A formidable 100-watt, EL34-powered flamethrower spans decades of big-Brit-amp history.
Two channels and four gain-range modes of awesome clean-to-fiery Brit tones. Multiple power modes. Switchable master volume. High quality construction.
Shared EQ reduces ability to create contrasting tones between channels.
$2,399
Victory VS100 Super Sheriff
victoryamps.com
Victory Amps is, not surprisingly, well versed in big, classic British amp sounds. And the new U.K.-built Super Sheriff VS100 head marks another strong entry from the company in the high-wattage realm. The VS100 is a single-input, 100-watt, two-channel head. It’s simple on the surface. But with gain range mode switches for each channel, you effectively get four gain channels spanning ’80s metal textures, blues, and ’60s and ’70s British rock. And while the Super Sheriff boils over with iconic British sounds, its versatility takes it beyond obvious Marshall-style tone templates. With its wide gain range, flexible tone-shaping capabilities, and boutique-level attention to detail, it’s a formidable high-power alternative.
Victory Amps VS100 Super Sheriff Review by premierguitar
Behind the Jailhouse Doors
The Super Sheriff head is available in two versions: a 27"-wide body designed to sit atop 4x12 cabinets, or a more compact 19.1" version that fits the company’s vertical 2x12 cabs. The chassis is housed in a reinforced wood enclosure with cooling vents on the top, front, and back. The two channels—vintage and hot rod—can be switched via the front panel or a supplied footswitch. A second footswitch, as well as two switches on the main control panel, selects the gain structure, which determines the gain range for each channel. There are also two master volume controls, and you can use the channel-select footswitch to move between different master volume settings in creative ways. This flexibility is enabled by a push button on the rear panel which makes it possible to assign a master volume control to its respective channel or use the two master volumes globally so you can use two different output settings within each channel.
The Super Sheriff’s preamp section utilizes four ECC83 preamp tubes, while the power section is outfitted with four EL34 tubes, providing a 100-watt output in full-power mode. A low-power mode reduces power tube plate and bias voltages, decreasing the output power to 30-35 watts. Output power modes are switched via a 3-way front panel switch that also functions as the standby switch in the center position. A mains power rocker switch on the back-panel enables globe-hopping players to switch between 230 or 115 volts, and a custom 3-tap output transformer, meanwhile, supports 4-, 8-, or 16-ohm loads.
In both vintage gain structure modes, the Super Sheriff is responsive to picking and guitar-volume dynamics.
The flexibility doesn’t stop there. The VS100 is designed to function with a variety of power tubes, including 6L6s, KT77s, 5881s, 6CA7s, and more, and external back panel bias test points make power tube swaps easy without consulting a tech. A low-impedance series effects loop with ¼" send and return jacks is situated on the back panel. Both channels work flawlessly with pedals in the loop.
Tone Patrol
The 3-band EQ and presence control are clearly inspired by classic Marshall tone stacks. The frequency response is discernibly similar, too, but the voicing accommodates more extreme, high-gain settings. Presence is adjusted by two front-panel-mounted controls—a standard rotary knob and a 2-way presence shift switch, which changes the frequency range regulated by the presence control. Presence shift 1 attenuates frequencies above 5 khZ. Presence shift 2 sounds more traditional and, to my ear, offers enhanced harmonics. The presence knob is super responsive and makes fine-tuning the high end a breeze.
Shaping the bass response is easy, too. Though it is situated on the back panel, the rotary depth control enables you to dial in more focus and intensity in the low end. An associated push button moves between tight mode, which emphasizes low-mid content and sounds punchier, or loose mode, which adds thickness and low-end resonance. Altogether it’s a highly versatile set of controls that’s well suited to the wide range of gain on tap, but which also makes it easy to dial up great sounds regardless of pickups, guitar, or cabinet.
Old School or Nu School?
Switching between the vintage and hot rod channels, and their respective gain structure settings, is like taking a tour of English high-gain amp history. The vintage channel offers rich low end and a mid-forward character that’s perfect for single-coil pickups. Vintage 1 is the cleaner of the two gain structures, and here the Super Sheriff behaves like a JTM45 with extra headroom. Situating the gain below 12 o’clock delivers high headroom and clean tones that are articulate with little to no breakup. Push the gain past the midway point, though, and a hint of gentle compression and hair starts to emerge. At 3 o’clock and beyond, you hear chunky drive with a clear open top. The vintage 2 gain structure is the crunchier big brother to vintage 1, and sounds a lot like a stock JCM800. Low-gain settings are slightly dark, but if you push the gain past 1 o’clock, you hear more upper midrange and harmonics. AC/DC fans will be very happy here. In both vintage gain structure modes, the Super Sheriff is responsive to picking and guitar volume dynamics.
