Cartwheel: Hotline TNT’s Sweeping Shoegaze Journey of Love and Heartbreak

Hotline TNT is helmed by Will Anderson (on the right), but the interplay between him and fellow guitarist Olivia Garner (second from right) has come to define the band’s massive, shoegaze-influenced wall of sound.
Will Anderson was teaching at a New York high school—until Jack White’s record label came knocking. Now, his band is shooting into the shoegaze stratosphere behind their second record, Cartwheel.
Hotline TNT singer and guitarist Will Anderson started writing songs as a way to work through personal relationships, so it’s no surprise that the New York band’s second LP, Cartwheel, encapsulates Anderson’s modern-day, bard-like quest for romance—for better and for worse—through heavy fuzz pedals, distorted guitars, and layered sonic textures that cascade over propulsive rhythms. Slick engineering from punk artist Ian Teeple and Aron Kobayashi Ritch lift the record into the sweeping shoegaze stratosphere, that bottomless niche of music where heartbreak and mammoth, verbed-out riffs cry on each other’s shoulders.
Each of the 12 tracks on Cartwheel features enormous guitar sounds from Anderson and guitarist Olivia Garner that, together, comprise a thrashing, muddy, angry, joyful, and howling slurry, as if the instruments were in the thralls of a cathartic musical bender. Above it all, Anderson’s simply written lyrics map out tart terrain—anyone who has experienced the throes of love in all of its messy stages will recognize themselves in his words.
Anderson, who is originally from Wisconsin, launched his music career 10 years ago with the Canadian noise-pop band, Weed, before eventually launching Hotline TNT in 2021 with the project’s debut, Nineteen in Love. Anderson traversed music scenes from coast to coast—New York and North Carolina, Wisconsin and neighboring Minnesota, Vancouver and Seattle—and his DIY dedication helped grow Hotline TNT’s audience until the band caught the attention of Jack White’s Third Man Records. Thanks in part to the label’s support, Cartwheel transcends the band’s 2021 introduction, infusing more engaging, heartfelt melodies without losing any of the band’s trademark grinding urgency.
Hotline TNT - "Protocol"
Inspired by his older brother’s jazz band, Anderson started playing bass towards the end of his time in the fifth grade. Within a few years, he’d picked up the guitar, and by high school, he was playing in cover bands with his brother. His college years marked his first attempts at songwriting, a process which, for Anderson, starts with chords and melodies, then lyrics.
Up until signing with Third Man, Anderson had been supplementing his music work with substitute teaching at a public high school in New York City. One of his colleagues had been in the Scottish rock band Teenage Fanclub, and, knowing the difficulty of being a working musician, covered for Anderson at some points so he could work on Hotline TNT matters.
“Whenever I hold a pick, my wrist gets really tight, and I just think, ‘no.’” —Will Anderson
Garner, meanwhile, started playing guitar in middle school in Louisiana. Her dad’s favorite band was the Smiths, which imprinted heavily on her while growing up. But these days, she’s reaching for Neil Young and Crazy Horse, ’90s material like Red House Painters, or ’80s pop band Beat Happening—one of Kurt Cobain’s favorites, Garner notes, and “a band who every person who picks up the guitar should listen to.” (Her other band, in fact, is named Touch Girl Apple Blossom, inspired by lyrics from the Beat Happening track “Indian Summer.”) It’s a mix that makes sense for Hotline TNT’s woolly, melodic maelstrom.
Hotline TNT's Gear
Anderson and Garner aren’t very particular about their gear—Anderson didn’t know what an amp head was until a few years ago—but they favor the fuzzy balance between a Pro Co RAT and an EHX Big Muff.
Photo by Wes Knoll
Guitars
- Yamaha SG-3
- 1996 MIJ Fender Telecaster with Lollar pickups
- 2014 MIM Fender Strat with Lollar pickups
Amps
- Randall RX120RH
Effects
- Pro Co RAT
- EHX Big Muff Pi
Strings
- Ernie Ball Super Slinky Nickel Wound (.009–.042)
Garner now lives in Austin, where Hotline TNT played at SXSW this year. “Will and I run around in similar circles of music,” she says, “so when Hotline TNT was looking for a guitar player, I came to New York and rehearsed with them. It was a good fit, so I joined. It’s been a wild ride.”
