
A step-by-step guide to transforming a template single-coil import into a humbucker-equipped firebreather with neck-and-bridge-pickup coil-splitting.
Modding a guitar yourself doesn’t need to be scary. Even if you don’t have any experience working on your instrument, taking things step by step can yield some amazing results.
What you’ll need for this project:
Parts and Supplies
- Three Seymour Duncan JB Jr. pickups
- Pure Tone Multi-Contact Output Jack
- .022MFD orange drop capacitor
- Two 500k CTS potentiometers
- One push-pull pot DPDT on/on switch assembly
- 60/40 rosin core solder
- 22 AWG non-shielded PVC-insulated circuit wire
- Heat shrink tubing
- Small zip ties
- Guitar string set
Tools
- Soldering Station
- Small clippers
- Small round-nosed pliers
- Phillips screwdriver
- 1/2" nut driver
- Strip of painter's or masking tape
- A small jar with a lid
For example, I’m going to show you how a hardtail Squier Bullet Strat, which you can pick up for less than $200 street, can be transformed into a more versatile tone machine by non-invasively replacing its stock single-coil pickups with humbuckers and installing a push-pull pot for coil-splitting the neck and the bridge pickups—where many of the sweet sounds live. While I’m at it, I’ll explain how to install a more durable and efficient jack. Even a beginner can conceivably do all of this over a weekend, and the result will be a very playable guitar with a wide selection of sounds that you can enjoy for many years.
One thing I’ll ask you to do first is brush up on your soldering skills. Unless you’re already on top of those, you should check out “Soldering 101: A Step-by-Step Guide” at premierguitar.com. If you don’t have a good soldering iron—one that’s got controllable temperature settings and speedy thermal recovery—you should get one. I prefer to use a Hakko Soldering Station ($115 street) with digital readouts, and keep the temperature set at 750 degrees Fahrenheit. Here it is, in Photo 1.
Photo 1
Keep in mind that any iron you use should be at least 40 to 60 watts or it will not get the solder or metal points hot enough. (Twenty-five-watt irons are common, but don’t use them for this job. They are for delicate circuit-board soldering and not point-to-point work.)
I also recommend Kester 60/40 rosin core solder, which is 60 percent tin and 40 percent lead, in .062" thickness. It’s perfect for electronics. (Note: Wear a face mask, like an N95, or work in a very well-ventilated area when soldering.)From Single-Coils to Humbuckers
The first step occurs before the guitar reaches the workbench. We ordered three Seymour Duncan JB Jr. Strat pickups ($99 each), in Photo 2, which are single-coil-slot-sized humbuckers that, after being swapped in, will bump the upper mids and overall output the Squier Bullet Strat produces considerably.
Photo 2
For this mod, you’ll also need two 500k pots (we chose the CTS brand), and one 500k push-pull pot/DPDT switch—all easy to find online and displayed along with the clippers and pliers needed for this project in Photo 3.
Photo 3
Now, let’s get to started!
1) Detune the guitar to avoid flying-string accidents. Then, using a small wire cutter, clip the strings and remove them from the guitar. Remove the pickguard screws to release the pickguard. Put the screws in a small jar with a lid and put them aside, clear of the work area. You don’t want to be on your hands and knees looking for these later.
As you lift the pickguard, you’ll need to slide it slightly out from around the neck to pull it clear. Then, turn the pickguard over so you can see the wiring harness for the electronics.
2) Next, you’ll want to clip the ground wire that runs from the bridge to the volume pot (this wire looks like it’s coming out of the body of the guitar), as well as the white output-jack ground wire, which runs between the volume pot and an output-jack lug or pin—the small horn-like protrusion from the jack designed to accept wires. Then, clip the red, or “hot,” wire, which carries the signal to the output jack, from the center pin of the volume pot. Now, the pickguard is separated from the guitar and can be placed on an open, convenient spot on your workbench, for the next steps.
