
Rob Ickes and Trey Hensley first connected in Nashville in 2013, after the two had individually established themselves as formidable players in the bluegrass scene.
The Nashville-based troubadours are paring country music down to its blues and bluegrass roots on Living In A Song—a deeply personal album rife with ace musicianship and earthy introspection.
Life on the road is, quite literally, a driving force in country music. From the baleful strains of Hank Williams’ classic “Lost Highway” to Willie Nelson’s perennially uplifting “On the Road Again,” the endless black ribbon has inspired more songs, with a wider range of moods and emotions than there are twists and turns on a Blue Ridge mountain switchback. So it was only fitting that when Rob Ickes and Trey Hensley started digging into ideas with Grammy-winning producer Brent Maher, they found themselves chasing a familiar theme.
“Three crappy gigs in Ohio had a lot to do with it,” Ickes recalls with a laugh as he recounts the story behind the title cut to Living In A Song, the duo’s fourth album together, and their second with Maher producing. “I remember I was sick that weekend, just wore out, and I was sleeping in the car between soundcheck and showtime. It was just a weird experience, and then a couple of weeks later, Trey started singing this song. In the end, I think it’s about persevering. It can suck out here, but this is what you do when you love something, you know?”
Rob Ickes & Trey Hensley - Thanks
To be sure, the journey to where they are now has covered a lot of miles. After moving cross-country from the Bay Area to Nashville in 1992, Ickes emerged as a fleet-fingered demon on the dobro, first as a founding member of bluegrass band Blue Highway, whose early albums were released on Dick Freeland’s Rebel Records, the original home of bluegrass heroes the Seldom Scene. (That band’s Mike Auldridge, a key influence and eventual collaborator with Ickes, is a dobro legend in his own right.) A long-time player of Tim Scheerhorn’s resonator guitars—with his Wechter Scheerhorn 6500 series signature model introduced in 2006—Ickes is renowned for his singularly wide range of expression on lap steel. Folding down-home blues, country, and jazz into his repertoire, he has shared the spotlight with such heavyweights as Merle Haggard, Earl Scruggs, Vince Gill, and Alison Krauss, to name just a few.
Rig Rundown: Rob Ickes & Trey Hensley
Full Rig Details: https://bit.ly/Ickes-HensleyRRSubscribe to PG's Channel: https://bit.ly/SubscribePGYouTubeClick here to check out their new album Living in ...In 2013, he connected with Hensley in Nashville. Then just 22, Hensley had already carved out his own path as a child prodigy, having made his Grand Ole Opry debut with Earl Scruggs himself at the tender young age of 11. Brandishing a stalwart ’54 Martin D-28, he’s a sterling and technically gifted flatpicker whose own contemporaries claim him as an influence, but one of his most endearing traits is undoubtedly his humility. Just ask him to tell the story of how he came to play at the Carter Family Fold for Johnny and June Carter Cash; he still sounds as bowled over by the experience as he must have been when he was a kid.
For Living In A Song, the picking duo worked with producer Brent Maher, with whom they collaborated on 2019’s World Full of Blues.
“Actually, I think we borrowed one of Johnny’s tube mics to record vocals this time,” Hensley says with a smile. In the same train of thought, he name-drops Luther Perkins, whose licks on Cash’s “Folsom Prison Blues” were an early inspiration, as well as Roy Nichols—the understated but precision flatpicker on Cash’s classic “Tennessee Flat Top Box,” and later known for his long and legendary stint with Merle Haggard’s band. When it comes to knowing his craft, Hensley is still just as much a student as he is an innovator of country, bluegrass, rockabilly, and good old-fashioned rock ’n’ roll.
All that experience came to bear on Living In A Song, which has its roots in the songwriting sessions that Ickes and Hensley took up in earnest with Brent Maher at his Blueroom Studios in Berry Hill, just outside of Nashville. “Mostly I come at it as a guitar player,” Hensley says with his usual modesty. “I’m a guitar player first, a singer way out in second somewhere, and a songwriter in distant third, you know? So from my perspective, here’s a guitar thing from me or Rob, and then all these cool melodies that Brent would just come up with, seemingly out of thin air. I mean, we wrote 30 songs or more, so that was a totally different experience, and I think that’s the overlying theme of this record. It’s just us being songwriters. That’s how this one is so much different.”