Garner acquired her main guitar—a natural finish, short-scale Peavey T-30—from a former bandmate in an upgrade from her previous Squier. “It’s my baby,” she says. “What I like about it is that it’s really lightweight, so no back problems, and I appreciate the short scale.”
“Despite the fact that this particular guitar has been with me for so long, I’m actually not that precious with it.” —Will Anderson
Anderson’s primary guitar is a vintage Japanese-made Yamaha SG-3 that he bought in Vancouver when he was 19. “These days, Yamaha SG-3s go for $2,500 in the high range, but I bought my guitar for about $788 in Vancouver from a music store called Not Just Another Music Shop,” he says. “At the time, I just thought it looked cool. Because I couldn’t afford to buy it outright, I made payments on it all summer long before I could take it home.” Anderson’s SG-3-driven leads on Cartwheel, by the way, are all straight from his fingers. “I do not play with a pick—never have,” he notes. “I get a lot of comments about this at shows. Whenever I hold a pick, my wrist gets really tight, and I just think, ‘no.’”
All three Hotline TNT guitarists, Will Anderson, Olivia Garner, and Matt Berry, come together on Cartwheel to create an entrancing blend of textural distortion under Anderson’s romance-inspired lyrics.
Despite his allegiance to his Yamaha, Anderson admits that he’s actually not all that sentimental about the instrument. The thing he loves best about the SG-3 doesn’t have to do with tone or playability—it’s that it still performs after years of abuse. “Despite the fact that this particular guitar has been with me for so long, I’m actually not that precious with it,” he says. “If something happened to it, I’d be sad, sure, but I’d also think, ‘Alright, it’s time to find a new one.’”
Still, when it comes to travel, Anderson doesn’t take many chances with his guitar. “Overseas, I usually put my guitar on a gig bag that I carry on my back when I board the plane,” he says. “I pretty much talk my way into things and out of things when it comes to dealing with travel.”
“I pretty much talk my way into things and out of things when it comes to dealing with travel.” —Will Anderson
Anderson’s love for his main axe is about as far as his gear passion goes. Though he feels an increasing sense of responsibility to improve his gear knowledge base, he confesses to being happily clueless. A few years back, he bought a solid-state Randall half-stack, which is still his go-to amp, and it provided an unexpected learning experience. “To show you how little I know about gear, two or three years ago somebody said to me, ‘Can I borrow your amp head for our set?’ I was like, ‘You can. Is it onstage now? Because I don’t know. What is that thing?’ I didn’t know what a head was until recently.”
While Anderson plucks out finer lead parts, Garner says her role is to create a “giant wall of sound” with open chords and thick distortion.
Photo by Jade Amey
Effects-wise, Anderson and Garner strike a warm balance between a Pro Co RAT, a Boss DS-1, and a Big Muff Pi that Anderson bought in high school. The interplay between the three is all over Cartwheel, but is especially prominent on “Protocol” and “BMX,” which both utilize the pedals’ respective distortions as percussive and resonant elements. The blend creates a sort of halo: It extends outward like its own multi-layered cloud strata, enveloping the lyrics in “I Thought You’d Change,” and creating an uplifting effect that counters the descending melodies in “Stump” and “Son in Law.”
The goal, says Garner, is to create “a giant wall of sound with big, giant chords.” “I hold down the big chords while Will will do his leads,” she says. One of Anderson’s oldest friends, Matt Berry, recently joined the band, completing a triple-guitar threat. (Berry serves as de facto guitar tech for the band, even changing Anderson’s strings.)
“I pretty much talk my way into things and out of things when it comes to dealing with travel.” —Will Anderson
Hotline TNT isn’t Anderson’s only outlet. He’s morphed his extracurricular interests into a hydra-esque presence online, which includes hosting both a Twitch stream and an Instagram talk show, and publishing a basketball zine. “It’s all about feeding the same vision and aesthetic,” says Anderson. “People seem to be rocking with it, so that’s cool.”
