Joe Satriani’s G3 returns with Reunion Live, an album that sets out to capture the energy and essence of their sold-out 2024 US tour.
This reunion features guitar icons Joe Satriani, Eric Johnson and Steve Vai—who first joined forces in 1996. The live album showcases the boundary-pushing performances that define G3. Fans will enjoy full sets from each guitarist, including hits like Satriani’s “Sahara,” Johnson’s “Cliffs of Dover,” and Vai’s “For the Love of God,” along with a thrilling encore jam of Hendrix and Clapton covers.
In addition to the live experience, Reunion Live offers new live albums from each artist, plus a collaborative supergroup LP. Available in multiple formats, the deluxe edition features a different colored vinyl for each artist, a special splatter LP for the jam sessions, and a 64-page photo book, divided into separate artists and jam chapters, documenting this monumental event. It is also available in a 2CD set with a 16-page photo booklet. The album perfectly mirrors the live tour format, with individual sets followed by an epic jam session featuring all three guitarists.
Pre-order here.
Satriani says, “This live album recorded at The Orpheum Theatre in Los Angeles captures all the energy of the live performances while shining a spotlight on the ever-evolving art of playing the electric guitar.”
Tracklisting (all formats):
- Gravitas (Vai)
- Avalancha (Vai)
- Little Pretty Intro (Vai)
- Little Pretty (Vai)
- Tender Surrender (Vai)
- Zeus in Chains (Vai)
- Teeth of the Hydra (Vai)
- For the Love of God (Vai)
- Land of 1000 Dances (Johnson)
- Righteous (Johnson)
- Trail of Tears (Johnson)
- On-Ramp Improv (Johnson)
- Freeway Jam (Johnson)
- Desert Rose (Johnson)
- Venus Reprise (Johnson)
- Raspberry Jam Delta-V (Satriani)
- Surfing with the Alien (Satriani)
- Satch Boogie (Satriani)
- Sahara (Satriani)
- Nineteen Eighty (Satriani)
- Big Bad Moon (Satriani)
- Always with Me, Always with You (Satriani)
- Sumer Song (Satriani)
- Introductions
- Crossroads (Encore Jam)
- Spanish Castle Magic (Encore Jam)
- Born to Be Wild (Encore Jam)
This month’s mod Dan’s uses a 500k linear pot, a 1.5H inductor (L) with a 0.039 µF (39nF) cap (C), and a 220k resistor (R) in parallel.
Don’t let the name fool you, this is a purely passive device—nothing is going to be boosted. In general, you can’t increase anything with passive electronics that isn’t already there. Period. But you can reshape the tone by deemphasizing certain frequencies and making others more prominent (so … “boost” in guitar marketing language). Removing highs makes lows more apparent, and vice versa. In addition, the use of inductors (which create the magnetic field in a guitar circuit) and capacitors will create resonant peaks and valleys (bandpasses and notches), further coloring the overall tone. This type of bandpass filter only allows certain frequencies to pass through, while others are blocked, and it all works at unity gain.
“You can’t increase anything with passive electronics that isn’t already there … but you can reshape the tone by deemphasizing certain frequencies and making others more prominent.”
All the systems I mentioned above are doing more or less the same thing, using different approaches and slightly different component values. They are all meant to be updated tone controls. Our common tone circuit is usually a variable low-pass filter (aka treble-cut filter), which only allows the low frequencies to pass through, while the high frequencies get sent to ground via the tone cap. Most of these systems are LCR networks, which means that there is not only a capacitor (C), like on our standard tone controls, but also an inductor (L) and a resistor (R).
In general, all these systems are meant to control the midrange in order to scoop the mids, creating a mid-cut. This can be a cool sounding option, e.g. on a Strat for that mid-scooped neck and middle tone.
Dan Torres offered his “midrange kit” via an internet shop that is no longer online, same with his business website. The Torres design is a typical LCR network and looks like the illustration at the top of this column.
Dan’s design uses a 500k linear pot, a 1.5H inductor (L) with a 0.039 µF (39nF) cap (C), and a 220k resistor (R) in parallel. Let’s break down the parts piece by piece:
Any 500k linear pot will do the trick, in one of the rare scenarios where a linear pot works better in a passive guitar system than an audio pot.
(C) 0.039µF cap: This is kind of an odd value. Keeping production tolerances of up to 20 percent in mind, any value that is close will do, so you can use any small cap you want for this. I would prefer a small metallized film cap, and any voltage rating will do. If you want to stay as close as possible to the original design, use any 0.039 µF low-tolerance film cap.
(L) 1.5H inductor: The original design uses a Xicon 42TL021 inductor, which is easy to find and fairly priced. This one is also used in the Bill Lawrence Q-Filter design, the Gibson standard Varitone, and many other systems like this. It’s very small, so it will fit in virtually every electronic compartment of a guitar. It has a frequency range of 300 Hz up to 3.4 kHz, with a primary impedance of 4k ohms (that’s the one we want to use) and a secondary impedance of 600 ohms. Snip off the three secondary leads and the center tap of the primary side and use the two remaining outer primary leads; the primary side is marked with a “P.” On the pic, you can see the two leads you need marked in red, all other leads can be snipped off. You can connect the two remaining leads to the pot either way; it doesn’t matter which of them is going to ground when using it this way.
Drawing courtesy of singlecoil.com
(R) 220k: use a small axial metal film resistor (0.25 W), which is easy to find and is the quasi-standard.
Other designs use slightly different part values—the Bill Lawrence Q-filter has a 1.8H L, 0.02 µF C and 8k R, while the old RA Gresco Tone Qube from the ’80s has a 1.5H L, 0.0033 µF C, and a 180k R, so this is a wide field for experimentation to tweak it for your personal tone.
This mid-cut system can be put into any electric guitar not only as a master tone, but also together with a regular tone control or something like the Fender Greasebucket, or it can be assigned only to a certain pickup. It can be a great way to enhance your sonic palette, so give it a try.
That’s it! Next month, we’ll take a deeper look into how to fight feedback on a Telecaster. It’s a common issue, so stay tuned!
Until then ... keep on modding!