The hot rod channel, inspired by the modded JCM800s that ruled the 1980s, features much higher gain and an aggressive edge. Compared to the vintage channel, bass response is decreased and midrange content around 900 kHz is pushed to the fore. The hot rod 1 gain structure ranges from a medium overdrive to searing lead tones. Hot rod 2 happily veers into modern metal territory, too. Increasing the gain adds significant compression and a harmonic lift from 3 kHz and higher, lending the output a distinct glassiness. If you push the gain past 3 o’clock in hot rod 2 mode, you will note traces of fizziness. But it’s easy to hear how these settings would work well with detuned guitars or baritones with extra low end that can offset the added sizzle.
The Verdict
The VS100 Super Sheriff captures the essence of big British amp tones but offers flexibility that transcends any one vintage amp. With veteran amp designer Martin Kidd at the helm, the team at Victory Amplification lovingly crafted a flexible, modern vehicle for tapping into decades worth of Marshall-style sounds. That range, the tones, and quality construction make the Super Sheriff a deal, in spite of the high-end price.
- Victory V40 Deluxe Review ›
- Victory V4 The Copper Guitar Amp Review ›
- 8 Guitar-Amp Mods for Newbies ›
- Conquer Your Sound with Victory Amps: The Deputy Amp Demo ›
Analog modulation guided by a digital brain willing to get weird.
Fun, fluid operation. Capable of vintage-thick textures at heavier gain settings. High headroom for accommodating other effects.
MIDI required to access more than one preset—which you’ll probably long for, given the breadth of voices.
$369
Kernom Elipse
If you love modulation—and lots of it—you can eat up a lot of pedalboard space fast. Modulation effects can be super-idiosyncratic and specialized, which leads to keeping many around, particularly if you favor the analog domain. TheKernom Elipse multi-modulator is pretty big and, at a glance, might not seem the best solution for real estate scarcity. Yet the Elipse is only about 1 1/4" wider than two standard-sized Boss pedals side by side. And by combining an analog signal path with digital control, it makes impressive, efficient use of its size—stuffing fine-sounding harmonic tremolo, phaser, rotary-style, chorus, vibrato, flanger, and Uni-Vibe-style effects into a single hefty enclosure. Many of the effects can also be blended and morphed into one another using a rotary control aptly called “mood.” The Elipse, most certainly, has many of those.
Modulator With Many Masks
Anywhere pedal hounds meet and chat you’ll encounter spirited talk about the way pedals sound relative to a certain gold standard. It makes sense. Benchmarks are useful for understanding anything. But one of the things I like best about the Kernom Elipse is how it eludes easy comparison to such standards, and how the fluidity of its controls make it sound unique. As with any review, I compared the Elipse to as many pedals as I have that are relevant. Here, that included an Ibanez analog chorus, Phase 90 and Small Stone phasers, an optical Uni-Vibe-style pedal, a Boss BF-2,Mu-Tron Phasor II clone, and more. But what made the Elipse stand out in this company was function as much as sound. Operating the Elipse with an open mind, rather than a quest to replicate another pedal’s sound, leads to intriguing, unique, and unusual tones more specialized modulators don’t always offer.
“The Elipse is pretty ambitious for an analog modulator, but doesn’t spread itself too thin.”
