
Mark Tremonti and the gang from Annapolis swing big with a 100-watt, 3-channel blast machine that spans clean and ferocious extremes.
Incredible sounds across all three channels—ranging from pretty and clean to hot and aggressive. Reasonably priced.
No onboard attenuation or reverb.
$1,849
PRS MT 100
prsguitars.com
Mark Tremonti’s relationship with PRS Guitars began in 2000 with his first signature guitar. Eight years later, he had his first signature amp, theMT 15, a successful lunchbox amp that received a Best in Show award at the NAMM show that year. The new 100-watt, 3-channelMT 100 takes Tremonti’s tone concepts to higher and louder heights.
Three Corners of a Colossus
The MT 100 is designed by amp guru Doug Sewell, who built much-revered amps under his name before Paul Reed Smith recruited him. The tube layout includes four 6L6GC power amp tubes—typical enough for a 100-watt amp. But there are eight 12AX7 preamp tubes because each channel has its own preamp section. The clean channel uses one preamp tube (V1) and the overdrive and lead channels each use two. And while the MT 100’s many knobs suggest a complicated affair, the amp is actually pretty straightforward. Each channel has its own controls for presence, master, bass, middle, treble, and gain—that’s it. On the back panel is a tube-driven, series effects loop, where you can patch in reverb or delay as desired. There’s also a very handy panel of bias jacks. A 3-button footswitch is included and there are corresponding LED lights on the switch and the amp’s faceplate (blue for clean, orange for overdrive, and red for lead), so you know which channel is engaged.
Five Years in the Making
f you only know Mark Tremonti from Alter Bridge and Creed, you’d probably assume the MT 100 is a high-gain flamethrower. It’s much more than that, though. Tremonti is an amp fanatic, and his stage setup has traditionally been pretty complex, ranging from Dual Rectifiers for dirty sounds to Twin Reverbs for clean ones. The MT 100 impressively covers much of that turf via a single amplifier.Initially the MT 100 was going to have a 2-channel design like the MT 15, but Tremonti wanted to add an overdrive channel. When I interviewed Tremonti in 2012, he talked of his love of Dumbles. The MT 100’s middle channel is inspired by his favorite Dumble, and took five years of back and forth before the design was finalized. Dumble-style amps are typically extra expensive, so the MT 100’s $1,849 price feels like a bargain for an amp that does Dumble and then some.
With Ears Wide Open
I plugged a couple of guitars into an MT 100, including a semi-hollow and a dual-humbucker solid-body with split-coil options, with the amp hooked up to a Celestion-equipped cabinet. It was easy to find sweet spots for each instrument I tried. With the clean channel’s tone controls at noon and the presence a touch lower than that, the MT 100 sounds bright and a lot like a Fender Twin, with more warmth and copious bottom end. The clean channel brings small details to life. Fingerpicked open chords laced with hammer-on and pull-off embellishments, for example, sound especially pretty. And while the clean sounds are full-bodied, they leave a lot of space for effects like delay and reverb. I do wish that the MT 100 had built-in reverb. Almost all of us have loads of effects at the ready, but it’s also nice when an amp—and clean channel—this fundamentally good enables you to plug and play with a reverb option.
The overdrive channel is a delight, particularly when I use my semi-hollow. With the tone controls all around noon, the presence at 9 o’clock, and the gain at 2 o’clock, I could cop Robben Ford and Larry Carlton fusion sounds in a jiffy. But the overdrive channel isn’t just smooth and heavy. With a bridge-position humbucker and the gain control all the way up, it was easy to tap Brit-style metal and hard rock tones.
