Dave Friedman evolves the Marshall Super Lead template with a 50-watt thumper that adds tone-shaping flex on top of the Plex.
Bright switches add flexibility. Master volume sounds good at lower levels. Switchable built-in Variac.
No effects loop. Priced at upper end of plexi modern reproduction market
$2,799
Friedman Plex Head
friedmanamplification.com
The first entry in Friedman Amplification’s much-anticipated Vintage Collection is the Plex, a painstakingly crafted homage to Dave Friedman’s own 1968 JMP Super Lead plexi—the archetype and foundation on which the entireFriedman lineup is based.
Any working ’60s JMP Super Lead is an amazing amplifier, but the combination of Dave’s ears, experience, and quality time with his own Super Lead add up to a melding of twists and tradition that captures the richness, power, and dynamics of Marshall non-master-volume amps in a high-quality and, if you want, quieter package.
Stripped Down, Lowdown, Bright, and Brighter
True to lineage, the 50-watt Plex uses a pair of EL34 power tubes and a trio of 12AX7s pulling preamp and phase inverter duties. The familiar volume 1, volume 2, presence, bass, and mid knobs handle gain and EQ tasks. But the Plex deviates from tradition, too. An old Marshall Super Lead has four inputs—high and low sensitivity inputs for channel I and II. The Plex, however, uses a single pair of inputs that are hardwired in jumpered fashion—the same way you might jumper on the front panel of a 2-channel Marshall—effectively mixing the two preamp stages. A post-phase-inverter master volume helps keep the sound pressure level in check when you need to cool it without compromising feel and dynamics. And above each volume knob is a 3-way bright switch. The switches alter the frequency and gain response of the corresponding volume control, toggling between a darker bypassed setting, a mild treble boost enabled by a 100 pF bright capacitor, or a screaming third setting with a 4700 pF cap in the line. The power switch doubles as a high/low voltage selector, engaging an internal Variac that drops operational voltage from 120 volts to 90 volts, achieving the brown sound synonymous with ’80s hard-rock Super Lead applications.
The spartan back panel sports outputs for 4-, 8-, or 16-ohm loads and an IEC mains power input. The head weighs in at a reasonable 34 pounds with dimensions of 24" x 10" x 8.75"—just a hair smaller than a real JMP. The circuit is arrayed on a high-quality printed circuit board—a manufacturing method Friedman favors in many respects for quality control purposes.
But … Does It Van Halen?
Hell yes it does. Dime the Plex, flip it to low voltage, and you’re living in the Eddie zone. Recreating that high-octane, modded-Marshall aggression and kerrang with the most familiar Marshall-style knobs is easy and intuitive. But this amp is full of surprises, too, and many sonic possibilities hide behind the simple additional controls.
The lead channel, controlled by volume 1, is aggressive and edgy, capturing the cut and midrange growl most immediately associated with vintage plexis. Anything below 3 on the gain control is pretty clean. At around 4, hot pickups will induce breakup. And in the 5-to-6 range, it comes alive with rich saturation, enhanced harmonics, and sustain. Approaching 10, the Friedman blossoms into something furious and snarling. The 100 pF bright capacitor setting gently lifts the top end for a hint of jangle, while the 4700 pF cap boosts upper midrange and treble, adding even more chimey range and sharper bite.
The normal channel, controlled by volume 2, feels very much like the antithesis of the lead channel. It’s dark and brooding with lots of resonance in the bass. Keeping the gain below 5 still yields a woolly, forceful voice. Starting around 6 it slips into thick clipping, and as you move toward 10, the Friedman delivers progressively denser tonalities, more compression, and more sustain. The 100 pF bright cap mode adds a splash of air, while the 4700 pF setting significantly jacks the drive and boosts frequencies from 1200 Hz up. Each is a very different version of a cool color.
Sonic Structure
Much of the amp’s tone-shaping flexibility comes from using the volume knobs, not just for gain, but as tone controls to create a best match for a specific guitar. In a general sense, the normal channel adds fullness and body to single-coils, while the lead channel brings definition, bite, and clarity to humbuckers. With a Stratocaster, setting both channel volumes in the 3-to-6 range achieves classic Marshall clean that hints at Hendrix. Strat pickups sound zingy with bright caps bypassed, but the 100 pF setting adds even more attractive shimmer. Lead mode and high gain settings are a nice fit for a Strat, too. Setting the lead channel to 7-to-8 and backing the normal channel to 4 pushes the amp to full-bodied, blistering sustain, and adding the 4700 pF bright cap adds upper midrange urgency. P-90s in a Les Paul Jr. are a more extreme version of this recipe—gritty, snarling, and explosive. But if I ever sensed the signal was lacking, just rolling up the normal channel and using the 100 pF cap did the trick—evoking, more than once, the gritty style of the Pixies’ Joey Santiago.
