The self-described “utility knife” played drums with John Scofield and Marcus Miller and spent time in the studio with Q-Tip before landing on Stephen Colbert’s show as a multi-instrumentalist member of the house band. Now, he’s taken over as the show’s guitar-wielding bandleader and is making his mark.
It’s a classic old-school-show-biz move: Bring out the band, introduce them one by one, and build up the song to its explosive beginning. It’s fun, dramatic, audiences love it, and that’s how every The Late Show with Stephen Colbert taping starts.
By this time, us audience members have been sitting in Manhattan’s chilly Ed Sullivan Theater for about 90 minutes. We’ve gotten our seats, had a bathroom break after getting settled, and had some fun with warm-up comic Paul Mecurio. The first musician summoned by announcer Jen Spyra is drummer Joe Saylor. Wearing his trademark cowboy hat, he jogs out, gets behind the kit, and kicks off an up-tempo second-line groove. Next comes upright bassist Endea Owens and percussionist Nêgah Santos. The band’s trumpeter, Jon Lampley, is introduced, and he’s brought along his bandmates in the Huntertones as guests, so saxophonist Dan White and trombonist Chris Ott come out as well.
Louis Cato feat. Stay Human "Look Within"
The multitalented Louis Cato leads the Stay Human band through a special rooftop performance of his song “Look Within,” from his album, Starting Now.
The audience is now on its feet, the band’s pocket is thick, and the energy is building. When bandleader Louis Cato charges onstage, he reaches his mic on the bandstand and shouts, “I feel good today!” with explosive enthusiasm and a big grin, and the band launches into Jon Batiste’s “I’m from Kenner.” Cato sings the catchy and gleeful refrain: “I feel good, I feel free, I feel fine just being me / I feel good today.” And the audience is feeling the love. Almost everyone is bouncing and clapping along.
A couple minutes in, when it seems like the song has reached its super-positive-vibe, high-energy climax, Cato shouts into his mic, “How do you feel today, Stephen?” And with that, Colbert comes running out from the middle of the set. Cato leaps from the bandstand toward the host as the crowd explodes. The two grab hold of each other and attempt to spin around, but the bandleader, holding his black-sparkle Tuttle T-style, loses his grip and goes sliding across the shiny stage. There’s a second where both are comically stunned—Kevin McCallister Home Alone-expressions on both of their faces—but Cato quickly jumps to his feet, both he and his guitar unharmed, and runs back to the bandstand, where he keeps the song moving along with his bandmates, who haven’t missed a beat.
All this excitement isn’t even for the TV audience! Colbert is coming out for the un-televised pre-show Q&A. In a few minutes, they’ll do a new taped intro that looks more like what we see every night. But they’ve gotten the crowd energized, and we need to keep it up. They need our energy to do their jobs.
The Late Show Band welcomes a lot of guests up on the bandstand. Here, Cato and Joe Walsh boogie down.
Photo by Scott Kowalchyk
As Cato sees it, that’s what his role as bandleader is all about: keeping the audience engaged and amplifying the drama and action of the show. “That translates to the energy that the viewers get at home,” he explains. “For all of us here, we’re able to feed off that energy and do the best possible show that we all can.”
Colbert agrees with that job description and adds that the bandleader himself has the same contagious effect on his players. “Louis is an extraordinarily gifted multi-instrumentalist,” he says, “whose spirit of creativity and collaboration not only elevates everything the band does musically but inspires me to be better at my job.” He adds, “I’m so happy to call him my friend.”
Beyond his infectious energy and charisma, there are a lot of ways Cato keeps the Late Show Band invigorated from night to night. For one, he keeps the music fresh by tackling a new cover song every day. That doesn’t mean running down rote note-for-note charts. Cato and the band take a reconstructionist approach that fans of his work—whether from his collaborations with artists such as the Huntertones, Scary Pockets, or Vulfpeck, or from his regular Instagram cover-song posts—will recognize.
“Louis is an extraordinarily gifted multi-instrumentalist whose spirit of creativity and collaboration not only elevates everything the band does musically but inspires me to be better at my job.”—Stephen Colbert
On this evening, the band runs through a host of multi-genre reinterpretations during the two-episode taping, including a slow-burning and soulful “Smokestack Lightning,” a New Orleans-style “Down by the Riverside,” and a fingerpicked, acoustic-led take of Joni Mitchell’s “Free Man in Paris” that gets Colbert lip syncing along off camera. On a horn-driven arrangement of Stevie Wonder’s “Love’s in Need of Love Today,” there’s a re-worked bridge that creates a generous feature spot for the guest horn players.