3) It’s time to strip the pickguard. After clipping the wires that run from the pickups to the volume pot casing switch, you’ll need to unscrew the pickups from the pickguard and pop them out.
Then, remove the screws—which go into your jar—on the 5-position pickup selector switch and gently remove its plastic top by pulling up on it. Now, you can pull the 5-way switch out of the bottom of the pickguard and save it for the rewiring process. You could leave the 5-way in place instead, but removing it gives you more space to work on the rest of the pickguard electronics assembly.
To remove the pots, gently pull up on the knobs and they will lift off the face of the pickguard. If they resist, consider using a cereal spoon to pry the dials up, and perhaps place a thin piece of cloth, like part of a t-shirt, under the spoon to keep the pickguard scratch-free. This method is less hazardous to the pickguard than using a flathead screwdriver.
Next, unscrew the nuts on the front of the pickguard that hold the pot assemblies in place. (They were revealed after you lifted the dials up.) You’ll probably need a pair of pliers to loosen them a bit, but, again, be careful not to scratch the pickguard. Turn the pickguard over again and clip the wires from the pots, which—reminder—we’re replacing, so don’t worry about saving them. (Standard CTS pots sell for about $7—cheap.) Then, the pots should pop right out. In Photo 4, from a bit later in the process, the pots, DPDT switch, and pickups have already been reinserted, but you can use this photo to view the nuts around the tone and volume control spindles.
Photo 4
4) Now, it’s easy to install the JB Jr.’s on the pickguard. Simply pop them through the pickup slots and screw them in place. Make sure the top of the letters reading “Seymour Duncan” face the neck for all three pickups, as in Photo 4. Use two small zip ties to keep all three four-conductor wires from the pickups together, and a piece of painter’s tape to temporarily hold the loose ends of those wires to the pickguard after the pickups are screwed in tight, to prevent the pickup wires from getting in your way as you work on other steps.
5) Time to install the new pots in the volume and first tone control positions, and then to install the push-pull DPDT switch in the tone control position closest to the guitar’s heel—the one farthest from the strings. While 250k pots are good for single-coil pickups, we’re using the 500k pots that are best for humbuckers here. And don’t forget the 5-way switch!
Let’s start by placing both pots and the push-pull in their places, sliding the shafts through the pickguard openings, and then screwing down the nuts to hold them in place—essentially reversing the process we used to remove the originals. (The 1/2" nut driver that you’ll use for the jack replacement we’ll do next also works for screwing down the nuts.)
Likewise, to reinstall the 5-way pickup selector, simply find your two screws and reverse how you removed it.
6) Basic Strat-style wiring—mostly—is the next step. A good standard Strat wiring guide, like the one on the Seymour Duncan website, may be a helpful visual aid. Wire the volume and tone pots to the switch exactly as on the diagram.
Duncan’s JB Jr.’s come with about 10 inches of four-conductor circuit wire already attached. Strip off about 3" of that wire’s outer casing. Then, you’ll see red, white, black, green, and ground wires. Peel about 1/2" of casing from the tips of each of those smaller, color-coded wires.
For the neck pickup, the green and bare wire are tied together and attached to ground—soldered to the top of the middle (tone) pot. You can see the secured pickup leads, ground soldering location, and overall layout in Photo 5.Photo 5
The red and white go to the center right pin (looking from the smooth rear of the push-pull pot) of the on/on DPDT switch atop the push-pull pot. The black wire goes to the corresponding pin on the 5-way switch—the third lug from the front. (Reminder: Always tin your solder points!) You can get a good look at the DPDT and push-pull pot assembly in Photo 6.
Photo 6
For the middle pickup, the red and white wire are soldered together and bent back over the lead wire. You should use a piece of heat shrink tubing to mask it off. (Heat shrink tubing for guitar and bass wiring can be purchased via a number of online sources.) The green and bare wires also go to ground atop the tone pot, and the black wire goes to the number two lug on the 5-way switch.