Will Anderson was teaching at a New York high school before Jack White’s Third Man Records signed Hotline TNT.
Photo by Jade Amey
But his other endeavors might have to be set on the backburner this year, as Hotline TNT’s stock is rising. They spent much of 2023 on the road, but this time out, they had a better van and sleeping accommodations. Even if they didn’t, though, Anderson wouldn’t mind. Touring feels like home—especially if he gets to see the midwest in the fall. Early this year, Hotline TNT is ripping through mainland Europe—including Italy, France, and Germany—and later, they’ll hit Japan, a personal highlight for Anderson. In line with their laissez-faire approach to gear, Anderson says they plan to leave their gear at home, and pick up fill-ins overseas to make sure they don’t run into international voltage variance issues.
Anderson currently has six demos in the hopper toward his next album. Usually, he says he’d already have another record ready to go, but Hotline TNT’s explosion in popularity has kept them busy on the road, and working with Third Man has flooded the band with exciting opportunities. But Anderson does have a shortlist of people to work with for the next release, and a rough sketch of the collection’s themes: relationships, heartbreak, and family.
But don’t expect to learn what the band’s name means any time soon. “It does stand for something, but I cannot reveal publicly what it is because me and the original members of the band from four years ago came up with it,” says Anderson. “It’s our sacred vow to keep that a secret.”
YouTube It
Bathe in colored stage lights and sweet, thick distortion with Hotline TNT’s live performance in Toronto in March 2023.
The Rickenbacker 481’s body style was based on the 4001 bass, popularly played by Paul McCartney. Even with that, the guitar was too experimental to reach its full potential.
The body style may have evoked McCartney, but this ahead-of-its-time experiment was a different beast altogether.
In the early days of Beatlemania, John Lennon andGeorge Harrison made stars out of their Rickenbacker guitars: John’s 325, which he acquired in 1960 and used throughout their rise, and George’s 360/12, which brought its inimitable sound to “A Hard Day’s Night” and other early classics.
By the early 1970s, the great interest the lads had sparked in 6- and 12-string Ricks had waned. But thankfully for the company, there was still high demand for yet another Beatles-played instrument: the 4001 bass.
Paul McCartney was gifted a 4001 by Rickenbacker in 1965, which he then used prominently throughout the group’s late-’60s recordings and while leading Wings all through the ’70s. Other rising stars of rock also donned 4000 series models, like Yes’Chris Squire, Pink Floyd’sRoger Waters, the Bee Gees’ Maurice Gibb, Creedence Clearwater Revival’s Stu Cook, and more.
And like that, a new star was born.
So, what’s a guitar company to do when its basses are selling better than its guitars? Voilà: The Rickenbacker 480. Introduced in 1972, it took the 4000-series body shape and created a standard 6-string out of it, using a bolt-on neck for the first time in the brand’s history.
The 481’s slanted frets predate the modern multi-scale phenomenon by decades. The eight-degree tilt of the frets is matched by an eight-degree tilt of the nut, pickups, and bridge.
“It was like a yo-yo at Rickenbacker sometimes,” factory manager Dick Burke says in Rickenbacker Guitars: Out of the Frying Pan Into the Fireglo. “We got quiet in the late ’60s, but when the bass started taking off in the ’70s, we got real busy again, so making a 6-string version of that was logical, I guess.”
The gambit worked, for a time. Sales of the 480 were strong enough at first that, in 1973, a deluxe model was introduced—the 481—and it’s one of these deluxe versions that we’re showcasing here.
“The 481 features slant frets—pointing ever-so-slightly toward the body of the guitar—and the eight-degree tilt of the frets is matched by an eight-degree tilt of the nut, pickups, and bridge.”
Take a close look and you’ll notice that the body shape isn’t the only remarkable feature. The 481 was Rickenbacker’s first production run to feature humbucker pickups. Here, you can see each humbucker’s 12 pole pieces dotting through the chrome cover, a variant casing only available from 1975 to 1976. (Interestingly enough, the pickups had first been developed for the 490, a prototype that never made it to public release, which would’ve allowed players to substitute different pickups by swapping loaded pickguards in and out of the body.)