For Tremonti fans, the lead channel is probably the MT 100’s main attraction, and it definitely lives up to expectations. Lead sounds bloom with sustain, and notes would ring forever whether humbuckers or split-coils drove the front end. Palm-muted rhythm figures felt massive—floor-shakingly massive. And though you could fairly categorize the lead channel as dark and heavy at times, it’s far from muddy. You’ll hear a lot of detail in these zones. What’s also cool is that the tone foundation of the lead channel is distinctly different than that you hear on the overdrive channel. It really comes across as two different amps rather than the same basic sound with different gain variations on each of the two heavy channels. Factor in the use of effects and you’re looking at a lot of tone possibilities. Switching between channels, incidentally, is smooth, organic, and free from the jarring pops that some channel-switching amps exhibit.The Verdict
In a lot of ways, PRS was brave to build the MT 100. One hundred watts is a lot of power to wrangle, and to get the amp to really move air it needs to be cooking at a volume level that may not be practical in a lot of gigging situations. Obviously, an attenuation option might have been a nice touch (though you can argue that’s what the lunchbox-sized MT 15 is for), and if you use a load box/speaker simulator like UA’s OX, you can still get in on the fun. In larger environments that can handle it with a big cab, though, it is at its most beastly.
PRS and Tremonti should be commended for choosing a streamlined design path, too. Sure, it has three channels, but it forgoes power-scaling capabilities, graphic EQ, the option to use different types of power tubes, a foot-switchable effects loop, or direct recording/speaker cabinet cloning outputs like so many modern amps. And while it eschews bells and whistles, the MT 100 dominates in terms of tone—each of the MT 100’s three channels is dripping with it. If an amp that offers delicious Fender Twin Reverb-meets-Bruno Underground clean tones, a dead-on Dumble-sounding overdrive channel, and a hellacious lead channel that can stand head-to-toe with the Dual Rectifiers, Uberschalls, and 5150s of the world sounds cool to you, you’re probably not going to think once about the lack of gimmicks.
Mark Tremonti's New 100W Amps! The PRS MT 100 Mark Tremonti Signature Amp Demo | First Look
- First Look: PRS MT 100 ›
- Alter Bridge’s Mark Tremonti and Myles Kennedy ›
- Mark Tremonti's New PRS MT100! ›
-
Crank the heat! PG's John Bohlinger plugs into the boutique-built Sterling Vermin, a modern twist on the iconic Rat distortion. Hear it rip through Strats, Teles, and a Les Paul with classic snarl and smooth silicon/BAT41 clipping.
Sterling Vermin RAT
The Sterling Vermin was born from a desire for something different — something refined, with the soul of a traditional RAT pedal, but with a voice all its own.
Built in small batches and hand-soldered in ACT’s Jackson, Missouri headquarters, the Sterling Vermin is a work of pure beauty that honors the brand legacy while taking a bold step forward for creativity.
The Sterling Vermin features the LM741 Op-Amp and a pair of selectable clipping diodes. Players can toggle between the traditional RAT silicon diode configuration for a punchy, mid-range bite, or the BAT41 option for a smoother, more balanced response. The result is a pedal that’s equally at home delivering snarling distortion or articulate, low-gain overdrive, with a wide, usable tonal range throughout the entire gain spectrum.
The pedal also features CTS pots and oversized knobs for even, responsive control that affords a satisfying smoothness to the rotation, with just the right amount of tension. Additionally, the polished stainless-steel enclosure with laser-annealed graphics showcases the merging of the pedal’s vintage flavor and striking design.
From low-gain tones reminiscent of a Klon or Bluesbreaker, to high-gain settings that flirt with Big Muff territory — yet stay tight and controlled — the Sterling Vermin is a masterclass in dynamic distortion. With premium components, deliberate design and a focus on feel, the Sterling Vermin is more than a pedal, it’s a new chapter for RAT.
The Sunset is a fully analog, zero latency bass amplifier simulator. It features a ¼” input, XLR and ¼” outputs, gain and volume controls and extensive equalization. It’s intended to replace your bass amp both live and in the studio.
If you need a full sounding amp simulator with a lot of EQ, the Sunset is for you. It features a five band equalizer with Treble, Bass, Parametric Midrange (with frequency and level controls), Resonance (for ultra lows), and Presence (for ultra highs). All are carefully tuned for bass guitar. But don’t let that hold you back if you’re a keyboard player. Pianos and synthesizers sound great with the Sunset!
The Sunset includes Gain and master Volume controls which allow you to add compression and classic tube amp growl. It has both ¼” phone and balanced XLR outputs - which lets you use it as a high quality active direct box. Finally, the Sunset features zero latency all analog circuitry – important for the instrument most responsible for the band’s groove.
