
Focusrite announces the launch of Scarlett 4th Gen. The new range features the Solo, 2i2, 4i4, Solo Studio, and 2i2 Studio, designed to offer greater audio specifications, enhanced creative capabilities, and unprecedented ease-of-use.
The new Scarlett range boasts better specs than any previous generation of Scarlett. Key features include Auto Gain, Clip Safe and a re-engineered Air mode, cementing its status as a giant leap for the acclaimed range.
Scarlett Solo
The Scarlett Solo is ideal for singer-songwriters. With one mic preamp, one Hi-Z instrument/line input and brand-new custom-designed headphone amp, Solo provides stunning audio quality in a compact design perfect for home studios and on-the-go recording. Solo also features the re-engineered Air mode with Presence, and all-new Harmonic Drive, to breathe life into vocals and acoustic instruments.
Scarlett 2i2
For the aspiring artist, the Scarlett 2i2 offers two remote-controlled mic preamps and two Hi-Z instrument/line inputs for guitars, keys and groove boxes. The iconic 2-in/2-out interface delivers professional studio quality in a portable package. With powerful new features like Clip Safe, Auto Gain and Air mode, the 2i2 empowers artists to make release-ready recordings anywhere.
Scarlett 4i4
For the multi-instrumentalist, the Scarlett 4i4 provides two remote-controlled mic preamps, switchable line or Hi-Z instrument inputs, two fixed line inputs, and four balanced outputs for the flexibility to record mics, guitars, synths and more. MIDI I/O makes it easy to bring in synths and grooveboxes to sync with recording sessions. The 4i4 brings professional studio quality within reach for home musicians who want to connect more of their gear at once. 4i4 also includes new features like Clip Safe, Auto Gain and the re-engineered Air mode.
The Scarlett Solo Studio and Scarlett 2i2 Studio packs provide an all-in-one solution for high-quality recording. Including either a Solo or 2i2 interface, CM25 MkIII studio condenser mic and closed-back SH-450 headphones, these bundles have everything needed to start recording studio-quality vocals and instruments right out of the box.
Scarlett Solo Studio
The Scarlett Solo Studio and Scarlett 2i2 Studio packs provide an all-in-one solution for high-quality recording.
Scarlett 2i2 Studio
Including either a Solo or 2i2 interface, CM25 MkIII studio condenser mic and closed-back SH-450 headphones, these bundles have everything needed to start recording studio-quality vocals and instruments right out of the box.
Features
Focusrite has completely re-engineered the audio circuitry and introduced professional-grade converters for incredible performance. Scarlett 4th Gen uses converters from Focusrite's flagship RedNet range to deliver a massive 120dB dynamic range. 2i2 and 4i4 now feature remote-controlled preamps with 69dB of gain to get the best sound out of every mic. A custom-designed headphone amp drives high-impedance headphones louder and clearer than any previous Scarlett. In addition, all models now have independent controls for headphones and monitors.
With Auto Gain, users will never have to worry about setting levels again. Just play or sing for ten seconds, and Auto Gain will set the perfect level for recording. Clip Safe monitors levels up to 96,000 times per second and automatically adjusts the gain to prevent clipping, allowing users to fully immerse in performing and not have to worry about their levels. The re-engineered Air mode takes a sound's unique character and brings it to the front of the mix, for standout vocal or instrument tracks. Air mode includes the original all-analogue Presence mode, plus a new DSP-based Harmonic Drive mode for console-like richness.
The new design combines elegance, functionality and accessibility. Details include premium Neutrik connectors, spacious knob placement, and endless gain knobs on 2i2 and 4i4. Complemented by Scarlett's iconic red, the front panel showcases a sleek black finish and soft touch knobs.
The Dynamic Gain Halos make it easy to set and monitor levels. This update to the iconic Scarlett Gain Halos enables users to set the perfect level and get great results every time.
Loopback routes computer audio to DAWs with ease via Scarlett's virtual inputs. It can also mix Scarlett inputs and computer audio for sampling from other software, streaming and recording flexibility.