The new pickups were also treated with novel electronics. The standard 3-way pickup-selector switch is here, but so is a second small switch that reverses the pickups’ phase when engaged.
The inventive minds at Rickenbacker didn’t stop there: The 481 features slant frets—pointing ever-so-slightly toward the body of the guitar—and the eight-degree tilt of the frets is matched by an eight-degree tilt of the nut, pickups, and bridge.
Long before the fanned fret phenomenon caught on in the modern, progressive guitar landscape, Rickenbacker had been toying around with the slant-fret concept. Originally available from 1970 forward as a custom order on other models, slant frets were all but standard on the 481 (only a small minority of straight-fret 481s were built).
The 481 was the deluxe version of the 480, which preceded it and marked the first time the company used a bolt-on neck.
Dick Burke, speaking separately to writer Tony Bacon in an interview published on Reverb, only half-recalls the genesis and doesn’t remember them selling particularly well: “Some musicians said that’s the way when you hold the neck in your left hand—your hand is slanted. So, we put the slanted frets in a few guitars. I don’t know how many, maybe a hundred or two—I don’t recall.”
Even proponents of the 481 do not necessarily sing the praises of the slanted fretboard. Kasabian’s Serge Pizzorno, a 481 superfan, told Rickenbacker Guitars author Martin Kelly, “I don’t just love the 481, it’s part of me.... The 481’s slanted frets have made my fingers crooked for life, but I don’t care, I’ll take that for it’s given me riff after riff after riff."
Initial 480-series sales were promising, but the models never really took off. Though they were built as late as 1984, the slant-fret experiment of the 481 was called off by 1979. And these slanted models have not, in the minds of most players or collectors, become anywhere near as sought-after as the classic 330s and 360s, or, for that matter, the 4001s.
For that reason, 481s—despite their novelty and their lists of firsts for Rickenbacker—can still be found for relatively cheap. Our Vintage Vault pick, which is being sold by the Leicester, England-based Jordan Guitars Ltd, has an asking price of 3,350 British pounds (or about 4,300 U.S. dollars), which is still well under half the going-rate of early 360s, 660s, and other more famous Ricks. Some lucky buyers have even found 481s on Reverb for less than $2,000, which is unheard of for other vintage models.
With its idiosyncratic charms, the 481 remains more within reach than many other guitars of a similar vintage.
Sources: Martin Kelly’s Rickenbacker Guitars: Out of the Frying Pan Into the Fireglo, Tony Bacon’s"Interview: Dick Burke on the Creation of the Rickenbacker 12-String | Bacon’s Archive" on Reverb, Reverb Price Guide sales data.
Bergantino revolutionizes the bass amp scene with the groundbreaking HP Ultra 2000 watts bass amplifier, unlocking unprecedented creative possibilities for artists to redefine the boundaries of sound.
Bergantino Audio Systems, renowned for its innovative and high-performance bass amplification, is proud to announce the release of the HP Ultra 2000W Bass Amplifier. Designed for the professional bassist seeking unparalleled power and tonal flexibility, the HP Ultra combines cutting-edge technology with the signature sound quality that Bergantino is known for.
Operating at 1000W with an 8-ohm load and 2000W with a 4-ohm load, the HPUltra offers exceptional headroom and output, ensuring a commanding presence on stage and in the studio. This powerhouse amplifier is engineered to deliver crystal-clear sound and deep, punchy bass with ease, making it the perfect choice for demanding performances across any genre.
The HP Ultra incorporates the same EQ and feature set as the acclaimedBergantino Forté HP series, offering advanced tonal control and versatility. It includes a highly responsive 4-band EQ, Bergantino’s signature Variable RatioCompressor, Lo-Pass, and Hi-Pass Filters, and a re-imagined firmware that’s optimally tuned for the HP Ultra’s power module. The intuitive user interface allows for quick adjustments and seamless integration with any rig, making it an ideal solution for both seasoned professionals and rising stars.
As compared to previous forte HP iterations (HP, HP2, HP2X), Ultra is truly its own amp. Its behavior, feel, and tonal capabilities will be well noted for bass players seeking the ultimate playing experience. If you’ve been wishing for that extreme lead sled-type heft/force and punch, along with a choice of modern or vintage voicings, on-board parallel compressor, overdrive; high pass and lowpass filters, and more—all in a 6.9 lb., 2ru (8” depth) package...the BergantinoHP Ultra is worth checking out.