Every arrangement brings a new and unique perspective to a classic track, to ensure the band is “not just a wedding band doing a cover of a song on the radio.” Cato adds, “We’re arranging it and making it our own—because that’s the sonic fingerprint of our show.”
St. Vincent jams with Louis and crew.
Photo by Scott Kowalchyk
A Lifelong Path
Listening to the story of Cato’s musical life, it seems that this job—with its demand for a blend of careful strategizing and on-the-fly creative thinking, as well as effortless instrumental skills and charismatic showmanship—is what he’s been training for since the beginning.
On the morning of the taping I attended, I meet Cato in his dressing room. Painted with sky-blue walls and a cloud mural on the ceiling, it’s a comfortable place to hang. The bandleader is wearing slim-fit floral pants, a hoodie over a black T-shirt, and a long necklace. He sits across from me on his couch, next to a guitar stand that holds a few instruments—including his Tuttle, a Jesse Stern-built baritone acoustic, and his Univox LP-style—and a ’65 Deluxe Reverb reissue with a Universal Audio Dream ’65 pedal plugged into it.
“There’s not a time in my brain when I was not making music in some way or form,” Cato says. His mother, a pianist in the Church of God in Christ, bought her son a Diamond drum kit that he recalls having paper heads when he was just 2 years old, and she started teaching the toddler to accompany her. “I marvel at my mom,” he laughs. “Like, who buys their 2-year-old a drum kit?” After playing those drums every day for a year, he started accompanying her at services.
The family moved around a lot. Cato’s father was in the Air Force, and Louis was born on a base in Lisbon, Portugal, before moving to Dayton, Ohio. Not long after he started playing in church there, they moved again to Washington, D.C., and when Louis was 5 they settled in Albemarle, North Carolina. A few years later, Louis started playing guitar on a “little burgundy sunburst acoustic. Eventually, I busted a string and busted another string and just kept playing with four strings. I delved more into bass from playing bass lines on the acoustic guitar. So, for my 9th birthday, my dad bought me a 4-string bass.”
“I’d show up to Tip’s and we’d do a week of writing sessions with John Legend or have André 3000 in the studio for a couple of weeks.”
While it was strictly pragmatic reasons that initially drew him to the bass, he says his biggest inspiration was the bass player he knew best: his mother’s left hand. Her playing, rooted in the COGIC (Church of God in Christ) style, “involves heavy left-hand bass. I wasn’t as psyched to play bass in church since the way my mom plays is very defined. But eventually I kind of had to learn how she plays. It was always just her and me playing. And I had to learn to move with that and follow that. She’s a great bass player.”
Along the way, Cato picked up more instruments. By the time he headed to Berklee, he was playing drums, guitar, and bass as well as tuba, trombone, and euphonium. “I was going from being a big fish in a small pond to a small fish in a large pond of super-talented people who had heard oodles of music I had never dreamed of,” he recalls. So, he decided to focus his studies on the instrument he’d played the longest.
Louis Cato's Gear
A glimpse at Cato’s pedals and amp, which mostly live outside of the camera’s eye, behind his stage monitor.
Guitars
- Univox LP-style
- Tuttle Custom Hollow T
- 1961 Gibson SG reissue
- Martin OM-28
Amps
- ’65 Fender Princeton Reverb reissue
Effects
- Boss FV-500H Volume Pedal
- Boss TU-3 Chromatic Tuner
- Dunlop Cry Baby
- 3 Leaf Audio Octabvre
- J. Rockett Archer
- Truetone Jekyll & Hyde
- Xotic RC Booster
- MXR Carbon Copy
Strings and Picks
- D’Addario EJ16 (.012-.053)
- D’Addario EXL110 (.010-.046)
- Dunlop Max Grip .88 mm
Cato completed just two semesters—fall ’03 and spring ’04—before deciding to concentrate on playing the gigs that were paying his bills. “My rationale was, much to my parents’ chagrin, here’s an opportunity where I can keep learning on the job and be working my way out of the debt I went into in this year.”
