A trio of vintage-rooted analog stomps rises from dustbin has-beens to just-maybe gotta-haves.
Beholding the three new Orange Vintage Series pedals—in all their substantial, Technicolor splendor—it’s hard to believe that they weren’t more successful in their original incarnation. Orange didn’t shift many original Distortion, Phazer, and Sustain units. And these days, when even the most obscure stompbox has been dissected down to the molecular level, little is written about them. Few original specimens pop up for sale, and even Orange itself had to hunt and gather pedals from the guitar community so they could study for this resurrection project.
I’m grateful they went to the effort though. The new U.K.-built Orange effects are awesome. They’re stupidly easy to use. They look amazing—pedalboard space be damned. They also sound killer and offer real sonic alternatives to more common old-school-style effects.
Each of the Orange Vintage Series pedals are $249, which is not cheap—especially given their simplicity. By they are beautifully made, with tidy through-hole circuit boards, serviceable parts, and quality that rivals or equals what I see in a lot of boutique-class pedals selling for similar prices. They are also beautiful. And I, for one, find inspiration in pedals that are fun to look at—particularly when they sound as good as these.
Orange Distortion, Sustain & Phaser Pedal Demos | First Look
When the original Orange Distortion appeared in the late ’70s, the delineations between fuzz, booster, overdrive, and distortion were neither clear nor very widely discussed in the greater guitar sphere. Generally, a customer probably went into a store looking for a tool to make their rig sound nastier, tried out a few things, and left with the one they liked best.
It’s cool, then, that this iteration of the Orange Distortion—which, from this trio, deviates most from the original—so adroitly spans so many of those categories. Engineer Ade Emsley didn’t love the sound of the original, so he overhauled the whole circuit. In this iteration, the Orange Distortion is built around a JFET-based amplifier circuit with preset bass and midrange in the tone stack and a treble control that can be adjusted via an internal potentiometer. This shift in design ethos does nothing to diminish the Orange Distortion’s 1970s aura when it’s switched on, however.
Like a few late-1970s circuits—the DOD 250 and MXR Distortion + come to mind—the Orange Distortion’s drive can be hot and aggressive but leave a lot of room for string detail to breathe. The compression inherent in distortion is not too oppressive here, which helps make things sound big and organic. The high-mid voice has a tough Marshall accent that can dish sweet Peter Green-style lead tones. And pretty grinding distortion tones can still feel and sound articulate. The Orange Distortion also excels at the other end of the gain spectrum. It works as a pretty-clean to just-barely-dirty boost that adds lots of extra-explosive life and sparkle to a bridge pickup and lends a Fender amp circuit a just-right dose of Anglo-amp presence and heat.
A shift in design ethos does nothing to diminish the Orange Distortion’s 1970s aura when it’s switched on.
A few players will want to take advantage of the treble pot on the interior—particularly humbucker players. But while the Curtis Novak Widerange units I used could sound blurry past the first third of the gain range, these tones were still beautiful, liquid stuff. The pedal is also responsive to dynamics, and guitar volume attenuation is effective for coaxing clean tones.
Though “distortion” may suggest a narrow range of tones, Orange’s Distortion gives you a lot of sounds to work with. The near-clean tones are lively and detailed. The mid-gain tones, meanwhile, are rich and brimming with naturalistic and amp-like saturation characteristics. It’s less claustrophobic than my favorite old RAT2, more open and meatier than a Klon clone at high gain settings, and responsive to picking and volume dynamics. Classic rock-oriented players will rejoice at the sounds available here, but there are also loads of tones for less stylistically constrained players to explore, from jangly to compressed and fuzzy.
We are spoiled for phaser choice these days—both in sheer numbers and in the extensive waveform-shaping options you get in newer pedals. In light of these evolutions, it’s easy to forget how limited and primitive early phasers were. The two pillars of phase at the time, the MXR Phase 90 and Electro-Harmonix Small Stone, each had just one knob for modulation rate. Only the latter took the radical step of adding a “color” or phase intensity switch. Orange’s Phaser is built in the manner of these classic units. It exhibits many of the best attributes of both but is intoxicating on its own merits. And like so many great 1-knob phasers, it’s deeper and more versatile than you might think.
Like both a vintage Small Stone and the Phase 90, the Orange Phaser’s modulations feel and sound extra dimensional.
Like the original Phase 90 and Small Stone, the Orange Phaser is a 4-stage phaser circuit, which usually adds up to a sweet spot between intensity and clarity. In the Orange Phaser, that translates to a liquid pulse that’s reminiscent of a favorite vintage Small Stone. It’s a little less vowel-y than my favorite script Phase 90. But like both a vintage Small Stone and the Phase 90, the Orange Phaser’s modulations feel and sound extra dimensional. In the case of the Orange unit, that means a balanced emphasis on low- and high-end frequencies as it cycles through its modulations, which gives it a chewiness and a noticeable sense of size. And for an analog phaser, the Orange is a remarkably quiet pedal. Its low noise floor creates extra clarity and a full-spectrum feel.