And finally, the bridge pickup. The green and bare are tied together and, once again, soldered to ground on the top of the tone pot, while the red and white go to the left middle pin on the DPDT switch atop the push-pull pot, and the black wire goes to the corresponding pin—the front slot—on the 5-way switch. That provides coil-splitting, activated for the neck and bridge pickups, by pulling the rearmost knob up.
7) Let’s do one more thing while we’re here to beef up the tone. Let’s put a .022MFD orange drop capacitor in the tone control’s setup, which will roll off less treble frequencies than a higher value capacitor as the tone knob is turned down. The cap can rest atop the center (tone) pot, and let’s solder one of its bare wires to the back of the same pot’s casing for grounding. We’ll take the other wire and shield it with shrink tubing, and solder it to the outside pin on the tone pot. In Photo 7, you can see the completed wiring for the control set.
Photo 7
8) There’s one more control set wiring move.
The bottom lugs of the push-pull DPDT switch are both jumped to ground. This is what makes the coil-splitting possible, by selecting the ground wire or allowing it to go to output. (Use 22 AWG non-shielded PVC-insulated circuit wire for incidental wiring work like this.)
Then, reattach the red output wire from the output jack to the center pin of the volume pot. Follow that with reattaching the bridge ground wire and output-jack ground wire to the back of the volume pot casing.
(Or, you can wait and do these steps later if you are also doing the jack replacement.) Photo 8 displays all of our handiwork!
Photo 8
9) Lastly, replace the pickguard back onto the guitar with the screws you’ve saved and plug the guitar in to test the connections before screwing it back on. Done!
DIY: Replacing Strat Single-Coils with Stacked Humbuckers
Swapping the Output Jack
Our next job is replacing the standard 1/4" jack that lives behind the chrome boat-style output receptacle with a Pure Tone Multi-Contact Output Jack. It has four points of contact, versus the OEM’s two, and dual tension grounds to hug the cable sleeve in place from both sides, providing more reliable performance and better tone.
1) Start by removing the two jack-plate screws, and then remove the output-jack nut with a 1/2" nut driver. Carefully pull out the jack and boat assembly, (Photo 9) and snip the lead wires—the red is hot output and the white is ground—close to the jack, leaving plenty of wire from the guitar’s harness to work with. Strip the leads of those protruding wires about 1/4", for soldering later.
Photo 9
2) Grab your 60/40 rosin core solder and bring your soldering iron up to 750 degrees. While the iron’s heating up, slide some heat-shrink tubing down the output and ground wires. And when the soldering iron is at temperature, tin the wire leads and pins on the Pure Tone replacement jack.
3) Next, solder the hot (red) output and ground (white) wires to the two pins on the jack, being tinned in this photo (Photo 10).
Photo 10
When you’re done, slide the heat-shrink tubing that you slid onto the wire earlier over the pins and solder points. Then, heat the tubing with either a heat gun, hair dryer, or lighter (Photo 11) to make them shrink.
Photo 11
4) Finally, reattach the new output jack to the jack plate with a locking washer underneath, tighten the output-jack nut with the 1/2" nut driver, and reattach the jack plate to the body with the original jack-plate screws, as in Photo 12.
Photo 12
And now you’re ready to plug in and play!
DIY: How to Wire a Guitar Output Jack
- Taming A Fender Hot Rod Deville ›
- 10 Easy Hot Rod Tweaks ›
- Hot-Rod Your Electric: Tiny Tone Tweaks, Done Dirt Cheap ›
- Rig Rundown: Diarrhea Planet - Premier Guitar ›
- Discover Squier's Affordable Starcaster Deluxe & Telecaster Thinline - Premier Guitar ›
Valerie June’s songs, thanks to her distinctive vocal timbre and phrasing, and the cosmology of her lyrics, are part of her desire to “co-create a beautiful life” with the world at large.
The world-traveling cosmic roots rocker calls herself a homebody, but her open-hearted singing and songwriting––in rich display on her new album Owls, Omens, and Oracles––welcomes and embraces inspiration from everything … including the muskrat in her yard.
