice.
BONES UK’S CARMEN VANDENBERG
Carmen Vandenberg’s Pedalboard
Carmen Vandenberg covers a lot of ground with her Bones UK guitar sounds, and she’s got a carefully curated collection of stomps to span the territory. Her guitar first hits an Ernie Ball Cry Baby before running through the rest of the pedals: a Boss TU-3, Fulltone OCD, Supro Drive, Pigtronix Octava, EHX Micro POG, Supro Chorus, Blackstar Dept. 10 Boost, EarthQuaker Devices Dispatch Master, MXR Carbon Copy Deluxe, Catalinbread Belle Epoch, and Boss NS-2. A Live Wire Solutions ABY manages the signals on their way to her signature Blackstar CV30s.
BLACK PUMAS’ ADRIAN QUESADA, BRENDAN BOND, AND ERIC BURTON
Adrian Quesada’s Pedalboards
Adrian Quesada loves tremolo and reverb, and uses a Strymon Flint for both. His other main stomp is the Electro-Harmonix Holy Grail that provides a healthy dose of spring reverb. Also along for the tour: a Line 6 Echo Park, a Catalinbread Echorec, a Boss GE-7 Equalizer, a Catalinbread Belle Epoch, and an EarthQuaker Devices. The Fulltone Clyde Wah Deluxe has stepped in for a different filter sweeper. There’s also a JAM Pedals Ripple two-stage phaser, and a TC Electronic PolyTune2 Noir keeps his guitars in check. That’s all on board one.
His second board includes a JHS 3 Series Delay, a JHS Crayon, and an Electro-Harmonix Nano POG. Utility boxes on here—Strymon Ojai, JHS Mini A/B, and TC Electronic PolyTune—handle switching, tuning, and power.Brendan Bond’s Pedalboard
Three pedals get the job done for Mr. Bond: an Acme Audio Motown D.I. WB-3 passive D.I., a JHS Colour Box, and a Boss TU-3 Chromatic Tuner.
Eric Burton’s Pedalboard
Frontman and guitarist Eric Burton is the band’s lone wireless member. To accommodate his onstage prowling, tech Bryan Wilkinson uses a Radial JDI passive direct box that takes in the XLR from the audio subsnake wireless rackmount and routes it into the first pedal: a Boss TU-3 Chromatic Tuner. From there, Burton only has a couple pedals—a DigiTech Mosaic to mimic a 12-string for “OCT 33” and a JHS Colour Box for any required heat. A Strymon Ojai turns everything on.
JASON ISBELL AND SADLER VADEN
Jason Isbell’s Pedalboards
Jason Isbell could open a huge gear shop just by clearing off his boards and racks. First off, he has a complex wet/dry/wet setup that is parsed out via a RJM Mastermind, with two Magnatone Twilight Stereo combos carrying the all-wet effects. There’s also a Radial JX44v2, which serves as the core signal manager. Above it, on the rack, is an Echo Fix Chorus Echo EF-X3R. Moving up the rack, one drawer includes an Ibanez DML10 Modulation Delay II, EarthQuaker Devices Tentacle, and a trio of stereo-field-only effects: a Boss MD-500, Strymon Volante, and Hologram Electronics Microcosm. Another level up, you’ll find a Chase Bliss Preamp Mk II, Chase Bliss Tonal Recall Delay, Chase Bliss Dark World Reverb, Chase Bliss Condor EQ/Filter, Chase Bliss Gravitas Tremolo, Chase Bliss CXM-1978 Reverb (stereo-field only), Keeley 30ms Automatic Double Tracker, gold Klon Centaur, Analog Man Sun Lion Fuzz/Treble Booster, Analog Man King of Tone with 4-jack mod, Keeley 4-knob CompROSSor, Pete Cornish OC-1 Optical Compressor, EHX Micro POG, Analog Man ARDX20 Delay, and a trio of Fishman Aura Spectrum DIs.