Gigging with wedding and church bands gave the multi-instrumentalist an opportunity to keep all his instrumental and vocal skills alive. “My oldest daughter was born soon after that,” he recalls, “so I felt really, really aware of how lucky I was, how lucky any of us are, to make a living and support a family as a musician.” Cato spent five years in Boston, playing various instruments in gigging bands, and he frequented local institution Wally’s Cafe Jazz Club, just two blocks down the street from Berklee, “for self-education and inspiration. When that felt like I hit a ceiling, I looked at where I could go to continue my inspiration and working on the kind of projects I wanted to be working on, and that led me here.”
By that time, Cato’s friend Meghan Stabile, had moved to New York and created the promotion and production company Revive Music, which was dedicated to the kinds of jazz and hip-hop collaborations he wanted to pursue. Cato moved to Bushwick, Brooklyn, with his band Six Figures— “There were six of us; we did not make six figures!”—and would head back to Boston each weekend for the gigs that were paying his bills. Eager to soak up the New York scene, he’d return to New York on Sunday nights and go directly to jam sessions.
All that time back and forth on the Northeast Corridor paid off. A self-described musical “utility knife,” Cato’s multi-instrumentalism, as well as his talents as a songwriter, arranger, producer, and engineer, made him a major asset as a collaborator, and the New York scene took notice. Soon, he established essential connections that would affect his career, forming “an instantaneous brotherhood that continues to this day” with producer Kamaal Fareed, aka Q-Tip. “Through that, I ended up really delving into a lot of relationships and credits.”
The two artists worked on high-level collaborations that not only bolstered Cato’s reputation but served as a major piece of his education. “I’d show up to Tip’s,” he explains, “and we’d do a week of writing sessions with John Legend or have André 3000 in the studio for a couple of weeks. Sometimes things would come from it, and sometimes nothing would come from it. But being in the creative process on that level in a trusted space was invaluable for me. I learned so much.”
Outside of Q-Tip’s studio, Cato was learning from plenty of masters, mostly from behind the kit. “It’s really special when you find yourself learning things you connect to,” he says about his work alongside artists such as bassist Marcus Miller, keyboardist George Duke, and guitarist John Scofield. “And I learned so much about myself from connecting to some of these people.”
Staying Human
Back in 2015, Cato received a phone call from pianist Jon Batiste. The two had never met, but Batiste rang him up about a mysterious project—a theme song for a TV show that he couldn’t disclose. “I had a wisdom tooth appointment back in Boston, and I got a random call,” Cato remembers. “I think his exact words were, ‘I’d love to have your ears on it.’ And I followed my gut, rescheduled my trip, stayed in New York an extra day with an abscessed wisdom tooth.”
The two got together to co-write and produce “Humanism,” which would become the theme song for the Stephen Colbert-hosted Late Show. Batiste played piano, Cato played the guitar, bass, and drum parts and “put on my editing hat.” They brought in Joe Saylor—who would become the show’s drummer—to play tambourine, as well as saxophonist Eddie Barbash. “After the session,” Cato remembers, “I went back, got my wisdom tooth out, and went back on the road with John Scofield.”
Three of the four go-to guitars Cato uses on The Late Show: a black Tuttle T-style, a cherry-red Gibson SG, and a Martin OM-28.
At first, Cato played the multi-instrumental role of his dreams, attempting to surround himself with every instrument he could play. “That lasted about three days before reality set in,” he laughs. “Slowly, one by one, things started disappearing—a floor tom going away here, a Pro Tools setup going offstage there. Eventually, as the band formed out, I moved around to what was needed. I was the utility guy—played a lot of kazoo, a lot of cowbell.”
While on the road drumming with Sco’, Cato got the invite from Batiste to join the show’s band, Stay Human. “It was a huge life shift for me,” Cato explains. “I was making really good money on the road with really good musicians, which was really fulfilling. And I took a chance. I loved the idea of being a part of something creatively from its inception.”
Eventually, Cato settled into a more consistent electric bass role, until Batiste brought in upright player Endea Owens, and he moved to guitar, where he’s mostly stayed. When Batiste left the show last year, Cato took over as bandleader—officially starting this season, back in September—and decided he’d lead from his role as guitarist. “Of all the places I occupied,” he says, “guitar was the easiest and most natural to me to lead the band, in the energy. From behind the drums, it’s a different thing, and we’ve done it when Joe was out. But it just was a really natural progression.”