Three of the Elipse’s controls—speed, mix, and depth—function predictably. The latter two controls, however, change function depending on the pedal’s mood (or mode). In tremolo mode, setting the mix at noon generates complex, warbly, and elastic harmonic tremolo-like textures. At maximum, it shifts to a more binary, on/off sound akin to optical or bias tremolo. In chorus/vibrato mode, the noon position marks a 50/50 wet/dry mix of pitch shift and dry signal—the ingredients for any chorus. At maximum, the signal is 100 percent wet, yielding pure pitch-shift vibrato. The shape control, meanwhile, adjusts the LFO waveform. In tremolo mode that means moving between triangle- and sine-wave pulses. The swirl control is the wild card of the bunch. It adds big-time dimension to the Elipse in all modes. Through most of its range, it slathers slow phase on whatever modulation is already bubbling and burbling. In the latter third of its range, though, it also adds gain, and by the time you reach maximum, the output is discernibly thickened in the low-midrange zone. The gain and low-mid bump helps compensate for the perceived volume loss intrinsic to modulation. But they also excite different segments of the harmonic spectrum as you manipulate other modulation-shaping parameters—adding expansiveness as well as the thickness you might miss from vintage modulators.
Enunciation Modulation
Compared to many of the modulation pedals I used for contrast, the Elipse has a high-mid-forward voice. This frequency bias has advantages. It lends most of the Elipse’s modulation textures a clear, airy essence that keeps their character present when adding fuzz or big delay and reverb effects. It makes some modulations less chewy, but it’s also easy to imagine such textures slotting easily into a mix where some thicker analog modulators would gobble up harmonic space.
The basic EQ profile also makes it easier to probe the nuances in the “in-between” voices, living in the liminal spaces between pedal moods. When you start to play with these blended textures and various blends of drive, shape, mix, and depth, you encounter many sounds that veer from vintage templates in cool ways. Lathering on gain from the swirl control and lazy depth rates made the hybrid chorus/flange intense, dreamy, and enveloping. Similar blends of slow, heavy harmonic tremolo and rotary speaker sounded massive too.
The Verdict
The Elipse is pretty ambitious for an analog modulator, but doesn’t spread itself too thin. Players looking for one or two very specific modulation sounds might find the interrelationships between the Elipse’s controls too complex. The inability to save more than a single onboard preset without a MIDI switcher might frustrate guitarists used to all-digital pedals’ preset capabilities. Players that already have MIDI switchers in their rigs, however, could fall hard for the ability to switch between Elipse’s myriad, complex, analog-colored textures. With or without MIDI, it is an excellent analog modulator that offers colors galore.
An easy guide to re-anchoring a loose tuning machine, restoring a “lost” input jack, refinishing dinged frets, and staunching a dinged surface. Result: no repair fees!
This late-’90s Masterbilt was made to mimic the feeling and look of vintage luxury.
This collaborative effort between Japanese and American guitar builders aimed for old-school quality without breaking the bank.
I recently called a rideshare to pick me up from the airport and was surprised when the driver pulled up in a Jaguar. I’d never been in one and was stunned at how quiet it was, and how the backseat was as comfortable as a living room couch, but retained a refined look. This 1998 Masterbilt prototype reminds me of that airport ride.
Some guitars just feel expensive. Not in an “I shouldn't be touching this, lest I scratch it” way so much as simply exuding luxury. Maybe it’s the flawless ebony fretboard, making gliding up and down the neck feel like ice skating. Or perhaps it’s the slim, ’60s-style neck shape which felt instantly comfortable in my small hands. It may have something to do with the sumptuously low 2/32" action at the 12th fret, requiring hardly any effort to play.
Makes sense, considering this guitar’s origin story. Mac Yasuda was born in Nishinomiya, Japan. At 15, he discovered the music of Hank Snow and fell in love with country music and the guitar itself. He stole a classical guitar from his cousin (“He never played it,” said Yasuda) and started a band with his friends. Yasuda traveled to the States in the ’70s and after picking up his first vintage guitar from a pawn shop, he was hooked. He began scoping out gear for his friends, which eventually grew into a shop called Mac’s Guitar Gallery in Kobe, Japan. By the ’90s, he estimated he had owned between 4,000 and 5,000 instruments, and his collection was valued at $3 million. He has authored several books about vintage guitars and is widely considered one of the world's preeminent authorities on the subject.
Yasuda is also an accomplished musician. While in Nashville in the ’80s—perhaps for one of the half-dozen times he’s performed on theGrand Ole Opry—he met Greg Rich, an instrument designer who was then head of Gibson’s banjo division. Yasuda enlisted Greg Rich and another guitar maker named Mark Taylor to produce a line of high-quality, vintage-style instruments under the name Masterbilt. “Vintage guitars are fine, but they're limited,” said Yasuda at the time. His Masterbilt guitars would give us mere mortals the chance to get a taste of the luxurious feel of a fine vintage instrument. Masterbilt debuted at NAMM in 1997, and it’s still unknown how many guitars were actually produced. The trademark of the Masterbilt name was cancelled in 2005 and has since been used by other brands, like Epiphone.