Sadler Vaden’s Pedalboard
Isbell’s 6-string sparring partner Sadler Vaden’s pedalboard chain starts with a Dunlop Clyde McCoy Wah, then a Lehle volume pedal, which feeds the Gig Rig. He uses a Line 6 M5 with a Dunlop expression pedal for a lot of modulation effects. Other pedals include a Crowther Prunes & Custard, Nordvang No.1, an Analog Man Dual Analog Delay, Comp, and King of Tone, a Strymon BlueSky, and a Greer Lightspeed. Every effect is isolated into the Gig Rig. The board has four outputs, two for each side of his 3rd Power British Dream, one for a Marshall plexi, and one that goes to an aux line and splits to a Vox Pacemaker. The auxiliary line is as a backup in case Sadler’s amps go down. It consists of a Strymon Iridium into a Seymour Duncan Power Stage that goes to FOH. And finally, his acoustic pedalboard sports a Shure wireless running into an ART Tube MP/C preamp into a L.R. Baggs Venue DI, with a Radial Engineering Bigshot selector.
MICHAEL LEMMO
Michael Lemmo’s Pedalboard
Rising star player Michael Lemmo relies on his stomps for tone sculpting, but he doesn’t need much to get the job done. His signal hits a Korg tuner, followed by an Xotic EP Booster, Bearfoot FX Honey Bee OD, Red Panda Context, Boss DD-7, and TC Electronic Ditto. They’re all juiced by a Truetone 1 Spot Pro CS7.
HELMET’S PAGE HAMILTON
Page Hamilton’s Pedalboard
Page Hamilton used to travel with a full Bradshaw rig with rack gear, but he’s reduced things to a pair of Eventide H9 units and a handful of Boss boxes—a PS-5 Super Shifter, a MT-2W Metal Zone Waza Craft, a TS-2 Turbo Distortion, a NS-2 Noise Suppressor, and a FB-2 Feedbacker/Booster. A couple of Peterson Stomp Classic tuners keep his ESP Horizons ready, and a Boss ES-5 Effects Switching System organizes all his sounds and settings.
BARONESS’ JOHN BAIZLEY, GINA GLEASON, AND NICK JOST
John Baizley’s Pedalboard
The Baroness frontman’s board is packed with staged dirt boxes and tasteful mod stomps, all held in check with a GigRig G2, Peterson StroboStomp, and Ernie Ball Volume Pedal. The crown drive jewels are a heavily modded EHX Big Muff and Crowther Double Hot Cake, but a Beetronics FX Overhive and Pro Co RAT add sizzle, too. A Boss DD-3, DM-2W, and TR-2, EarthQuaker Devices Dispatch Master and Tentacle, MXR Phase 90 and Dyna Comp, and EHX Deluxe Memory Man handle the rest, while a DigiTech Whammy lurks for its moment to blast off.
Gina Gleason’s Pedalboard
Gleason’s favorite drive these days is the EQD Zoar. Piling on top of that are a MXR Super Badass Distortion, MXR Timmy, modded EHX Big Muff, and a touchy Philly Fuzz Infidel prototype; an Xotic SP Compressor and UAFX 1176 Studio Compressor tighten things up when needed. Three time machines—the Strymon TimeLine, EQD Space Spiral, and Boss DD-3—handle delay, and a Walrus Slo dishes out reverb. The MXR EVH Phase 90 adds some color along with another DigiTech Whammy. The Ernie Ball Volume Pedal, Peterson StroboStomp, and GigRig G2 finish the line-up.
Nick Jost’s Pedalboard
The bassist’s board is powered by an MXR Iso-Brick, with an Ernie Ball Volume Pedal and Boss TU-3 pulling utility duties before an Xotic Bass BB Preamp, Boss ODB-3, DOD FX69B Grunge, MXR Stereo Chorus, and Tech 21 SansAmp Bass Driver DI.