Same Show, New Job
In just a few months, Cato’s new role as bandleader has had an impact on the show. The renamed Late Show Band’s engine seems to be burning on a new kind of fuel. And it feels as though that energy is coming directly from Cato.
When we talk, the guitarist is deeply engaged, in a kind of hyper-focused way that is not intense but more casually un-distractable. He brings that same focus to the show. While Colbert delivers monologues, Cato is zoomed in on the host, listening to every word, often riffing around on his guitar to contribute musical commentary. During interviews, he’s taking cues and following the tone of the conversation, looking for ways to adapt.
The bandleader gig requires loads of big-picture improvisation, but also lots of prep. Cato explains that each week he makes a set list, but the band will react and make changes in the moment. “My job ends up being a lot of judgement calls that affect the flow of the show,” he says. “We have a group of compositions we wrote for the show that can complement different moments. If there’s a major energy shift in an interview that takes a turn or something happens in the day, like a tragedy, we’ll call one of the songs we wrote for the show for a moment such as that. Recently, we had a guest on that started improvising a song. So, I have on our in-ear mic and call out the key and start playing, and we all jump in, and now we’re doing this instead.”
Cato poses with his black-sparkle chambered T-style, made by Tuttle. “When I’m checking off core priorities in sound,” he says, “if I’m going for rhythmic things, I go to the Tele.”
Photo by Scott Kowalchyk
Watching the Late Show Band in person, I see this play out as Treasury Secretary Janet Yellen explains the steps the U.S. can take to avoid a recession. It’s a heavy and heady conversation, and, frankly, it’s anything but fun. Cato knows he’ll need to pick the audience back up. As he watches from the bandstand, he gives tempo cues to the band, who nod along, so they can effectively shift the energy and get the audience re-focused for the next guest, actor/director Sarah Polley.
As a guitar player, Cato says he sticks to playing things that feel most natural to him so he can concentrate on his bandleading duties. He adds that he considers himself more a rhythm guitarist than a lead guitarist. (It’s worth noting that his delineation is more conceptual than musical: Cato is an inspired and dynamic melodic lead player, but his deeply rooted phrasing and feel is at the forefront of everything he plays, so the rhythm-first thing applies to it all.) “This is not a space as a guitar player where I’m jumping out of the box trying any and everything and exploring,” he explains. “You get to some of those places. But for me, it always has to start from something I can do while leading the band and reading the energy and making judgement calls.”
“We’re arranging it and making it our own—because that’s the sonic fingerprint of our show.”
That rooted, pragmatic ethos applies to the gear he chooses as well. “I never was a big gear person,” he admits. Luckily, he has Late Show Band tech and informed gearhead Matt Mead to help him keep his pedalboard well-stocked. “There’s so many things I’m learning about the job and trying to keep straight in my head that this ends up getting the short end of the stick, and it wouldn’t work if there was not a Matt Mead to make up the rest of that stick and make it sound good.”
“The show throws a lot of curveballs,” Mead points out. “He steers the boat as far as the tones he’s looking for and if there’s a particular sound he’s looking for. Sometimes, I’ll recommend stuff and say, ‘Hey I notice you’re doing this, maybe we should try this.’”
Cato’s collaboratively curated pedalboard is pretty simple at its core: It starts with a Boss FV-500H volume pedal, a Boss TU-3, a Dunlop Cry Baby, and 3 Leaf Audio Octabvre. Cato shows me how he uses the latter for more traditional, Hendrix-style playing, but he points out that the band plays a lot of montunoes, and he tends to use the octave pedal for those. For drive, he uses a J. Rockett Archer and a Truetone Jekyll & Hyde, which are followed by an Xotic RC Booster and an MXR Carbon Copy, all into a Fender ’65 Princeton Reverb reissue, and powered by a Voodoo Labs Pedal Power Plus.
In live performances outside of The Late Show, Cato uses various guitars, but says that the studio’s cold temperature doesn’t do many favors for instruments such as his Gibson Luther Dickinson ES-335 or some of his acoustics, so he’s careful when selecting which guitars come on stage at the Ed Sullivan Theater. The three guitars that most commonly appear on the show are his black Tuttle Custom Hollow T, a cherry red Gibson SG 1961 Reissue, and a Martin OM-28.