“Some folks think anything from the ’80s or before is vintage, but perhaps the fact that time has continued to march on should be factored in.”
Fanny's House of Music believes this guitar to be an early prototype, one of six ever made. Three were sunburst and three were natural. Playing it feels like playing any fine vintage 335; funny when you consider that at 27 years old, some would consider this Masterbilt vintage itself. The notion of what is considered truly “vintage” is hotly debated on Reddit every few months. Some folks think anything from the ’80s or before is vintage, but perhaps the fact that time has continued to march on should be factored in. Some guitars from the ’80s are now 45 years old! We consider guitars from the ’90s to be vintage at this point, so this 1998 Masterbilt prototype fits right in.
This Masterbilt is now 27 years old. In your books, does that make it a “vintage” guitar?
Photo by Madison Thorn
It’s a good example of how history and passion can intersect to create something special. This guitar tells a story of dedication to quality and an appreciation for the feel of a well-made instrument. Whether or not a 27-year-old guitar qualifies as “vintage” may be up for debate, but the magic in this guitar definitely isn’t. If you’re ever in Nashville, stop by Fanny’s and take it for a spin. You might find yourself feeling a bit like I felt after my unexpected ride in a Jaguar: getting a glimpse into the world of understated elegance, where refinement isn't about flash but about experiencing something crafted to near perfection.
SOURCES: namm.com, Los Angeles Times, Blue Book of Guitar Values, Vintage Guitar, Guitar-List.
Unleash your inner metal icon with the Jackson Lee Malia LM-87, a high-performance shred-ready axe designed in collaboration with Bring Me The Horizon guitarist Lee Malia. Featuring custom Jackson signature pickups, a fast D-profile neck, and a TOM-style bridge for rock-solid stability, this signature model is a must-have for commanding metal tone and smooth playability.
British metal icon and Bring Me The Horizon guitarist Lee Malia has partnered with Jackson to create his signature LM-87, a shred-ready axe built for heavy riffing and alternative modern metal. As a founding member and lead guitarist of the Grammy-nominated band, Malia is renowned for his aggressive playing style and intricate solos. This high-performance guitar matches his demanding musicality.
With its offset Surfcaster™ body shape and vintage appeal, the LM-87 melds classic design with modern appointments. The thin open pore finish on the bound Okoume body and neck exudes organic style, while the unique 3-ply pickguard and chrome hardware add striking accents. The fast D-profile 3- piece okoume neck allows smooth riffing across the bound amaranth fingerboard.
Custom Jackson signature pickups, including a bridge humbucker with push-pull coil-split, equip the LM-87 with versatile tone-shaping options to fulfill Malia's sonic vision. The TOM-style bridge with anchored tailpiece and fine tuners provides rock-solid stability for low tunings and heavy picking.
Designed in close collaboration with the legendary guitarist, the Jackson Lee Malia LM-87 is built for shredding. Its blend of vintage vibe and high-performance features make this signature model a must-have for players who value commanding metal tone and smooth playability.
The Tune-o-matic bridge with an anchored tailpiece and fine tuners offers enhanced tuning stability and precise, incremental adjustments. This setup ensures consistent pitch control, improved sustain, and easier fine-tuning without affecting overall string tension.
The guitar’s three-piece set-neck guitar with graphite reinforcement offers exceptional strength, stability, and resistance to warping. The multi-piece construction enhances sustain and tonal clarity, while the graphite reinforcement adds extra durability and prevents neck shifting due to humidity or temperature changes. This design ensures a solid, reliable performance with improved resonance and longevity.
Features Include:
- Okoume body
- Three-piece okoume set neck construction with graphite reinforcement
- 12"-16" compound radius amaranth fingerboard
- 3-ply pickguard
- Chrome hardware
- Custom wound Jackson LM-87 pickups
- Volume with push-pull coil-split and tone control
- TOM-style bridge with anchored tailpiece and fine tuners
- Gig bag included
The Jackson LM-87 carries a street price of $899.99.
For more information, please visit jacksonguitars.com.