“I mean, we wrote 30 songs or more, so that was a totally different experience, and I think that’s the overlying theme of this record. It’s just us being songwriters.”—Trey Hensley
Maher has worked with all the major players—his biggest songwriting success was “Why Not Me” by the Judds, but he’s engineered and produced sessions with Willie Nelson, Kenny Rogers, Nickel Creek, Shelby Lynne and plenty more. “We had written with Brent a little bit before,” Ickes notes, referring to 2019’s World Full of Blues (which also features guest shots from Vince Gill and Taj Mahal), “but with this record, we definitely made a conscious decision to write most of it. Then when the pandemic came along, it was like okay, we’ve got a little bit more time now. And I wouldn’t say he taught us, but just by working with somebody like that, you learn a lot. I know Trey and I both gained a lot of confidence from the experience, because you just start with nothing, and then after a couple of hours, you’ve got something.”
Rob Ickes' Gear
Ickes has two resonator signature models: one from the Wechter Scheerhorn 6500 series and the other by Byrl Guitars.
Photo by Jim Summaria
Guitars
- Byrl Guitars Rob Ickes Signature Series resonator
- Byrl Guitars flamed-maple shallow-body resonator
- ’40s Oahu Tonemaster lap steel
- 1932 Rickenbacker Frying Pan
- Fishman Nashville Series Resonator Guitar pickups
Amps
- ’65 Fender Deluxe black-panel
Effects
- Fishman Spectrum DI box
Strings & Picks
- D’Addario Medium Bronze (.016–.056)
- BlueChip Reso thumb pick
- Cobalt BP gold-plated finger picks
The album jumps off with the title cut—a slow-building ode that quickly grows inspirational, channeling tastes of Kris Kristofferson and Beggars Banquet-era Rolling Stones. Playing Maher’s full-sounding ’80s Gibson J-200 acoustic (his main guitar throughout most of the album), Hensley captures the feeling of solitude from the first line: “Well, I’ve been on this highway for about eight hours now….” with Ickes following on one of several resonators made by Indiana-based luthier Byrl Murdock (who designed and debuted a signature model with Ickes just last year). When the rest of the band kicks in—Pete Wasner on keyboards, Mike Bub on bass, and John Alvey on drums—and Ickes proceeds to rip a lap-steel solo on a vintage Oahu Tonemaster running through Maher’s ’65 black-panel Fender Deluxe, it all becomes clear what they’re going for: a rich, tone-heavy experience, tracked mostly live in the studio with few overdubs, and harking back to a time when capturing the pure essence of the song was the only goal.
“It wasn’t like they got the tape measure out to see how close the microphone was to my guitar, you know?” Hensley jokes. “But there’s a lot of attention to detail. We even toyed around with the idea of cutting analog, but tape just breaks the budget before you even get started. In the end, it didn’t matter. With Brent and his engineer Charles [Yingling], it just seems like they get great sounds in that room without really thinking about it too much.”
And when they plugged in, the same principles applied. You can hear a taste of the Allman Brothers in the barrelhouse anthem “Moonshine Run,” where Hensley grabs a ’52 Telecaster copy, built by Bristol, Tennessee’s own Chuck Tipton. “I talked Chuck into building me a Tele because he had just taken all these blueprints of a real ’52, or maybe even a ’51 Broadcaster—one of these really killer guitars,” he explains. “It’s been my main electric up until recently, and the Fender Deluxe just crushes the damn thing. I hooked up my wah on the third verse for five seconds just to please myself [laughs]! That amp makes anything sound good.”
“We even toyed around with the idea of cutting analog, but tape just breaks the budget before you even get started. In the end, it didn’t matter.”—Trey Hensley
And once again, it’s this commitment to capturing a sound, always in service to the song, that makes Living In A Song such a compelling document. Whether it’s in the poignant Glenn Campbell-isms of “Backstreets Off Broadway” (with Ickes blending seamlessly on background vocals), or the rapidfire energy that propels their version of the Doc Watson classic “Way Downtown” (a Martin D-28 vehicle for Hensley, with bluegrass ace Stuart Duncan burning up his fiddle in tribute), or the spontaneous mischief that sparked “Louisiana Woman” (a jam inspired from-the-hip by Buck Owens’ famed “Diggy Liggy Lo,” and rounded out by Tim Lauer on accordion), Ickes and Hensley are so sympatico with where they’re headed, at this point it just seems to come naturally.