Another guitar that sometimes appears on the Late Show is his LP-style Univox, which I ask Cato about in his dressing room. “If I need to be altogether comfortable,” he explains, “I pull out the Univox, because it’s my earliest guitar. I’ve had this since high school.”
Cory Wong "Lunchtime" - The Late Show's Commercial Breakdown
When musical guests visit The Late Show, they get the full-band treatment from Cato and company. Here, Cory Wong sits in for a rhythm guitar showdown of the highest level.
Back when he first got the guitar, Cato remembers, it was in rough shape, desperately in need of wiring and pickup repairs and a new set of tuners. It stayed that way until he was in Boston. When he picked up a wedding band gig playing trombone and guitar, he was lucky enough to have a roommate who could get the Univox performance-ready by replacing the original tuners with locking units, cleaning out the electronics, and swapping the pickups for a pair of Seymour Duncans.
“I didn’t even know there was a such thing as a professional musician.”
But Cato says that even before those repairs, he’s always “loved it because it’s all I had. I remember I was playing a little Vox amp, and this guitar had a feeling out of that amp. This guitar just became home base and felt super natural to my fingers. If I need to just not be thinking at all, this is home.”
Did he ever dream he’d be on television every night, holding this Univox and chumming with a late-night host? “Never! Not once!” he says. “It was just a product of my nurture growing up in a small town. I didn’t even know there was such a thing as a professional musician.” And yet, Cato pursued music as fully and single-mindedly as he could. “I just knew that I liked it and felt connected to it.”
The Signature Jack White Collection features the Jack White Pano Verb amp, Jack White TripleCaster Telecaster and the Jack White TripleSonic Acoustasonic guitar.
Commenting on his Signature Collection with Fender, Jack White said: “We found the best of the old, with the best of the new and mixed innovation with the history of Fender to do something that we think Leo Fender would have been very proud of if he was alive today.”
The Signature Jack White Collection introduces a carefully produced selection of guitars and an amplifier that embody White's unique vision and Fender's commitment to craftsmanship. The Collection includes:
- The Fender Jack White Pano Verb Amplifier ($2,999 USD) Influenced by Jack White’s vintage Vibrasonic and Vibroverb amps and crafted in Corona, CA, the Pano Verb offers enhanced stereo reverb and tremolo effects with a unique 15” and 10” speaker combination, providing guitarists with a powerful tool for stage and studio settings.
- The Fender Jack White TripleCaster Telecaster ($2,999 USD) features a sleek Piano Black finish complemented by white powder-coated hardware, equipped with a Bigsby Vibrato, a custom pickup set featuring a Jack White Humbucker, Jack White JW-90 single-coil, and Jack White CuNiFe Wide-Range Humbucker, a Hipshot Xtender DropTuner, a Killswitch, and a distinctive banjo-style armrest.
- The Fender Jack White TripleSonic Acoustasonic ($2,499 USD) - Satin Black top finish paired with a Satin Actric White painted body and neck, boasting a unique Soft “V” Neck Shape and Pickguard Shape, equipped with streamlined 3-way switch voicings curated by Jack.
"We're beyond thrilled to announce the release of the Fender Jack White signature collection,” said Justin Norvell, EVP Product at FMIC. “Jack is regarded as a true visionary in the music world, and it has been an incredible journey working with him on developing these products. The guitars and amplifier reflect his innovative spirit and distinctive sound, and we can't wait for musicians everywhere to experience the unique blend of craftsmanship and creativity that they bring. This collection embodies the essence of what makes Jack White an icon, and we're proud to bring his vision to life for fans and musicians alike."
For more, visit www.fender.com.
The two pedals mark the debut of the company’s new Street Series, aimed at bringing boutique tone to the gigging musician at affordable prices.
The Phat Machine
The Phat Machine is designed to deliver the tone and responsiveness of a vintage germanium fuzz with improved temperature stability with no weird powering issues. Loaded with both a germanium and a silicon transistor, the Phat Machine offers the warmth and cleanup of a germanium fuzz but with the bite of a silicon pedal. It utilizes classic Volume and Fuzz control knobs, as well as a four-position Thickness control to dial-in any guitar and amp combo. Also included is a Bias trim pot and a Kill switch that allows battery lovers to shut off the battery without pulling the input cord.