Building on the forte’ HP2X’s leading edge platform (including a harmonic enriching output transformer (X) and 3.5db of additional dynamic headroom (2),the HP Ultra’s power focus is not about playing louder...it’s about the ability to play fuller and richer at similar or lower volumes. Many players will be able to achieve a very pleasing bass fill, with less volume, allowing the guitars and vocals to shine thru better in a dense mix. This in turn could easily contribute to a lower stage volume...win-win!
Key Features of the Bergantino HP Ultra 2000W Bass Amplifier:
- Power Output: 1000W @ 8ohms / 2000W @ 4ohms, 1200W RMS @2-Ohms (or 1700W RMS @2.67-Ohms-firmware optimizable via USB
- Dual Voicing Circuits: offer a choice between vintage warmth and modern clarity.
- Custom Cinemag Transformer: elevates harmonic enrichment to new heights
- Variable Low-Pass (VLPF) and Variable High-Pass (VHPF) filters, critical for precise tone shaping and taming of the most challenging gigging environments.
- 4-Band Tone Controls: Bass: +/-10db @40hz, Lo-Mid:+/-10db @250hz,Hi-Mid: +/-10db @ 1khz, Treble: +/-10db @ 3.5khz
- Punch Switch: +4db @110hz
- Bright Switch: +7db @7kHz or +6db @2khz – user selectable● Built-in parallel compression - VRC
- 3.5dB of additional dynamic headroom
- New Drive Circuit featuring our proprietary B.S.D (Bergantino SmartDrive) technology
- Auxiliary Input and Headphone Jack: for personal monitor and practice
- Rack Mountable with optional rack ears
- Effects send and return loop
- Studio quality Direct Output: software selectable Pre or Post EQ
- UPS – Universal power supply 115VAC – 240VAC 50/60Hz
- Weight: 6.9 pounds
- Dimensions: 13.25”W x 8.375”D x 3.75”H
- Street Price: $1895.00
For more information, please visit bergantino.com
The NEW Bergantino Forté HP ULTRA!!! - YouTube
Featuring a 25.5" scale length, mahogany body, gold hardware, and 490R/498T pickups. Stand out with the unique design and comfortable playing experience of the Gibson RD Custom.
Initially released in 1977, the Gibson RD model has been a cult classic for years. It is famous for its unique appearance, which takes inspiration from both the Gibson Explorer and Firebird designs, as well as its functionality and use by several popular guitarists across multiple genres.
Now, the iconic RD Custom joins the Gibson Custom core lineup for the first time. Not only is this the first Custom Shop-built RD model, but it is also the first 25.5” scale length solidbody core model offered by Gibson Custom. Complete with the classic and comfortable RD body shape, including a rear tummy cut for extra comfort, this model also features a mahogany body with multi-ply top binding, Gibson Custom aesthetics, including gold hardware and mother-of-pearl block inlays on the neck, and a mother-of-pearl Custom split diamond headstock inlay. The RD Custom also has a 25.5” scale mahogany neck with a Medium C profile and long neck tenon, a bound ebony fretboard with 22 medium jumbo frets, and a bound headstock with Grover Rotomatic tuners. The updated electronics include 490R and 498T pickups, CTS potentiometers, and a hand-wired harness.
The Gibson RD Custom is designed to help players stand out from the crowd with its longer scale length, curvaceously elegant body, and classic design. Now is your opportunity to experience the unique and comfortable playing experience of the cult-favorite Gibson RD Custom for yourself. A Custom Shop hardshell case is also included.
For more information, please visit gibson.com.
How do you add scores of effects to your pedalboard with a single stompbox?
Big library of effects. Great sounding delays and reverbs. Mature TonePrint library and interface is easy to use.