“Most of our favorite records are very live-in-the-studio,” Ickes observes, “so that’s typically the way we operate. And it goes really quick. I don’t think we’ve taken more than two days to make a record yet.”
Trey Hensley's Gear
Hensley made his debut at the Grand Ole Opry, playing with Earl Scruggs, when he was just 11 years old.
Photo by Jim Summaria
Guitars
- ’80s Gibson J-200
- 1954 Martin D-28
- 2021 Martin D-41 standard (on tour)
- 1965 Harmony Sovereign Deluxe H1265
- Preston Thompson acoustic with Gene Parsons B-bender
- Chuck Tipton T-style
- L.R. Baggs Anthem SL pickup
Amps
- ’65 Fender Deluxe black-panel
- Fender Tone Master Deluxe (live)
Effects
- L.R. Baggs Voiceprint DI box
- Boss CE-2W Waza Craft Chorus
- Boss HM-2W Waza Craft Heavy Metal Distortion
- DigiTech Whammy Ricochet
- Electro-Harmonix Micro Q-Tron
- Grace Design ALiX preamp
- Keeley Reverb
Strings & Picks
- D'Addario Nickel Bronze (.013–.056)
- BlueChip TAD60 picks
For his part, Ickes also finds it easier to tap into a deeper level of expression, and some of that has to do with his main instrument. “I was playing Scheerhorns forever, but Byrl’s guitars have just a little more crispness,” he says. “What I like in a really good dobro—and I think a lot of this actually has to do with the way they do the bridge, but there’s a response time. I mean, this guitar is in your face frickin’ immediately. It just seems like it gets to my ear quicker than any other guitar I’ve played. And that’s exciting, you know? It’s like a force or something.”
The excitement becomes visceral on songs like A.P. Carter’s “I’m Working On A Building” and the haunting ballad “I Thought I Saw A Carpenter,” which Ickes wrote for his dying father. His flawless instincts on lap steel are beginning to reach that rarified zone where the chord choices that would ordinarily originate with a pedal-steel guitar have crept into his playing—sometimes unexpectedly, but always with a relaxed sense of intention that still keeps him grounded.
“Most of our favorite records are very live-in-the-studio, so that’s typically the way we operate. I don’t think we’ve taken more than two days to make a record yet.”—Rob Ickes
There’s one player he cites as a key influence. “Jerry Byrd, man,” he says without hesitation. “He had this way of playing that was like a voice, you know? Obviously on a slide instrument, the pitch is very critical, and very difficult, and he just never missed it. It came from his soul, and at the same time he was just a great technician. You never heard the bar; you never heard the pick. All you heard was the music.”
For Living In A Song, as the title suggests, Rob and Trey explored their songwriting abilities more earnestly than on previous records.
Photo by Jeff Fasano
“Technically on the dobro, we don’t usually give a lot of vibrato,” he continues, “but he did, and it didn’t sound nervous. To me, that opened up a whole new way of playing using my left hand that I had never considered, because I didn’t want that nervous sound. And I honestly don’t know how he does it, but it’s kind of rubbed off on me. Somehow I’m able to do it, and it just sounds more in tune.”
Of course, the act of songwriting itself describes an ongoing journey toward self-discovery—the “long and winding road” that can lead to enlightenment, or wisdom, or redemption, or any exalted state you can imagine when you’re tapping into what Harlan Howard called “three chords and the truth.” As if to accentuate the point, Hensley takes the album’s concluding song, “Thanks,” as an example of the serendipity that can unfold so suddenly when you attune yourself to what’s right in front of you.
“I mean, this guitar is in your face frickin’ immediately. It just seems like it gets to my ear quicker than any other guitar I’ve played.”—Rob Ickes
“A friend of mine, Lyle Brewer, had written the melody,” he recalls, “and he asked me if I might want to write something to it. And honestly, it just sat there for a bit, because I didn’t listen to it with enough intention to really focus on it, but the title of the song as he had written it was ‘Thanks.’ And of course I’m a big Tom T. Hall fan, and as soon as I heard it, it sounded like something he would have written. It just came to me and it was done. It was done before it ever began, really. I feel like that song always existed, and I just stumbled on it, you know?”