Focusrite's Easy Start tool quickly guides users through setup, so they're ready to record with the included Ableton Live Lite and three months of Pro Tools Artist recording software. To help users get the best results for recording, mixing and mastering, the Hitmaker Expansion software bundle provides a complete suite of iconic studio plugins from some of the industry's biggest names, including Softube, Native Instruments, Antares, and many more. Also included are five free masters from Landr that can be used at any time, plus a two-month subscription to Landr Studio, offering and unlimited music distribution on streaming platforms such as Spotify, Apple Music, YouTube Music and TikTok.
Focusrite Control 2 is also provided and enables remote control setup and mixing from a PC or Mac.
Pricing
USD ex. tax
- Solo - $139.99
- 2i2 - $199.99
- 4i4 - $279.99
- Solo Studio - $249.99
- 2i2 Studio - $299.99
Available now at focusrite.com and authorised dealers globally.
- Focusrite Announces the 2x2 Dante Interface ›
- Focusrite Launches Scarlett 3rd Generation Range ›
- Can This Elf Sit on a Shelf? ›
- New Scarlett Interfaces by Focusrite - Premier Guitar ›
It’s almost over, but there’s still time to win! Enter Stompboxtober Day 30 for your shot at today’s pedal from SoloDallas!
The Schaffer Replica: Storm
The Schaffer Replica Storm is an all-analog combination of Optical Limiter+Harmonic Clipping Circuit+EQ Expansion+Boost+Line Buffer derived from a 70s wireless unit AC/DC and others used as an effect. Over 50 pros use this unique device to achieve percussive attack, copious harmonics and singing sustain.
Neil’s brother-in-law Billy’s Ovation, before Neil’s repairs.
Reader: Neil Crump
Hometown: Austin, Texas
Guitar: King of the Road
When his brother-in-law passed away, this reader made it his mission to repair his old damaged Ovation guitar as a gift to his niece.
My brother-in-law passed away in March. He was a talented keyboardist and, in his heyday, played in bands that toured internationally. As a musician, he naturally had a guitar—a 1974 Ovation—and a “friend” put an unauthorized abstract paint job on it. That guitar had an extremely hard life: Its top was broken and the frets were completely worn out. As an aspiring luthier, I took the guitar to repair it then pass it on to his daughter. This proved to be a challenging task as I had never done anything more complicated than a basic setup before and I had few luthier tools.
A heat gun and thin spatula knife worked fine to remove the top and the bridge. I did my best to glue the new top halves together—but that left a visible seam, so I put a herringbone center strip over it (to match the purfling I would install later). I had no radius board, so I just clamped the pre-radiused braces I bought and was quite pleased that the new top did have a radius! Once I felt the bridge was sanded perfectly, I glued it down. I then replaced the plastic nut and saddle with bone. A hot soldering iron got the old frets out without damaging the fingerboard. (That said, next time I will clean those slots out better before installing new frets!)
“This proved to be a challenging task as I had never done anything more complicated than a basic setup before and I had few luthier tools.”
I was happy with my progress until I started routing the purfling channel. I had no workbench, and the concave Ovation body made things a bit awkward. While basically “bear hugging” the body with one arm and holding the router with the other, I heard a faint “pop.” The edge of an X-brace had come loose. I was able to squirt glue into the void with a syringe, but the concave guitar body made a brace jack useless (without fabricating a complicated caul). I removed the phono jack and jammed a pencil into the brace, keeping pressure on it with a rubber band. It worked!
Neil gave the Ovation a new lease on life with his extensive repairs, the end result of which can be seen here.
I also learned the importance of channel depth with purfling—I did lots of scraping to get everything flush. I am pleased with the finished product and my niece is so happy! I also put a new label inside the guitar body, with a dedication to her father on it.
Overall, there are multiple wins on this project. I gave tribute to my brother-in-law, made his daughter happy, and learned enough to build a guitar from scratch.
Two horns? It must be a Bison!
Our columnist links a few memories together to lead us to another obscure guitar model—one he remembers from his childhood and came to acquire as an adult.
Do you have any “click and stick” movies that you love? Like when you are channel surfing and see a movie that you’ve watched a lot, and then just watch it again? Lately, for me, it’s been the 2015 movie The Revenant. It’s a truly brutal tale of survival set in 1820s frontier America. My gosh, that movie just draws me in every time. There’s one scene where the main character goes flying off a cliff while riding a horse! He just sort of falls/rolls through a pine tree and lands in the snow … and he still survives! It’s crazy!