I don’t think I’ve ever had as much fun in an interview as I did speaking with roots-rock artist Valerie June about her new release, Owls, Omens, and Oracles. At the end of our conversation, after going over schedule by about 15 minutes, her publicist curbed us with a gentle reminder. In fairness, maybe we did spend a bit too much time talking about non-musical things, such as Seinfeld, spirituality, and the fauna around her home in Humboldt, Tennessee.
YouTube
If you’re familiar with June’s sound, you know how effortlessly she stands out from the singer-songwriter pack. Her equal-parts warm, reedy, softly Macy Gray-tinged singing voice imprints on her as many facets as a radiant-cut emerald—and it possesses the trademark sincerity heard in the most distinctive of singer/songwriters. Her music, overall, brilliantly shines with a spirited, contagiously uplifting glow.
Owls, Omens, and Oracles opens with “Joy, Joy!” with producer M. Ward rocking lead guitar over strings (June plays acoustic on nearly all of the tracks and banjo on one). It then recurringly dips into ’50s doo-wop chord changes, blends chugging, at times funky rock rhythms with saxophones and horns, bursts with New Orleans-style brass on “Changed” (which features gospel legends the Blind Boys of Alabama), and explores a slow soul groove with electronic guest DJ Cavem Moetavation on “Superpower.” Bright Eyes’ multi-instrumentalist Nate Walcott helmed the arrangements with guidance from Ward and June, and frequently appears on piano and Hammond organ, while Norah Jones supports with backing vocals on the folk lullaby “Sweet Things Just for You.” The entire album was recorded live to tape, which was a new experience for June.
June shares her perspective on the album and her work, overall. “It’s not ever complete or finished, your study of art,” she offers. “It’s an adventure, and it keeps getting prettier as you walk through the meadow of creating or learning new things. Every artist that you bring in has a different way of performing with you, or the audience might be really talkative or super quiet. And all of that shapes the art—so it’s ever-expansive. It’s pretty infinite [laughs], where art can take you and where it goes.... I kinda got lost there a little bit,” she muses, laughing.June’s favored acoustic guitar is this Martin 000-15M, with mahogany top, back, and sides.
Photo by Tim Bugbee/Tinnitus Photography
June didn’t connect with guitar in the beginning, but discovered her passion for it later, when the instrument became a vehicle for her self-empowerment. She took lessons as a teenager but was a distracted student, preferring to listen to her teacher share the history of blues guitarists like Big Bill Broonzy and Mississippi John Hurt. “I didn’t pick it up again until I was in my early 20s, and my band that I was in with my ex fell apart,” she says. “I still was singing and I still was hearing these beautiful voices sing me these songs, and I didn’t want to never be able to perform them. It was a terrible feeling, to be … musically stranded.
“And I was like, ‘Now, I could go get a new band and get some more accompaniment, but how ’bout I get my tail in there and keep my promise to my granddad who gave me that first guitar and actually learn how to play it, so I’ll never feel like this again.’ The goal was that I would never be musically stranded again.”
She became a solo performer, learning lap steel and banjo along with guitar, and called her style “organic moonshine roots music.” Today, she eschews picks for fingers, even when strumming chords, and is a vital blues-and-folk based stylist when she lays into her playing–especially in a live,solo setting. After two self-released albums, 2006’s The Way of the Weeping Willow and 2008’s Mountain of Rose Quartz, she connected with the Black Keys’ Dan Auerbach, who recorded and produced her 2013 album, Pushin’ Against Stone, at Nashville’s Easy Eye Sound, which helped launch her now-flourishing career.