When the duo convened with Maher at the studio to record it, lightning struck again. “It was just us, me and Rob and Brent, sitting in the studio with a few mics up, with no real intention other than we’re gonna get this down as a demo. And I remember Brent—you can hear it. He picks up a guitar about a verse in, and starts hitting the back of it, as a percussion thing, you know? We got to listening to it, and Brent told us, ‘What do you think if we just use this version? It has a vibe to it, and it’s silly to try it again if we’ve already got it.’ And I love it, because that’s the version that made the record. Every time I hear Brent pick up that guitar, it just makes me smile.”
YouTube It
Ickes and Hensley perform the title track from Living In A Song, with Trey leading with his rich vocal and acoustic textures before Rob enters with his signature resonator twang and harmonies.
Stompboxtober Day 23 is here! Today’s prize is a pedal from J. Rockett Audio. Enter now and come back for more daily prizes!
J. Rockett Audio Designs PXO Phil X Signature Overdrive Pedal
The PXO was created as a live or studio tool. When we sent Phil the overdrive sample he found that it saved him in backline situations and provided him a drive that plays well with others.
The PXO is an overdrive/boost where you can select pre or post giving you variety in how you want to boost, EQ and overdrive. We have provided standard controls on the overdrive side such as Volume/Gain/Overdrive and EQ but on the boost side you have a separate Tilt EQ that allows you to EQ with simplicity. You can experiment by cascading in a pre or post situation and experiment from there. The PXO has a lush, thick feel to the bottom end and a smooth top end that begs you to dig into the note.
Vintage-style reverb, tremolo, and vibrato sounds abound in a 3-in-1 stomp that might be the only box you need.
Fender’s Greasebucket system is part of Cory Wong’s sonic strategy.
Here’s part two of our look under the hood of the funky rhythm guitar master’s signature 6-string.
Hello and welcome back to Mod Garage. In this edition, we’re continuing our journey through the Fender Cory Wong Stratocaster wiring, bringing it all together.In the previous installment, the last feature on the funky 6-stringer’s signature axe that we discussed was the master volume pot and the corresponding treble-bleed circuit. Now, let’s continue with this guitar’s very special configuration of the tone pots.
Tone pot with Fender Greasebucket tone system:
This 250k tone pot is a standard CTS pot with a 90/10 audio taper found in all U.S.-built Fender guitars. The Cory Wong guitar uses the Fender Greasebucket system, which is added to the pot as a ready-to-solder PCB. The Greasebucket PCB is also available individually from Fender (part #7713546000), though you can use conventional electronic parts for this.
Fender introduced this feature in 2005 on some of the Highway One models and some assorted Custom Shop Strats. The Greasebucket name (which is a registered Fender trademark, by the way) is my favorite of Fender’s marketing names, but don’t let it fool you: Your tone will get cleaner with this modification, not greasy and dirty.
According to Fender, the Greasebucket tone circuit reduces high frequencies without adding bass as the tone knob is turned down. Don’t let that description confuse you. A standard Strat tone control does not add any bass frequencies! As you already know, with a passive system you can’t add anything that isn’t already there. You can reshape the tone by deemphasizing certain frequencies and making others more prominent. Removing highs makes lows more apparent and vice versa. In addition, the use of inductors (which is how a passive pickup behaves in a guitar circuit) and capacitors can create resonant peaks and valleys (band-passes and notches), further coloring the overall tone.
Cory Wong bringing the funk onstage.
This type of band-pass filter only allows certain frequencies to pass through, while others are blocked. The standard tone circuit in a Strat is called a variable low-pass filter (or a treble-cut filter), which only allows the low frequencies to pass through while the high frequencies get sent to ground via the tone cap.
The Greasebucket’s band-pass filter is a combination of a high-pass and a low-pass filter. This is supposed to cut high frequencies without “adding” bass, which has mostly to do with the resistor in series with the pot. That resistor means the control will never get to zero. You can get a similar effect by simply not turning the Strat’s standard tone control all the way down. (The additional cap on the wiper of the Greasebucket circuit complicates things a bit, though; together with the pickups it forms an RLC circuit, but I really don’t want to get into that here.)
The standard Fender Greasebucket tone system is used in the Cory Wong Strat, which includes a 0.1 μF cap and a 0.022 uF cap, along with a 4.7k-ohm resistor in series. These are the values used on the PCB, and without the PCB it looks like the illustration at the top of this column.
