Combining a comprehensive knowledge of fretboard harmony with a take-no-prisoners approach, Kessel was a force to be reckoned with.
Intermediate
Intermediate
- Learn bite-sized Barney Kessel-isms you can immediately add to your own playing.
- Experiment with how Kessel used his fretting-hand thumb… if you dare.
- Examine Kessel’s approach to playing and harmonizing improvised lines.
Yeah. The guy means business.
Let’s take a look at some key elements of Kessel’s style by exploring one particular tune: his terrific live arrangement of Jimmy Van Heusen’s “Here’s That Rainy Day,” which I recently watched on YouTube. It features various hallmarks of his playing, and it’s where we’ll get all the following music examples.
Before getting started, note that Kessel used a pick almost exclusively, very rarely playing fingerstyle. All examples in this lesson are played with a pick.
Kessel’s Chordal Cool
When playing chords, Kessel frequently used his fretting-hand thumb, something unorthodox for most jazz players of the day. In fact, he would regularly use it to fret both the 6th and 5th strings simultaneously. In the first measure of Ex. 1, note how this enables him to include the low A when playing the D7b9/A. This type of voicing is rare in jazz guitar, as the resulting fourth interval between the lowest two notes creates a thicker sound most jazz players tend to stay away from. However, in Kessel’s hands, it just works.
Kessel was a master of tastefully filling in the open spaces which naturally occur in melodies. In the midst of his solo chord/melody intro, he extends a bar of Gmaj7 into two with a series of triads over a G drone, a favorite arranging technique of his (Ex. 2). Notice how he instead uses a G7 tonality in order to segue to the approaching Cm7. Note that this passage is again made possible by the use of his fretting-hand thumb on the 6th string.
Kessel’s facility with chord voicings is certainly not uncommon among jazz greats, but he had various Kessel-isms that he’d frequently draw upon in his playing. No lesson about Kessel would be complete without the minor 7th chord move in Ex. 3. Notice how he climbs up and down various extensions along the way—the 9 (E) and 11 (G)—before briefly shifting up a half-step to dramatic effect. You’ll find this figure can be applied in all sorts of situations where minor 7th chords appear, and Kessel uses it quite a bit.
Bend It Like Barney
A rock ’n’ roll-style blues lick in a jazz lesson may be a surprise, but let’s look at how Kessel effectively made this a part of his arsenal like few others of his day. In Ex. 4 he launches into a tasty blues lick over a classic IIIm–VI–IIm–V turnaround in the key of G major. While primarily drawing from the G blues scale (G–A–Bb–C–Db–D–F), he also includes a few notes from the G major scale (G–A–B–C–D–E–F#), most notably in the initial bend. Give this phrase a whirl, even if you’ve played these sorts of blues licks before. Remember, it’s how and where he’s using it that makes it so effective.
And, hey, when’s the last time you saw a jazz guitarist break a string while bending? As you’ll see in the following video, Kessel sure did…
… and it didn’t faze him one bit. It’s worth noting that as a member of the Wrecking Crew, the legendary group of first-call session musicians, he played on many popular songs throughout the 1960s (including an appearance on the classic Beach Boys’ album Pet Sounds). So, he was hip to what was going on at the time, and was involved in all sorts of musical situations outside of jazz.
Nifty Lines
Kessel was a master of improvisation, crafting lightning-quick jazz lines on the fly. Here’s one which occurs just after the above blues phrase (Ex. 5). Sure, it’s a common approach in jazz to anticipate a chord before it arrives, but here Kessel uses just about the entire second measure to foreshadow the Fm7 before it ultimately makes its entrance in measure three. His left hand doesn’t appear in the video, but you do get a close-up view of his use of sweep picking.
Kessel would also fearlessly venture into harmonizing his lines, most often using major and minor thirds. In Ex. 6 he begins with a quick ascending figure; then, for the descending figure which follows, be sure to use only your first and second fretting-hand figures on the high two strings, as he does, to keep the fingering nice and smooth.
In addition, Kessel deftly wove lines in between chords to build excitement. During the tune’s free-time intro, he adds some beautiful legato flourishes (Ex. 7).
Not surprisingly, Kessel was quite creative when fashioning endings for his arrangements, and this tune is no exception. After a slick fretting-hand thumb slide, he careens through a series of chromatically descending chordal stabs. Then, true to form, he ends with that very same thumb fretting the two lowest strings of the final chord (Ex. 8).
Wait— No Rig Rundown?!