Valerie June’s Gear
Guitars
Amps
- Fender Deluxe Reverb
Effects
- TC Electronic Hall of Fame
- MXR X Third Man Hardware Double Down booster
- J. Rockett Audio Archer boost/overdrive
Strings
- D’Addario XL Nickel Regular Light (.010–.046)
- Martin Marquis Silked Phosphor Bronze (.012–.054
Photo by Travys Owen
As we talk about art being a shared experience, June says she can be a bit of a hermit at times, but “when it’s time to share the art, then there you are. Even if you’re a painter and you just put your painting on a wall and walk away, that’s an interaction that brings you out of your studio or your bedroom to understand this whole act of co-creating—which to me is a spiritual act anyway. That’s why we’re here, to really understand those rules and layers to life. How do we co-create together?
“And I think it’s so fun,” she enthuses. “I enjoy learning, even when it’s hard. I’m like, ‘Okay, this chord is killing me right now, or this phrase.... but I’ma stick with it. And then that likens to something that I might face when I go out into the world. I’m like, ‘All right, I can get through this.’”
I suggest, “When you say ‘co-creating,’ it sounds like you mean something bigger.”
“Both in the creation of our art, but also in the creation of a life,” June replies. “’Cause how can a life be something this artistic? You get to the end of it and you’re like, ‘Wow, look at what I co-created! With all these other people, with animals, with nature, with sound that’s all around....‘ All of my life has been a piece of art or a collective creation. I imagine them like books: different lives on a shelf. And you go pick one—‘Whoa! I created a pretty fun one there!’ or, ‘Oh, man, I had no hand in that....’ Close the book, next one!” she concludes, laughing as she illustrates the metaphor with her hands.
“So does that make all of your inspirations your co-creators?” I ask.
Valerie June at one of her several Newport Folk Festival appearances, with her trusty Gold Tone banjo
Photo by Tim Bugbee/Tinnitus Photography
“Yeah! Even if they’ve gone before,” says June. “I was listening to some beautiful classical music the other day, and I was like, ‘Man, I don’t know who any of these artists are; they’re all dead and gone, but I’m just enjoying it and it’s putting me in a zone that I need to be in right now.‘ So, we’re always leaving these little seeds for even those who are coming after us to be inspired by.”
Some of her current non-musical co-creators are poets and authors, such as the poet Hafez, the philosopher Audre Lorde, poet Mary Oliver, and Robin Wall Kimmerer, a Potawatomi botanist whose works include Braiding Sweetgrass: Indigenous Wisdom, Scientific Knowledge, and the Teachings of Plants, The Serviceberry: Abundance and Reciprocity in the Natural World, and Gathering Moss: A Natural and Cultural History of Mosses.
“It’s not ever complete or finished, your study of art. It’s an adventure, and it keeps getting prettier as you walk through the meadow of creating or learning new things.”
“These books are so beautiful and show the relationship of humanity with nature and the way trees speak with each other; the way moss communicates to itself,” June explains. “Those ways of being can help humans, who always think we know so much, to learn how to work together better.”
As she’s sharing, I see her glance out her window. “Right now, I just saw a muskrat go across the pond,” she continues. “It’s about this big [holds hands about three feet apart] and it digs holes in the yard. It’s having such a great time and I’m just like, ‘Okay, you are huge, and I’m walking through the yard and falling in holes because of you [laughs]. I’m just watching you live your best life!’ And then there was a blue heron that came yesterday, and I watched it eat fish.... They’re my friends!” she exclaims, with more laughter.
Valerie June believes in the power of flowers–and all living thing–as her creative collaborators.
It might seem like we’re getting a bit off subject, but it’s residents of nature like these who are important in her creative process.
I share how, in my own approach to art, I feel as though we can always access creativity and our ideals, as long as we stay receptive to experiencing and sharing in them. June agrees, but comments that sometimes her best self only wants to sit and focus: “No more information; no more downloads, please.”
An encounter with Memphis-based blues guitarist Robert Belfour, who June frequently saw perform, expanded that perspective for her. She shares about a time she went up to him after a show: “I was like, ‘Hey, I would love to work with you on some music and maybe we could co-write a song or something.’ He was like, ‘Nope! I don’t wanna do it.’ And I said, ‘Whaaat?’ And he’s like, ‘No. I do what I do, and I do not do what anybody else does; I just do what I do.’”