The Plex’sdynamics and touch sensitivity are outstanding. Using just variation in guitar volume and picking intensity, I effortlessly moved from clean arpeggios to crunch and full-on shred. The low sensitivity input felt especially nice for working with these intensity adjustments, too. It predictably reduces gain, but it also darkens and mellows edgier pickups. The vintage-voiced tone stack is sensitive as well. Treble, mid, bass, and presence controls are accommodating, cover a lot of harmonic range, and even extreme EQ settings never seem to neuter the fundamental voice. If you use pedals, you’ll run them straight into the front of the amp. There’s no effects loop here. Still, a Riveter Electric Brass Tacks treble booster with dark amp settings conjured the sounds of early Sabbath, and the front end easily handled the extra level.
My Kid’s Asleep
Usually, implementing a master volume in this type of circuit can produce sonic anemia at low levels. But Dave Friedman’s addition of a unique post-phase-inverter master volume means you can preserve much more tone, character, and feel at tiny-venue levels. The low-voltage Variac mode offers interesting less-hot options, too, enabling spongier, more saturated, creamier tones at less deafening volumes.
The Verdict
The Plex offers a perfect balance of vintage Marshall-ness and a not-too-busy list of practical extra features—maintaining the essence of plexi tone while expanding tone-shaping functionality and increasing the amp’s useful volume range. But for all its enhancements, the Plex stays close to its vintage inspiration, giving it a brash, raw, unruliness that’s always exciting
Friedman PLEX 50-Watt Tube Amplifier Head
PLEX Vintage Style 50-Watt Head with EL-34 Tubes- Friedman Fuzz Fiend Review ›
- Friedman Small Box Overdrive Review ›
- Friedman Amplification Plex Demo | NAMM 2024 ›
- Friedman Dirty Shirley Mini Review ›
Featuring a unique Blah Blah Circuit for expressive filtering effects, versatile tone control, and premium Morley buffer circuit. Available exclusively through the LERXST Reverb Store for $299.
Spawned out of Lifeson’s long-time appreciation and use of the classic wah-wah effect, the Lerxst Blah Blah is a new breed of wah designed specifically for adventurous tone chasers. The Blah Blah uses Morley’s iconic switchless optical wah circuit as a springboard, carefully tuned by Lifeson and the engineers at Lerxst and Morley for an expressively vocal response that is equally usable in both classic and modern applications.
“Wah pedals have been an essential tool of sonic expression for me since the ‘Fly by Night’ album,” explains Lifeson. “With the ‘wah’ side of the Blah Blah, we really wanted to capture that classic sound while also giving it a wide enough frequency response to suit modern players.”
“The guys at Morley have designed some of the greatest wah pedals ever, so it was a natural collaboration to work on this project with them, and also see where we could take it next.”
The Blah Blah’s namesake Blah Blah Circuit is where the pedal sets its sights, and sounds, squarely on the future. Taking inspiration from Lifeson’s immediately recognisable Rock & Roll Hall of Fame Induction acceptance speech from 2013, the Blah Blah Circuit is a cornucopia of expressive, touch-sensitive filtering effects that evoke both vocal and synth-like sounds out of whatever instrument that is run through the pedal – including a recognizable ‘Blah’! The Blah Blah’s onboard tone control allows precise EQ control of these effects to make them fit perfectly alongside anything else in your pedalboard, or mix.
"Alex wanted us to create something unique and inspiring," said Morley Owner Scott Fietsam. "We certainly achieved the 'Blah-talkie' sound, but what surprised us was how versatile this pedal turned out to be. It opened up numerous sonic possibilities in both clean and distorted modes, making it enjoyable for a wide range of players."
Blah Blah Specifications
- Iconic Morley Switchless Optical Wah Circuit
- Switchable Blah Blah Circuit for Expressive Filtering Effects
- Versatile Tone Control for Blah Blah Circuit
- Premium Morley Buffer Circuit
- Sturdy Steel Enclosure
- Heavy-Duty Footswitch, Knobs, and Jacks
- LED Indicator Light
- 9V DC Negative Center Power
- Current Draw: 300mA
- $299
Asked to comment on the implications of such a unique wah pedal in a crowded market of effects, Lifeson said the following: “Blah blah blah, blah blah, blah. Blah blah blah blah, blah blah. Blah, blah blah blah. Blah blah. Blah blah. Blah blah blah, blah blah, blah blah blah. Blah? Blah blah blah, blah blah, blah. Blah blah blah blah blah blah blah. Blah blah blah, blah blah, blah.”
For more information, please visit lerxstamps.com.
With a few minor fingering adjustments another world of musical expression can be unlocked.
Beginner
Beginner
- Look at the pentatonic scale in a new light.
- Understand how to navigate diagonally across the fretboard.
- Use this newfound knowledge to create more musical phrases.
Likely the first melodic device any improvising musician learns is the pentatonic scale. It’s a simple pattern to learn on guitar, it’s easy to play, and it always sounds “correct.” It contains mostly the “good” notes and usually you don’t need to think too much about which notes to avoid. What’s not to love? After a while, however, a certain sameness begins to emerge, and one begins to wonder, “Is there something more here?” Well, it has much more to offer than what you see on the surface.
