Premier Guitar features affiliate links to help support our content. We may earn a commission on any affiliated purchases.

NAMM '10 - Brace Audio DWG-1000 Wireless Units

PG's Joe Coffey is On Location in Anaheim, CA, for the 2010 NAMM show where he visits the Brace Audio booth.In this segment, we get introduced to Brace Audio's DWG-1000 wireless units that can range about 100 feet and has a battery life of over 5 hours on AA batteries. Some of the unit's specs; RF Output Power: 16 dbm, Maximum Input Level: 2.75v peak to peak, THD: 2% @ 800 mV pp 1 kHz tone, S/N Ratio: more than 90 dB, Output: 33mm, 1/8 in. mono Jack System gain: 1, Frequency: 2.4 Ghz, FHSS,?Input Impedance: 600K ohm, Operating Power Voltage: 3.0V Typical, Audio Frequency Response: 10 Hz - 15 kHz, Antenna: Internal dome, Units operating at same time: 8-12.



PG's Joe Coffey is On Location in Anaheim, CA, for the 2010 NAMM show where he visits the Brace Audio booth.

In this segment, we get introduced to Brace Audio's DWG-1000 wireless units that can range about 100 feet and has a battery life of over 5 hours on AA batteries. Some of the unit's specs; RF Output Power: 16 dbm, Maximum Input Level: 2.75v peak to peak, THD: 2% @ 800 mV pp 1 kHz tone, S/N Ratio: more than 90 dB, Output: 33mm, 1/8 in. mono Jack System gain: 1, Frequency: 2.4 Ghz, FHSS,?Input Impedance: 600K ohm, Operating Power Voltage: 3.0V Typical, Audio Frequency Response: 10 Hz - 15 kHz, Antenna: Internal dome, Units operating at same time: 8-12.