Sometimes, she says, “I think that’s just as much of an outlook to have with creating as anything. It’s like, ‘Okay, I’m there, I’m where I wanna be. I don’t want to be anywhere else.’”
“That’s why we’re here, to really understand those rules and layers to life. How do we co-create together?”
Part of what’s so enjoyable about speaking with June is realizing that she truly exists on her own plane. She has no pretense, and in that, doesn’t hide some of the fears that weigh on her mind at times. But she doesn’t let those define her. It’s her easy, exuberant optimism that sparks a feeling of friendship between us, without having known each other before that afternoon. What are some of her guiding principles as an artist, I wonder?
“I sit with the idea of, ‘Who am I creating this for?’” she says, “and returning to the fact that I’m doing this for me, and, as Gillian Welch said, ‘I’m gonna do it anyway even if it doesn’t pay.’ This is what I wanna do. And reflecting on that and letting that kind of be my guiding force. It’s just something that I enjoy, that I really wanna do.”
YouTube It
From there, the conversation meanders in other directions, and June even generously asks me a few questions about my own artistic beliefs. We share about trusting your gut instinct, and walking away from situations and people who don’t serve us. This reminds her of a bigger feeling.
“With everything that these times hold for us as humans,” she shares, “from the inequality that we face to the environmental change, the political climate, and all the things that could lead us to fear or negativity.... I started to think about it, and I’m like, ‘Okay, well, maybe we are fucked! Maybe the planet is going to eject us and all of the other things are gonna come true! Well, if that’s what’s gonna happen, who do I wanna be?’
“I want to go out in a way that’s sweet or kind to other people, enjoying this experience, these last moments, and building togetherness through music. I want to co-create a beautiful life even in the face of all of that. That’s what I want to do.”
Two Iconic Titans of Rock & Metal Join Forces for a Can’t-Miss North American Trek
Tickets Available Starting Wednesday, April 16 with Artist Presales
General On Sale Begins Friday, April 18 at 10AM Local on LiveNation.com
This fall, shock rock legend Alice Cooper and heavy metal trailblazers Judas Priest will share the stage for an epic co-headlining tour across North America. Produced by Live Nation, the 22-city run kicks off September 16 at Mississippi Coast Coliseum in Biloxi, MS, and stops in Toronto, Phoenix, Los Angeles, and more before wrapping October 26 at The Cynthia Woods Mitchell Pavilion in The Woodlands, TX.
Coming off the second leg of their Invincible Shield Tour and the release of their celebrated 19th studio album, Judas Priest remains a dominant force in metal. Meanwhile, Alice Cooper, the godfather of theatrical rock, wraps up his "Too Close For Comfort" tour this summer, promoting his most recent "Road" album, and will have an as-yet-unnamed all-new show for this tour. Corrosion of Conformity will join as support on select dates.
