Don't miss your chance to get loud with these amps!
REVV GENERATOR 120 MK3
The Revv Generator 120 MK3 is the world's first stereo-direct-output reactive load & IR Loading tube amp. It brings you 4 channels of all-tube finely-tuned tone based on feedback from touring artists, session guitarists, & engineers. It also features Two notes Torpedo-embedded technology for going direct to FOH, studio monitors, or headphones. No cabinet required. A built-in noisegate & lush reverb are accompanied by a host of switching & voicing options to make getting the sound in your head faster than ever.
The Blue Channel is chimey with tons of headroom, & now includes a "Wide" switch to give you a wide-range frequency boost for more push & sustain. The Green Channel features 3 all-new drive modes to take this dynamic channel from edge of breakup, to fat overdriven tones. The Purple Channel is famous for its razor-sharp metal clarity, & now in MK3 it receives more low end & saturation with no loss in tightness. Finally, highest gain - Red Channel has an all new touch-sensitive feel which takes you from warm oldschool overdrive to the most massive modern tones available.
Revv Amplification is committed to bringing you the most complete amplifier experience available. Clarity, feel, & tone – for stage, studio, & home.
MT 15
The MT 15 is a commanding two channel amp with balanced aggression and articulation. Now upgraded with JJs 5881 power tubes, the MT 15 punches above its weight class with a large, bold sound, so you can dig in heavy with rhythms but also get singing lead tones out of one amp. Whether recording, practicing, writing, or playing a small room, this amp has everything you need.
"We knew we wanted a low-wattage amp. The challenge was getting a lot of tone and features in a little box. We're all blown away with how it turned out. It's going to be great for someone to take it out of the box, set everything to noon, and have it sound great." – Mark Tremonti
Keeley Custom 12
Designed in collaboration with Robert Keeley of Keeley Electronics as a follow-up to the bestselling Custom 10, the Keeley Custom 12 is built to seamlessly integrate your pedals into the heart of an all-tube Supro amplifier. The preamp and 2-band EQ section are voiced perfectly for running your gain pedals in front of the amp, while still maintaining Supro's signature midrange heft and phenomenal touch dynamics.
MOD® Kits, MOD102+ DIY Guitar Amp
The MOD 102+ is a great place to start for those interested in building their own tube amp. It is based on a classic American tube-circuit design combined with a British-style Class A output tube section that produces 8 Watts of power. At low volume it produces a clean, chimey tone that moves into smooth overdrive at higher volumes. The amp features a three position progressive toggle switch for off-standby-power. In addition, each control features push-pull functionality - pull out the bass control knob for "mid boost", pull out the treble control knob for "bright", pull out the volume control knob for "turbo". These features along with a JJ ECC803-S (a long plate 12AX7 known for its complex mid range tones) allow for a wider variety of tones and extra control for the user. All parts are included along with a pre-drilled steel chassis, wire, and tubes.
Click here for audio clips.
Click here to follow Amplified Parts on Instagram
Two Rock Studio Signature Amp
The Two-Rock Studio Signature is the latest generation of the single channel 35 watt amplifiers. Making some changes to the original Studio Pro 35, the new Studio Signature model remains a 6L6 clean amplifier for a solid pedal platform with some additions that will make the Studio Signature a continued legendary product.
New build techniques, layouts, and materials implemented over the last few years were the key starting points to this amplifier's new construction. The added boost toggles are an obvious change at first glance, allowing the use of our potentiometers with custom tapers. Reverb send control on the back panel and a Return control on the front give room for these toggles. The Gain Structure switch can also be found on the back, allowing the same functions as the flagship Classic Reverb Signature essentially giving 3 front-end types to this already versatile clean amplifier.
New aluminum chassis, anodized in silver or black and donning new silver knobs, a black bronco cab, and black matrix grill cloth give this amp a stunning new look.
Mighty Bass 50BT - Modeling Bass Amp with IR
Mighty Bass 50BT is a versatile bass amp for practice, rehearsing and recording. It's equipped with a premium 6.5" loudspeaker and driven by a 50-watt classic D power amp.
NUX's iconic TSAC modeling technology provides various nice-sounding amp models and all the essential effects with great playability & response, while IR offers you more cab sounds! You can engage drum function with APP, and record phrase loops with footswitch.
Mighty Bass 50BT has 3 channels, you can save one preset in each. For deep tone editing, simply use its Mobile APP and PC Software!
Highlights:
-Bass Amp Modeling with Cab IRs, expanding possibilities of tones
-IR loading (1024 samples) with Edit Software
-Whitebox compressor effect offers you analog touch & response
-Independent IR toggles for Amp and DI out
-USB Audio Stream for recording interface with routing setup
-Footswitch to remote Drum&Loop (60s)
Click here for audio clips
Click here for video clips
Click here to follow NUX on Instagram
Featuring a newly-voiced circuit with more compression and versatility, these pedals are hand-crafted in Los Angeles for durability.
Messiah Guitars custom shop has launched a pair of new pedals: The Eddie Boostdrive Session Edition and Lil’ Ed Session Drive.