Can only use one effect at a time. An IR loader and a looper would be welcome additions
$129
TC Electronic Plethora X1
tcelectronic.com
I’m often seduced by convenient solutions when it comes to planning a pedalboard. Time spent arranging a select group of stomps can be a distraction, which is why I tend to stick to pedals that do one or two things well and keep the tinkering to a minimum. After spending time with TC Electronic’s new multi-effects unit, the Plethora X1, I’ve had to rethink how much a single pedal can bring to a pedal board, because the X1 can be many things.
Save for the creation of gain sounds, the Plethora X1 can fill almost any sonic need on any gig. It can play the role of just one effect at a time—this isn’t like the Plethora X3, Plethora X5, or a modeler within which you can create chains of virtual stomps. But with very little effort, I can access TC’s entire TonePrint line, including factory- and artist-created TonePrints from the Hall of Fame 2 Reverb, Flashback 2 Delay, Helix Phaser, Viscous Vibe, Sub ‘N’ Up Octaver, Brainwaves Pitch Shifter, Corona Chorus, Hypergravity Compressor, Mimiq Doubler, Vortex Flanger, Pipeline Tap Tremolo, Quintessence Harmony, Sentry Noise Gate, and Shaker Vibrato. At $129, the Plethora X1’s sounds-per-dollar value is extremely hard to beat.
Making Space
Full-sized Hall of Fame 2 and Flashback 2 pedals are already mainstays on my board, but, curiously, I hadn’t really explored the full capacity of those effects until using them within the X1. One reason, perhaps, is the X1’s handy readout. When you move any one of the three assignable knobs on the unit, the values for the assigned parameter appear on the screen, providing valuable visual feedback and precision. The parameters adjusted via those three knobs aren’t the only things you can tweak. The fourth knob is a rotary control with seven different slots that each store two different effects (when in A/B mode). That means 14 different presets that you can access quickly without having to dive into the deep editing mode.
Scratching the Surface
My favorite TC Electronic effects are the company’s detail-rich reverbs and delays. They did not disappoint here, and right out of the box, the room and shimmer reverbs were very inspiring. The shimmer verb didn’t have the way-too-glossy feel that can make many of these effects sound cheesy. A subtle, tight room reverb, meanwhile, allowed me to sense the effect as much as hear it—a nuance that, to me, is a hallmark of a well-designed algorithm.
Each effect is pre-loaded with a handful of presets that you can cycle through without firing up the app, offering many surprises in effects you may not have encountered before. The Sub ’N’ Up Octaver, for instance, is a real standout. It tracks incredibly well, offers plenty of customization, and sounds thick. Another highlight is the Helix Phaser, which is bubbly and liquid with an analog-like voice that would have appealed to Eddie Van Halen and Bob Marley alike.
There’s an App for That
Though the visual feedback from the X1’s screen is valuable, you have the most control and programming power within the TonePrint app. You can connect with the app three different ways: Bluetooth, USB-C, or using your phone to beam a preset via the pickups on your guitar. Although all three worked, I found Bluetooth and USB-C to be the most reliable and responsive.
As you can imagine, TC has built up a huge library of presets for all the various pedals represented in the X1. (The Tone Print Library has grown continuously since the technology was introduced in late 2010). But as sizable as the library is—and in spite of how many effects are on hand in the X1—the process of switching between them and trying new TonePrints out is still easy and fun. Once the pedal is connected, you scroll through a menu within the app of artist and factory presets. After you find one you like, you can either save it directly to your X1 or pull up the editor to adjust control parameters and other effect-specific functions. It’s an in-depth editor that doesn’t overload you with endless menus. TC deserves kudos for such an accessible design.
The Verdict
As you might guess, I don’t have the space to go in-depth on every effect in the X1. And at $129, the X1’s performance-to-price ratio is off the charts. Although you can only use one effect at a time, the ability to bring in any one of 14 great-sounding effects in a pinch is invaluable. I’ve often wrestled with whether or not to fork out money for a chorus, tremolo, or harmonizer that I might only use one or twice during a gig. That’s a decision the Plethora X1 all but eliminates. Although there’s a minimal learning curve, the X1 doesn’t have the paralyzing effect that other multi-effects units can have. If you’re into streamlining your board but still yearn to try new effects and applications as top artists hear and envision them, the X1 is hard to beat. PG