A 4-stage, 1-knob modulator—we’ve heard this tune before, right? Yes and no. The Orange unit is highly reminiscent of vintage Small Stone and Phase 90 sounds. But the low noise floor enhances detail in an already clear-sounding circuit, creating a more vivid picture of the rubbery drag and elasticity that makes a vintage phaser sound so watery and immersive. It may be very old school, but Orange’s phaser still feels like real refinement.
“Sustain” in the case of this new Orange pedal means compression. And this take on vintage optical compression spans familiar and more open-ended sounds and textures. For starters, the Orange Sustain, like the Phaser, adds very little additional noise to your signal, so you can add loads of sustain (via the depth control) and an ample helping of boost (from the level control) without adding an intolerable layer of hiss.
At certain settings (and especially at low volumes), the Sustain feels and sounds a little like the many Ross-derived compressors that appeared in the 1970s. And many players who use a Dyna Comp or other Ross-inspired compressors will find cool equivalent sounds and effects in the middle ranges of the Sustain’s controls. In general though, the Orange’s optical circuitry helps make the Sustain feel much more oxygenated. There’s a lot less speaker-smothered-in-a-blanket squish and obliteration of picking dynamics—even at high sustain levels. For players that like the sonic benefits of super-heavy squish, the absence of these heaviest compression sounds might be a deal breaker. But I suspect most players will love the clear, potent boost and the more subtle squish and sustain this circuit generates.
The Orange’s optical circuitry helps make the Sustain feel much more oxygenated.
The Orange Sustain, like its sibling pedals in the Vintage Series, inhabits a very cool niche. It’s as simple-to-use and as sonically forgiving as a Dyna Comp—perhaps even more so. But with a well-executed and simple optical circuit, it manages to sound big and transparent almost in the fashion of a studio compressor. Low-compression boost sounds are burly and smooth, thanks, in part, to the optical circuitry. And piling on more sustain and output volume makes things warm and growly. High-squish addicts, or those that like the more brash side of a Ross or Dyna Comp, might find the Orange a little refined. But try plugging one in with a little reverb and a big tube amp cranked up loud.… I expect you’ll be psyched.
Week #3 is here! You could win gear from Carl Martin, Rockett Pedals, Origin Effects, Pigtronix, Truetone or VOX Amplification! Giveaway Ends October 3, 2022.
The world of music has changed and the world of guitar playing has changed along with it. It is becoming normal to not see the full guitar rigs of the 70’s 80’s and 90’s, and just see guitar players with minimal systems to achieve their signature sounds.
Introducing the Carl Martin Ampster…. from the company that has shone the single analog light down that deep digital tunnel. The Ampster, a single tube driven amp/speaker simulator that can either supplement your amp, or replace it. A fully analog unit with controls that are the same as your amplifier with the addition of a mute switch, a speaker selection switch and a voicing switch. What’s more important, the Ampster reacts to your playing in the same way your full size amp does, giving you the same organic feel with zero latency!
The Uni-Verb is a faithful analog recreation of the Univibe with an added 50’s spring tank reverb, expanded control section, and effects loop. This pedal runs at 24v like the original but is internally converted to 24v so you can use a standard 9v power supply. The effects loop separates the chorus/vibe and the reverb
• Analog vibe/chorus running at 24v like the original (powers with a standard 9v)
•Built in 50’s spring tank reverb selectable via foot switch
•Effects loop separating reverb and chorus/vibe for versatile routing options
•Expanded modulation controls for more flexibility and versatility than the original
The Halcyon Green Overdrive is a classic low-gain drive pedal featuring our proprietary Adaptive circuitry. This unique design allows it to adapt its voicing in response to pick attack and volume changes, making it one of the most dynamic and interactive overdrives out there. While it is based on the same green pedal that has inspired countless clones, this little box goes way beyond what the average overdrive has to offer.
Star Eater is an all-analog, dual footswitch super-jumbo Fuzz with a footswitchable booster and variable filter stage, allowing players to easily sculpt a massive array of inspiring, unique fuzz tones. On the fuzz side, newly-available, precision-matched transistor pairs are utilized to ensure that each and every unit is perfectly dialed in to “the sweet spot” that can be so elusive to find in vintage pedals. A rocker switch provides your choice of Germanium or Silicon color. Downstream from the fuzz, a powerful booster stage drives the filter in the Star Eater. Scoop and Bump voicings for the filter can be selected via a rocker switch, drastically changing the frequency response of the Sweep control throughout its entire range. Built to last and designed to inspire, the Star Eater brings a unique approach and a new standard of performance to the world of boutique fuzz pedals. Runs on standard 9VDC.
The 1 SPOT Pro CS12 power supply can provide three times as much power to your pedals as transformer-based power bricks. Each of the 12 outputs are completely isolated, regulated and filtered to give you noise-free performance. With no transformer to hinder its abilities, there is never any proximity noise. And being the world’s first multi-output switching power supply for musicians, it will work anywhere in the world without modification. Quiet, dependable, affordable, and powerful!
Iconic amp sounds for your pedalboard. The Valvenergyvalve distortion pedals offer distortion tones based on iconic amps in a compact pedal format, powered by Nutubefor warm and responsive amp-like tones.