Silk Worm Deluxe Overdrive
The Silk Worm Deluxe -- along with its standard Volume/Gain/Tone controls -- has a Bottom trim pot to dial in "just the right amount of thud with no mud at all: it’s felt more than heard." It also offers a Studio/Stage diode switch that allows you to select three levels of compression.
Both pedals offer the following features:
- 9-volt operation via standard DC external supply or internal battery compartment
- True bypass switching with LED indicator
- Pedalboard-friendly top mount jacks
- Rugged, tour-ready construction and super durable powder coated finish
- Made in the USA
Static Effectors’ Street Series pedals carry a street price of $149 each. They are available at select retailers and can also be purchased directly from the Static Effectors online store at www.staticeffectors.com.
Computerized processes have given repair techs the power to deliver you a better-playing guitar. But how do they work?
When we need to get our guitars fixed by a professional, a few nagging questions run through our heads: Will the repair specialist be thorough? Will their procedures ensure an optimal sounding and easy-to-play instrument, or will they merely perform cursory work to make the guitar somewhat playable without resolving underlying issues? Have they followed the tested advancements in understanding, tools, and techniques, or are they stuck in the ideas of the ’70s?
Presently, many certified guitar-repair specialists possess the expertise required to deliver an instrument that both sounds and plays wonderfully. The standards set by manufacturers and distributors have significantly risen, safeguarded by rigorous quality protocols to guarantee the best possible acoustic experience for customers. Additionally, lutherie training has raised the bar for critical processes, and one of the most tricky is fretwork.
Traditional fretwork once involved manual labor, with technicians utilizing sandbags or similar supports to steady the neck as they straightened it with a truss rod during the filing process. A notable advancement in this field came in the mid 1970s when Don Teeter, an author and repair expert, imposed a new method: fixing the guitar body to the bench and using blocks to maintain the neck in a playing position. This refinement was one of many in the continued quest to produce superior instruments by standardized methods.
An example of the Plek’s readings from an acoustic guitar.
Photo courtesy of Galloup Guitars
In the late 1970s, another pivotal innovation was introduced by Dan Erlewine. He created an advanced fret jig with a specialized body-holding system and neck supports, adding another layer of precision to the repair process. During my collaboration with Dan in 1985, we developed a rotating neck jig that counterbalanced the forces of gravity, keeping the instrument in its playing orientation while adjusting the neck supports. This step represented a significant leap in establishing control and standardization of fretwork procedures in our industry. By 1986, our approach had evolved into a freestanding workstation coupled with a sophisticated hold-down mechanism and enhanced neck supports, culminating in increased accuracy, efficiency, and consistency. Over the decades, the Erlewine/Galloup rotating neck jig has become a benchmark in numerous shops, enhancing fretwork performance.
"This step represented a significant leap in establishing control and standardization of fretwork procedures in our industry."
By the 1990s, automated and computerized technologies permeated the guitar manufacturing and repair sectors. Initially applied by import companies in the mass production of guitars, the technology, although expediting processes, did not immediately achieve high execution standards. However, the tech dramatically improved over time, with computer-driven systems eventually transforming the industry. Contemporary automated production utilizing such advancements meets exceedingly high standards of precision. Some bespoke guitar manufacturers, such as Steve Andersen, were pioneers in adopting these methods, but it was companies like Taylor that established them in the modern era.
Inevitably, the progression of technology extended beyond the mere production of parts. Around 1995, German engineer Gerd Anke envisioned the integration of computer-assisted technology into enhancing instrument playability, giving rise to Plek technology, which uses computers to precisely measure and analyze the various components of a guitar, like neck relief, fret height, nut and bridge specs, and more. Nashville guitar-repair tech Joe Glaser was among the first to recognize the machine’s value, followed by San Francisco luthier Gary Brawer. When Heritage Guitar Inc. invested in a Plek machine, the guitar industry could no longer disregard the significance of this innovation.
“The machine’s scanning data confirmed that there was one nature of an ideal fret plane, done by hand or machine, and unsurprisingly, it conformed exactly to what physics predicts, not personal mojo.”