Tickets will be available starting Wednesday, April 16 at 10AM local time with Artist Presales. Additional presales will run throughout the week ahead of the general onsale beginning Friday, April 18 at 10AM local time at LiveNation.comTOUR DATES:
Tue Sep 16 – Biloxi, MS – Mississippi Coast Coliseum
Thu Sep 18 – Alpharetta, GA – Ameris Bank Amphitheatre*
Sat Sep 20 – Charlotte, NC – PNC Music Pavilion
Sun Sep 21 – Franklin, TN – FirstBank Amphitheater
Wed Sep 24 – Virginia Beach, VA – Veterans United Home Loans Amphitheater
Fri Sep 26 – Holmdel, NJ – PNC Bank Arts Center
Sat Sep 27 – Saratoga Springs, NY – Broadview Stage at SPAC
Mon Sep 29 – Toronto, ON – Budweiser Stage
Wed Oct 01 – Burgettstown, PA – The Pavilion at Star Lake
Thu Oct 02 – Clarkston, MI – Pine Knob Music Theatre
Sat Oct 04 – Cincinnati, OH – Riverbend Music Center
Sun Oct 05 – Tinley Park, IL – Credit Union 1 Amphitheatre
Fri Oct 10 – Colorado Springs, CO – Broadmoor World Arena
Sun Oct 12 – Salt Lake City, UT – Utah First Credit Union Amphitheatre
Tue Oct 14 – Mountain View, CA – Shoreline Amphitheatre
Wed Oct 15 – Wheatland, CA – Toyota Amphitheatre
Sat Oct 18 – Chula Vista, CA – North Island Credit Union Amphitheatre
Sun Oct 19 – Los Angeles, CA – Kia Forum
Wed Oct 22 – Phoenix, AZ – Talking Stick Resort Amphitheatre
Thu Oct 23 – Albuquerque, NM – Isleta Amphitheater
Sat Oct 25 – Austin, TX – Germania Insurance Amphitheater
Sun Oct 26 – Houston, TX – The Cynthia Woods Mitchell Pavilion
*Without support from Corrosion of Conformity
MT 15 and Archon 50 Classic amplifiers offer fresh tones in release alongside a doubled-in-size Archon cabinet
PRS Guitars today released the updated MT 15 and the new Archon Classic amplifiers, along with a larger Archon speaker cabinet. The 15-watt, two-channel Mark Tremonti signature amp MT 15 now features a lead channel overdrive control. An addition to the Archon series, not a replacement, the 50-watt Classic offers a fresh voice by producing retro rock “classic” tones reminiscent of sound permeating the radio four and five decades ago. Now twice the size of the first Archon cabinet, the Archon 4x12 boasts four Celestion V-Type speakers.
MT 15 Amplifier Head
Balancing aggression and articulation, this 15-watt amp supplies both heavy rhythms and clear lead tones. The MT 15 revision builds off the design of the MT 100, bringing the voice of the 100’s overdrive channel into its smaller-format sibling. Updating the model, the lead channel also features a push/pull overdrive control that removes two gain stages to produce vintage, crunchier “mid gain” tones. The clean channel still features a push/pull boost control that adds a touch of overdrive crunch. A half-power switch takes the MT to 7 watts.
“Seven years ago, we released my signature MT 15 amplifier, a compact powerhouse that quickly became a go-to for players seeking both pristine cleans and crushing high-gain tones. In 2023, we took things even further with the MT 100, delivering a full-scale amplifier that carried my signature sound to the next level. That inspired us to find a way to fit the 100's third channel into the 15's lunchbox size,” said Mark Tremonti.
“Today, I’m beyond excited to introduce the next evolution of the MT15, now featuring a push/pull overdrive control on the Lead channel and a half-power switch, giving players even more tonal flexibility to shape their sound with a compact amp. Can’t wait for you all to plug in and experience it!”
Archon Classic Amplifier Head
With a refined gain structure from the original Archon, the Archon Classic’s lead channel offers a wider range of tones colored with gain, especially in the midrange. The clean channel goes from pristine all the way to the edge of breakup. This additional Archon version was developed to be a go-to tool for playing classic rock or pushing the envelope into modern territory. The Archon Classic still features the original’s bright switch, presence and depth controls. PRS continues to stock the Archon in retailers worldwide.
“The Archon Classic is not a re-issue of the original Archon, but a newly voiced circuit with the lead channel excelling in '70s and '80s rock tones and a hotter clean channel able to go into breakup. This is the answer for those wanting an Archon with a hotrod vintage lead channel gain structure without changing preamp tube types, and a juiced- up clean channel without having to use a boost pedal, all wrapped up in a retro-inspired cabinet design,” said PRS Amp Designer Doug Sewell.