Introducing the Sunset Bass Amp Simulator
- Zero Latency bass amp simulator.
- Go direct into the PA or DAW.
- Five Band EQ:
- Treble and Bass controls.
- Parametric midrange with level and frequency controls.
- Presence control for extreme highs.
- Resonance control for extreme lows.
- Gain control to add compression and harmonics.
- Master Volume.
- XLR and 1/4" outputs.
- Full bypass.
- 9VDC, 200mA.
Artwork by Aaron Cheney
MAP price: $210 USD ($299 CAD).
PG contributor Tom Butwin reveals his favorite songwriting secret weapon: the partial capo. Watch how the Shubb C7 and C8 can simulate alternate tunings without retuning your guitar—and spark fresh creative ideas instantly.
Shubb C8b Partial Capo for Drop-D Tuning - Brass
The C8 covers five of the six strings, leaving either the low E or high E string open, depending on how it's positioned.
- Standard setup: Placed on the 2nd fret while leaving the low E string open, it simulates Drop D-style sounds—except you're still in standard tuning (key of E). You get that big, droning bass feel without retuning.
- Reverse setup: Flipping the capo allows the high E string to ring, giving you shimmering drones and new melodic options across familiar chord shapes.
- A flexible tool that lets you simulate alternate tunings and create rich sonic textures—all while keeping your guitar in standard tuning.
Shubb C7b Partial Capo for DADGAD Tuning - Brass
The C7 covers three of the six strings—either D, G, and B or A, D, and G—depending on how it's flipped.
- Typical setup (D, G, B): Creates an open A chord shape at the 2nd fret without needing your fingers. This frees you up for new voicings and droning notes in the key of A.
- Reversed setup (A, D, G): Gets you close to a DADGAD-style tuning vibe, but still keeps you in standard tuning—great for modal, spacious textures often found in folk or cinematic guitar parts.
Use it alone or stack it with the C8 for wild, layered effects and truly out-of-the-box inspiration.
PRS Guitars celebrates 40 years with the limited edition McCarty SC56. Featuring vintage-inspired design and modern innovations, this single-cutaway guitar pays tribute to Ted McCarty and his impact on the industry. With only 400 pieces available, this instrument is a must-have for collectors and performers alike.
PRS Guitars today announced the 40th Anniversary McCarty SC56 Limited Edition. With a classic PRS single-cutaway body shape and carefully chosen specifications, the McCarty SC56 is both a tribute to tradition and a reliable tool for the modern performer. Only 400 pieces will be made.
“The SC56, signifying Singlecut and 1956, model is our most recent tribute to my late mentor Ted McCarty and his impact on the guitar industry. We started with our take on a classic late ‘50s singlecut body. 1956 marks the year that Ted first had guitars made with his newly coined 'humbucker' pickups. It also happens to be the year I was born. Bringing vintage design into the modern era, we loaded this model with our McCarty III pickups, meticulously designed to deliver warm, clear, vintage tone with exceptional note separation and dynamics,” said PRS Guitars Founder & Managing General Partner, Paul Reed Smith.
Anchored by a maple top and mahogany back, the 24.594” scale length and 22-fret Pattern Vintage neck work with Phase III non-locking tuners and PRS two-piece bridge to promote its musical sustain. The PRS McCarty III pickups are controlled by a simple layout — two volume controls, two tone controls, and a three-way toggle on the upper bout.
Single-cutaway guitars are known to be heavier than their double-cutaway counterparts. The McCarty SC56 Limited Edition design incorporates weight-relief, decreasing the weight of the guitar by about 2/3 of a pound, while maintaining several points of attachment between the guitar top and back to eliminate the “hollow” sound of the cavities and promote tone transfer.
With appointments like binding on the fretboard, classic bird inlays, and a vintage-inspired nitrocellulose finish, the 40th Anniversary McCarty SC56 Limited Edition blends heritage and innovation into a timeless instrument.
PRS Guitars continues its schedule of launching new products each month in 2025.
For more information, please visit prsguitars.com.