How do you play a pentatonic scale?
One of the first shapes that guitarists learn when starting to explore the pentatonic scale is the ubiquitous box in Ex. 1. And why not? It’s a simple pattern to memorize, it’s easy to play, and you can get musical sounding results almost immediately. In fact, if you play these notes in just about any order, play in time, and exercise some logical phrasing, you can’t really mess it up.
There is a wealth of guitar vocabulary in this simple device. Eric Johnson, Eric Clapton, Eric Gales, and other legendary guitarists not named Eric have demonstrated this for decades. However, the two-note-per-string nature of the pattern can limit your phrasing. Let’s dive into a few simple things we can do to inject some articulations into an otherwise choppy march across the fretboard.
This isn’t a “Stop doing this and start doing that” proposition but rather a supplement to your bag of badassery that you’ve accumulated. Let’s remap some of the notes found in Ex. 1 to other strings to elongate the scale along the neck rather than simply march across it (Ex. 2).
Notice that we alternate between two notes on a string and three notes on a string. Add some strategic slides into the mix and our little fretboard square dance gets a welcome dose of swagger. Naturally, we will need to practice this descending pattern (Ex. 3) as well. These fingerings have a certain hipness that the box lacks.
Ex. 4 features a nice blues gesture that exemplifies the articulations that this fingering invites. Judicious use of bends, slides, hammer-ons, and pull-offs make the magic happen.
Double-Stop the Presses
The slippery fourths found on adjacent strings combined with an eighth-note delay summon an early ’80s funk/pop feeling. Play Ex. 5 with long legato notes and have a glass of chardonnay on hand for a funky smooth-jazz vibe.
Two often-used tricks are the sliding fourths/hammer-on double-stop phrases in Ex. 6. Once again, it’s the strategic use of slides, hammer-ons, and pull-offs that make the slinky goodness happen. These tasty double-stop licks are useful chordal accents in your solos or R&B-style rhythm parts. Even though Ex. 6 is a bucket of pentatonic scale phrases over a I–VIm–IIm–V chord progression, the double-stops provide a harmonically informed sound. Think Mateus Asato, Stevie Ray Vaughan, or Jimi Hendrix.
Get Louder … Without Turning Up
Did you know that two notes are louder than one? How ’bout that? Next time you’re playing at your local blues jam and the well-intentioned but way-too-loud rhythm player tempts you to turn up your amp, don’t do it. You’ll just add to the problem. Instead try some double-stops (Ex. 7). It transforms otherwise basic melodies into majestic, purposeful, and yes, louder statements without adding to a never-ending volume war.
Peace, Love, and Understanding
Play some nice rhythm guitar without banging out all those barre chords. Yes, barre chords are useful but sometimes it’s just way too much. Guitarists already have to deal with the stigma of being eye-rolling loud. Why is that? The bottom portion of the chord (the power chord part) is an essential sound if you’re in a rock band. But in a blues, R&B, jazz, or country setting, it can sound muddy (and kinda stupid). The low-register notes are getting in your bass player’s way and the keyboard player, by default, is already annoyed at you. Let’s be friends with these folks and sound better in the process.
Reimagining the pentatonic box will add depth and vibe to your playing. And using smaller double-stops versus banging out giant fists-full of notes not only tends to make the band sound better but they’re easier to play too. As a bonus you just may find that your solos sound fuller and more interesting. Don’t forget to acknowledge the perceptive audience that applauds your tasty masterpiece.
Blackstar's 30-watt combo amp with two footswitchable channels, ISF tone control, and built-in tape delay. Available in vintage cream or black finishes.
The features of the Debut 30E have been carefully selected to cover all the needs of an aspiring guitarist; two footswitchable channels, our patented ISF(Infinite Shape Feature) tone control, series effects loop, and a built-in tape delay. This amp is available in two gorgeous vintage finishes; cream covering with oxblood fret, or black and ‘biscuit’ basketweave.
Debut 30E Combo Features
- 30 Watt combo
- 2 Channels – Clean + Overdrive
- Patented ISF tone control
- Line In for jamming along or listening to music
- Speaker emulated Line Out for ‘silent’ practice or recording
- 1x10" custom-designed speaker, producing true Blackstar tones
- Series effects loop
- Stereo playback of Line In sources through headphones
- Dual footswitch control for channel switching
- Compatible with any 2-button latching footswitch (available separately)
- Vintage styling in cream and black options
Debut 30E | No Talking, Just Tones | Blackstar - YouTube
At a recent outdoor NHL Stadium Series performance, it was so cold that my hands went numb. So, I had to improvise. Last month, I wrapped the NHL Stadium Series at Nashville’s Nissan Stadium in front of 68,619 screaming fans and an army of TV production, crew, etc. The network chose to lean into Nashville’s Music City theme by including performances by 12 of the city’s biggest names in music. About a month ago, the director, Michael Dempsey, whom I worked with on several award shows, hired me as the music director. Here’s how it went....