Archon 4x12 Cabinet
As in the Archon 1x12 and 2x12, the mega-sized PRS Archon 4x12 speaker cabinet features Celestion V-Type speakers and a closed-back design, delivering power, punch, and tight low end. Also like its smaller brethren, the 4x12 is wrapped in durable black vinyl and adorned with a British-style black knitted-weave grill cloth. The Archon 4x12 is only the second four-speaker cabinet in the PRS lineup, next to the HDRX 4x12.
PRS Guitars continues its schedule of launching new products each month in 2025. Stay tuned to see new gear and 40 th Anniversary limited-edition guitars throughout the year. For all of the latest news, click www.prsguitars.com/40 and follow @prsguitars on Instagram, Tik Tok, Facebook, X, and YouTube.
The Austin-based guitarist sticks with a tried-and-true combo of American guitars and British amps.
If you’ve been on the path of this spring’s Rhett Schull/Zach Person tour, you’ve been treated to one of the coolest rock ’n’ roll double bills criss-crossing North America this year. Person, who is based in Austin, put out his second full-length record, Let’s Get Loud, in March 2024, and it was packed with alt-, blues-, and psychedelic-rock anthems built around his take-no-prisoners playing.
This year, Person is road-doggin’ it around the United States as a two-piece unit with just a drummer, and PG’s Chris Kies caught up with him before he and Shull played the Eastside Bowl in Madison, Tennessee, to see what goods Person is bringing for this spring’s shows.
Brought to you by D’Addario
Customized Custom
This Gibson Jimi Hendrix 1967 Custom SG came from Gibson’s custom shop, and for Person, an SG with humbuckers is a hard combination to beat. He removed the Maestro trem system and had a tailpiece installed for tuning stability on the road, and he subjected the neck humbucker to a “Jimmy Page mod,” which entails removing the pole pieces to get closer to single-coil tones. This SG stays in standard tuning, with Ernie Ball or D’Addario strings (usually .010–.046s). Person digs Dunlop Flow Grip .88 mm picks.
Brown Sound
Person brought this 1967 Gibson SG Special back to life with a list of modifications and upgrades, including new pickups and a refinish, but its wood, neck shape, and original frets all made it worth it to him. The neck shape is narrow but chunky in Person’s hands, landing somewhere near the feel of Tyler Bryant’s 1962 Stratocaster. The pickups now are OX4 P-90s, and like the Custom, this one’s had its Maestro system amputated.
Jeannie Comes Alive
One Thanksgiving at his in-laws’ home in Dallas, Person mentioned how badly he wanted a Gibson LG-2 acoustic. As it happened, his father-in-law suspected his mother had one, which had been relegated to storage in a shed. Person and his wife’s father ventured through rain to dig it out, and sure enough, a very beat up LG-1 was withering away in its case. No local techs in Austin thought it was worth saving, except for Elaine Filion, who was used to taking on bigger restoration projects. Filion succeeded, taking the top off and installing an X-bracing system to turn the LG-1 into an LG-2-style guitar. Now, it’s got an L.R. Baggs pickup and bears the nameplate “Jeannie” on its headstock to commemorate his wife’s grandma, the original owner. Jeannie usually stays home, but Person brought her out specially for the Rundown.
Marshall Muscle
This Marshall JTM45 MkII is Person’s usual go-to. It runs just at breakup volume and gets pushed with some variation of a Pro Co RAT, his favorite dirt box.
Supro Signature
This Super Black Magick Reverb, Tyler Bryant’s signature, is along for the ride as a backup to the Marshall.
Zach Person’s Pedalboard
Person has done tours with just an overdrive pedal and nothing else, so by comparison, this two-tiered Vertex board is luxurious. Still, it’s compact and carries all he needs at the moment. The JHS Pack Rat is the core sound, set fairly heavy and dirty. The rest includes a Boss TU-3, EarthQuaker Devices Double Hoof, Vox Clyde McCoy wah, Boss BF-2, DigiTech Drop, Strymon El Capistan, and an Interstellar Audio Machines Marsling Octafuzzdrive. A TC Helicon Mic Mechanic rides along as a vocal effect so Person can keep control over his voice from night to night.