The two pedals are full-size and mini-sized versions of a newly-voiced circuit based on Messiah’s successful Eddie Boostdrive. The two new “Session” pedals feature more compression and versatility in the overall tone, and showcase Messiah’s ongoing collaboration with Nashville session guitarist Eddie Haddad.
The new Session Boostdrive schematic includes a fine-tuned EQ section (eliminating the need for the Tight switch on the earlier Boostdrive) and two independently operated circuits: a single-knob booster, and a dual-mode drive featuring a 3-band EQ. The booster consists of a single-stage MOSFET transistor providing boost ranging from -3dB to 28dB. At low settings, the boost adds sparkle to the tone, while a fully cranked setting will send your amp to a fuzzy territory. Thebooster engagement is indicated by a purple illuminated foot switch.
The overdrive contains a soft-clipped op-amp stage, inspired by a screamer-style circuit. The pedal includes a classic Silicon clipping mode (when activated, the pedal’s indicator light is blue)and an LED mode for a more open, amp-like break up (indicator light is red).
The active 3-band EQ is highly interactive and capable of emulating many popular drive sounds. Although both effects can be used separately, engaging them simultaneously produces juicy tones that will easily cut through the mix. Both new pedals accept a standard 9V pedal power supply with negative center pin.
“I love my original Boostdrive,” says Haddad, “but I wanted to explore the circuit and see if we could give it more focused features. This would make it more straightforward for guitarists who prefer simplicity in their drive pedals. The boost is super clean and loud in all the right ways…it can instantly sweeten up an amp and add more heft and sparkle to the drive section.”
Like their custom guitars and amplifiers, Messiah’s pedals are hand-crafted in Los Angeles for durability and guaranteed quality.
The Lil’ Ed Session Drive pedal includes:
- 5-knob controls, a 2-way mode side switch
- Durable, space-saving cast aluminum alloy 1590A enclosure with fun artwork
- True bypass foot switch
- Standard 9V/100mA pedal power input
The Eddie Session Edition pedal features:
- 6-knob controls, a 2-way mode switch; space-saving top-side jacks
- Durable, cast aluminum alloy 125B enclosure with fun artwork
- Easy to see, illuminated optical true bypass foot switches
- Standard 9V/100mA pedal power input
The Eddie Boostdrive Session Edition retails for $249.00, and the Lil’ Ed Session Drive for$179.
For more information, please visit messiahguitars.com.
Eddie BoostDrive and Lil' Ed pedal review with Eddie & Jax - YouTube
Enjoy the videos and music you love, upload original content, and share it all with friends, family, and the world on YouTube.Joe Glaser has been a pillar of Nashville's guitar community for decades. He's a man that dreams in mechanical terms often coming up ideas while deep in a REM cycle. Through his various companies he's designed, developed, and released a handful of "blue water" solutions to age-old instrument problems making the tolerable terrific. In this comprehensive visit to Glaser's home base, we get up close and personal with several of the products that enhance intonation and playability without disrupting the guitar's integrity.
In addition, Music City Bridge CEO Joshua Rawlings introduces us to a couple software ventures. Shop Flow helps increase productivity and efficiency for guitar builders and repair shops, while Gear Check aims to help guitarist's keep track of their collection and its history. Join John Bohlinger as he goes inside this inconspicuous six-string sanctuary.
Enter for your chance to WIN a Seymour Duncan PowerStage 700 in this PG Perks Exclusive Giveaway!
Seymour Duncan PowerStage 700 Bass 700-watt Bass Amplifier Head
PowerStage 700 Bass is the ultimate solution for bass players seeking power, portability, and pristine sound quality. Designed by Seymour Duncan’s legendary engineer Kevin Beller, a lifelong bass player, this 700-watt bass head delivers unparalleled clarity and performance in a lightweight, rugged package. Whether plugging in on stage or in the studio, PowerStage 700 Bass provides tight low end and rich harmonics, with a footswitchable built-in overdrive for an extra layer of sonic versatility.
A robust, bass-optimized EQ (treble, low mid, high mid, bass and presence) tailors your sound to any room. Need to switch between active and passive basses? You’re covered – PowerStage 700 Bass includes a convenient -10db pad control. Multiple output options (¼”, Speakon, XLR DI, and headphone) work for any setup, whether powering cabinets, going direct to a PA, or recording straight into your audio interface.
PowerStage 700 Bass is compact and durable for easy transport yet powerful enough to fill any venue. This world-class bass head can also serve as the ideal clean power platform to amplify your preamp or modeler. Streamline your rig without compromising your sound and focus on what truly matters—your music.
- 700 Watts of Power at 4 ohms
- Preamp voiced for a wide range of vintage & modern bass sounds
- Built-in Overdrive that can go from a light vintage saturation to full throttle bone-grinding distortion (with optional footswitchable control)
- Effects loop allows for post-preamp processing and easy integration with modelers and preamp pedals
- 4 band EQ, Sweepable mid controls, and presence button offer dynamic tone shaping possibilities
- Aux input
- Super lightweight and durable chassis for easy transport with our optional gig bag or rack ears.