In the spring of 2022, Galloup Guitars obtained its first Plek machine. Promptly, our technician Adam Winarski paved the way for the Plek’s integration in our shop. Now, it’s a rarity for an instrument to leave our shop without having undergone Plek analysis and machining. Impressed by the results of our integration, we created “Intro to Plek” as a course for all students enrolled at the Galloup School of Lutherie, offering our students a practical introduction to this technology. We furthered this educational initiative with a comprehensive one-week intensive “Plek Certification Training Course” for both students and the public. This advanced Plek course serves those seeking to boost their knowledge base and employability in this high-precision field.
Plek is rapidly becoming an industry standard for major manufacturers and smaller shops alike. However, this does not mean that those without access to this technology cannot execute proficient fretwork. Personally, I continue to use my Erlewine/Galloup neck jig—not only out of nostalgia, but also because it remains an excellent method for delivering accurate and reliable guitars. Still, it’s undeniable that the process of fretting, fret dressing, and analytics of fretted instruments has undergone significant transformation, resulting in better sounding—and playing—guitars. And ultimately, that’s what it’s all about.
Plenty of excellent musicians work day jobs to put food on the family table. So where do they go to meet their music community?
Being a full-time musician is a dream that rarely comes to pass. I’ve written about music-related jobs that keep you close to the action, and how more and more musicians are working in the music-gear industry, but that’s not for everyone. Casual players and weekend warriors love music as much as the hardcore guitarists who are bent on playing full time, but they may have obligations that require more consistent employment.
I know plenty of excellent musicians who work day jobs not to support their musical dreams, but to put food on the family table. They pay mortgages, put children through school, provide services, and contribute to their community. Music may not be their vocation, but it’s never far from their minds. So where do they go to meet their music community?
A good friend of mine has studied music extensively in L.A. and New York. He’s been mentored by the pros, and he takes his playing very seriously. Like many, he always had day jobs, often in educational situations. While pro gigs were sometimes disappointing, he found that he really enjoyed working with kids and eventually studied and achieved certification as an educator. To remain in touch with his love of music, he plays evenings and weekends with as many as three groups, including a jazz trio and a country band. Not actually worrying about having a music gig that could support him in totality has changed the way he views playing out and recording. He doesn’t have to take gigs that put him in stressful situations; he can pick and choose. He’s not fretting over “making it.” In some way, he’s actually doing what we all want, to play for the music plain and simple.
Another guy I know has played in bands since his teens. He’s toured regionally and made a few records. When the time came to raise a family, he took a corporate job that is as about as far away from the music business as you can get. But it has allowed him to remain active as a player, and he regularly releases albums he records in his home studio. His longstanding presence in the music scene keeps him in touch with some famous musicians who guest on his recordings. He’s all about music head to toe, and when he retires, I’m certain he’ll keep on playing.
“Seek out music people regularly. They’re hiding in plain sight: at work, at the park, in the grocery store. They sell you insurance, they clean your teeth.”
I could go on, and I’m sure you know people in similar situations. Maybe this even describes you. So where do we all find our musical compadres? For me, and the people I’ve mentioned, our history playing in bands and gigging while young has kept us in touch with others of the same ilk, or with those who are full-time musicians. But many come to music later in life as well. How do they find community?
Somehow, we manage to find our tribe. It could be at work or a coffee shop. Some clubs still have an open mic night that isn’t trying to be a conveyor belt to commercial success. Guitarists always go up to the stage between changes to talk shop, which can lead to more connections. I like the idea of the old-school music store. Local guitar shops and music stores are great places to meet other musicians. Many have bulletin boards where you can post or find ads looking for bandmates. When I see someone wearing a band T-shirt, I usually ask if they’re a musician. Those conversations often lead to more connections down the line. Remember, building a network of musicians often requires persistence and putting yourself out there. Don’t be afraid to initiate conversations and express your interest in collaborating with others.
Of course, I’m lucky to have worked in the music sphere since I was a teen. My path led to using my knowledge of music and guitars to involve myself in so many adventures that I can hardly count them. Still, it’s the love of music at the root of everything I do, and it’s the people that make that possible. So whether you’re a pro or a beginner, seek out music people regularly. They’re hiding in plain sight: at work, at the park, in the grocery store. They sell you insurance, they clean your teeth. Maybe they’re your kid’s teacher. Musicians are everywhere, and that’s a good thing for all of us.