WOLFMOTHER’S ANDREW STOCKDALE
Andrew Stockdale’s Pedalboard
When we walked into Nashville’s Eastside Bowl for this Rig Rundown with Wolfmother’s alpha canine, Andrew Stockdale, it sounded like he was playing his SG through a Marshall stack at head-ripping volume. Nope! Stockdale was blasting skulls apart with a Line 6 HX Stomp doing the heavy tonal lifting. The rest of his board’s layout is a Snark floor tuner, an EHX Micro Synth (a Wolfmother staple), an Xotic AC Booster, an EHX Micro POG, a Dunlop Cry Baby 535Q Multi-Wah, a Boss TR-2 tremolo, a CIOKS DC5 power supply, and Shure GLXDC+ wireless.
FEARLESS FLYERS' CORY WONG AND MARK LETTIERI
Cory Wong’s Pedalboard
Through a Shure GLXD16 wireless system, Cory Wong flows his guitar into his Neural DSP Quad Cortex, which runs a beta version of his Archetype: Cory Wong plugin, based off of a melding of a Dumble and a Fender Twin. The signal hits an onboard envelope filter and rarely used pitch shifter, then exits out the effects loop into a Wampler Cory Wong Compressor, Jackson Audio The Optimist, and a Hotone Wong Press. The signal goes back into the Quad Cortex, where there’s a preset phaser, stereo tape delay, and modulated reverb, plus a freeze effect. Two XLR outs run to front of house, while two run to Wong’s Mission Engineering Gemini 2 stereo cabinet.
Mark Lettieri’s Pedalboard
Mark Lettieri’s signal first hits a Keeley Monterey Custom Shop Edition, followed by an MXR Deep Phase, J. Rockett HRM, J. Rockett Melody OD (Lettieri’s signature), Pigtronix Octava, and a Dunlop DVP4, all powered by a Strymon Ojai. A TC Electronic TonePrint Plethora X5 pedalboard handles coordination and switching between the devices.
SLASH’S BLUES BALL BAND
Slash’s Pedalboard
“I haven’t had a pedalboard in front of my feet since the ’80s,” Slash told us. But with the Blues Ball tour, he kept it simple, stomping his own boxes. His chain includes a Peterson StroboStomp, Dunlop Cry Baby, MXR CAE Boost/Line Driver, Ibanez TS9 Tube Screamer, MXR EVH90, BBE Soul Vibe Rotary Simulator, Boss DD-3 Digital Delay, and MXR Uni-Vibe, with everything powered by a Voodoo Lab Pedal Power 2 Plus. All pedals are taped down with their settings dialed in. When his signal leaves the board, it hits a Whirlwind Selector A/B box, where it splits off between his amps and his Talk Box rig.
Tash Neal’s Pedalboard
Tash Neal keeps a modest pedalboard at his feet: a D’Addario Chromatic Pedal Tuner, Dunlop Cry Baby, XTS Custom Pedals Precision Multi-Drive, EHX Green Russian Big Muff, and a Fender Waylon Jennings Phaser, powered by a T-Rex Fuel Tank.
RANCID’S MATT FREEMAN
Matt Freeman’s Pedalboard
Bassist Matt Freeman’s signal goes wireless into one of his Avalon U5 Class A Active Instrument DI and Preamps, and then through a Way Huge Pork Loin Overdrive, set to give his Bassman a good push.
CHRISTONE “KINGFISH” INGRAM
Kingfish’s Pedalboard
Kingfish’s signal starts with a Shure Wireless BLX4, which hits a Boss TU-3w Chromatic Tuner. From there, the route is a Dunlop Cry Baby Mini Wah, a Marshall ShredMaster, and a Boss DD-3 Delay. The pedals live on a Pedaltrain Nano board and were assembled by Barry O’Neal at XAct Tone Solutions.
DIXIE DREGS’ STEVE MORSE
Steve Morse’s Pedalboard
Steve plays through a pair of 3-channel Engl Steve Morse signature 100-watt amps—one wet, one dry—but his pedal chain is relatively simple: a Keeley Compressor, two Ernie Ball volume pedals, two TC Flashbacks, a TC Electronic Polytune, and a foot controller for his Engls.