Of course, like most jazzers of the day, Kessel simply plugged his guitar directly into an amp — in his case, a Gibson BR–3. But his guitar was rather unique — a modified Gibson ES–350 from 1946. So we’ll give BK the last word, as he gives you the inside scoop on his favorite axe.
Nashville's historic Gruhn Guitars give PG an exclusive look at a very early amp that is a piece of rock history that preceded the heralded JTM45. Amp builder and reverb aficionado Eric Borash of Ebo Sounds shares his expertise on this rare amp's lineage, while John Bohlinger plugs in Dan Auerbach's old '60s ES-335 to test it out.
Beetronics FX Tuna Fuzz pedal offers vintage-style fuzz in a quirky tuna can enclosure.
With a single "Stinker" knob for volume control and adjustable fuzz gain from your guitar's volume knob, this pedal is both unique and versatile.
"The unique tuna can format embodies the creative spirit that has always been the heart of Beetronics, but don’t let the unusual package fool you: the Tuna Fuzz is a serious pedal with great tone. It offers a preset level of vintage-style fuzz in a super simple single-knob format. Its “Stinker” knob controls the amount of volume boost. You can control the amount of fuzz with your guitar’s volume knob, and the Tuna Fuzz cleans up amazingly well when you roll back the volume on your guitar. To top it off, Beetronics has added a cool Tunabee design on the PCB, visible through the plastic back cover."
The Tuna Fuzz draws inspiration from Beetronics founder Filipe's early days of tinkering, when limitedfunds led him to repurpose tuna cans as pedal enclosures. Filipe even shared his ingenuity by teachingclasses in Brazil, showing kids how to build pedals using these unconventional housings. Although Filipe eventually stopped making pedals with tuna cans, the early units were a hit on social media whenever photos were posted.
Tuna Fuzz features include:
- Single knob control – “Stinker” – for controlling output volume
- Preset fuzz gain, adjustable from your guitar’s volume knob
- 9-volt DC operation using standard external power supply – no battery compartment
- True bypass switching
One of the goals of this project was to offer an affordable price so that everyone could own a Beetronicspedal. For that reason, the pedal will be sold exclusively on beetronicsfx.com for a sweet $99.99.
For more information, please visit beetronicsfx.com.
What are Sadler’s favorite Oasis jams? And if he ever shares a bill with Oasis and they ask him onstage, what song does he want to join in on?
Once the news of the Oasis reunion got out, Sadler Vaden hit YouTube hard on the tour bus, driving his bandmates crazy. The Jason Isbell and the 400 Unit guitarist has been a Noel Gallagher mega-fan since he was a teenager, so he joined us to wax poetic about Oasis’ hooks, Noel’s guitar sound, and the band’s symphonic melodies. What are Sadler’s favorite Oasis jams? And if he ever shares a bill with Oasis and they ask him onstage, what song does he want to join in on?
Check out the Epiphone Noel Gallagher Riviera Dark Wine Red at epiphone.com
EBS introduces the Solder-Free Flat Patch Cable Kit, featuring dual anchor screws for secure fastening and reliable audio signal.
EBS is proud to announce its adjustable flat patch cable kit. It's solder-free and leverages a unique design that solves common problems with connection reliability thanks to its dual anchor screws and its flat cable design. These two anchor screws are specially designed to create a secure fastening in the exterior coating of the rectangular flat cable. This helps prevent slipping and provides a reliable audio signal and a neat pedal board and also provide unparalleled grounding.
The EBS Solder-Free Flat Patch Cable is designed to be easy to assemble. Use the included Allen Key to tighten the screws and the cutter to cut the cable in desired lengths to ensure consistent quality and easy assembling.
The EBS Solder-Free Flat Patch Cable Kit comes in two sizes. Either 10 connector housings with 2,5 m (8.2 ft) cable or 6 connectors housings with 1,5 m (4.92 ft) cable. Tools included.
Use the EBS Solder-free Flat Patch Cable Kit to make cables to wire your entire pedalboard or to create custom-length cables to use in combination with any of the EBS soldered Flat Patch Cables.
Estimated Price:
MAP Solder-free Flat Patch Cable Kit 6 pcs: $ 59,99
MAP Solder-free Flat Patch Cable Kit 10 pcs: $ 79,99
MSRP Solder-free Flat Patch Cable Kit 6 pcs: 44,95 €
MSRP Solder-free Flat Patch Cable Kit 10 pcs: 64,95 €
For more information, please visit ebssweden.com.