Push-push tone pot with preset overwriting function:
The lower tone pot assigned to the bridge pickup is a 250k audio push-push pot with a DPDT switch. The switch is used to engage a preset sound by overwriting the 5-way pickup-selector switch, no matter what switching position it is in. The preset functionality has a very long tradition in the house of Fender, dating back to the early ’50s, when Leo Fender designed a preset bass sound on position 3 (where the typical neck position is on a modern guitar) of the Broadcaster (and later the Telecaster) circuit. Wong loves the middle-and-neck-in-parallel pickup combination, so that’s the preset sound his push-push tone pot is wired for.
The neck pickup has a dedicated tone control while the middle pickup doesn’t, which is also another interesting feature. This means that when you hit the push-push switch, you will engage the neck and middle pickup together in parallel, no matter what you have dialed in on the 5-way switch. Hit the push-push switch again, and the 5-way switch is back to its normal functionality. Instead of a push-push pot, you can naturally use a push-pull pot or a DPDT toggle switch in combination with a normal 250k audio pot.
Here we go for the wiring. For a much clearer visualization, I used the international symbol for ground wherever possible instead of drawing another black wire, because we already have a ton of crossing wires in this drawing. I also simplified the treble-bleed circuit to keep things clearer; you’ll find the architecture of it with the correct values in the previous column.
Cory Wong Strat wiring
Courtesy of singlecoil.com
Wow, this really is a personalized signature guitar down to the bone, and Wong used his opportunity to create a unique instrument. Often, signature instruments deliver custom colors or very small aesthetic or functional details, so the Cory Wong Stratocaster really stands out.
That’s it! In our next column, we will continue our Stratocaster journey in the 70th year of this guitar by having a look at the famous Rory Gallagher Stratocaster, so stay tuned!
Until then ... keep on modding!
The Keeley ZOMA combines two of iconic amp effects—tremolo and reverb—into one pedal.
Key Features of the ZOMA
● Intuitive Control Layout: Three large knobs give you full control over Reverb Level, Tremolo Rate,and Depth
● Easy Access to Alternate Controls: Adjust Reverb Decay, Reverb Tone, and Tremolo Volume withsimple alt-controls.
● Instant Effect Order Switching: Customize your signal path. Position tremolos after reverb for avintage, black-panel tone or place harmonic tremolo before reverb for a dirty, swampy sound.
● True Bypass or Buffered Trails: Choose the setting that best suits your rig.
Three Reverb and Tremolo Modes:
● SS – Spring Reverb & Sine Tremolo: Classic spring reverb paired with a sine wave tremolo for that timelessblack-panel amp tone.
● PH – Plate Reverb & Harmonic Tremolo: Smooth, bright plate reverb combined with swampy harmonictremolo.
● PV – Plate Reverb & Pitch Vibrato: Achieve a vocal-like vibrato with ethereal plate reverb.
Reverb: Sounds & Controls
● Spring Reverb: Authentic tube amp spring reverb that captures every detail of vintage sound.
● Plate Reverb: Bright and smooth, recreating the lush tones of vibrating metal plates.
● Reverb Decay: Adjust the decay time using the REVERB/ALT SWITCH while turning the Level knob.
● Reverb Tone: Modify the tone of your reverb using the REVERB/ALT SWITCH while turning the Rate knob.
Tremolo: Sounds & Controls
● Sine Wave/Volume Tremolo: Adjusts the volume of the signal up and down with smooth sine wavemodulation.
● Harmonic Tremolo: Replicates classic tube-amp harmonic tremolo, creating a phaser-like effect withphase-split filtering.
● Pitch Vibrato: Delivers pitch bending effects that let you control how far and how fast notes shift.
● Alt-Control Tremolo Boost Volume: Adjust the boost volume by holding the REVERB/ALT footswitch whileturning the Depth knob.
The ZOMA is built with artfully designed circuitry and housed in a proprietary angled aluminum enclosure, ensuring both simplicity and durability. Like all Keeley pedals, it’s proudly designed and manufactured in the USA.
ZOMA Stereo Reverb and Tremolo
The first sound effects built into amplifiers were tremolo and reverb. Keeley’s legendary reverbs are paired with their sultry, vocal-like tremolos to give you an unreal sonic experience.