It makes me think about an old childhood friend who lived up the street from me. Jerry and his parents lived in an old house on their grandparents’ large plot of land. On one part of the land there was an old orchard filled with all types of fruit trees and pines, and I remember how we would climb to the top of the pines and just roll ourselves down the side, Revenant style! If you fell the right way, the branches would kind of gently let you down to the next, but if you hit it wrong and got in between the branches, you’d be wrecked. It’s like we enjoyed getting hurt, and, of course, when you’re young, you can snap right back. Ah, the days when pain really didn’t hurt. Now I wake up with injuries, for real.
“The action was way high and the fret ends were sharp. It was basically a painful affair.”
So why am I talking about my click-and-stick movie and stupid childhood escapades? Well, let’s get back to memories of my old friend Jerry. First, the house he lived in was so old that it had real wooden siding, but it hadn’t been painted in forever so the exterior took on a worn, faded, haunted house vibe. Second, his carpet was so tattered that it was being held together with duct tape. Lastly, I remember his dad had a cool, old electric guitar in the living room. His dad would let me play it sometimes, and I remember that it actually hurt to play! The action was way high and the fret ends were sharp. It was basically a painful affair. Not falling-out-of-a-tree painful, but as bad as it comes with guitars. It had the label “Conrad,” and young Frank didn’t realize that he’d be looking for that guitar again one day. I mean, it did have four pickups and lots of knobs and switches!
Made at the old Japanese Matsumoko factory in the ’60s, this Conrad Bison 1233 has four pickups and a 27" scale.
Years later, I would discover that his was a Conrad Bison guitar. The model came in a few different configurations, but the four-pickup design was designated as the 1233. Primarily featuring a lovely sunburst, these Bisons were made at the amazing old Matsumoku factory in Japan and were imported by the David Wexler Company that was based in Chicago. Matsumoku always had a good supply of aged wood, and many of the guitars made there are resonant and built well. The Bisons first appeared around 1966 and had a rather good run into the early ’70s.
Simple volume/tone knobs are paired with preset solo/rhythm switches that power alnico magnets. There’s an on/off switch for each pickup, and the sound really covers all the bases. Thumpy lows and crisp highs are all there. And, the pickups handle fuzz and distortion with ease. The Bisons also came in one- and two-pickup configurations with a normal scale, but the four-pickup ones have a longer, 27" scale, which is common for Matsumoku-made electrics.
So there it is: pain, survival, American frontier, Bison, haunted houses. It all sticks together like a duct-taped carpet. Click and stick, baby!
A 1000-watt speaker cabinet crafted for musicians who demand power and precision. Sunn Amps intends to reinvent the standard 4x12 configuration with the introduction of this new cabinet.
The Sunn Amps DoomBox is built to accommodate both guitar and bass, offering an impressive 1000-watt handling capacity—making it the first commercially available 4x12 cabinet with such high power handling. With four specially designed 12” drivers rated at 250 watts each, this cabinet provides clean, unrestrained sound levels that can maintain power integrity across all frequencies, ideal for high-volume performances.
Inspired and developed using feedback from artists and bands who rely on the depth of lower tunings and high volume genres, the DoomBox was engineered to meet the unique demands of professional musicians looking for a robust, high-efficiency cab that can translate the raw power of their sound without compromise.
Premium Craftsmanship and Materials
The Doom Box cabinet is crafted from solid finger-jointed Baltic Birch plywood, ensuring both durability and tonal clarity. Each cabinet is constructed by hand in the U.S.A. using original 1930s machinery, the DoomBox reflects Sunn’s historic commitment to quality, contrasting with some of the mass-produced, MDF-based cabinets on the market today. The cabinet’s aluminum basket, ferrite magnet, and custom Sunn weave Tolex with a custom grill design complete its professional-grade build.
Technical Specifications:
• Power Handling: 1000W
• Inputs: 1 x ¼”
• Impedance: 8 Ohm
• Drivers: 4 x Sunn 12S250
• Construction: Marine Grade Baltic Birch
• Dimensions: 29.25” X 30” X 14”
• Weight: 107 lbs
• Price: $2399.00
With clear low-end punch, even sound response, and ample air movement, the Doom Box ensures that every note reaches the audience with clarity and power. This cabinet is a game-changer for musicians who need high-performance, road-ready equipment that enhances their unique sound.